Monitoring the embrittlement of reactor pressure vessel steels by using the Seebeck coefficient

The degree of embrittlement of the reactor pressure vessel (RPV) limits the lifetime of nuclear power plants. Therefore, neutron irradiation-induced embrittlement of RPV steels demands accurate monitoring. Current federal legislation requires a surveillance program in which specimens are placed inside the RPV for several years before their fracture toughness is determined by destructive Charpy impact testing. Measuring the changes in the thermoelectric properties of the material due to irradiation, is an alternative and non-destructive method for the diagnostics of material embrittlement. In this paper, the measurement of the Seebeck coefficient () of several Charpy specimens, made from two different grades of 22 NiMoCr 37 low-alloy steels, irradiated by neutrons with energies greater than 1 MeV, and fluencies ranging from 0 up to 4.5 × 10¹⁹ neutrons per cm², are presented. Within this range, it was observed that increased by ≈500 nV/°C and a linear dependency was noted between and the temperature shift ΔT_41 J of the Charpy energy vs. temperature curve, which is a measure for the embrittlement. We conclude that the change of the Seebeck coefficient has the potential for non-destructive monitoring of the neutron embrittlement of RPV steels if very precise measurements of the Seebeck coefficient are possible.     

Spectroscopic characterisation of a cross-flow plasma jet

The aim of this work is to study the thermal characteristics and electron density based on atomic and molecular emission of a new plasma jet at atmospheric pressure. The novelty of our jet is its generation with a single electrode, the plasma gas flowing perpendicularly to the RF powered electrode (13.56 MHz, 10³ V). Optical emission of the plasma was collected in two ways: the normal viewing mode and the axial viewing mode. The plasma characteristic parameters as function of helium flow-rate, plasma power and position of the investigated zone were studied. The excitation, vibrational and rotational temperatures are in the range of 1500-2350 K, 3500-4400 K and 450-1100 K, respectively. The electron number densities are in the range of 10¹³-10¹⁴ cm⁻³. For qualitative observations regarding the atomic and molecular processes in the plasma we used the relative intensities of the most representative lines of He, N₂, O, H and .     

Reflection properties of small hydrocarbons impinging on tungsten and carbon surfaces

Sticking coefficients of deuterium from are quantified on fusion relevant plasma sprayed tungsten and carbon fibre composite in the incident energy range from about 0-100 eV. The samples that were cut from ASDEX-Upgrade tiles are exposed to a beam of of specific incident energy, E_inc, in the tandem mass spectrometer BESTOF in Innsbruck. Nuclear reaction analysis is performed ex-situ at IPP Garching for the quantification of deuterium content. The deuterium content difference measured on a spot before and after ion-beam exposure of the sample is assigned to the above mentioned species of hydrocarbon molecules sticking on the surface, allowing the calculation of the sticking probability of a specific deuterated molecular ion. The sticking coefficient, S, is found to depend on the incident energy and shows a maximum of about S ∼ 0.4 around E_inc = 30 eV on CFC and about S ∼ 0.1 near E_inc = 20 eV in case of PSW.     

Cold atoms photoassociation with intense laser pulses

We study the vibrational dynamics produced when two cold atoms are photoassociated in a diatomic molecule by an intense laser pulse (with the duration of hundreds ps), inducing a resonance condition at small interatomic distances. The example analysed is the population transfer from the continuum to the 1_g(6s + 6p_3/2) excited electronic potential of the Cs₂ molecule, at a temperature T ≈ 0.11 mK. We use a non-perturbative treatment by following the wavepackets dynamics on the ground and excited surfaces. We show that cold molecules can be efficiently produced in both ground and excited electronic potentials.     

Analysis of oxygen potential of (U0.7Pu0.3)O2±x and (U0.8Pu0.2)O2±x based on point defect chemistry

Stoichiometries in (U_0.7Pu_0.3)O_2±x and (U_0.8Pu_0.2)O_2±x were analyzed with the experimental data of oxygen potential based on point defect chemistry. The relationship between the deviation x of stoichiometric composition and the oxygen partial pressure P_O2 was evaluated using a Kröger-Vink diagram. The concentrations of the point defects in uranium and plutonium mixed oxide (MOX) were estimated from the measurement data of oxygen potentials as functions of temperature and P_O2. The analysis results showed that x was proportional to near the stoichiometric region of both (U_0.7Pu_0.3)O_2±x and (U_0.8Pu_0.2)O_2±x, which suggested that intrinsic ionization was the dominant defect. A model to calculate oxygen potential was derived and it represented the experimental data accurately. Further, the model estimated the thermodynamic data, and , of stoichiometric (U_0.7Pu_0.3)O_2.00 and (U_0.8Pu_0.2)O_2.00 as −552.5 kJ·mol⁻¹ and −149.7 J·mol⁻¹, and −674.0 kJ · mol^-1 and −219.4 J · mol⁻¹, respectively.     

Linear free energy relationship applied to trivalent cations with lanthanum and actinium oxide and hydroxide structure

Linear free energy relationships for trivalent cations with crystalline M₂O₃ and, M(OH)₃ phases of lanthanides and actinides were developed from known thermodynamic properties of the aqueous trivalent cations, modifying the Sverjensky and Molling equation. The linear free energy relationship for trivalent cations is as , where the coefficients a_MvX, b_MvX, and β_MvX characterize a particular structural family of MvX, r_M³⁺ is the ionic radius of M³⁺ cation, is the standard Gibbs free energy of formation of MvX and is the standard non-solvation free energy of the cation. The coefficients for the oxide family are: a_MvX = 0.2705, b_MvX = −1984.75 (kJ/mol), and β_MvX = 197.24 (kJ/mol nm). The coefficients for the hydroxide family are: a_MvX = 0.1587, b_MvX = −1474.09 (kJ/mol), and β_MvX = 791.70 (kJ/mol nm).     

The investigation of energy loss and damage in polycarbonate induced by MeV carbon clusters

Carbon cluster ions (n = 1-5) and Cl⁺, Ti⁺, Ni⁺ ions were used to bombard polycarbonate (PC) films. By comparing the electronic energy loss and the number of chromophores at a fixed wavelength, we obtained the electronic energy loss S_e of carbon cluster ions in PC.     

Electrochemical and spectrophotometric study on trivalent neodymium ion in molten binary mixtures of LiCl and alkali earth chlorides

The thermodynamic stability of Nd(III) complexes was studied by electrochemical techniques for molten binary mixtures composed of LiCl and an alkali earth chloride, CaCl₂, SrCl₂, or BaCl₂ at 923 K. The Gibbs free energy change of formation of Nd(III) in the melts was determined. The obtained values showed a good correlation with the polarizing power of solvent cations. The Nd(III) complex was more stable in the melts with low polarizing power. The electronic absorption spectrum of the hypersensitive f-f transition of Nd³⁺ was investigated to obtain information about the structural change of the complex. The estimated oscillator strength of the ⁴G_5/2,²G_7/2 ← ⁴I_9/2 transition and the degree of the energy splitting in electronic energy levels showed different trends upon the polarizing power for each of added alkali earth chloride. This indicates that the coordination environments further from second neighbors could have significant impact on the electronic energy levels of Nd(III) in the mixtures including alkali earth cations.     

Oxygen potential of (U0.88Pu0.12)O2±x and (U0.7Pu0.3)O2±x at high temperatures of 1673-1873 K

The oxygen potential of (U_0.88Pu_0.12)O_2±x (−0.0119 < x < 0.0408) and (U_0.7Pu_0.3)O_2±x (−0.0363 < x < 0.0288) was measured at high temperatures of 1673-1873 K using gas equilibrium method with thermo gravimeter. The measured data were analyzed by a defect chemistry model. Expressions were derived to represent the oxygen potential based on defect chemistry as functions of temperature and oxygen-to-metal ratio. The thermodynamic data, and , at stoichiometric composition were obtained. The expressions can be used for in situ determination of the oxygen-to-metal ratio by the gas-equilibration method. The calculation results were consistent with measured data. It was estimated that addition of 1 wt.% Pu content increased oxygen potential of uranium and plutonium mixed oxide by 2-5 kJ/mol.     

First-principles study on electronic structures and absorption spectra for BaWO4 crystal containing barium vacancy

The electronic structures, dielectric function and absorption spectra for the perfect BaWO₄ (BWO) crystal and the BWO crystal containing barium vacancy () have been studied using density functional theory code CASTEP with the lattice structure optimized. The results indicate that the optical properties of the BWO crystal exhibit anisotropy and its optical symmetry coincide with lattice structure geometry of the BWO crystal. For the BWO crystal containing , there exhibit four absorption bands peaking at 0.71 eV (1751 nm), 1.85 eV (672 nm), 3.43 eV (362 nm) and 3.85 eV (322 nm), respectively. The origins of the 370 nm absorption band should be related to the .     

380 keV proton irradiation effects on photoluminescence of Eu-doped GaN

The effect of 380 keV proton irradiation on the photoluminescence (PL) properties has been investigated for undoped and Eu-doped GaN. As the proton irradiation exceeds , a drastic decrease of PL intensity of the near band-edge emission of undoped GaN was observed. On the other hand, for Eu-doped GaN, the PL emission corresponding to the ⁵D₀→⁷F₂ transition in Eu³⁺ kept the initial PL intensity after the proton irradiation up to . Present results, together with our previous report on electron irradiation results, suggest that Eu-doped GaN is a strong candidate for light emitting devices in high irradiation environment.     

Morphology and interface structure of α-Fe2O3 islands grown on sapphire by ion-implantation and annealing

The morphology and interface structure of α-Fe₂O₃ islands grown on α-Al₂O₃ single crystals (sapphire) by Fe-ion-implantation and annealing in an oxidizing atmosphere have been studied using transmission electron microscopy. The α-Fe₂O₃ islands have the orientation relationship of and with sapphire. The typical outline of α-Fe₂O₃ islands consists of two (0 0 0 1) and six planes. The interfaces between α-Fe₂O₃ islands and sapphire are semicoherent, that is coherent regions separated by misfit dislocations at the interfaces. When imaged along the direction, the projected Burgers vector is determined to be . When imaged along the direction, the projected Burgers vector is determined to be . These misfit dislocations form a network structure at the interface to accommodate the mismatch between the lattices of the α-Fe₂O₃ and the α-Al₂O₃.     

Study of the electronic structures of oxygen doped in LiBaF3 crystal

The most likely substituting positions of impurity oxygen ions in LiBaF₃ crystals are studied using the general utility lattice program (GULP). The calculated results indicate that the main defect model is [] in the O:LiBaF₃ crystal. The electronic structures of the LiBaF₃ crystal with the defect [] are calculated using the DV-Xα method. It can be concluded from the electronic structures that the LiBaF₃ crystal with the defect [] will exhibit a 217-280 nm absorption band and the impurity oxygen will decrease core-valence luminescence yield.     

Ion implantation in 4H-SiC

Silicon carbide offers unique applications as a wide bandgap semiconductor. This paper reviews various aspects of ion implantation in 4H-SiC studied with a view to optimise ion implantation in silicon carbide. Al, P and Si ions with keV energies were used. Channelling effects were studied in both a-axis and c-axis crystals as a function of tilts along major orthogonal planes and off the major orthogonal planes. Major axes such as [0 0 0 1] and the and minor axis like the showed long channelling tails and optimum tilts for minimising channelling are recommended. TEM analyses of the samples showed the formation of (0 0 0 1) prismatic loops and the loops as well,in both a and c-cut crystals. We also note the presence of voids only in P implanted samples implanted with amorphising doses. The competing process between damage accumulation and dynamic annealing was studied by determining the critical temperature for the transition between crystalline and amorphous SiC and an activation energy of 1.3 eV is extracted.     

Development of secondary ion mass spectroscopy using medium energy C60 ion impact

In this paper, we report time-of-flight (TOF) secondary ion mass spectroscopy using primary C₆₀ ions with an energy range from several tens of keV to several hundreds of keV. Application of the spectroscopy to the analysis of a poly(amino acid) film revealed that characteristic peaks, necessary for identification of the amino acid in proteins, show higher intensities for medium energy C₆₀ (120 keV and 540 keV ) impacts than those for low energy C₆₀ (30 keV ) impacts. This finding demonstrates that medium energy C₆₀ ion impacts are useful for highly sensitive characterization of amino acids.     

Computer simulation of high-energy-beam irradiation of single-crystalline silicon

The structural relaxation caused by the high-energy-beam irradiation of single-crystalline silicon was simulated by the molecular dynamics method. As the initial condition, high thermal energy was supplied to the individual silicon atoms within a cylindrical region of nanometer-order radius located in the center of the specimen. The Tersoff potential was assumed as the interaction mechanism between silicon atoms. The supplied thermal energy was first spent to change the crystal structure into an amorphous one within a short period of about 0.3 ps; then it diffused in the specimen by an ordinary thermal dissipation process. The amorphized track radius R_a was determined as a function of the energy density of the thermalized region. It was found that the relationship between R_a and the effective stopping power gS_e follows the relation , which is similar to the formula derived on the basis of the thermal spike model [G. Szenes, J. Nucl. Mater. 336 (2005) 81]. It was also found that the mechanism of structural transition changes at the thermalized region of 1 nm radius.     

Guiding and blocking of highly charged ions through a single glass capillary

Highly charged ions produced in an electron beam ion trap, I^q+, q = 10-50, were transmitted through a tapered glass capillary having diameter of at the end. We found that for a particular beam current, there exists an optimum tilting angle of the capillary in which a steady output of ions is observed, while for smaller angles, the ion counts first rise, then gradually decay on a time scale of minutes. In the case of steady transmission, the charge state distribution is found to be slightly towards the lower side.     

Saturation in deuterium retention of CFC graphite targets exposed to beryllium-seeded plasmas on PISCES-B

ITER strike-plates are foreseen to be of carbon-fiber-composite (CFC). In this study the CFC bulk deuterium retention in ITER-relevant conditions is investigated. DMS 701 (Dunlop) CFC targets were exposed to plasma in PISCES-B divertor plasma simulator. Samples were exposed to both pure deuterium plasma and beryllium-seeded plasma at high fluences (up to ) and high surface temperature (1070 K). The deuterium contents of the exposed samples have been measured using both thermal-desorption-spectrometry (TDS) during baking at 1400 K and ion beam nuclear reaction analysis (NRA). The total deuterium inventory has been obtained from TDS while NRA measured the deuterium depth distribution. In the analysed fluence range at target temperature of 1070 K, no fluence dependence was observed. The measured released deuterium is . In the case of target exposure with beryllium-seeded plasma no change in the released amount of deuterium was found. The deuterium concentration inside the samples is almost constant until the probed depth of ?m, except in the first 1 μm surface layer, where it is 5 times higher than in the bulk. No C erosion/redeposition was observed in the Be-seeded plasma cases. The measured retention, applied to 50 m² of ITER CFC surface, would imply a tritium saturated value of 0.3 gT, much lower than the ITER safety limit of 350 g.