慢走丝电火花线切割粗加工仿真系统的开发

为对电火花线切割加工机理有更深刻的认识,了解加工参数对加工精度的影响规律,介绍了一个电火花线切割加工粗加工的仿真系统。仿真系统通过对放电点的探索、工件的去除以及对线电极丝振动的分析,将实际的加工现象形象地再现于计算机上。为证实仿真系统的正确性,将仿真结果与试验结果进行了比较。在试验结果的获取中,为能够得到很难测量的线电极周围的放电间隙和工件形状数据,提出一种新的三维形状测量方法。通过对仿真结果和试验结果的比较,定性地证明了仿真方法的正确性。研究结果表明:改变线电极张力及伺服电压值时,从仿真过程得到的加工形状结果与试验得到的加工形状结果其倾向基本一致;加工缝端部的形状呈凸形还是呈凹形,取决于加工过程中放电爆发力和静电引力的相对大小。     

基于LabVIEW的电火花线切割放电加工状态的研究

电火花线切割加工时放电加工状态决定着加工的质量和速度,电极丝和工件之间的放电电压是对放电加工过程进行实时检测的重要参数.以LabVIEW为开发平台,以放电电压为检测参数,构建了电火花线切割放电加工状态识别仿真系统.该系统主要包括线切割放电状态识别模块、BP神经网络放电预测模块以及加工稳定性分析模块,对提高电火花线切割加工质量、加工效率及智能化加工有良好的效果.     

Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method

Wire electrical discharge machining (WEDM) is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in WEDM is treated as a challenging one because improvement of more than one machining performance measures viz. metal removal rate (MRR), surface finish (SF) and cutting width (kerf) are sought to obtain a precision work. Using Taguchi’s parameter design, significant machining parameters affecting the performance measures are identified as discharge current, pulse duration, pulse frequency, wire speed, wire tension, and dielectric flow. It has been observed that a combination of factors for optimization of each performance measure is different. In this study, the relationship between control factors and responses like MRR, SF and kerf are established by means of nonlinear regression analysis, resulting in a valid mathematical model. Finally, genetic algorithm, a popular evolutionary approach, is employed to optimize the wire electrical discharge machining process with multiple objectives. The study demonstrates that the WEDM process parameters can be adjusted to achieve better metal removal rate, surface finish and cutting width simultaneously.     

快走丝电火花线切割加工仿真系统

通过神经网络技术建立了快走丝电火花线切割加工工艺模型 ,利用穷举法建立了具有一定人工智能的工艺参数全局优化系统 ,开发了模具电火花加工过程仿真系统。该系统不仅可以精确预测加工效果 ,而且克服了工艺参数表的局限性 ,弥补了建立在工艺参数表基础上的参数自动选取系统的缺陷 ,实现了工艺参数全局最优化。测试结果及实际使用结果表明本文所建立的仿真系统反映了机床的加工工艺特性 ,预测误差基本控制在 8%内 ,系统的参数优化选取功能使机床的加工性能得以充分发挥。仿真系统具有广泛的通用性 ,可适用于不同类型的线切割加工机床。     

Development of surface roughness optimisation and prediction for the process of wire electro-discharge grinding

This paper investigates the technological capabilities of a hybrid micro machining process for performing wire electro-discharge grinding (WEDG). In particular, micro wire electrical discharge machining (μWEDM) is employed in combination with a rotating submergible spindle to perform WEDG. In this research, first a machining strategy for workpiece preparation is presented. Then, the effects of different machining setup parameters on the achievable surface finish after WEDG are investigated. In particular, an experimental study was conducted to identify the most statistically significant setup parameters for performing the main cut that affect the resulting surface quality. A signal-to-noise (S/N) ratio analysis was conducted to optimise the technological parameters for performing WEDG. By modifying the discharge energy for main cuts when performing WEDG surface finish comparable to that of μWEDM can be achieved. In addition, a simple and cost-effective method for on-the-machine estimation of resulting surface roughness is proposed. Especially, by applying inductive learning a surface roughness prediction model for WEDG can be generate based on data acquired by monitoring on-line the process.     

Using wire electrical discharge machining for improved corner cutting accuracy of thin parts

The wire electrical discharge machining process (WEDM) allows one to achieved ruled surfaces along intricate contours in hard materials. When one intends to use such a machining process, one has to analyze both the magnitudes of the corners’ radii and the corner’s angles that are formed between adjoining surfaces. Some experimental research work carried out unveiled the systematic occurrence of machining errors when WEDM is used to obtain outside sharp corners, especially in small thickness workpieces. A permanent bending at the crest of sharp corners, which leads to a substantial deviation from the prescribed geometrical shape, was found. The deviation form depends on the magnetic properties of the workpiece material. The research was focused on establishing a means for characterizing this shape error. Moreover, the influence exerted by certain factors, such as the corner angle and the thickness of the workpiece on the above-mentioned machining error was quantified.     

Research on cutting temperature of work-piece in milling process based on WPSO

Wire electrical discharge machining (WEDM) is a commonly used process in manufacturing industries to machine electrically conductive materials with complex shapes and varying hardness. The performance of any machining process is based on right selection of input variables. The selection of optimal parameters in WEDM is a difficult task as it is a highly stochastic process in nature. The present work deals with the development of empirical relationships for the output responses of kerf (cutting width) and wire wear ratio considering pulse-on time, pulse-off time, wire tension, dielectric flow rate, and wire feed as the input variables. Response surface methodology is used to find the quantitative relations. Subsequently, the developed mathematical models are used for optimization. A recently developed global optimization technique, harmony search algorithm, is applied to find the optimal set of input control variables.     

Modeling and multiresponse optimization on WEDM for HSLA by RSM

Wire electric discharge machining (WEDM) is a nonconventional machining method to cut hard and conductive material with the help of a moving electrode. High-strength low-alloy steel (HSLA) is a hard alloy with high hardness and wear-resisting property. The purpose of this study is to investigate the effect of parameters on cutting speed and dimensional deviation for WEDM using HSLA as workpiece. It is seen that the most prominent factor for cutting speed and dimensional deviation is pulse-on time, while two-factor interactions play an important role in this analysis. Response surface methodology was used to optimize the process parameter for cutting speed and dimensional deviation. The central composite rotatable design was used to conduct the experiments. The analysis of variance was used for the investigation of significant factors.     

Determining cutting parameters in wire EDM based on workpiece surface temperature distribution

The material removal process in wire electrical discharge machining (WEDM) may result in work-piece surface damage due to the material thermal properties and the cutting parameters such as varying on-time pulses, open circuit voltage, machine cutting speed, and dielectric fluid pressure. A finite element method (FEM) program was developed to model temperature distribution in the workpiece under the conditions of different cutting parameters. The thermal parameters of low carbon steel (AISI4340) were selected to conduct this simulation. The thickness of the temperature affected layers for different cutting parameters was computed based on a critical temperature value. Through minimizing the thickness of the temperature affected layers and satisfying a certain cutting speed, a set of the cutting process parameters were determined for workpiece manufacture. On the other hand, the experimental investigation of the effects of cutting parameters on the thickness of the AISI4340 workpiece surface layers in WEDM was used to validate the simulation results. This study is helpful for developing advanced control strategies to enhance the complex contouring capabilities and machining rate while avoiding harmful surface damage.     

Improving the surface quality in wire electrical discharge machined specimens by removing the recast layer using magnetic abrasive finishing method

This study explores the feasibility of removing the recast layer formed on aluminum alloy cylindrical specimens machined by wire electrical discharge machining (WEDM) by using magnetic abrasive finishing (MAF). The WEDM is a thermal machining process capable of accurately machining parts with high hardness or complex shapes. The sparks produced during the WEDM process melt the metal’s surface. The molten material undergoes ultra-rapid quenching and forms a layer on the surface defined as recast layer. The recast layer may be full of craters and microcracks which reduce service life of materials tremendously, especially under fatigue loads in corrosive environments. This investigation demonstrates that MAF process, can improve the quality of WEDM machined surfaces effectively by removing the recast layer. The present work studies the effect of some parameters, i.e., linear speed, working gap, abrasive particle size, and finishing time on surface roughness and recast layer thickness using full factorial analysis. Three-level full factorial technique is used as design of experiments for studying the selected factors. In order to indicate the significant factors, the analysis of variance has been used. In addition, an equation based on regression analysis is presented to indicate the relationship between surface roughness and recast layer thickness of cylindrical specimens and finishing parameters. Experimental results show the influence of MAF process on recast layer removal and surface roughness improvement.     

Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites

Aluminium metal matrix composites (MMCs) reinforced with silicon carbide particulate (SiCp) find several applications due to their improved mechanical properties over the conventional metals for a wide variety of aerospace and automotive applications. However, the presence of discontinuously distributed hard ceramic in the MMCs made them as difficult-to-cut materials for conventional machining methods. The wire electrical discharge machining (WEDM), as a widely adopted non-traditional machining method for difficult-to-cut precision components, found an appropriate metal removal process for MMCs to enhance quality of cut within the stipulated cost. While machining the advanced materials like MMCs, a clear understanding into the machining performance of the process for its control variables could make the process uncomplicated and economical. In light of the growing industrial need of making high performance-low cost components, the investigation aimed to explore the machining performance characteristics of SiCp reinforced Al7075 matrix composites (Al7075/SiCp) during WEDM. While conducting the machining experiments, surface roughness, metal removal rate, and wire wear ratio are considered the responses to evaluate the WEDM performance. Response surface methodology is used to develop the empirical models for these WEDM responses. SiC particulate size and volume percentages are considered the process variables along with pulse-on time, pulse-off time, and wire tension. Analysis of variance (ANOVA) is used to check the adequacy of the developed models. Since the machining responses are conflicting in nature, the problem is formulated as a multi-objective optimization problem and is solved using the Non-dominated Sorting Genetic Algorithm-II to obtain the set of Pareto-optimal solutions. The derived optimal process responses are confirmed by the experimental validation tests, and the results are analyzed by SEM.     

Optimization of multi machining characteristics in WEDM of WC-5.3%Co composite using integrated approach of Taguchi,GRA and entropy method

Wire electrical discharge machining (WEDM) is a well known process for generating intricate and complex geometries in hard metal alloys and metal matrix composites with high precision. In present work, intricate machining of WC-5.3%Co composite on WEDM has been reported. Taguchi’s design of experiment has been utilised to investigate the process parameters for four machining characteristics namely material removal rate, surface roughness, angular error and radial overcut. In order to optimize the four machining characteristics simultaneously, grey relational analysis (GRA) coupled with entropy measurement method has been employed. Through GRA, grey relational grade has been computed as a performance index for predicting the optimal parameters setting for multi machining characteristics. Using Analysis of Variance (ANOVA) on grey relational grade, significant parameters affecting the multi-machining characteristics has been determined. Confirmatory results prove the potential of present approach.     

Self-tuning fuzzy control with a grey prediction for wire rupture prevention in WEDM

Wire rupture in the wire electrical discharge machining (WEDM) process is one of the most troublesome problems in practical applications. In this paper, the abnormal ratio R_ab, defined as the proportion of abnormal sparks in a sampling period, is taken to represent the gap state in machining. The grey predictor is adopted to compensate the time-delayed R_ab caused by the low pass filter data processing. A gain self-tuning fuzzy control system has been developed to cope with the conditions that often occur with wire rupture in the WEDM process, such as an improper setting of machining parameters, machining the workpiece with varying thickness, etc. Experimental results of several cases show that the proposed controller results in a satisfactory performance. Not only can it immediately suppress transient situation once there is a sudden change of workpiece thickness, but a stable performance can also be achieved during machining a workpiece of constant thickness. As a result, wire rupture problems in most WEDM processes can be successively solved by the proposed control strategy.     

Surface integrity study of WEDM with various wire electrodes: experiments and analysis

Abstract

Wire electrical discharge machining (WEDM) is always significant for its high-precision machining. However, due to the generation of high discharge energy during machining, machined surfaces are often got distorted. These might be upgraded by choosing the correct tool with proper machining condition. The effects of the electrode materials and process parameters on different responses of WEDM like average surface roughness, recast layer thickness, and surface morphology are systematically examined here to enhance the knowledge of WEDM and its correlation with electrode property. The experiments have been carried out on one of the expensive steel namely Maraging steel 300 due to its applicability in tooling and aerospace industries. Plain brass wire, zinc-coated brass wire (ZCB), and silver-coated brass (SCB) wires are used as a tool electrode for analysis. Comparative experimental studies prove that among BW, ZCB, and SCB, the overall performance of SCB is commendable owing to the high-quality surface considering control parameters in low discharge energy level. However, the second-best performance is shown by ZCB.     

The Effect of Cutting Parameters on Workpiece Surface Roughness in Wire EDM

In this study, the variation of workpiece surface roughness with varying pulse duration, open circuit voltage, wire speed and dielectric fluid pressure was experimentally investigated in Wire Electrical Discharge Machining (WEDM). Brass wire with 0.25 mm diameter and SAE 4140 steel with 10 mm thickness were used as tool and workpiece materials in the experiments, respectively. It is found experimentally that the increasing pulse duration, open circuit voltage and wire speed, increase the surface roughness whereas the increasing dielectric fluid pressure decreases the surface roughness. The variation of workpiece surface roughness with machining parameters is modelled by using a power function. The level of importance of the machining parameters on the workpiece surface roughness is determined by using analysis of variance (ANOVA).     

Application of non-dominated sorting genetic algorithm for multi-objective optimization of electrical discharge diamond face grinding process

Hybrid machining processes (HMPs), having potential for machining of difficult to machine materials but the complexity and high manufacturing cost, always need to optimize the process parameters. Our objective was to optimize the process parameters of electrical discharge diamond face grinding (EDDFG), considering the simultaneous effect of wheel speed, pulse current, pulse on-time and duty factor on material removal rate (MRR) and average surface roughness (Ra). The experiments were performed on a high speed steel (HSS) workpiece at a self developed face grinding setup on an EDM machine. All the experimental results were used to develop the mathematical model using response surface methodology (RSM). The developed model was used to generate the initial population for a genetic algorithm (GA) during optimization, non-dominated sorting genetic algorithm (NSGA-II) was used to optimize the process parameters of EDDFG process. Finally, optimal solutions obtained from pareto front are presented and compared with experimental data.     

复合运丝型电火花线切割加工参数分析与研究

提出了一种新型电火花线切割机床,即电极丝作往复直线运动的同时还绕自身轴线高速旋转的复合运丝型线切割机床。介绍了该类机床与其他线切割机床加工的基本工艺指标。通过与高速走丝电火花线切割机床比较实验,分析了脉冲宽度、脉冲间隔、脉冲峰值电流等电参数对加工工艺指标的影响,实验表明这种独特的复合运丝方式在降低表面粗糙度、提高加工精度等方面较传统运丝方式具有较大的优越性,且机床结构较为简单,对于各种工艺参数和电参数具有更加广泛的适用性,具有进一步研究和推广价值。     

Determination of material removal rate in wire electro-discharge machining of metal matrix composites using dimensional analysis

Wire electro-discharge machining (WEDM) is a vital process in manufacturing intricate shapes. The present work proposes a semi-empirical model for material removal rate in WEDM based on thermo-physical properties of the work piece and machining parameters such as pulse on-time and average gap voltage. The model is developed by using dimensional analysis and non-linear estimation technique such as quasi-Newton and simplex. Predictability of the proposed model is more than 99% for all work materials studied. The work materials were silicon carbide particulate reinforced aluminium matrix composites. The experiments and model prediction show significant role of coefficient of thermal expansion in WEDM of these materials. In addition, an empirical model, based on response surface method, has also been developed. The comparison of these models shows significant agreement in the predictions.     

PARAMETRIC INFLUENCE AND OPTIMIZATION OF WIRE EDM OF HOT DIE STEEL

Wire-cut Electro Discharge Machining (WEDM) is a special form of conventional EDM process in which the electrode is a continuously moving conductive wire. The present study aims at determining parametric influence and optimum process parameters of Wire-EDM using Taguchi's technique and a Genetic algorithm. The variation of the performance parameters with machining parameters was mathematically modeled by Regression analysis method. The objective functions are defined as Dimensional Error (DE), Surface Roughness (SR) and Volumetric Material Removal Rate (VMRR). Experiments were designed as per Taguchi's L₁₆ Orthogonal Array (OA) wherein Pulse-on duration, Current, Pulse-off duration, Bed-speed and Flushing rate have been considered as the important input parameters. The matrix experiments were conducted for the material Hot Die Steel (HDS) having the thickness of 40 mm. The Heat Affected Zone (HAZ) characteristics of the eroded materials were assessed by Scanning Electron Microscope (SEM) and the microhardness of the material was tested using Vickers microhardness tester. The results of the study reveal that among the machining parameters, it is preferable to go for smaller pulse-off duration for achieving overall good performance. Regarding pulse-on duration, higher values are recommended for error constrained machining with higher MRR and constrained/limited values for attaining good surface texture. Smaller current is suggested for better surface finish/texture control, medium range for error control and high value for MRR. Finally, the validation exercise was performed with the optimum levels of the process parameters. The results confirm the efficiency of the approach employed for optimization of process parameters in this study.     

Influence of machining parameters on surface roughness in finish cut of WEDM

Surface roughness is significant to the finish cut of wire electrical discharge machining (WEDM). This paper describes the influence of the machining parameters (including pulse duration, discharge current, sustained pulse time, pulse interval time, polarity effect, material and dielectric) on surface roughness in the finish cut of WEDM. Experiments proved that the surface roughness can be improved by decreasing both pulse duration and discharge current. When the pulse energy per discharge is constant, short pulses and long pulses will result in the same surface roughness but dissimilar surface morphology and different material removal rates. The removal rate when a short pulse duration is used is much higher than when the pulse duration is long. Moreover, from the single discharge experiments, we found that a long pulse duration combined with a low peak value could not produce craters on the workpiece surface any more when the pulse energy was reduced to a certain value. However, the condition of short pulse duration with high peak value still could produce clear craters on the workpiece surface. This indicates that a short pulse duration combined with a high peak value can generate better surface roughness, which cannot be achieved with long pulses. In the study, it was also found that reversed polarity machining with the appropriate pulse energy can improve the machined surface roughness somewhat better compared with normal polarity in finish machining, but some copper from the wire electrode is accreted on the machined surface.