Impact of vanadium-, sulfur-, and dysprosium-doped zinc oxide nanoparticles on various properties of PVDF/functionalized-PMMA blend nanocomposites: Structural,optical, and morphological studies

The polymeric blend was fabricated with crystalline poly(vinylidene fluoride) (PVDF)/amorphous functionalized-poly(methyl methacrylate) (PMMA) in 70/30 w/w ratio by chemical mixing method. Functionalization of PMMA was achieved with 2-amino-5-nitrobenzoic acid. The prepared polymer blend was used as a matrix to synthesize nanocomposites with undoped/doped zinc oxide (ZnO) nanoparticles. Doping in ZnO was achieved with vanadium, sulfur, and dysprosium elements as a dopant. The structural, optical, electronic, and morphological properties of undoped/doped nanosized ZnO and blended nanocomposites were accessed through sophisticated analytical techniques, that is, Fourier transform infrared (FTIR), ultraviolet–visible (UV–vis), UV–vis–diffuse reflectance spectra, nuclear magnetic resonance, fluorescence spectroscopy, X-ray diffraction (XRD), transmission electron microscopy, and scanning electron microscopy. The FTIR band at 1165–1176 cm⁻¹ in functionalized-PMMA indicate the formation of aliphatic C-N bond along with aromatic ¹H chemical shift (δ) at 7.134, 7.829 and 8.210 ppm confirm the successfully functionalization of PMMA. The prominent XRD peak at 2θ = 20.8° in nanocomposites shown improvement in β-phase of PVDF. The results show that Dy doped ZnO nanoparticles create remarkable effect on various properties of nanocomposites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47116.     

Compatibilised LDPE/LLDPE/nanoclay nanocomposites: I. Structural,mechanical, and thermal properties

Nanocomposites of LDPE/LLDPE/nanoclay have been prepared using a lab‐scale co‐rotating twin screw extruder. Using XRD, tensile testing, AFM, TGA, effects of some material properties and one processing parameter on mechanical and thermal properties of the prepared nanocomposites were evaluated. Tensile properties indicated that all the prepared nanocomposites exhibited a significant improvement in elastic modulus and toughness compared to pristine LDPE/LLDPE blends of the same composition. Thermal stability of nanocomposites in the air and nitrogen atmosphere was improved. XRD patterns and AFM micrographs showed semi‐exfoliated and intercalated microstructures for the prepared nanocomposites with different orders of mixing.     

PAN based quasi carbon whiskers reinforced PI polyblends: Microhardness,mechanical, hydraulic,and morphological study

Polyimide (PI)/Polyacrylonitrile (PAN) polyblend films were prepared using solution cast technique by spin coating unit. PAN was incorporated within the PI matrix in different concentration i.e. 10^?3, 10^?2, 10^?1, and 1 wt% to prepare polyblend films. The PI polyblend film incorporated with 10^?1 wt% PAN and cured at 330°C produces well defined quasi carbon whiskers within the PI matrix. Evidence of the orientation of these carbon whiskers was indicated by optical microscopy and AFM. The improved microhardness, mechanical performance, and hydraulic resistivity of 10^?1 wt% PI/PAN polyblend film was observed and attributed to the orientation of these partially carbonized whiskers within PI matrix. The overall property decreases with increasing the concentration of PAN over 10^?1 wt%. The incorporation of ultra low concentration of PAN within the PI provides means of achieving excellent combination of microhardness, mechanical, and hydraulic resistance with improved morphology. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

PVDF/ZnO composite films for photocatalysis: A comparative study of solution mixing and melt blending methods

Heterogeneous photocatalysis represents a solution for several environmental problems. However, achieving photocatalyst separation from reaction media on a large scale remains a challenge, one that might be overcome by the immobilization of photocatalysts into supports. To this end, composites of polyvinylidene fluoride and zinc oxide (ZnO) were prepared by three different techniques: solution mixing (SM) followed by Nonsolvent Induced Phase Separation; and melt blending at both low- and high-shear rates (LS and HS) in a rheometer and mixing chamber, respectively, to compare the resultant morphology in photocatalysis. Photocatalytic efficiency was assessed by methylene blue (MB) discoloration in a batch reactor liquid phase and by resazurin (RZ) reduction. The changes promoted by nanoparticle inclusion, processing conditions and UV effect were demonstrated by FTIR-ATR, XRD, DSC, and SEM. Results showed that ZnO incorporation was successful under all processing conditions, providing effective photocatalytic composites. However, samples prepared by SM had a twofold increase in discoloration efficiency and fourfold increase in surface photoactivity, when compared with LS or HS-produced samples, explained by its higher porosity of 88% ± 1.3%. The covering of the photocatalyst surface was also evident on SEM analysis for melt blended samples, further contributing to reduction in their photocatalytic activity.     

Application of impregnation combustion method for fabrication of nanostructure CuO/ZnO composite oxide: XRD,FESEM, DRS and FTIR study

Nanostructured CuO/ZnO composite oxide was prepared by a novel impregnation combustion method using copper nitrate and zinc oxide tetrapod. The X-ray diffraction patterns revealed that CuO/ZnO composite oxide was formed. The effects of different impregnation combustion parameters on the properties of composite were studied by field-emission scanning electron microscope (FESEM), powder X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR) and UV–vis diffuse reflectance spectrum (DRS). The synthesis of ZnO–CuO nanocomposites through impregnation of a zinc oxide tetrapod with copper nitrate aqueous sodium carbonate solutions is reported. During thermal treatment the samples evolve toward the formation of nanocrystalline ZnO particles (zincite phase) dispersed onto tenorite, CuO annealed at 450 °C. XRD patterns of the precursors calcined at 450 °C showed the formation of the zincite–tenorite phases. Field emission scanning electron microscopy (FESEM) exhibited loosely agglomerated hexagonal particles with uniform morphology having a size around 50 nm.     

Ecofriendly poly(vinyl alcohol) and coconut shell powder composite films: Physico‐mechanical,thermal properties,and swelling studies

Poly(vinyl alcohol) (PVA) composites with 10, 20, 33, and 50 wt % of coconut shell (CCS) powder were prepared by aqueous mixing. The solution was casted as films and tested for physicomechanical properties such as tensile, tear, burst strengths, density, moisture content, moisture vapor transmission rate, moisture analysis; solubility resistance in water, 5% acetic acid, 50% ethanol, sunflower oil; swelling characteristics in 50% ethanol, sunflower oil; and thermal characteristics by differential scanning calorimetry. The PVA/CCS powder composite films show enhancement in elastic modulus, degradability, solubility resistance in water, 5% acetic acid, 50% ethanol, and moisture resistance. However, the introduction of CCS powder varies the tensile strength and affects percentage of elongation, tear and burst strengths, moisture content, density, and swelling capacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3862–3867, 2006     

Highly stable polyimide composite films based on 1,2,4-triazole ring reinforced with multi-walled carbon nanotubes: Study on thermal,mechanical, and morphological properties

A novel diamine bearing aromatic pendant triazole ring, namely, 3,5-diamino-N-(1H-[1,2,4]triazol-3-yl)-benzamide, was successfully synthesized. The prepared diamine and a commercial dianhydride were reacted in situ in the presence of carboxylated multi-walled carbon nanotubes (MWCNTs) with stirring to give a homogeneous MWCNT/poly(amic acid) mixture which was then heated under a heating program to give a series of MWCNT/polyimide (PI) composites with different proportions of MWCNT (5, 10, and 15 wt%). The composite films were tested for different properties including spectral, morphological, thermal, and mechanical properties. Scanning and transmission electron microscopy revealed the modified MWCNTs were well dispersed in the PI matrix while the structure of the polymer and the MWCNTs structure were stable in the preparation process. The thermal stability of the films containing MWCNTs was improved as the MWCNT content increased from 5 to 15 wt% due to the improved interfacial interaction between the PI matrix and surface-modified MWCNTs. Tensile tests on the composites showed an increase in the elastic modulus and the yield strength, and decrease in the failure strain.     

In situ fibre‐reinforced composite films of poly(lactic acid)/low‐density polyethylene blends: effects of composition on morphology,transport and mechanical properties

This study aimed to investigate the effects of blend composition on packaging‐related properties of poly(lactic acid) (PLA) and low density polyethylene (LDPE) blown films. Blend films with PLA contents of 5–20 wt% were produced and compared. Scanning electron micrographs of cross‐sectional cryofractured surfaces of the blend films revealed that in situ fibre‐reinforced composites were obtained. Viscosity ratio of the polymer components of ca 1 confirmed that fibre formation was favourable for this blend system. PLA microdomains were dispersed throughout the film in forms of long fibres (length‐to‐diameter ratio > 100) and ribbons. The number of fibres and ribbons increased with an increase of PLA content. Critical content of PLA was found to be 20 wt% for effective improvement of both moduli and gas barrier properties. Incorporation of poly[ethylene‐co‐(methyl acrylate)] compatibilizer showed minimal effect on PLA structure. However, it did improve moduli and O₂ barrier properties when sufficient amount (1.5 pph) was used in 10 wt% PLA/LDPE. In short, flow behaviour, ratio of polymer components and degree of compatibility together played intricate roles in the morphology and hence mechanical and transport properties of PLA/LDPE immiscible blends. © 2017 Society of Chemical Industry     

Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene

The allotropes of carbon nanomaterials (carbon nanotubes, graphene) are the most unique and promising substances of the last decade. Due to their nanoscale diameter and high aspect ratio, a small amount of these nanomaterials can produce a dramatic improvement in the properties of their composite materials. Although carbon nanotubes (CNTs) and graphene exhibit numerous extraordinary properties, their reported commercialization is still limited due to their bundle and layer forming behavior. Functionalization of CNTs and graphene is essential for achieving their outstanding mechanical, electrical and biological functions and enhancing their dispersion in polymer matrices. A considerable portion of the recent publications on CNTs and graphene have focused on enhancing their dispersion and solubilization using covalent and non-covalent functionalization methods. This review article collectively introduces a variety of reactions (e.g. click chemistry, radical polymerization, electrochemical polymerization, dendritic polymers, block copolymers, etc.) for functionalization of CNTs and graphene and fabrication of their polymer nanocomposites. A critical comparison between CNTs and graphene has focused on the significance of different functionalization approaches on their composite properties. In particular, the mechanical, electrical, and thermal behaviors of functionalized nanomaterials as well as their importance in the preparation of advanced hybrid materials for structures, solar cells, fuel cells, supercapacitors, drug delivery, etc. have been discussed thoroughly.