Synthesis and structure of the cubane type [Fe2Sb(CO)5(η5-C5H5)]4 cluster

The [Fe₂Sb(CO)₅Cp]₄ (Cp=η⁵-C₅H₅) cluster has been obtained by the thermolysis of [Et₄N][{Fe(CO)₄}₂{Fe(CO)₂Cp}SbI]. The structure of the [Fe₂Sb(CO)₅Cp]₄·2toluene solvate has been determined by X-ray analysis. The cluster contains the cubane [Fe₄Sb₄] core. Each Sb serves as a μ₄-ligand between three iron atoms of the core and one of a terminal [Fe(CO)₂Cp] group.     

The synthesis and characterization of two new 19-vertex metallaborane clusters: [B18H20Ni(η5-C5H5)]−1 and [B18H19(2-THF)Ni(η5-C5H5)]

Two new 19-vertex metallaboranes, [B₁₈H₂₀Ni(η⁵-C₅H₅)][N(CH₃)₄] and [B₁₈H₁₉(2-THF)Ni(η⁵-C₅H₅)], were isolated from the reaction of anti-B₁₈H₂₂ with nickelocene, [Ni(η⁵-C₅H₅)₂], in high yields. The complexes were characterized by multinuclear NMR (¹H, ¹³C, ¹¹B), IR and UV–vis spectroscopy. Single-crystal X-ray diffraction analyses of these new complexes confirmed their structures as 19-vertex conjuncto-metallaborane clusters.     

Zirconocene complexes of the sterically demanding pentaphenylcyclopentadienyl ligand,CpPRO. Synthesis and characterization of CpPROZrCl3 and CpCpPROZrCl2 (Cp=η5-C5H5; CpPRO=η5-C5(C6H5)5)

The synthesis, characterization and X-ray structures of two zirconium complexes of the bulky pentaphenylcyclopentadienyl ligand, Cp^PRO, are reported. The monocyclopentadienyl 12 electron complex, Cp^PROZrCl₃ (I), has an unusual monomeric structure in the solid state and has short Zr–ligand distances. The Lewis acidity of this complex is manifested in its ability to catalyze the [4+2] cycloadditions of methyl- and ethylmethacrylate to cyclopentadiene. The sandwich complex, Cp^PROCpZrCl₂ (II), has more typical Zr–ligand distances, but has a more parallel arrangement of the two cyclopentadienyl rings.     

Theoretical study of the reactive intermediate Si2Me4[(η5-C5H4) Fe(CO)2] 2 2−

In two previous papers (Kinget al., J. Organomet. Chem. 19, 327, 1969; Pannellet al., Organometallics 9, 859, 1990), the synthesis and X-ray structure of the two tetramethyl disilyl complexes [(η⁵-C₅H₅) Fe(CO)₂]₂Si₂Me₄ (I) and Si₂Me₄[(η⁵-C₅H₄) Fe(CO)₂CH₃]₂ (II) were reported. ComplexII is obtained fromI [2]. However, attempts to form other derivatives fromI have generally failed. In the chemical process to getII fromI, an intermediate complex, Si₂Me₄[(η⁵-C₅H₄) Fe(CO)₂] ₂ ^2? (III), is probably formed. This is similar to complexII without the two methyl groups bonded to the Fe atoms. Therefore, a theoretical study that may shed some light on the intermediate structure, stability, and reactivity is justified. We have developed theoretical studies consisting of extended Huckel electronic structure calculations on the simulated intermediate geometry. The results obtained from these calculations suggest that it might be stable enough to form during reactions of complexI. The more reactive sites, which suggest reaction alternatives, are pointed out.     

Semi-rigid N-para-ferrocenyl(benzoyl)amino-acid esters for biomaterials: synthesis and characterization of Fc-C6H4CONHCH(R)CO2Me where Fc = (η5-C5H5)Fe(η5-C5H4) and R=H,CH3,CH2CH(CH3)2,CH2C6H5 and the X-ray crystal structures of Fc-C6H4CO2Me and the l-alanine derivative Fc-C6H4CONHCH(CH3)CO2Me

A series of N-para-(ferrocenyl)benzoyl amino-acid esters, para-Fc(C₆H₄)CONHCH(R)CO₂CH₃ {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄); R = H, CH₃, CH₂CH(CH₃)₂, CH₂C₆H₅}, 3–6 have been prepared by coupling para-(ferrocenyl)benzoic acid to the amino-acid esters (gly, l-Ala, l-Leu, l-Phe) using the standard 1,3-dicyclohexylcarbodiimide (DCC), 1-hydroxybenzotriazole (HOBt) protocol. The compounds were fully characterized by a range of spectroscopic techniques including FAB-MS. The X-ray crystal structures of the parent para-(ferrocenyl)benzoyl methyl ester, Fc-C₆H₄CO₂Me, 1 and a chiral derivative N-{para-(ferrocenyl)benzoyl}-l-alanine methyl ester, Fc-C₆H₄CONHCH(CH₃)CO₂Me, 4 have been determined.     

Electrochemical anion recognition by redox-responsive unnatural amino acid derivatives; the X-ray crystal structure of N-ferrocenoyl glycine methyl ester, (η5-C5H5)Fe(η5-C5H4)CONHCH2COOMe

N-Ferrocenoyl glycine ester derivatives FcCONHCH₂COOR (Fc=(η⁵-C₅H₅)Fe(η⁵-C₅H₄); R=methyl (1), ethyl (2) and benzyl (3)) have been prepared by coupling ferrocene carboxylic acid to a series of glycine esters using 1,3-dicyclohexylcarbodiimide (DCC), 1-hydroxybenzotriazole (HOBT) and Et₃N in CH₂Cl₂. The electrochemical anion sensing using a platinum microdisk working electrode of these N-ferrocenoyl glycine ester derivatives is reported. The crystal structure of 1 has been determined; principal dimensions are amide N(H)CO 1.229(3) Å, ester CO 1.183(3) Å with N–H⋯OC(amide) as the primary intermolecular hydrogen bond, N⋯O 2.804(3) Å.     

A novel route to titanium compounds containing cyclopentadienyl ligands with bromoethyl substituents; molecular structure of [(η5-C5H4CH2CH2Br)TiBr(μ-O)]4

Compounds (η⁵-C₅H₄CH₂CH₂OCH₃)TiCl₃, (η⁵-C₅H₄CH₂CH₂OCH₃)₂TiCl₂ and (η⁵-C₅H₄CH₂CH₂OCH₃)(η⁵-C₅H₅)TiCl₂ react with BBr₃ to give a high yield of titanium compounds containing cyclopentadienyl ligands with bromoethyl substituents, (η⁵-C₅H₄CH₂CH₂Br)TiBr₃ (1), (η⁵-C₅H₄CH₂CH₂Br)₂TiBr₂ (3) and (η⁵-C₅H₄CH₂CH₂Br)(η⁵-C₅H₅)TiBr₂ (4), respectively. Hydrolysis of 1 in the presence of tert-butylamine affords cyclo-[(η⁵-C₅H₄CH₂CH₂Br)TiBr(μ-O)]₄ (2) in quantitative yield. The molecular structure of 2 was determined by X-ray diffraction.     

Thermal dehydration of Y(TFA)3(H2O)3: Synthesis and molecular structures of [Y(μ,η1:η1-TFA)3(THF)(H2O)]1∞ · THF and [Y4(μ3-OH)4(μ,η1:η1-TFA)6(η1-TFA)(η2-TFA)(THF)3(DMSO)(H2O)] · 6THF (TFA = trifluoroacetate)

In order to obtain a better anhydrous precursor for various applications in materials science and catalysis, thermal dehydration reactions of Y(TFA)₃(H₂O)₃ (TFA = trifluoroacetate) (A) were investigated. Thermal treatment of A at different temperatures under vacuum (5 × 10^?2 mm) for several hours failed to give totally anhydrous yttrium trifluoroacetate (as indicated by IR). Two different complexes, a partially dehydrated [Y(μ,η¹:η¹-TFA)₃(THF)(H₂O)]_1∞·THF (1) and a partially hydrolyzed [Y₄(μ₃-OH)₄(μ,η¹:η¹-TFA)₆(η¹-TFA)(η²-TFA)(THF)₃(DMSO)(H₂O)] · 6THF (2), were obtained with good and moderate yield, respectively, by crystallization of two different thermally treated batches of A from THF (or THF + DMSO) at room temperature. More efficient dehydration of A could be achieved at 200 °C in a furnace, the obtained anhydrous yttrium tris-trifluoroacetate giving Y(TFA)₃(THF)₂ (3) on crystallization from THF. All the products were characterized by elemental analyses, FT-IR and ¹H NMR spectroscopy as well as thermo-gravimetric analysis. In addition, single crystal X-ray structures are reported for 1 and 2, which show either a terminal (η¹ and η²) or bridging (μ,η¹:η¹) bonding behavior of the TFA ligand.     

Hydrothermal synthesis,crystal structure and physical properties of {[Gd(H2O)4(μ2-C6NO2H5)2Gd(H2O)4](μ3-C6NO2H4)2(ZnCl3)2} · 2H2O · 2Cl

A bimetallic 4f–3d tetranuclear complex {[Gd(H₂O)₄(μ₂-C₆NO₂H₅)₂Gd(H₂O)₄](μ₃-C₆NO₂H₄)₂(ZnCl₃)₂} · 2H₂O · 2Cl (1) has been synthesized via hydrothermal reaction and structurally characterized by single-crystal X-ray diffraction. Complex 1 is characterized by a tetranuclear Gd₂Zn₂ structure with the gadolinium and zinc atoms interconnected by isonicotinic acid ligands. The tetranuclear species of {[Gd(H₂O)₄(μ₂-C₆NO₂H₅)₂Gd(H₂O)₄](μ₃-C₆NO₂H₄)₂(ZnCl₃)₂} link to isolated chlorine ions and water molecules via π?π interactions and hydrogen bonds to yield a 3-D supramolecular framework. Photoluminescent investigation reveals that the title complex displays an emission in ultraviolet region. The solid-state diffuse reflectance spectra of 1 reveal the presence of a sharp optical gap of 3.66 eV.     

LiBa1.5[B5O8(OH)3]: A new 1-D metal borate chain constructed from B5O9(OH)36 − cluster units

A new mixed metal borate LiBa_1.5[B₅O₈(OH)₃] (1) has been hydrothermally synthesized and structurally characterized by FT-IR spectroscopy, powder X-ray diffraction, single crystal X-ray diffraction, and thermogravimetric analysis, respectively. 1 crystallizes in the monoclinic system, space group C2/c, a = 11.2839(7) Å, b = 7.3974(4) Å, c = 20.7151(13) Å, β = 103.392(6)°, V = 1682.10(17) ų and Z = 8. The structure consists of infinite one-dimensional (1-D) borate chains constructed from B₅O₉(OH)₃^6 − cluster units. These BO chains are further linked by the Ba^2 + and Li⁺ cations to form a 3-D framework.     

Synthesis of the sterically constrained ligand precursor cyclopentadienyl-2,6-diphenylbenzene and structure of [(2,6-Ph2–C6H3-η5-C5H4)Zr(NEt2)3]

A Pd-catalysed Stille coupling of 2,6-diphenyliodobenzene with tributylcyclopentadienyltin gave the sterically constrained ligand precursor cyclopentadienyl-2,6-diphenylbenzene (1). Treatment of this precursor with tetrakis(diethylamido)zirconium(IV) gave the three-legged piano-stool complex [(2,6-Ph₂–C₆H₃-η⁵-C₅H₄)Zr(NEt₂)₃] (2). Complex 2 was characterised by ¹H- and ¹³C{¹H}-NMR spectroscopy as well as by X-ray crystallography which showed significant distortions of the three-legged piano-stool geometry as a result of steric interactions with the bulky aryl substituent.     

Molecular structure of [In2(μ,η1-OR)(μ,η2-OR)(η2-OR)3(η1-OR)] R = C2H4NMe2, a pincer ligand

Functional indium [In(OR)₃]_m alkoxides (R = C₂H₄OMe, C₂H₄NMe₂) have been obtained by alcoholysis of In[N(SiMe₃)₂]₃ and characterised by elemental analysis, FT-IR and NMR spectroscopy. The 2-dimethylaminoethoxide was characterised by X-ray diffraction. It corresponds to the association of two InO₆ octahedra giving the unsymmetrical dimer [In₂(μ,η¹-OR)(μ,η²-OR)(η²-OR)₃(η¹-OR)] (2). 2 was used as a pincer ligand toward Cu(acac)₂.     

Metallaborane reaction chemistry: Part 8. Phenylacetylene trimerisation by [6,6,6-(PPh3)2H-nido-6-IrB9H13] and the structure of [2-(η6-C6H3Ph3)-closo-2-IrB9H8-10-(PPh3)] by synchrotron X-ray diffraction analysis

The microwave-heated reaction between PhCCH and [6,6,6-(PPh₃)₂H-nido-6-IrB₉H₁₃] gives [2-(η⁶-C₆H₃Ph₃)-closo-2-IrB₉H₆-10-(PPh₃)] (29%) and thereby demonstrates acetylene trimerisation on a metallaborane matrix.     

Etherification of n-butanol to di-n-butyl ether over H3PMo12 − xWxO40 (x = 0, 3, 6, 9, 12) Keggin and H6P2Mo18 − xWxO62 (x = 0, 3, 9, 15, 18) Wells–Dawson heteropolyacid catalysts

Etherification of n-butanol to di-n-butyl ether was carried out over H₃PMo_12 − xW_xO₄₀ (x = 0, 3, 6, 9, 12) Keggin and H₆P₂Mo_18 − xW_xO₆₂ (x = 0, 3, 9, 15, 18) Wells–Dawson heteropolyacid (HPA) catalysts. Acid strength of H₃PMo_12 − xW_xO₄₀ Keggin and H₆P₂Mo_18 − xW_xO₆₂ Wells–Dawson HPA catalysts was determined by NH₃-TPD (temperature-programmed desorption) measurements. The correlations between desorption peak temperature (acid strength) of the HPA catalysts and catalytic activity revealed that conversion of n-butanol and yield for di-n-butyl ether increased with increasing acid strength of the catalysts, regardless of the identity of HPA catalysts (without HPA structural sensitivity).     

Structural characterization and conformational analysis of (aqua)(ethylenediamine-N,N,N′-triacetato)chromium(III) monohydrate complex. Crystal structure of the cis-equatorial isomer of [Cr(ed3a)(H2O)] · H2O

The structure of the cis-equatorial isomer of [Cr(ed3a)(H₂O)] · H₂O (ed3a=ethylenediamine-N,N,N^′-triacetate ion) was determined by X-ray diffraction method. The complex crystallizes in the monoclinic space group P2₁/n, a=7.004(1) Å, b=15.958(2) Å, c=11.046(1) Å, β=97.16(1)°, and Z=4. Conformational analysis of the three possible geometrical isomers, trans(H₂O,N^′), trans(H₂O,N_H), and trans(H₂O,O) of [Cr(ed3a)(H₂O)] moiety, performed using the consistent force field (CFF) program with the recently developed parameters for EDTA-type complexes, yielded structural details and energies of the minimized form for each of the isomers. Calculated energies showed that the cis-eq isomer is the most stable one, with the geometry in a very good agreement with the crystallographic structure. Comparison of the molecular mechanics calculations with those for the analogous [Cr(ed3p)(H₂O)] · H₂O (ed3p=ethylenediamine-N,N,N^′-tripropionate ion) revealed some general patterns for the conformational preference of EDTA-type complexes.     

The formation of [RuCl(p-cymene)(Me2HPz)(PPh2OR)]Cl (Me2HPz=3, 5-dimethylpyrazole; R=H,Me and p-Tol) complexes from the cleavage of the P–N bond of a P-coordinated P(Me2Pz)Ph2 ligand by ROH molecules in a ruthenium(II) complex. Crystal structure of [RuCl(p-cymene)(Me2HPz)(PPh2OH)]Cl

The complex [RuCl₂(p-cymene)]₂ reacts with 1-(3,5-dimethyl)pyrazolyldiphenylphosphine (P(Me₂Pz)Ph₂) to give the complex RuCl₂(p-cymene)(P(Me₂Pz)Ph₂). This compound reacts with ROH molecules (R=H, Me and p-Tol) to give [RuCl(p-cymene)(Me₂HPz)(PPh₂OR)]Cl (R=H, Me and p-Tol) complexes, which contain both Me₂HPz and PPh₂OR coordinated molecules.     

Synthesis,crystal structure,and thermal stability of a novel 3D cadmium carboxyphosphonate containing left-hand helical chains Cd3Cl2[(O3PCH2–N(H)C5H9–COO)2(H2O)2] · 4H2O

A novel 3D cadmium carboxyphosphonate containing left-hand helical chains, Cd₃Cl₂[(O₃PCH₂–N(H)C₅H₉–COO)₂(H₂O)₂] · 4H₂O 1 has been synthesized by hydrothermal reaction at 120 °C and structurally characterized by single-crystal X-ray diffraction as well as with infrared spectroscopy, elemental analysis and thermogravimetric analysis. In compound 1, the hexanuclear clusters based on Cd(1)O₄Cl₂, Cd(2)O₄Cl₂, Cd(3)O₆ and CPO₃ polyhedra are interconnected through carboxyphosphonate ligands to form a 3D open-framework structure with channel system. The result of connections in this manner is the formation of 20- and 30-atom rings that are parallel to one another and run in the a-axis direction. It is interesting that a type of left-hand helical chain is formed by HL^2? ligands bridging Cd₃ ions running along the b-axis.     

Ca(BH4)2 as a simple tool for the preparation of thorium and uranium metallocene borohydride complexes: First synthesis and crystal structure of (C5Me5)2Th(η3-H3BH)2

Calcium borohydride allows for the high-yielding synthesis of (C₅Me₅)₂An(η³-H₃BH)₂ (An = Th, U) by reaction with (C₅Me₅)₂AnCl₂ (An = Th, U). While a preparative synthesis of (C₅Me₅)₂U(η³-H₃BH)₂ has been previously reported in the literature using K(C₅Me₅) and U(BH₄)₄, the use of Ca(BH₄)₂ is higher yielding and mild. Full characterization of the novel compound (C₅Me₅)₂Th(η³-H₃BH)₂ is presented.