Scanning electrochemical microscopy 50. Kinetic study of electrode reactions by the tip generation-substrate collection mode

A scanning electrochemical microscopy (SECM) methodology for localized quantitative kinetic studies of electrode reactions based on the tip generation-substrate collection (TG-SC) operation mode is presented. This approach does not use the mediator feedback required in typical kinetic SECM experiments. The reactant is galvanostatically electrogenerated on a tip placed in proximity to the substrate. It diffuses through the tip-substrate gap and undergoes the reaction of interest on the substrate surface. The substrate current is monitored with time until it reaches an apparent steady-state value. The process was digitally simulated using an explicit finite difference method, for an irreversible first-order electrode reaction at the substrate. Transient responses, steady-state polarization curves, and TG-SC approach curves can be used to obtain substrate kinetics. The effects of the experimental parameters were analyzed. The possibility of easily changing the experimental conditions with the SECM is an attractive approach to obtain independent evidence that can be used for a strict test of reaction mechanisms. The technique was applied for a preliminary simplified kinetic examination of the oxygen reduction reaction in phosphoric acid.     

Scanning electrochemical microscopy with a band microelectrode: theory and application

Scanning electrochemical microscopy (SECM) is described using a band microelectrode tip. Numerical calculations allow the determination of approach curves of an insulating or a conductive substrate, and the numerical analysis is compared to experimental curves. Natural convection provides a steady-state current at the band microelectrode at an infinite distance from the substrate, and the band tip may be used in the SECM configuration as easily as the tip of a disk. Owing to the millimetric dimension of the band microelectrode, the substrate has an influence on the current at much longer distances than with the disk. Finally, the advantage of SECM with a band microelectrode is observed with the fast electrochemical modification of a fluoropolymer surface.     

Scanning electrochemical microscopy. 55. Fabrication and characterization of micropipet probes

The fabrication and characterization of novel micropipet probes for use in scanning electrochemical microscopy (SECM) are described. These can be used to dispense small (pL) amounts of a solution while monitoring the electrochemical response at a substrate and at a ring electrode tip on the micropipet probe. The probes were constructed by insulating gold-coated borosilicate micropipets with electrophoretic paint and exposing a ring electrode at the tip by heat treatment. Characterization of the probes was performed using scanning electron microscopy, cyclic voltammetry, and SECM approach curve experiments. Routine construction of tips with diameters of the order of 3 microm was possible using this technique. The probes exhibited stable steady-state currents and positive and negative feedback approach curves that agreed with those predicted by theory. Demonstrative SECM imaging experiments were performed using a picodispenser to continuously dispense an electroactive solution (ferrocenemethanol) to the SECM cell while the probe was located within a few micrometers of a Pt substrate surface. Oxidation of the dispensed electroactive solution was performed at the substrate, and feedback currents were measured at the probe tip by holding the gold ring at a reducing potential. This mode of tip-dispensing SECM was used to obtain images of a platinum substrate electrode while monitoring both the substrate current and the feedback current at the probe.     

Disk-generation/ring-collection scanning electrochemical microscopy: theory and application

The potential of ring-disk ultramicroelectrodes (RD UMEs) as probes for scanning electrochemical microscopy (SECM) was investigated both theoretically and experimentally. In particular, the disk-generation/ring-collection (DG/RC) mode of operation was considered. In this case, the interaction of two species with the substrate under investigation can be followed simultaneously from single tip current-distance measurement (approach curve) to the substrate. Theoretical approach curves for DG/RC were calculated by numerical methods. Such approach curves to both insulating and conducting substrates indicate a strong tip response dependence on the ring radius while the response was relatively insensitive to ring thickness and overall tip radius. The RD tip was characterized by fitting experimental approach curves recorded at insulating and conducting substrates to simulated curves for a given tip geometry. DG/RC SECM was then applied to investigate the partitioning of iodine across a liquid-liquid interface.     

Scanning electrochemical microscopy, 52. Bipolar conductance technique at ultramicroelectrodes for resistance measurements

The bipolar conductance, BICON, technique for the measurement of solution resistance, based on the application of microsecond current pulses, as originally described by Enke and co-workers for measurements with conventional electrodes, was extended for use with ultramicroelectrodes, with a focus on its application in scanning electrochemical microscopy (SECM). When the plateau time used to make the measurement lies within the BICON conditions, the solution conductance can be obtained directly from the output without the need for calibration curves. However, decreasing the size of the ultramicroelectrode decreases the range of values that satisfy these conditions, and one must resort to calibration curves to obtain solution conductance from the measured current, which was nevertheless found to be proportional to electrolyte concentration with electrodes as small as 5 mum in diameter. BICON/SECM approach curves over insulating substrates followed SECM negative feedback theory and approach curves in the presence of low (micromolar) or no added electrolyte are possible once the background conductivity is taken into account. Approach curves to a conducting substrate at open circuit potential are influenced by the solution time constant (solution resistance at the electrode tip x electrode double layer capacitance), which is a function of the tip/substrate distance, as well as the substrate size.     

Probing heterogeneous electron transfer at an unbiased conductor by scanning electrochemical microscopy in the feedback mode

The theory of the feedback mode of scanning electrochemical microscopy is extended for probing heterogeneous electron transfer at an unbiased conductor. A steady-state SECM diffusion problem with a pair of disk ultramicroelectrodes as a tip and a substrate is solved numerically. The potential of the unbiased substrate is such that the net current flow across the substrate/solution interface is zero. For a reversible substrate reaction, the potential and the corresponding tip current depend on SECM geometries with respective to the tip radius including not only the tip-substrate distance and the substrate radius but also the thickness of the insulating sheath surrounding the tip. A larger feedback current is obtained using a probe with a thinner insulating sheath, enabling identification of a smaller unbiased substrate with a radius that is approximately as small as the tip radius. An intrinsically slow reaction at an unbiased substrate as driven by a SECM probe can be quasi-reversible. The standard rate constant of the substrate reaction can be determined from the feedback tip current when the SECM geometries are known. The numerical simulations are extended to an SECM line scan above an unbiased substrate to demonstrate a "dip" in the steady-state tip current above the substrate center. The theoretical predictions are confirmed experimentally for reversible and quasi-reversible reactions at an unbiased disk substrate using disk probes with different tip radii and outer radii.     

Quasi-steady-state voltammetry of rapid electron transfer reactions at the macroscopic substrate of the scanning electrochemical microscope

We report on a novel theory and experiment for scanning electrochemical microscopy (SECM) to enable quasi-steady-state voltammetry of rapid electron transfer (ET) reactions at macroscopic substrates. With this powerful approach, the substrate potential is cycled widely across the formal potential of a redox couple while the reactant or product of a substrate reaction is amperometrically detected at the tip in the feedback or substrate generation/tip collection mode, respectively. The plot of tip current versus substrate potential features the retraceable sigmoidal shape of a quasi-steady-state voltammogram although a transient voltammogram is obtained at the macroscopic substrate. Finite element simulations reveal that a short tip-substrate distance and a reversible substrate reaction (except under the tip) are required for quasi-steady-state voltammetry. Advantageously, a pair of quasi-steady-state voltammograms is obtained by employing both operation modes to reliably determine all transport, thermodynamic, and kinetic parameters as confirmed experimentally for rapid ET reactions of ferrocenemethanol and 7,7,8,8-tetracyanoquinodimethane at a Pt substrate with ～0.5 μm-radius Pt tips positioned at 90 nm-1 μm distances. Standard ET rate constants of ～7 cm/s were obtained for the latter mediator as the largest determined for a substrate reaction by SECM. Various potential applications of quasi-steady-state voltammetry are also proposed.     

Kinetics of electron-transfer reactions at nanoelectrodes

The kinetics of several fast heterogeneous electron-transfer reactions were investigated by steady-state voltammetry at nanoelectrodes and scanning electrochemical microscopy (SECM). The disk-type, polished Pt nanoelectrodes (3.7-400-nm radius) were characterized by a combination of voltammetry, scanning electron microscopy, and SECM. A number of experimental curves were obtained at the same nanoelectrode to attain the accuracy and reproducibility similar to those reported previously for micrometer-sized probes. A new analytical approximation was developed and used for analysis of steady-state tip voltammograms. The self-consistent kinetic parameter values with the uncertainty margin of approximately 10% were obtained for electrodes of different radii and for a wide range of the SECM tip/substrate separation distances. The determined standard rate constants are compared to those previously measured at the electrodes of different dimensions, and the correlation between the heterogeneous and self-exchange rate constants is discussed.     

Fabrication and characterization of probes for combined scanning electrochemical/optical microscopy experiments

A technique that combines scanning electrochemical microscopy (SECM) and optical microscopy (OM) was implemented with a new probe tip. The tip for scanning electrochemicaVoptical microscopy (SECM/OM) was constructed by insulating a typical gold-coated near-field scanning optical microscopy tip using electrophoretic anodic paint. Once fabricated, the tip was characterized by steady-state cyclic voltammetry, as well as optical and electrochemical approach experiments. This tip generated a stable steady-state current and well-defined SECM approach curves for both conductive and insulating substrates. Durable tips whose geometry was a ring with < 1 microm as outer ring radius could be consistently fabricated. Simultaneous electrochemical and optical images of an interdigitated array electrode were obtained with a resolution on the micrometer scale, demonstrating good performance of the tip as both an optical and an electrochemical probe for imaging microstructures. The SECM feedback current measurements were successfully employed to determine tip-substrate distances for imaging.     

Scanning electrochemical microscopy. 57. SECM tip voltammetry at different substrate potentials under quasi-steady-state and steady-state conditions

We discuss SECM tip voltammetry, where a UME tip is held above a conductive substrate within about a tip radius and a tip voltammogram is recorded as its potential is slowly scanned while the substrate is held at a fixed potential. When the potential of the substrate is changed, the series of steady-state tip voltammograms provide information about the reactants and products. When the potential of the substrate, ES, is set so that the reaction at the substrate is opposite to that at the tip (the usual SECM conditions), a total positive feedback (tpf) tip voltammogram is recorded. When the substrate potential is set to values where the reaction at the substrate is the same as that occurring on the tip, the tip is shielded from the species in the bulk solution. Depending upon the substrate potential, this can cause total shielding (ts) or a voltammogram that is the result of partial feedback/partial shielding (pf-ps). The result is a series of tip voltammograms that are characterized by tpf, pf-ps, or ts, depending upon ES. Experimental tip voltammograms resulting from the reversible reduction of TCNQ and oxidation of ferrocene in MeCN are reported. These are compared with those from simulations and approximate equations developed to describe the features of the tip voltammograms generated under tpf, ts, or pf-ps conditions. The effect of the diffusion coefficient ratio on the ability of the UME tip to reach a true steady state is also addressed and possible applications, e.g., obtaining information about the reversibility of an electrochemical reaction, the product of an electrochemical reaction, the stability of that product, or the diffusion coefficients of the electroactive species, are discussed.     

Scanning electrochemical microscopy. 38. Application of SECM to the study of charge transfer through bilayer lipid membranes

The use of the scanning electrochemical microscope (SECM) to probe the kinetics of charge-transfer processes at bilayer lipid membranes (BLM) is presented. Analysis of the SECM tip response demonstrates that an unmodified BLM behaves as an insulator, whereas a BLM doped with iodine shows some positive feedback. The SECM technique thus allows one to probe processes at a BLM and determine the kinetics of the charge-transfer process. The SECM can also be used to determine the shape of the BLM.     

Scanning electrochemical microscopy with slightly recessed nanotips

Slightly recessed nanoelectrodes were prepared by controlled etching of nanometer-sized, flat Pt electrodes. By using high-frequency (e.g., 2 MHz) ac voltage, the layer of Pt as thin as greater, approximately >3 nm was removed to produce a cylindrical cavity inside the insulating glass sheath. The etched electrodes were characterized by combination of voltammetry and scanning electrochemical microscopy (SECM) to determine the radius and the effective depth of the recess. The theory was developed for current versus distance curves obtained with a recessed tip approaching either a conductive or an insulating substrate. Good agreement between the theoretical and experimental approach curves indicated that recessed nanotips are suitable for quantitative feedback mode SECM experiments.     

Scanning electrochemical microscopy: theory and characterization of electrodes of finite conical geometry

Finite conical electrodes, which are of particular interest as probes for imaging of surfaces using scanning electrochemical microscopy (SECM), in kinetic studies and in probing thin films were investigated. Theoretical SECM tip current-distance feedback (approach) curves for a finite conical electrode were calculated by numerical (finite element) analysis and compared to an earlier approximate model. The SECM curves obtained depended on the ratio of the base radius of the cone to the height of the cone and on the thickness of the insulating sheath. A new approach to fabricating conical tips of Pt in glass is described. These were used to obtain approach curves over both electrically conducting and insulating substrates. Comparison of experimental and simulated SECM approach curves provided a sensitive method of evaluating the size and shape of finite conical electrodes.     

Use of catechol as selective redox mediator in scanning electrochemical microscopy investigations

The use of catechols, and more specifically of dopamine, as a specific redox mediator for scanning electrochemical microscopy (SECM) investigations was evaluated in the challenging situation of an ultrathin layer deposited on a conductive substrate (carbon materials). Experiments show that dopamine is a well-adapted redox system for SECM in feedback mode and in unbiased conditions. Used as a redox mediator, catechol permits the investigations of modified surfaces without an electrical connection of the sample thanks to fast charge transfer kinetics but with a surface selectivity that does not exist in classical outer-sphere redox mediators. The interest of catechol in SECM as a sensitive redox mediator is exemplified by monitoring several modification steps of an ultrathin (<1 nm) hierarchically porous organic monolayer deposited on carbon substrates. For quantitative analysis, the SECM approach curves using dopamine could simply be characterized with an irreversible electron transfer kinetics model in a large range of pH.     

Scanning electrochemical microscopy. 41. Theory and characterization of ring electrodes

Ring ultramicroelectrodes, which are of particular interest as probes for scanning electrochemical microscopy (SECM), combined with near-field scanning optical microscopy, were investigated. Theoretical SECM tip current-distance (approach) curves for a ring electrode were calculated by numerical (finite element) analysis. The SECM curves obtained were a function of the geometry of the tips including the thickness of the ring and the insulating sheath. Theoretical approach curves over conductive substrates showed a strong dependence on the ratio of inner to outer radii of ring microelectrodes (a/b) and were relatively insensitive to the thickness of the insulating sheath (r(g)). For insulating substrates, however, the approach curves varied significantly with r(g), but much less with the a/b ratio. Comparison of experimental and theoretical SECM curves provided a good method of evaluating the size and shape of ring electrodes. Good agreement of the experimental and theoretical curves was found with a ring microelectrode with a nominal 200-nm ring thickness, yielding values of 1.7, 1.9, and 5.7 microm for the inner (a) and outer (b) radii of a ring and the outermost radius of insulating sheath (r(g)), respectively.     

Forced convection during feedback approach curve measurements in scanning electrochemical microscopy: maximal displacement velocity with a microdisk

In scanning electrochemical microscopy (SECM), an approach curve performed in feedback mode involves the downward displacement of a microelectrode toward a substrate while applying a bias to detect dissolved electroactive species at a diffusion-limited rate. The resulting measured current is said to be at steady state. In order to reduce the required measurement time, the approach velocity can be increased. In this paper, we investigate experimentally and theoretically the combination of diffusion and convection processes related to a moving microdisk electrode during feedback approaches. Transient modeling and numerical simulations with moving boundaries are performed, and the results are compared to the experimental approach curves obtained in aqueous solution. The geometry and misalignment of the microelectrode influence the experimental approach curves recorded at high approach velocities. The effects are discussed through the decomposition of the current into transient diffusional, radial convectional, and axial convectional contributions. Finally a ready-to-use expression is provided to rapidly evaluate the maximal approach velocity for steady state measurements as a function of the microelectrode geometry and the physical properties of the media. This expression holds for the more restrictive case of negative feedback as well as other modes, such as SECM approach curves performed at substrates displaying first order kinetics.     

Permeability of the nuclear envelope at isolated Xenopus oocyte nuclei studied by scanning electrochemical microscopy

In interphase eukaryotic cells, molecular transport between the cytoplasm and the nucleus is mediated by the nuclear pore complex (NPC), which perforates the double-membraned nuclear envelope (NE). Local permeability of the NE at large intact nuclei (approximately 400 microm in diameter) isolated from Xenopus laevis oocytes was studied by scanning electrochemical microscopy (SECM). Steady-state tip current versus tip-nucleus distance curves (approach curves) were measured with 10- and 2-microm-diameter Pt disk microelectrodes at the nuclei in isotonic buffer solutions containing redox-active molecules. The approach curves in the normalized form are independent of the tip diameter, indicating diffusion-limited membrane transport of the redox molecules. SECM chronoamperometry demonstrated that a decrease in the steady-state tip current at short tip-nucleus distances is due to smaller diffusion coefficients and concentrations of the redox molecules in the nucleus than those in the buffer solution. The experimental approach curves fit very well with theoretical ones for freely permeable membranes, yielding the NE permeability to the molecules that is at least 2 orders of magnitude larger than permeability of bilayer lipid membranes and cell membranes. This result indicates that passive transport of the redox molecules across the NE is facilitated by open NPC pores. The flux of the redox molecules sustainable by a single NPC channel (>9.8 x 10(6) molecules per NPC per second) and the diameter of the channel pore (>15 nm) were estimated from the SECM data by assuming the NE as an array of nanometer-sized NPC pores. The effects of the redox molecules on the nucleus and the NPC function were examined by studying signal-mediated nuclear import of rhodamine-labeled bovine serum albumin with and without nuclear localization signals by fluorescence microscopy.     

Scanning electrochemical microscopy. 58. Application of a micropipet-supported ITIES tip to detect Ag+ and study its effect on fibroblast cells

We report the use of a micropipet-supported ITIES (interface between two immiscible electrolyte solutions, also called a liquid/liquid (L/L) or water/oil (W/O) interface) as a scanning electrochemical microscopy (SECM) tip to detect silver ion and explore Ag+ toxicity in living cells. A 1,2-dichloroethane solution containing a commercially available calixarene-based Ag+ ionophore (IV) was injected into a micrometer-size glass pipet to construct an Ag+-selective SECM tip. The local Ag+ concentration, down to the micromolar level, in the vicinity of living fibroblast cells, was monitored by SECM approach curves and through imaging of the uptake and efflux of Ag+ by living fibroblast cells in real time. The results show that several stages of interaction between Ag+ and fibroblast cells exist. Since a number of biological processes of cells are involved with non-redox-active ions, the work presented here provides a new way to explore cell metabolism, drug delivery, and toxicity assessment by SECM.     

Surface reactivity from electrochemical lithography: illustration in the steady-state reductive etching of perfluorinated surfaces

The scanning electrochemical microscope (SECM) in the lithographic mode is used to assess quantitatively, from both theoretical and experimental points of view, the kinetics of irreversible transformation of electroactive molecular moieties immobilized on a surface as self-assembled monolayers (SAMs). The SECM tip allows the generation of an etchant that transforms the surface locally and irreversibly. The resulting surface patterning is detectable by different surface analyses. The quantification of the surface transformation kinetics is deduced from the evolution of the pattern dimensions with the etching time. The special case of slow etching kinetics is presented; it is predicted that the pattern evolution follows the expansion of the etchant at the substrate surface. The case of a chemically unstable etchant is considered. The model is then tested by inspecting the slow reductive patterning of a perfluorinated SAM. Good agreement is found with different independent SECM interrogation modes, depending on the insulating or conducting nature of the covered substrate. The surface transformation measurements are also compared to the reduction of solutions of perfluoroalkanes. The three-orders-of-magnitude-slower electron transfer observed at the immobilized molecules likely describes the large reorganization associated with the generation of a perfluoroalkyl-centered radical anion.     

Polished nanopipets: new probes for high-resolution scanning electrochemical microscopy

Nanometer-sized pipets pulled from glass or quartz capillaries have been extensively used as probes for scanning electrochemical microscopy (SECM) and scanning ion conductance microscopy (SICM). A small separation distance between such a probe and the sample, which is required for high-resolution SECM measurements, may be hard to attain because of considerable roughness of the pipet tip. In this Letter, we report the preparation and characterization of polished nanopipet SECM probes with a much smoother tip edge. Using polished pipets, quantitative SECM measurements were performed at extremely short tip/substrate distances (e.g., d ≈ 1 nm).