ION EXCHANGE PROPERTIES OF THE SODIUM PHLOGOPITE AND BIOTITE

ABSTRACT

The ion exchange behavior of three sodium micas (phlogopite, Ward's Sci.; phlogopite, Suzorite Inc., biotite, Ward's Sci.) towards Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺. Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺ Hg²⁺, Co²⁺, Cu²⁺ Cd²⁺ and Zn²⁺ ions has been studied. The ion exchange isotherms of alkali, alkaline earth and some other divalent cations were determined and concentration equilibrium constants as a function of metal loading and temperature were analyzed. Sodium micas exhibit high affinity for heavy alkali metals with the selectivity order Rb⁺ > Cs⁺ > K⁺. By studying the cesium uptake in the presence of NaNO₃, CaCl₂, NaOH, NaOH+KOH, HNO₃ electrolytes (in the range of 0.01–6 M) it was found that sodium micas could remove cesium efficiently in neutral and alkaline media, which make them promising for certain types of nuclear waste treatment.     

Proton-Ionizable Crown Compounds: Transport of Alkali and Alkaline Earth Cations Using Proton-Ionizable Triazolo Macrocycles

Abstract

The macrocycle-mediated flaxes of the alkali and alkaline earth metal cations have been determined in a H₂O-CH₂Cl₂-H₂O bulk liquid membrane system. Water-insoluble proton-ionizable macrocycles of the triazolo type were used. The proton-ionizable feature allows the coupling of cation transport to reverse H⁺ transport. This feature offers promise for the effective separation and/or concentration of alkali metal ions with the metal transport being driven by a pH gradient. A counter anion in the source phase is not co-transported. Transport of the alkali cations only occurred when the source phase pH was greater than the aqueous pK_a value for the carriers. Transport increased regularly with increasing source phase pH. Transport of alkaline earth cations from neutral pH source phases was minimal. The alkali cation selectivity order was K⁺ > Rb⁺ > Cs⁺ > Na⁺ > Li⁺ for the l8-crown-6 sized macrocycles, while little selectivity was observed with the 15-crown-5 sized macro-cycle.     

Interactions of Some Hofmeister Cations with Sodium Dodecyl Sulfate in Aqueous Solution

In this work, we have investigated the influence of some alkali metal ions on the Krafft temperature (T_K) and critical micelle concentration (CMC) of a classical ionic surfactant, sodium dodecyl sulfate (SDS), over a wide range of temperature. The alkali metal cations such as Li⁺, Na⁺, Cs⁺, and K⁺ are found to affect the solubility and hence the T_K of the surfactant. It was observed that kosmotropic Li⁺ lowers the T_K of the surfactant. Due to the common ion effect, the solubility of SDS decreases in the presence of Na⁺, resulting in an increase in the T_K. On the other hand, chaotropic K⁺ and Cs⁺, capable of forming contact ion pairs with the chaotropic dodecyl sulfate ion, lower the solubility and hence elevate the T_K. In terms of decreasing the T_K, the ions follow the trend: Li⁺ > Na⁺ > Cs⁺ > K⁺ except for 0.0025 M CsCl. The added cations screen the charge of the micelle surface and facilitate closer packing of the surfactant with a consequent decrease in the CMC. In terms of the effectiveness in lowering the CMC, the ions follow the order: Cs⁺ > K⁺ > Na⁺ > Li⁺. In the presence of added electrolytes, the γ_CMC values are found to be lower than the corresponding values in pure water. The thermodynamic parameters (Gibbs free energy, enthalpy, and entropy changes) of micellization were calculated to gain insights into the mechanism of the process.     

Synthesis of poly(hemispherand) via cyclopolymerization of diepoxide

Summary Cyclopolymerization of 2,6-bis[3-(4,5-epoxy-2-oxapentyl)-2-methoxy-5-methylphenyl]-4-methylanisole was carried out with cationic, anionic, and coordination catalysts. The polymers obtained with BF₃·OEt₂ or SnCl₄ in dichloromethane and with t-BuOK in DMSO were soluble in benzene, chloroform, and THF. The mole fractions of the cyclic units in these polymers were from 0.65 to 0.75. The resulting poly(hemispherand) bound alkali metal cations and the selectivity was in the order of Rb⁺>K⁺>Cs⁺>Na⁺>Li⁺.     

SYNTHETIC INORGANIC ION-EXCHANGE MATERIALS. XLVIII. ION-EXCHANGE REACTION OF ALKALI METAL IONS/H+ ON MONOCLINIC ANTIMONIC ACID

The pH titration curves of monoclinic antimonic acid (M-SbA) showed apparently monobasic acid for the systems of alkali metal ions/H⁺. The uptake order of the metal ions were K⁺ < Rb⁺ < Cs⁺ < Na⁺ < Li⁺ throughout the pH range studied. The low uptakes of K⁺, Rb⁺, Na⁺ and Cs⁺ at high pH might be due to steric or ion sieve effects for large unhydrated cations on M-SbA. Thermodynamic data were derived for Li⁺/H⁺ exchange on M-SbA from pH titration curve.     

Rapid Separation of Tl+ and Pb2+ from Various Binary Cation Mixtures Using Dicyclohexano-18-crown-6 Incorporated into Emulsion Membranes

Abstract

Relative transport rates of metal cation nitrates (Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, Tl⁺, Ca²⁺, Sr²⁺, Ba²⁺, and Pb²⁺) in a water-toluene-water emulsion membrane system were measured. The toluene component contained the surfactant Span 80 and the crown ether dicyclohexano-18-crown-6. The aqueous receiving phase contained Li₄P2O₇. When each metal cation was individually present in the aqueous source phase, metal extraction was complete within 10 min with the order of extraction being Tl⁺ > Cs⁺ > Ag⁺ > Rb⁺ > K⁺ ≥m Na⁺ and Pb⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ for uni-and bivalent cations, respectively. Significant extraction was found for all cations except Na⁺, K⁺, and Ba²⁺. Some metal ions were concentrated nearly 10-fold in a 10-min period. Relative transport rates were determined when binary cation mixtures of either Tl⁺ or Pb²⁺ were present at equal concentrations with each of the remaining metal ions in the source phase. Tl⁺, when present with either Na⁺, Cs⁺, or Rb⁺, was selectively extracted from the source phase. Complete and nearly exclusive extraction of Pb²⁺ was observed in the presence of all cations including Tl⁺. The enrichment ratios of Pb²⁺ in the binary mixtures were approximately 10 while those of the second cation were less than 0.5 except for Sr²⁺ which was 0.86. Corresponding separation factors for Pb²⁺ ranged from 1000 to > 6000.     

An experimental study of electroreduction of CO2 to HCOOH on SnO2/C in presence of alkali metal cations (Li+, Na+, K+, Rb+ and Cs+) and anions (HCO3−, Cl−, Br− and I−)

It is well-known that the electrolytes can influence the electrochemical reduction of carbon dioxide (ERCO₂) in aqueous media. In this work, we explore the effects of alkali metal cations and anions (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, HCO₃⁻, Cl⁻, Br⁻, I⁻) on the current density and product selectivity for the ERCO₂ into formic acid (HCOOH) on the SnO₂/carbon paper (SnO₂/C) electrode. Results of the ERCO₂ experiments show that for the cations, the promotion effects on current density and faradaic efficiencies (FEs) are in the order of Li⁺ < Na⁺ < K⁺ < Cs⁺ < Rb⁺. For the anions, the current density values are in the order of NaHCO₃ < NaCl < NaBr < NaI and KHCO₃ < KCl ≈ KI < KBr, respectively, and that on the FEs for the formation of the HCOOH (FE_HCOOH) is HCO₃⁻ < Cl⁻ < Br⁻ < I⁻. Based on this result, the effects of alkali metal cations and anions on ERCO₂ are discussed.     

Ion-Exchange Properties of lon-Sieve-Type Manganese Oxides Prepared by Using Different Kinds of Introducing Ions

Abstract

Three ion-sieve-type manganese oxides, HMnO(Li), HMnO(Na), and HMnO(K), were prepared by acid treatments of Li⁺-, Na⁺-, and K⁺-introduced manganese oxides, respectively. Three oxides were obtained from γ-MnO² and the corresponding alkali metal hydroxides by heating at 600°C. The ion-exchange properties of the adsorbents were investigated by pH titration, K_d measurements, and the adsorption of metal ions from seawater. The selectivity sequences of alkali metal ions were Na⁺ < Cs⁺ < Rb⁺ < K⁺ < Li⁺ for HMnO(Li) and Li⁺ Na⁺ < Cs⁺ < K⁺ < Rb⁺ for HMnO(Na) and HMnO(K). The high selectivity of Li⁺ on HMnO(Li) can be ascribed to an ion-sieve effect of spinel-type manganese oxide which was produced from LiMn₂O₄ Since HMnO(Na) and HMnO(K) had [2 × 2] tunnels of edge-shared [MnO₆] octahedra, the high selectivities of K⁺ and Rb⁺ on these samples were used to explain that the sizes of the [2 × 2] tunnels were suitable for filling ions of about 1.4 Å in radius in a stable configuration. The order of metal-ion uptake from seawater was Sr²⁺ < K⁺ < Mg²⁺ < Ca²⁺ < Na⁺ < Li⁺ for HMnO(Li), Li⁺ < Sr²⁺ < Mg²⁺ < Ca²⁺ < Na⁺ < K⁺ for HMnO(Na), and Li⁺ < Sr²⁺ < Ca²⁺ < Mg²⁺ < K⁺ < Na⁺ for HMnO(K).     

Extraction of Alkali Metal Tetraphenylborates by Polyurethane Foam

Abstract

The extraction of alkali metal tetraphenylborates by polyurethane foam was investigated. The extractability sequences are K⁺ ≈ Rb⁺ > Cs⁺ and K⁺ ≈ Rb⁺ ≈ Cs⁺ for polyether and polyester foams, respectively. The high extraction of K⁺ by polyether foam can be explained by the cation chelation mechanism.     

Preparation of unsaturated polyester–styrene beads using gamma irradiation and chemical polymerization routes for use in the recovery of some alkali metal ions

Suspension polymerization of unsaturated polyester–styrene was carried out in different media using different routes of polymerization. The effects of matrix type and concentration hold up, viscosity, irradiation dose, and the agitation speed on the resultant polymer characteristics were examined. The formed beads were physically identified using scanning electron microscopy, hardness, and particle size analysis techniques. They were smooth having typical spherical surfaces; the beads diameters were in the range of about 5–200 μm. The size of the resin beads was found to decrease with increase in the concentration and viscosity of the dispersant and impeller speed. The resultant beads were applied in the recovery of Li⁺, Na⁺, K⁺, and Cs⁺ ions from acidic media. The distribution coefficients of the alkali metal ions were calculated; the order of selectivity was Li⁺ > Na⁺ > K⁺ > Cs⁺ in case of the chemically processed resin beads, while the selectivity lies in the order of Li⁺ < Na⁺ < K⁺ < Cs⁺ in case irradiation processed ones. Finally, the economics of production of the unsaturated polyester–styrene resins using different methodologies was studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1149–1160, 2007     

The hydrogenation of toluene over nickel loaded Y zeolites

The catalytic activities of a range of hydrogen reduced nickel Y zeolites for the hydrogenation of toluene were measured and correlated with the following catalytic parameters: reaction temperature; reaction time; coke deposition. The role of the alkali metal co-cation (Li⁺, Na⁺, K⁺, Rb⁺ or Cs⁺) in influencing the overall hydrogenation activity of the supported nickel metal was probed. The effect of poisoning the surface Bronsted acidity by the adsorption of ammonia is discussed. For comparative purposes, data on the hydrogenation of benzene over the same catalysts are included.     

The catalytic dehydrogenation of cyclohexane and methylcyclohexane over nickel loaded Y zeolites

The dehydrogenation of cyclohexane to benzene and of methylcyclohexane to toluene was investigated over a range of nickel Y zeolites, varying the nickel content and the nature of the alkali metal co-cation (Li⁺, Na⁺, K⁺, Rb⁺ or Cs⁺). The overall reaction is viewed as occuring via a series of consecutive dehydrogenation steps. Catalytic activity is correlated with the reaction time, the reaction temperature, the level of Ni²⁺ exchange and the effects of pyridine adsorption. The level of dehydrogenation is strongly dependent on the mass of supported nickel metal and the surface Bronsted acidity. Catalyst deactivation results from the deposition of coke on the catalyst surface which is promoted with increasing zeolite acidity.     

Effects of alkali metal ion on imprinting GRIN microstructure in GeS2-Ga2S3-MCl (M=Na,K, Cs) glasses for visible to mid-infrared microgratings

Gradient refractive index (GRIN) micro-optics present unique opportunities for control of the chromatic properties, new degrees of freedom for optical design as well as the potential for use in new optical system applications. GRIN microgratings were imprinted in GeS₂-Ga₂S₃-MCl (M = Na, K, Cs) chalcohalide glasses by microthermal poling, and the effects of the type and concentration of alkali cations on their performance were investigated. Two effective imprinting formation regions of the GRIN microstructure based on the poling saturation voltage (U_s) and glass composition are observed at fixed poling time and temperature. The U_s increases from 140 to 750 and 2600 V in accordance with the activation energy (E_a) of alkali ions (Na⁺ to K⁺ and Cs⁺) increasing from 45.15 to 58.62 and 92.58 kJ/mol for studied samples. The saturated numbers of diffraction order (N_s) of the gratings in these samples are 7, 9 and 6, respectively, the highest number being provided by the K⁺-containing sample. This is in accordance with imprinting-induced phase differences (0.14λ, 0.19λ and 0.09λ) measured in the fabricated samples containing Na⁺, K⁺ and Cs⁺ ions. Furthermore, the U_s of samples decreases from 1500 to 300 V with four concentrations of K⁺ from 10 to 30%, associated with their E_a of K⁺ decreasing from 69.62 to 53.46 kJ/mol, while N_s increases from 8 to 14, which is attributed to the increase of the phase difference in the GRIN structures. The controllable GRIN microstructures are realized by adjusting the type and concentration of alkali cations in chalcohalide glasses, which is expected to drive the design of broadband GRIN microgratings.     

Electrochemical properties of modified copper-thallium hexacyanoferrate electrode in the presence of different univalent cations

The preparation of copper(II) hexacyanoferrate (CuHCF) films on the surface of gold electrodes as well as their characterization in solutions of various alkali metal and NH₄⁺ cations and in the presence of thallium(I) are described. The electrochemical quartz crystal microbalance and cyclic voltammetric techniques were used. In 0.50 M lithium nitrate, even at submillimolar concentration of Tl(I), the formal potential of CuHCF was shifted to more positive values. At higher Tl(I) concentrations, the formal potential of the CuHCF redox reaction changed linearly with the logarithm of Tl(I) concentration (in the 0.50 M solution of lithium or another alkali metal nitrate). From such dependencies, selectivity coefficients K_Tl/M were calculated, and they show that the CuHCF film on the gold electrode interacts preferentially with Tl(I). High affinity of Tl(I) to copper hexacyanoferrate, that was observed in the presence of alkali metal cations, was explained by relatively strong donor-acceptor interactions of Tl(I) ions with nitrogen in CN groups of the CuHCF film.It was also shown for simple M₄[Fe(CN)₆] metal ferrocyanate salts (where M = Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and Tl⁺) that there is a preferential interaction of Tl⁺ with CN group consistent with formation of a Tl-NC-Fe bridge.     

Electrochemistry-electrospray-mass spectrometry study of cesium uptake in nickel hexacyanoferrate films

The electrochemically-controlled uptake and release of Cs⁺ by nickel hexacyanoferrate thin-film electrodes that were prepared with different counter cations (Li⁺, Na⁺, K⁺, Rb⁺, or Cs⁺) were examined using a thin-layer flow cell coupled on-line with electrospray-mass spectrometry (ES-MS). A potential step technique was used to control the uptake and release of the cations by the films. Performance of the different films in terms of Cs⁺ capacity, Cs⁺ uptake selectivity versus the other alkali metal ions, film stability, and the effect of a saline matrix on Cs⁺ uptake were examined. These results show that the electrochemistry-mass spectrometry (EC-MS) combination provides rapid, Cs⁺ specific information concerning the films that is similar to or complementary to that information which might be obtained using conventional electrochemical approaches. Information that cannot be obtained electrochemically (e.g. isotopic distributions of metal ions accumulated and released) might also be gathered. Any number of electrode reactions involving ion uptake and release might be studied using this approach.     

Kinetic study on carbonation of crude Li<Subscript>2</Subscript>CO<Subscript>3</Subscript> with CO<Subscript>2</Subscript>-water solutions in a slurry bubble column reactor

Investigations were conducted to purify crude Li₂CO₃ via direct carbonation with CO₂-water solutions at atmospheric pressure. The experiments were carried out in a slurry bubble column reactor with 0.05 m inner diameter and 1.0 m height. Parameters that may affect the dissolution of Li₂CO₃ in the CO₂-water solutions such as CO₂-bubble perforation diameter, CO₂ partial pressure, CO₂ gas flow rate, Li₂CO₃ particle size, solid concentration in the slurry, reaction temperature, slurry height in the column and so on were investigated. It was found that the increases of CO₂ partial pressure, and CO₂ flow rate were favorable to the dissolution of Li₂CO₃, which had the opposite effects with Li₂CO₃ particle size, solid concentration, slurry height in the column and temperature. On the other hand, in order to get insight into the mechanism of the refining process, reaction kinetics was studied. The results showed that the kinetics of the carbonation process can be properly represented by 1−3(1−X)^2/3+2(1–X)=kt+b, and the rate-determining step of this process under the conditions studied was product layer diffusion. Finally, the apparent activation energy of the carbonation reaction was obtained by calculation. This study will provide theoretical basis for the reactor design and the optimization of the process operation.     

Synthesis and characterization of calix[4]arene-based copolyethers and polyurethanes. Ionophoric properties and extraction abilities towards metal cations of polymeric calix[4]arene urethanes

Copolyethers and polyurethanes containing lower and upper rim calix[4]arene units in the fixed cone conformation were prepared in good yield by polycondensation reactions of distal calix[4]arene diols with bisphenol-A/dibromomethane and 2,4-tolylendiisocyanate (TDI), respectively. In a similar way were prepared calix[4]arene-crown-5 and -crown-6 polyurethanes in the fixed 1,3-alternate conformation by condensation of TDI with lower rim calixcrown-5 and calixcrown-6 diols. However, the poor solubility in common organic solvents of the copolyether derivatives (M_w=11,100-11,600 g/mol) hampered further studies on their ionophoric properties. Aiming to obtain model compounds for the investigation of both extraction abilities and ionophoric properties of the polyurethane materials, several bis-urethanes were also synthesized by reaction of the calix[4]arene diols with p-tolylisocyanate (TI). The extraction ability measurements of monomeric and polymeric calix[4]arene urethanes (M_w=12,300-83,500 g/mol) towards alkali metal cations (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺) and Ag⁺showed a remarkable efficiency and selectivity of calixcrown-6 polyurethane toward Rb⁺, Cs⁺and Ag⁺.     

Counter‐ion‐specific helix formation of poly(γ‐methyl L‐glutamate) derivatives containing sulfonate group in aqueous alcohols

Charged polypeptides containing sulfonate groups were prepared by transesterification of poly(γ‐methyl L ‐glutamate) with isethionic acid. The coil–helix transition of the sulfonated polypeptides was investigated in aqueous alcohols. Marked counter‐ion specificity was observed for helix formation: Li⁺ < Na⁺ < Cs⁺ ≦ Rb⁺ ≦ K⁺; this was different to that for poly(L ‐glutamate) (PLG): Cs⁺ ? K⁺ < Li⁺ < Na⁺. Specific helix stabilization by counter‐ion mixing, which has been found for the PLG system, was not observed for the sulfonated polypeptides. The counter‐ion‐ and solvent‐specific helix formation is discussed and compared with that in PLG. © 2001 Society of Chemical Industry     

CO2 gasification of carbon catalysed by alkali metals: Reactivity and mechanism

A systematic study of the catalytic activity of alkali metal carbonates on the CO₂ gasification of activated carbon revealed the following order: Li < Na < K < Rb < Cs. Outgassing in an inert gas results in a pronounced activity decrease for Cs, whereas the other alkali metals show a slight increase. The activated carbon itself is unaffected. Apparent activation energies for the CO₂ gasification are also changed by outgassing and decrease from Li to Cs. Upon outgassing of the samples, CO₂ and CO are released in five distinguishable temperature regions, arising from decomposition of surface complexes and carbonate-like species, gasification phenomena and reduction of oxidic species. Outgassing patterns of all alkali metals are quite similar. During alkali-metal-catalysed gasification in CO₂ two types of oxidic species are present: surface bonded -OM species of high stability and oxidic species having less interaction with the carbon surface.     

Extraction of Alkali Metal Cations by Lipophilic Dibenzo-14-crown-4-carboxylic Acids

Abstract

The extraction of alkali metal cations by the lipophilic crown ether, bis-t-octylbenzo-14-crown-4 (BOB14C4), three derivatives of BOB14C4 having pendant carboxylic acid sidearms, and a lipophilic carboxylic acid, 2-methyl-2-heptylnonanoic acid (HMHN) was studied by two-phase potentiometric titration and ion-chromatography. The lipophilic, ionizable crown ethers, BOB14C4-acetic acid (BOB14C4AA), BOB14C4-propanoic acid (BOB14C4PA), and BOB14C4-oxyacetic acid (BOB14C4OAA) extract cations efficiently from aqueous mixed alkali metal chloride solutions into 1-octanol by an ion-exchange mechanism in the range p[H] > 7, as does HMHN. The mode of attachment of the ionizable sidearm, via an ether linkage (BOB14C4OAA) versus a carbon linkage (BOB14C4AA and BOB14C4PA), has a significant effect on the cation selectivity and extraction efficiency of these extractants. BOB14C4 exhibits no p[H] dependent extraction behavior and has no significant effect on the extraction of alkali metal cations by HMHN in a mixture of these two compounds. Although BOB14C4AA and BOB14C4PA extract cations at lower p[H] than HMHN, all three compounds exhibit similar selectivity for Li⁺ over Na⁺, K⁺, Rb⁺ and Cs⁺. A significant reversal in selectivity is observed with BOB14C4OAA, which extracts Na⁺ and K⁺ selectively over Li⁺, Rb⁺, and Cs⁺ and at significanty lower p[H] than BOB14C4AA, BOB14C4PA, or HMHN. The unique behavior of BOB14C4OAA may be attributed to the presence of the ether linkage between the crown ether and the pendant carboxylic acid.