开关电容高Q陷波电路的实现

本文从理论和设计两方面说明开关电容高Q陷波电路也可以通过Q倍增结构实现。采用这种结构还可以减小电路的电容比和总的电容值,从而减小制造芯片时的面积.     

新型高Q值U形缺陷地结构带阻滤波器

提出了一种新型的U形缺陷地结构(DGS)单元,该单元可以用来设计高Q值带阻滤波器。减小U形DGS结构两臂的槽宽及槽之间的距离,或在U形槽内加上贴片,可以增大Q值。最后用三个级联的U型DGS结构设计了一个高Q值的带阻滤波器,实验结果表明所设计的滤波器的Q值为35.3。     

一款应用于多频带的基于新型Cascode有源电感的高Q带通滤波器

设计了一款基于新型Cascode有源电感和有源负阻电路的二阶差分有源带通滤波器。新型有源电感和有源负阻电路的采用可实现在滤波器Q值不变的条件下对滤波器的中心频率进行调节。仿真结果表明,通过调节有源电感和有源负阻电路的偏置条件,可有效增大滤波器的Q值,且在保持Q值恒定在226的条件下中心频率的变化范围为0.2-3.7GHz。滤波器的以上特性使其能很好地应用于多频带的无线系统。     

基于CCCⅡ的双二阶电流模式多功能滤波器结构

提出了一种基于CCCⅡ的三输入单输出多功能电流模式双二阶滤波器结构.该滤波器结构简单,仅包含两个MOCCCⅡ,一个电阻和两个接地电容.该结构通过选择不同的输入端和输出端可以得到4个三输入单输出二阶多功能滤波电路,这4个电路均可以实现低通、高通、带通、带阻、全通滤波功能,并且角频率ω<,0>和品质因素Q可以实现独立可调,具有很低的无源和有源灵敏度.     

模拟跨阻低通滤波器的设计

跨阻滤波器的输入为电流信号,输出为电压信号.本文给出了跨阻滤波器的设计方法,并按照品质因数Q的低、中、高详细介绍了三种双二阶节跨阻低通滤波器的电路拓扑结构及其参数计算方法.二阶跨阻低通滤波器与传统滤波器相级联即可实现高阶跨阻低通滤波器.最后,通过高阶跨阻低通滤波器的设计实例,验证文中所给出的设计方法的有效性.     

一种高Q值高线性度SiGe HBT有源电感

提出了一种高Q值、高线性度SiGe HBT有源电感。基于NPN SiGe HBT共发射极-共基极-共集电极结构,引入有源负阻网络,以提高有源电感的Q值。采用前馈电流源,提高了有源电感的线性度。基于0.35 μm SiGe BiCMOS工艺对有源电感进行了仿真验证,并分析了该有源电感的电感值、Q值以及线性度。该有源电感适用于对Q值、线性度要求较高的射频电路。     

新型多功能开关电流双二次滤波器

本文提出了一种具有较低灵敏度和正反两相输出的开关电流(SI)改进型通用积木块(MUB),可以实现抽样数据信号处理的各种基本运算.据此,以开关电容电路为原型,采用信号流图方法生成了一种新型SI高Q双二次滤波器,可获得低通、高通、带通和带阻等多种滤波功能。     

单电流传输器实现的Q增强二阶带通滤波器

本文提出了几种用单块电流传输器(CCII)实现的Q增强二阶带通滤波电路。这些电路使用的元件较已见报道的同类电路和用运算放大器(OA)实现的同类电路少;适当选择元件参数,还可实现RCD串联谐振器。     

一种新的利用运放极点的有源滤波器

本文提出一种新的由一个运放、一个电容和几个电阻组成的有源滤波器电路。该电路充分利用了运放的极点,能实现低通、高通、带通、带阻和全通网络功能。作为带阻滤波器时,不仅能独立地调节ω_0与Q,并能调节阻带衰减。文中给出了计算实例与实验结果。     

通用电流模式双二次节的实现

文中基于ＫＨＮ电路结构，使用第二代改进电流传送器，提出二阶滤波器的电流模式实现电路，该电路能实现低通，带通，高通，全通，带阻及陷波等各种二阶滤波器函数。同时该电路具有输入阻抗低，输出阻抗高、元件灵敏度低等优点，易于级联实现各种高阶电流滤波器函数，另外该电路也便于集成实现。     

SIR带状线带阻滤波器的设计

将具有阻带特性的微带马刺线结构引入到带状线中,设计了一款中心频率为2.32 GHz,相对带宽为9.5%,阻带衰减为50 dB的三阶马刺线式带阻滤波器。相比于传统的并联开路短截线型带阻滤波器,马刺线式带阻滤波器的横向尺寸大为减小,结构更加紧凑。采用SIR(stepped-impedance resonator)结构,按相同指标设计了一款三阶SIR马刺线式带阻滤波器。与马刺线式带阻滤波器相比,SIR马刺线式带阻滤波器结构更为紧凑,纵向尺寸缩小约17%,并具有更好的谐波抑制特性。     

A Tunable Bandstop Resonator Based on a Compact Slotted Ground Structure

A new slotted ground structure featuring compact size and spurious-free passband in the context of microstrip lines is proposed. The compactness of the new structure originates from the lengthened coupling gap in the ground. The spurious-free response in a wide passband is a result of combining both narrow and wide slots in the new structure, which effectively forms a stepped-impedance slot resonator. Compared to the previously proposed dumbbell- and H-shaped defected ground structure, over 40% size reduction can be realized in the new structure. The new structure also provides flexibilities in introducing additional functionalities to the bandstop resonators. By embedding varac- tors in the slotted ground structure, tunable bandstop resonators can be implemented and 13% tuning range centered at 2.36 or 2.67 GHz have been obtained.     

New Narrow-Band Dual-Mode Bandstop Waveguide Filters

A complementary relation between a dual-mode bandpass and bandstop waveguide filter is found. Then a new idea for constructing a bandstop filter is developed. Two trial samples of bandstop filters are constructed to demonstrate the principle.     

A Compact E-Shaped Patterned Ground Structure and Its Applications to Tunable Bandstop Resonator

In this paper, an E-shaped patterned ground microstrip bandstop resonant cell is proposed. In comparison to other bandstop resonators, it provides the advantages of a high-$Q$ factor, and a sharp transition knee within a small circuit area. This resonant cell is applied to the design of a tunable bandstop resonator. Due to the unique E-shaped pattern etched in the ground plane, the proposed resonant cell is able to provide tuning function within a small circuit area.      

Waveguide Sandwich Filters

A new class of waveguide filters is introduced, constructed from several thin plates sandwiched together. The combination of alternate plates having large and small rectangular apertures leads to a propagating structure which possesses a bandstop response and prescribed characteristic impedance. This basic element may be used as a simple compact bandstop filter, particularly where the main passband and stopband are well separated, such as in harmonic rejection. For filters with many stopbands, combinations of several waveguide sandwich filter elements are used to provide the main passband and the required attenuation characteristics in the prescribed stopbands. Although the filter is ideally suited for bandstop filtering due to its small size, low cost, low loss, and high power handling capability, additional applications to bandpass filtering and dispersive delay line operation are also cited.     

Flattened Broadband Notch Filters Using Guided-Mode Resonance Associated With Asymmetric Binary Gratings

In this letter, the broadband notch filter exhibiting a flattened bandstop spectral response is experimentally demonstrated for the first time by using the guided-mode resonance associated with the periodic subwavelength structure possessing asymmetric binary grating profiles. The proposed filter consisting of grating and waveguide structures is realized by utilizing a single-layer poly-silicon film deposited on a quartz substrate. The asymmetric grating profile is carried out by dividing the one-filling-factor binary structure into the one with two distinct filling factors within one identical period. A flat bandstop spectral response at the central wavelength of 1.22 mum is obtained under normal incidence for transverse-electric polarization. Its transmittance of bandstop spectrum can be suppressed as low as -20dB within a broad spectral range of 85 nm and its corresponding Deltalambda/lambda is larger than 6%. The spectra under oblique incidence are demonstrated to verify the proposed filter has a high immunity for the angular deviation up to 20deg     

Compact resonant bandpass filter based on PBG structure

A new resonant bandpass filter based on a photonic band gap (PBG) structure is designed and optimised. The finite-difference time-domain method is applied to characterise the proposed filter. The filter is much easier to fabricate, more compact and simpler to design than the conventional parallel-coupled line filter, has wide stopband and steep and deep upper bandstop. The filter length is about one guiding wavelength (/spl lambda/e). A semiconductor-based structure is realised using microelectronics technology and good agreement between the experimental and simulation results has been achieved.     

Dual-band bandpass filters using equal-length coupled-serial-shunted lines and Z-transform technique

A synthesizing method is presented to design and implement digital dual-band filters in the microwave frequency range. A dual-band filter consists of a bandstop filter and a wide-band bandpass filter in a cascade connection, wherein the transfer functions of both the bandpass filter and bandstop filter are expressed in the Z domain. The bandstop filter is implemented by using a coupled-serial-shunted line structure, while the wide-band bandpass filter is constructed by using a serial-shunted line configuration. In particular, the bandwidth of each passband of the dual-band filter is controllable by adjusting the characteristics of both the bandpass filter and bandstop filter. By neglecting the dispersion effect between microstrip lines of different widths over a wide bandwidth, a dual-band filter is realized in the form of microstrip lines and its frequency responses are measured to validate this method.     

基于新型带阻谐振单元的双频带阻滤波器设计

基于螺旋交指结构设计了一种新型的带阻谐振单元,并采用全波仿真软件对其进行分析。仿真结果表明,在此谐振单元中存在2个较窄的阻带,改变单元结构的尺寸可分别控制2个阻带的位置。在此基础上,采用2个单元级联的方式设计并加工了一款具有优越电磁性能的结构紧凑的双频带阻滤波器。采用矢量网络分析仪对所设计的滤波器进行测试,测试和仿真结果吻合较好,2个阻带的中心频率为3.30GHz和4.93GHz,对应的阻带带宽分别为3.23³.37GHz和4.733.37GHz和4.73⁵.10GHz,阻带边缘陡峭度大于90dB/GHz,所设计的带阻滤波器具有优越的性能。此外,该滤波器的有效尺寸为24.0mm×5.2mm,与传统带阻滤波器相比较,小型化优势明显。     

应用EBG结构抑制电磁干扰的研究

电磁带隙结构(EBG)是一种周期性结构,具有明显的带阻特性。首先介绍了EBG结构的特点,通过理论分析计算和仿真,阐述了其禁带形成的原因,依据EBG结构所具有性质的特点,分析了该结构对表面电流的影响。并利用EBG结构带阻特性以及影响表面电流的特性,将其应用于抑制表面电流从而减小电磁干扰(EMI)。通过仿真建模实验、数据测量得到的结果,说明了将EBG结构应用于抑制电磁干扰的可行性。