Surface shape measurement by phase-shifting digital holography with a wavelength shift

Surface contouring by phase-shifting digital holography is proposed and verified by experiments and numerical simulations. Digital holograms are recorded before and after mode hopping of a laser diode subject to current tuning, and the difference of the reconstructed phases at each wavelength is computed to deliver surface contours of a diffusely reflecting surface. Since normal incidence on the object is employed, the method does not need the removal of the tilt component and is free from the shadowing effect as advantages over the dual-incidence method proposed before by the first author.     

Difference displacement measurement by digital holography by use of simulated wave fronts

A concept called fringe compensation was first presented in phase-shifting electronic speckle-pattern interferometry. We apply a similar principle to digital holographic interferometry; here the phase of a wave front is known and can be manipulated. The basic mathematical formulation of fringe compensation and some experimental results are shown with relatively large, simple rigid-body rotation and circular membrane deformation.     

Size measurement of bubbles in a cavitation tunnel by digital in-line holography

Digital in-line holography (DIH) with a divergent beam is used to measure size and concentration of cavitation bubbles (6-100 μm) in hydrodynamic facilities. A sampling probe is directly inserted in the cavitation tunnel, and the holograms of the bubbles are recorded through a transparent test section specially designed for DIH measurements. The recording beam coming from a fiber-coupled laser diode illuminates the sample volume, and holograms are recorded by a CMOS camera. From each hologram, the sampling volume can be reconstructed slice by slice by applying a wavelet-based reconstruction method. Because of the geometry of the recording beam, a magnification ratio must be introduced for recovering the 3D location and size of each bubble. The method used for processing holograms recorded in such a configuration is presented. Then, statistical results obtained from 5000 holograms recorded under different pressures in the cavitation tunnel are compared and discussed.     

Remote metrology by comparative digital holography

A method for the remote comparison of objects with regard to their shape or response to a load is presented. The method allows interferometric sensitivity for comparing objects with different microstructure. In contrast to the well-known incoherent techniques based on inverse fringe projection this new approach uses the coherent optical wave field of the master object as a mask for the illumination of the sample object. The coherent mask is created by digital holography to allow instant access to the complete optical information of the master object at any place desired. The mask is reconstructed by a spatial light modulator (SLM). The optical reconstruction of digital holograms with SLM technology allows modification of reconstructed wavefronts with respect to improvement of image quality, the skilled introduction of additional information about the object (augmented reality), and the alignment of the master and test object.     

Full-field vibrometry with digital Fresnel holography

A setup that permits full-field vibration amplitude and phase retrieval with digital Fresnel holography is presented. Full reconstruction of the vibration is achieved with a three-step stroboscopic holographic recording, and an extraction algorithm is proposed. The finite temporal width of the illuminating light is considered in an investigation of the distortion of the measured amplitude and phase. In particular, a theoretical analysis is proposed and compared with numerical simulations that show good agreement. Experimental results are presented for a loudspeaker under sinusoidal excitation; the mean quadratic velocity extracted from amplitude evaluation under two different measuring conditions is presented. Comparison with time averaging validates the full-field vibrometer.     

Encrypting three-dimensional information with digital holography

A method for optical encryption of three-dimensional (3D) information by use of digital holography is presented. A phase-shifting interferometer records the phase and amplitude information generated by a 3D object at a plane located in the Fresnel diffraction region with an intensity-recording device. Encryption is performed optically by use of the Fresnel diffraction pattern of a random phase code. Images of the 3D object with different perspectives and focused at different planes can be generated digital or optically after decryption with the proper key. Experimental results are presented.     

Three-dimensional angle measurement based on propagation vector analysis of digital holography

We propose what we believe to be a novel method for highly accurate three-dimensional (3D) angle measurement based on propagation vector analysis of digital holography. Three-dimensional rotations in space can be achieved by use of a CCD camera and a multifacet object, which reflects an incident wave into different directions. The propagation vectors of the reflected waves from the object can be extracted by analyzing the object spectrum of the recorded hologram. Any small rotation of the object will induce a change in the propagation vectors in space, which can then be used for 3D angle measurement. Experimental results are presented to verify the idea.     

Three-dimensional displacement measurement for diffuse object using phase-shifting digital holography with polarization imaging camera

The amount of displacement of a diffused object can be measured using phase-shifting digital holography with a polarization imaging camera. Four digital holograms in quadrature are extracted from the polarization imaging camera and used to calculate the phase hologram. Two Fourier transforms of the phase holograms are calculated before and after the displacement of the object. A phase slope is subsequently obtained from the phase distribution of division between the two Fourier transforms. The slope of the phase distribution is proportional to the lateral displacement of the object. The sensitivity is less than one pixel size in the lateral direction of the movement. The longitudinal component of the displacement can be also measured separately from the intercept on the phase axis along the phase distribution of the division between two Fourier transforms of the phase holograms.     

Polarization imaging by use of digital holography

We present what we believe to be a new digital holographic imaging method that is able to determine simultaneously the distributions of intensity, phase, and polarization state at the surface of a specimen on the basis of a single image acquisition. Two reference waves with orthogonal polarization states interfere with the object wave to create a hologram that is recorded on a CCD camera. Two wave fronts, one for each perpendicular polarization state, are numerically reconstructed in intensity and phase. Combining the intensity and the phase distributions of these two wave fronts permits the determination of all the components of the Jones vector of the object-wave front. We show that this method can be used to image and measure the distribution of the polarization state at the surface of a specimen, and the obtained results indicate that precise quantitative measurements of the polarization state can be achieved. An application of the method to image the birefringence of a stressed polymethyl methacrylate sample is presented.     

Distortion-tolerant three-dimensional object recognition with digital holography

We present a technique to implement three-dimensional (3-D) object recognition based on phase-shift digital holography. We use a nonlinear composite correlation filter to achieve distortion tolerance. We take advantage of the properties of holograms to make the composite filter by using one single hologram. Experiments are presented to illustrate the recognition of a 3-D object in the presence of out-of-plane rotation and longitudinal shift along the z axis.     

Light-in-flight digital holography display

We present a digital speckle-pattern interferometric setup that can be operated at TV frame rates (30 ms) to display the locus of the points at which the optical-path difference between the reference and object beams is within the coherence length. Experimental results are shown.     

Refractometry of microscopic objects with digital holography

Digital holography has some desirable properties for refractometry of microscopic objects since it gives phase and amplitude information of an object in all depths of focus from one set of exposures. We show that the amplitude part of the image can be used to observe how the Becke lines move between different depths of focus and hence determine whether an object has a higher or a lower index of refraction than its surrounding medium, i.e., the sign of the relief. It is also shown that one single-phase image provides an independent technique to determine the sign of relief between an object and the surrounding medium.     

Detection of surface strain by three-dimensional digital holography

Three-dimensional digital holography with three object-illuminating beams has been successfully used for the detection of surface strain in metallic objects. The optical setup that uses illuminating beams to irradiate the object from three directions means that all three object surface displacement components, x, y, and z, can be independently calculated and used to find the strain gradients on the surface. The results show the conversion of the complete surface displacement field into a surface strain field. The method is capable of measuring microstrains for out-of-plane surface displacements of less than 10 microm.     

Parallel three-step phase-shifting digital holography

We propose parallel three-step phase-shifting digital holography as a technique capable of noiseless instantaneous measurement of three-dimensional objects based on phase-shifting interferometry. The proposed digital holography carries out three-step phase shifting at the same time by using a phase-shifting array device located in the reference beam. The array device has a periodic three-step phase distribution, and its configuration is simplified compared with that required for conventional parallel phase-shifting digital holography. Therefore the optical system of the proposed parallel phase-shifting digital holography is more suitable for the realization of the proposed holography. We conduct both a numerical simulation and a preliminary experiment. The results of the simulation and experiment agree well with those of the conventional phase-shifting method and are superior to the results obtained by conventional digital holography by using the Fresnel transform alone. Thus the effectiveness of the proposed technique is verified.     

Phase-error correction in digital holography

The quality of images computed from digital holograms or heterodyne array imaging is degraded by phase errors in the object and/or reference beams at the time of measurement. This paper describes computer simulations used to compare the performance of digital shearing laser interferometry and various sharpness metrics for the correction of such phase errors when imaging a diffuse object. These algorithms are intended for scenarios in which multiple holograms can be recorded with independent object speckle realizations and a static phase error. Algorithm performance is explored as a function of the number of available speckle realizations and signal-to-noise ratio (SNR). The performance of various sharpness metrics is examined in detail and is shown to vary widely. Under ideal conditions with >15 speckle realizations and high SNR, phase corrections better than lambda/50 root-mean-square (RMS) were obtained. Corrections better than lambda/10 RMS were obtained in the high SNR regime with as few as two speckle realizations and at object beam signal levels as low as 2.5 photons/speckle with six speckle realizations.     

Parallel two-step phase-shifting digital holography

We propose a parallel two-step phase-shifting digital holography technique capable of instantaneous measurement of three-dimensional objects, with a view toward measurement of dynamically moving objects. The technique is based on phase-shifting interferometry. The proposed technique carries out the two-step phase-shifting method at one time and can be optically implemented by using a phase-shifting array device located in the reference beam. The array device has a periodic two-step phase distribution, and its configuration is simplified compared with that required for three-step and four-step parallel phase-shifting digital holographies. Therefore the optical system of the proposed technique is more suitable for the realization of a parallel phase-shifting digital holography system. We conduct both a numerical simulation and a preliminary experiment in the proposed technique. The results of the simulation and the experiment agree well with those of sequential phase-shifting digital holography, and results are superior to those obtained by conventional digital holography using the Fresnel transform alone. Thus the effectiveness of the proposed technique is verified.     

数字同轴和数字离轴全息系统分析

利用最高空间频率分析法,通过逐点分析记录在 CCD 上的空间频率信息,研究了物体可允许记录的最大横向尺寸、最小记录距离、全息图的信息量、空间分辨力、再现像的横向分辨力、轴向分辨力及散斑大小,并得到了数学表达式。理论分析和实验结果表明,数字同轴全息系统放宽了对 CCD 分辨力的要求,有较高的分辨力,较低的散斑噪声、灵活、简单的系统结构及较高的 CCD 空间带宽利用率,在增强系统性能方面要优于数字离轴全息系统。这一研究为数字全息系统的设计和操作提供了一定的理论和实验指导。     

Shift-invariant three-dimensional object recognition by means of digital holography

We present an optoelectronic method to analyze three-dimensional (3D) scenes that is able to detect the presence, and also the position and orientation, of a reference 3D object. The data-acquisition procedure is based on digital holography. A phase-shifting interferometer records a single digital Fresnel hologram of the 3D scene with an intensity-recording device. Holographic information of the 3D reference object is also obtained with the same method. Correlation techniques are then applied to recognize the presence and position of the 3D reference object in the 3D scene. The technique also allows us to detect the 3D reference with a small out-of-plane rotation. Preliminary experimental results are presented that demonstrate the theory.     

High-resolution digital holography utilized by the subpixel sampling method

A novel (to our knowledge) approach for resolution improvement in digital holography is presented in this paper. The proposed method is based on recording the incoming interference field on a complementary metal-oxide semiconductor (CMOS) camera with subpixel resolution. The method takes advantage of the small pixel size of the CMOS sensor, while overcoming the reduced fill factor. This paper describes the experimental and numerical procedures. The improvement of the obtainable optical resolution, image quality, and phase measurement accuracy are demonstrated within this paper.