Subsolidus Phase Relations in the Ga2O3-In2O3-SnO2 System

Subsolidus phase relationships in the Ga₂O₃–In₂O₃–SnO₂ system were studied by X-ray diffraction over the temperature range 1250–1400°C. At 1250°C, several phases are stable in the ternary system, including Ga₂O₃( ss ), In₂O₃( ss ), SnO₂, Ga_{3− x} In_{5+ x} Sn₂O₁₆, and several intergrowth phases that can be expressed as Ga_{4−4 x} In_{4 x} Sn _{n −4}O_{2 n −2} where n is an integer. An In₂O₃–SnO₂ phase and Ga₄SnO₈ form at 1375°C but are not stable at 1250°C. GaInO₃ did not form over the temperature range 1000–1400°C.     

Influence of Additives on Slag Resistance of Al2O3-SiO2-SiC-C Refractory Bond Phases under Reducing Atmosphere

The microstructures of Al₂O₃–SiO₂–SiC–C refractory matrices with aluminum, silicon, Si₃N₄, BN, B₂O₃, and B₄C additives are characterized before and after a crucible slag test, and the phases present are compared to those expected at thermodynamic equilibrium. The carbon content dominates the resistance to CaO–MgO–Al₂O₃–SiO₂ slag penetration, while the viscosity of liquid phases present has a significant influence when the matrix carbon contents are similar. Silicon and Si₃N₄ additives reduce slag penetration resistance because of indirect oxidation of carbon to form SiC. B₄C, in particular, and B₂O₃ also reduce slag penetration resistance because of formation of a more fluid boron-containing liquid, while aluminum and BN addition have no significant effect. Carbon and BN hardly react with the slag, while SiC partially reacts with it, leading to deposition of carbon as a dense layer. Corundum present in the refractories also readily dissolves in the slag. Microstructurally, slag penetration resistance is associated with the dense carbon layer located at the slag-refractory interface.     

Microstructure and Properties of Co2+: ZnAl2O4/SiO2 Nanocomposite Glasses Prepared by Sol–Gel Method

Transparent bulk Co²⁺: ZnAl₂O₄/SiO₂ nanocomposites containing nanocrystalline Co²⁺: ZnAl₂O₄ dispersed in silica glass matrix were obtained by the sol–gel method. The gels of composition 89SiO₂–6Al₂O₃–5ZnO− x CoO ( x =0.2, 0.4, 0.6, 0.8, 1.0) (mol%) were prepared at room temperature by using two different aluminum salts, aluminum nitrate and aluminum alkoxide (aluminum-iso-propoxide, Al(OPrⁱ)₃), as starting materials. The transparent gels were converted to the crystalline phase of gahnite by heating above 900°C. The microstructural evolution of gels was characterized. The effect of Co²⁺ concentration on spectroscopic properties was also discussed. Co²⁺: ZnAl₂O₄ nanocrystals dispersed in the SiO₂-based glass are formed at lower heat-treatment temperature and shorter heating time by using Al(OPrⁱ)₃ as raw material.     

The System KAlSiO4–Mg2SiO4–KAlSi2O6

Schairer's study (1954) on phase relations in the system KalSi₂O₆–Mg₂SiO₄–SiO₂ was extended to include the system KalSiO₄–Mg₂SiO₄–KalSi₂O₆. It is shown that this join is ternary; however, the relatively high vapor pressure of the condensed phases prohibits study by the usual quenching techniques. The apparent intersection of the (KalSiO₄–Mg₂SiO₄–SiO₃) join with the primary phase volume of spinel is attributed to loss of the alkali-silicate constituents by vapor transport. This results in the effective bulk composition being moved away from this join toward the primary phase volume of spinel in the system K₂O–MgO–Al₂O₃–SiO₂.     

Effect of Sb2O3 on Thermal Properties of Glasses in Bi2O3–B2O3–SiO2 System

Glasses with compositions 50Bi₂O₃– x Sb₂O₃–10B₂O₃–(40– x ) SiO₂ ( x =0, 1, 3, 5, 8, 10) have been prepared by conventional melt quench technique. Substitution of Sb₂O₃ for SiO₂ exerted an obvious effect on properties of glasses, especially, increased glass transition temperature ( T _g) and crystalline temperature ( T _c) greatly. Results of infrared transmission spectra attributed the effect to the formation of new bridging bonds of Sb–O–B and Sb–O–Si in glass network.     

Cassiterite Solubility in High-Silica K2O-Al2O3-SiO2 Liquids

The saturation surface of cassiterite, SnO₂, was determined for liquids in the system K₂O–Al₂O₃–SiO₂ as a function of bulk composition and temperature. At fixed K₂O/Al₂O₃ cassiterite solubility varies weakly with SiO₂ concentration (76 to 84 mol%), temperature (1350° to 1550°C), and log ( f _O2) (−0.7 to −5.3). Cassiterite solubility is also approximately independent of composition in liquids with molar ratios of K₂O/Al₂O₃ lessthan equal to 1 (peraluminous liquids). As K₂O/Al₂O₃ increases from 1 (peralkaline liquids), however, cassiterite solubility increases steeply and approximately linearly with K₂O in excess of Al₂O₃. It is proposed that potassium in excess of aluminum combines with Sn⁴⁺ to form quasi-molecular complexes with an effective stoichiometry of K₄SnO₄.     

Phase Relations and Lattice Constants in the MgO-Al2O3-Ga2O3 System at 1550°C

Phase relations and lattice constants in the MgO–Al₂O₃–Ga₂O₃ system at 1550°C have been determined experimentally. In a large part of this system, only a nonstoichiometric spinel is stable. Compositions as extreme as 12.5 mol% MgO–20.5 mol% Ga₂O₃–67 mol% Al₂O₃ for a homogeneous spinel are possible. In the bordering phase diagrams of MgO–Al₂O₃ and MgO–Ga₂O₃, the composition of the spinel is as high as 63 mol% Al₂O₃ or Ga₂O₃, respectively. The contributions of all simple ionic exchange reactions on the lattice constant of the spinel have been deduced from X-ray diffractometry data.     

Quaternary System Al2O3–CaO–MgO–SiO2: II Study of the Crystallization Volume of MgAl2O4

Solid-state compatibility and melting relations of MgAl₂O₄ in the quaternary system Al₂O₃–CaO–MgO–SiO₂ were studied by firing and quenching selected samples located in the 65 wt% MgAl₂O₄, plane followed by microstructural and energy dispersive X-ray analysis. A projection of the liquidus surface of the primary crystallization volume of MgAl₂O₄ was constructed from CaO, SiO₂ and exceeding Al₂O₃, not involved in stoichiometric MgAl₂O₄ formation; those three amounts were recalculated to 100 wt%. The temperature and character of six invariant points, where four solids co-exist with a liquid phase, were defined. One maximum point was localized and the positions of the isotherms were tentatively established. The effect of CaO, SiO₂, and Al₂O₃ impurities on the high temperature behavior of spinel materials was also discussed.     

Sintering and Microwave Dielectric Properties of the LiNb0.63Ti0.4625O3 Ceramics with the B2O3–SiO2 Liquid-Phase Additives

The effect of B₂O₃–SiO₂ liquid-phase additives on the sintering, microstructure, and microwave dielectric properties of LiNb_0.63Ti_0.4625O₃ ceramics was investigated. It was found that the sintering temperature could be lowered easily, and the densification and dielectric properties of LiNb_0.63Ti_0.4625O₃ ceramics could be greatly improved by adding a small amount of B₂O₃–SiO₂ solution additives. No secondary phase was observed for the ceramics with B₂O₃–SiO₂ additives. With the addition of 0.10 wt% B₂O₃–SiO₂, the ceramics sintered at 900°C showed favorable microwave dielectric properties with ɛ_r=71.7, Q × f =4950 GHz, and τ_f=−2.1 ppm/°C. The energy dispersive spectra analysis showed an excellent co-firing interfacial behavior between the LiNb_0.63Ti_0.4625O₃ ceramic and the Ag electrode. It indicated that LiNb_0.63Ti_0.4625O₃ ceramics with B₂O₃–SiO₂ solution additives have a number of potential applications on passive integrated devices based on the low-temperature co-fired ceramics technology.     

Subsolidus Phase Relationships in the Ga2O3–Al2O3–TiO2 System

Subsolidus phase relationships in the Ga₂O₃–Al₂O₃–TiO₂ system at 1400°C were studied using X-ray diffraction. Phases present in the pseudoternary system include TiO₂ (rutile), Ga_{2−2 x} Al_{2 x} O₃ ( x ≤0.78 β-gallia structure), Al_{2−2 y} Ga_{2 y} O₃ ( y ≤0.12 corundum structure), Ga_{2−2 x} Al_{2 x} TiO₅ (0≤ x ≤1 pseudobrookite structure), and several β-gallia rutile intergrowths that can be expressed as Ga_{4−4 x} Al_{4 x} Ti _{n −4}O_{2 n −2} ( x ≤0.3, 15≤ n ≤33). This study showed no evidence to confirm that aluminum substitution of gallium stabilizes the n =7 β-gallia–rutile intergrowth as has been mentioned in previous work.     

Phase Equilibrium Relationships at Liquidus Temperatures in the System FeO–Fe2O3–Al2O3–SiO2

Phase equilibrium data at liquidus temperatures are presented for mixtures in the system FeO–Fe₂O₃–Al₂O₃–SiO₂. The volume located between the 1 and 0.2 atm. O₂ isobaric surfaces of the tetrahedron representing this system was studied in detail. Scattered data were obtained at lower O₂ pressures. Results obtained in the present investigation were combined with data in the literature to construct a phase equilibrium diagram, at liquidus temperatures, for the entire system FeO–Fe₂O₃–Al 2 O₃–SiO₂. Methods for interpretation of the diagram are explained.     

Quaternary System Al2O3–CaO–MgO–SiO2: I, Study of the Crystallization Volume of Al2O3

Compatibility relations of Al₂O₃ in the quaternary system Al₂O₃–CaO–MgO–SiO₂ were studied by firing and quenching followed by microstructural and energy-dispersive X-ray examination. A projection of the liquidus surface of the primary phase volume of Al₂O₃ was constructed in terms of the CaO, SiO₂, and MgO contents of the mixtures recalculated to 100 wt%. Two invariant points, where four solids coexist with a liquid phase, were defined, and the positions of the isotherms were tentatively established. The effect of SiO₂, MgO, and CaO impurities on Al₂O₃ growth also was studied.     

Proton Conductivity in Zr4+-Ion-Doped P2O5–SiO2 Porous Glasses

The effect of zirconium ions on glass structure and proton conductivity was investigated for sol-gel-derived P₂O₅–SiO₂ glasses. Porous glasses were prepared through hydrolysis of PO(OCH₃)₃, Zr(OC₄H₉)₄, and Si(OC₂H₅)₄. Chemical bonding of the P⁵⁺ ions was characterized using ³¹P-NMR spectra. The phosphorous ions, occurring as PO(OH)₃ in the ZrO₂-free glass, were polymerized with one or two bridging oxygen ions per PO₄ unit with increased ZrO₂ content. The chemical stability of these glasses was increased significantly on the addition of ZrO₂, but the conductivity gradually decreased from 26 to 12 mS/cm at room temperature for 10P₂O₅·7ZrO₂·83SiO₂ glass. A fuel cell was constructed using 10P₂O₅·5ZrO₂·85SiO₂ glass as the electrolyte; a power of ∼4.5 mW/cm² was attained.     

Phase Relationships in the Si3N4–SiO2–Lu2O3 System

Phase relationships in the Si₃N₄–SiO₂–Lu₂O₃ system were investigated at 1850°C in 1 MPa N₂. Only J-phase, Lu₄Si₂O₇N₂ (monoclinic, space group P 2₁/ c , a = 0.74235(8) nm, b = 1.02649(10) nm, c = 1.06595(12) nm, and β= 109.793(6)°) exists as a lutetium silicon oxynitride phase in the Si₃N₄–SiO₂–Lu₂O₃ system. The Si₃N₄/Lu₂O₃ ratio is 1, corresponding to the M-phase composition, resulted in a mixture of Lu–J-phase, β-Si₃N₄, and a new phase of Lu₃Si₅ON₉, having orthorhombic symmetry, space group Pbcm (No. 57), with a = 0.49361(5) nm, b = 1.60622(16) nm, and c = 1.05143(11) nm. The new phase is best represented in the new Si₃N₄–LuN–Lu₂O₃ system. The phase diagram suggests that Lu₄Si₂O₇N₂ is an excellent grain-boundary phase of silicon nitride ceramics for high-temperature applications.     

Properties of Sm2O3─Al2O3─SiO2 Glasses for In Vivo Applications

The compositional range for glass formation below 1600°C in the Sm₂O₃─Al₂O₃─SiO₂ system is (9–25)Sm₂O₃─(10–35)Al₂O₃─(40–75)SiO₂ (mol%). Selected properties of the Sm₂O₃─Al₂O₃─SiO₂ (SmAS) glasses were evaluated as a function of composition. The density, refractive index, microhardness, and thermal expansion coefficient increased as the Sm₂O₃ content increased from 9 to 25 mol%, the values exceeding those for fused silica. The dissolution rate in 1 N HCl and in deionized water increased with increasing Sm₂O₃ content and with increasing temperature to 70°C. The transformation temperature ( T _g ) and dilatometric softening temperature ( T _d ) of the SmAS glasses exceeded 800° and 850°C, respectively.     

Phase Equilibria in the Ga2O3In2O3 System

Subsolidus phase relationships in the Ga₂O₃–In₂O₃ system were studied by X-ray diffraction and electron probe microanalysis (EPMA) for the temperature range of 800°–1400°C. The solubility limit of In₂O₃ in the β-gallia structure decreases with increasing temperature from 44.1 ± 0.5 mol% at 1000°C to 41.4 ± 0.5 mol% at 1400°C. The solubility limit of Ga₂O₃ in cubic In₂O₃ increases with temperature from 4.X ± 0.5 mol% at 1000°C to 10.0 ± 0.5 mol% at 1400°C. The previously reported transparent conducting oxide phase in the Ga-In-O system cannot be GaInO₃, which is not stable, but is likely the In-doped β-Ga₂O₃ solid solution.     

Optical Properties of Er-Doped Al2O3–SiO2 Films Prepared by a Modified Sol–Gel Process

Er-doped Al₂O₃–SiO₂ (1/9 in mol ratio of Al₂O₃/SiO₂) thin films were prepared by using a modified sol–gel process. The modified process entails the precipitation and digestion of Er(OH)₃, obtained from the reaction between Er ions and NH₄OH in solution. Thin films were deposited on Si wafers by using a spin coating technique (3000 rpm) and the coated films were heat treated at different temperatures for 1 h in an oxygen-purged furnace. All the films were structurally characterized by the X-ray diffraction technique using Cu K α radiation. Refractive indices and the morphologies of the films were studied using a spectroscopic phase modulated ellipsometer and atomic force microscopy, respectively. It was observed that the films were crack free and of about 0.4 μm thickness in a single spin coating and both the lifetime and the photoluminescence intensity of Er ions increased with increasing the annealing temperature. The luminescence properties of the Er-doped Al₂O₃–SiO₂ made by a conventional and our modified doping process were compared and discussed from the stand point of peak intensities and lifetimes as a function of annealing temperatures. It is to be noted here that our modified process was found to be more effective in reducing the clustering of Er ions in Al₂O₃–SiO₂ materials as compared to that of the conventional method.     

Thermal Expansions and Chemical Durabilities of Yttria–Aluminosilicate Glasses Containing Na2O and ZrO2

Properties of glasses in the system Y₂O₃–Al₂O₃–SiO₂ containing Na₂O and ZrO₂ were investigated. The difference between the thermal expansion coefficients (Δα) at temperatures above T _g and those below T _g, microhardness, density, and chemical durability were measured in relation to the Al₂O₃/Y₂O₃ molar ratio. These glasses were found to have a smaller value of Δα than that of a commercial coating glass.     

Energetics of La2O3–HfO2–SiO2 Glasses

A series of La₂O₃–HfO₂–SiO₂ glasses, approximately along the join 0.73SiO₂–0.27( x HfO₂–(1− x )La₂O₃), 0< x <0.3), was prepared using containerless processing techniques (aerodynamic levitation combined with laser heating in oxygen). The enthalpy of formation and enthalpy of vitrification at 25°C were obtained from drop solution calorimetry of these glasses and appropriate crystalline compounds in a molten lead borate (2PbO–B₂O₃) solvent at 702°C. The enthalpy of formation from crystalline oxides was exothermic and became less exothermic with increasing HfO₂ content. Heat contents were measured by transposed temperature drop calorimetry and depended linearly on the HfO₂ content. Differential scanning calorimetry showed that both the onset glass transition and the onset crystallization temperature of these glasses increased with increasing HfO₂ content. Upon slow cooling in air, the glasses crystallized to a mixture of baddeleyite, cristobalite, lanthanum disilicate, and hafnon.     

Revised Phase Diagram for the System Al2O3—SiO2

On the basis of 190 runs made up to 1860°C in sealed noble-metal containers the following revisions have been made in the equilibrium diagram for the system A1₂O₃–SiO₂. Mullite melts congruently at 1850°C. The extent of equilibrium solid solution in mullite at solidus temperature is from approximately 60 mole % Al₂O₃ (3/2 ratio) to 63 mole % A1₂O₃. Metastable solid solutions can be prepared up to about 67 mole % Al₂O₃. There is no evidence for stable solubility of excess SiO₂ beyond the 3/2 composition at pressures below 3 kbars. Refractive indices are presented for glasses containing up to 60 mole % Al₂O₃ and from them the composition of the eutectic is confirmed at 5 mole % SiO₂. The variation in lattice constants of the mullite solid solution is not an unequivocal guide to composition since mullites at one composition produced at different temperatures show differences in spacing, no doubt reflecting Al-Si ordering phenomena. The possibility of quartz and corundum being the stable assemblage at some low temperatures and pressures cannot be ruled out. A new anhydrous phase in the system is described, which was previously thought to be synthetic andalusite; it is probably a new polymorph of the Al₂SiO₅ composition with ortho-rhombic unit-cell dimensions a =7.55 A, b =8.27 A, and c = 5.66 A.