Iron-mediated reversible deactivation controlled radical polymerization

Metal-mediated reversible deactivation radical polymerization (RDRP) is now a cornerstone of functional polymer synthesis, dominated by copper complexes and the Atom Transfer Radical Polymerization (ATRP) moniker. A limitation of this approach is the contamination of the resultant polymers by the coloured copper complexes, thus requiring further purification, although protocols to reduce the amount of copper catalyst have been developed. Iron is an interesting alternative because of its low cost, low toxicity and reduced intensity of its optical absorption spectrum. Use of this metal in RDRP began in the late 90s and has continuously intensified. This review comprehensively covers all the work reported so far on RDRP mediated by iron complexes, organized according to ligand type, and discusses the specificities of this metal in terms of the multitude of accessible spin states and the interplay of different equilibria: atom transfer vs. direct radical trapping, associative vs. dissociative exchange, chain transfer by direct β-H atom transfer vs. β-H elimination from the dormant alkyl species.     

Modeling and theoretical development in controlled radical polymerization

Controlled radical polymerization (CRP) systems have gained increasing interests for the past two decades. Numerous publications may be found in the literature reporting experimental and modeling work on various CRP processes, including their use in surface modification through grafting. Knowledge of underlying mechanism behind polymerization systems is valuable for product design and process optimization. This information may be obtained through the combination of modeling and experimental studies. In this review, published studies on kinetic and stochastic based modeling for CRP systems are summarized. Their relevance in model discrimination of proposed mechanisms is discussed. This review also includes various parameter estimation studies, that is crucial to obtain accurate simulation predictions. Existing issues on the fundamental mechanism in CRP processes are also addressed.     

Effects of molecular weight on liquid-crystalline behavior of a mesogen-jacketed liquid crystal polymer synthesized by atom transfer radical polymerization

The synthesis of poly{2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene} (PMPCS) with different molecular weight and low polydispersity was achieved by atom transfer radical polymerization in methoxybenzene solution using 1-bromoethylbenzene as an initiator and CuBr/sparteine complex as a catalyst. The concentration of the living centers throughout the polymerization was found to be constant. The liquid-crystalline behavior of the polymers with M_n ranging from 3800 to 17,400 g/mol was studied using DSC and POM. Only the polymers with M_n beyond 10,200 g/mol formed a liquid-crystalline phase, which was quite stable with a high clearing point (higher than the decomposition temperature of the polymer).     

One pot,two step sequence converting atom transfer radical polymerization directly to radical trap-assisted atom transfer radical coupling

Monobrominated polystyrene (PStBr) chains were prepared using standard atom transfer radical polymerization (ATRP) procedures at 80 °C in THF, with monomer conversions allowed to proceed to approximately 40%. At this time, additional copper catalyst, reducing agent, and ligand were added to the unpurified reaction mixture, and the reaction was allowed to proceed at 50 °C in an atom transfer radical coupling (ATRC) phase. During this phase, polymerization continued to occur as well as coupling; expected due to the substantial amount of residual monomer remaining. This was confirmed using gel permeation chromatography (GPC), which showed increases in molecular weight not matching a simple doubling of the PStBr formed during ATRP, and an increase in monomer conversion after the second phase. When the radical trap 2-methyl-2-nitrosopropane (MNP) was added to the ATRC phase, no further monomer conversion occurred and the resulting product showed a doubling of peak molecular weight (M_p), consistent with a radical trap-assisted ATRC (RTA-ATRC) reaction.     

Electrochemically mediated atom transfer radical polymerization (eATRP)

This review covers both fundamental aspects and applications of electrochemically mediated atom transfer radical polymerization (eATRP). eATRP setup is discussed in detail, together with the advantages and limitations of this technique. All relevant parameters that can influence eATRP outcome are evaluated (e.g. applied current and potential, stirring and diffusion, solvents and supporting electrolytes). Various materials prepared by eATRP are described, including homopolymers, block copolymers, star polymers, and surface grafted polymer brushes. In addition, other electrochemical techniques conceptually similar to eATRP are discussed, including copper-catalyzed azide-alkyne cycloaddition, electrochemical micropatterning, reversible addition-fragmentation chain transfer polymerization using redox-sensitive initiators, and catalyst removal by electrochemical reduction. The increasing research activity in the last decade indicates that electrochemically regulated methods are becoming valuable tools in the design and synthesis of advanced polymer materials.     

原位合成引发剂引发原子转移自由基及衰减链转移同步聚合

在甲基丙烯酸甲酯(MMA)单体中,以偶氮二异丁腈(AIBN)与I2反应原位合成α-碘代异丁腈(IIBN),进一步作为原子转移自由基聚合引发剂分别与CuCl、FeCl2.4H2O等催化剂,MA5-DETA、PMDETA等络合剂相匹配引发MMA的ATRP,同时又作为衰减链转移聚合(DT)的可逆链转移剂同步进行DT聚合。实验结果表明:所得聚合物分子量可控,分子量分布(PDI)很窄(1.05～1.25),引发剂效率较高。动力学的研究结果显示:分子量随转化率而增长;由Ln[M]0/[M]t对时间作图,呈现良好的线形关系,表明聚合过程中增长自由基浓度是一个恒定值,证明由IIBN引发的聚合是典型的活性自由基聚合;这种方法克服了极不稳定的在α-位带有吸电子基团的碘化物的购运和储存的困难。不失是一种简单,快捷,方便的方法。     

Synthesis of binary mixed homopolymer brushes by combining atom transfer radical polymerization and nitroxide-mediated radical polymerization

This communication describes a novel strategy to synthesize binary mixed homopolymer brushes from mixed self-assembled monolayers (SAMs) on silica substrates by combining atom transfer radical polymerization (ATRP) and nitroxide-mediated radical polymerization (NMRP). Mixed SAMs terminated by ATRP and NMRP initiators were prepared by coadsorption of two corresponding organotrichlorosilanes from toluene solutions. Mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes were synthesized by ATRP of MMA at 80 °C followed by NMRP of styrene at 115 °C. Corresponding ‘free’ initiators were added into the solutions to control the polymerizations. We have found that the brush thickness increases with molecular weight in a nearly linear fashion. For a series of binary brushes consisting of PMMA of molecular weight of 26,200 and PS of various molecular weights, we have observed a transition in water contact angles with increasing PS molecular weight after CH₂Cl₂ treatment. Moreover, binary mixed polymer brushes with comparable molecular weights for two grafted polymers undergo reorganization in response to environmental changes, exhibiting different wettabilities.     

Chain extension and block copolymer synthesis using silane radical atom abstraction coupled with nitroxide mediated polymerization

Silane radicals were used to abstract bromine termini from monobrominated polystyrene (PStBr) in the presence of excess monomer and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), generating polymer radicals that underwent chain extension. Typically, 70-85% of the PStBr precursors were activated by silane radical atom abstraction (SRAA) and were elongated by nitroxide mediated polymerization (NMP), shifting to higher number-average molecular weight (M_n) values as observed by gel permeation chromatography (GPC). Chain extension did not occur until the temperature was elevated to 130 °C, with no increase in M_n values observed when the reaction was held at 80 °C, which is the temperature of the SRAA phase. The NMP phase of the reaction showed a linear correlation between M_n values and monomer consumption, along with first order kinetics with respect to styrene. SRAA/NMP was then applied to the synthesis of polystyrene-b-poly(n-butyl acrylate) and polystyrene-b-poly(p-methylstyrene), with analysis by GPC indicating the formation of block copolymers with a similar amount of unreacted PStBr remaining. Quantitative activation and elongation of the polymer precursors were prevented due to the ability of both the t-butoxy radicals and tris(trimethylsilyl)silane radicals to add across monomeric double bonds, competing with atom abstraction. Reactions were thus performed in which the monomer was added only after the transition to the higher temperature, which resulted in improved activation of the PStBr.     

Controlled/living radical polymerization in aqueous media: homogeneous and heterogeneous systems

Controlled/living radical polymerizations carried out in the presence of water have been examined. These aqueous systems include both the homogeneous solutions and the various heterogeneous media, namely dispersion, suspension, emulsion and miniemulsion. Among them, the most common methods allowing control of the radical polymerization, such as nitroxide-mediated polymerization, atom transfer radical polymerization and reversible transfer, are presented in detail.     

A novel ligand for atom transfer radical polymerization

A ligand is a crucial element for atom transfer radical polymerization (ATRP). A new nitrogen-containing compound, 1,1’-(2,2’-(ethane-1,2-diylbis(butyl azanediyl)) -bis(ethane-2,1-diyl)) dipyrrolidin-2-one (DBBD), was synthesized and utilized as the ligand of copper halide for ATRP of methyl methacrylate (MMA) and methyl acrylate (MA). It was found that the CuBr/DBBD and Ethyl 2-bromoisobutyrate (EBIB) system could mediate the polymerization of MMA and the reaction was first-order kinetics, although the control of molecular weights was not perfect. When CuCl was used to replace CuBr, the molecular weights of obtained polymers were well controlled, which indicated the halide exchange could improve the controllability. In the polymerization of MA using Methyl 2-bromopropronate (MBP) or EBIB as initiator and CuCl/DBBD as catalyst, good control of the polymerization could be achieved and the molecular weights were very close to the predicted value.     

High-pressure atom transfer radical polymerization of methyl methacrylate for well-defined ultrahigh molecular-weight polymers

The feasibility of high-pressure atom transfer radical polymerization (ATRP) for synthesizing well-defined polymers of extraordinarily high molecular weights was demonstrated. ATRP of methyl methacrylate (MMA) under pressures up to 500 MPa was investigated at 60 °C. The addition of a small amount of a Cu(II)Cl₂/ligand complex along with the general benefits of high pressure of enhancing propagation and suppressing termination brought about an excellent control of polymerization even with an extremely low concentration of ATRP initiator. For example, there was produced PMMA with a number-average molecular weight M_n of 3.6 × 10⁶ and a polydispersity index of 1.24, which had never been achieved by conventional ATRP.     

Star polymers via atom transfer radical polymerization from adamantane-based cores

A series of novel multifunctional initiators derived from adamantane-based derivatives have been used in the syntheses of various styrenic and (meth)acrylic star polymers by atom transfer radical polymerization (ATRP). Conditions were identified in each system to produce star polymers with nearly monomodal molecular distributions. These synthesized star polymers have glass transition temperatures similar to those known for high-molecular-weight linear polymers. We obtained a series of adamantane-contained star polymers covering a wide range of molecular weights by adjusting the monomer-to-initiator ratio and the solvent polarity. Because of reaction heterogeneity and inevitable termination processes, the occurrence of star-star coupling led to a lower than predicted molecular weight polydispersity. When hydrolyzed from their cores by NaOH, the values of M_w of the arms of the PMMA star polymer did not change with reaction time, at least for the first 48 h of the reaction, which implies that no significant PMMA hydrolysis occurs within this interval of time.     

Emulsion atom transfer radical polymerization of 2-ethylhexyl methacrylate

The emulsion atom transfer radical polymerization (ATRP) of 2-ethylhexyl methacrylate (EHMA) was carried out with ethyl 2-bromoisobutyrate (EBiB) as an initiator and copper bromide (CuBr)/4,4′-dinonyl-2,2′-bipyridyl (dNbpy) as a catalyst system. The effects of surfactant type and concentration, temperature, monomer/initiator ratio, and CuBr₂ addition on the system livingness, polymer molecular weight control, and latex stability were examined in detail. It was found that the polymerization systems with Tween 80 and Brij 98 as surfactants at 30 °C gave the best latex stability. The polymer samples prepared under these conditions had narrow molecular weight distributions (M_w/M_n=1.1-1.2) and linear relationships of number-average molecular weight versus monomer conversion.     

Surface-initiated atom transfer radical polymerization of methyl methacrylate on magnetite nanoparticles

The synthesis of magnetite nanoparticles coated with a well-defined graft polymer is reported. The magnetite nanoparticles with an initiator group for copper-mediated atom transfer radical polymerization (ATRP), 2-(4-chlorosulfonylphenyl) ethyltrichlorosilane (CTCS) chemically bound on their surfaces were prepared by the self-assembled monolayer-deposition method. The surface-initiated ATRP of methyl methacrylate (MMA) was carried out with the CTCS-coated magnetite nanoparticles in the presence of free (sacrificing) initiator, p-toluenesulfonyl chloride. Polymerization proceeded in a living fashion, exhibiting first-order kinetics of monomer consumption and a proportional relationship between molecular weight of the graft polymer and monomer conversion, thus providing well-defined, low-polydispersity graft polymers with an approximate graft density of 0.7 chains/nm². The molecular weight and polydispersity of the graft polymer were nearly equal to those of the free polymer produced in the solution, meaning that the free polymer is a good measure of the characteristics of the graft polymer. The graft polymer possessed exceptionally high stability and remarkably improved dispersibility of the magnetite nanoparticles in organic solvent.     

原子转移自由基聚合在生物材料合成方面的应用

介绍了原子转移自由基聚合的原理及其在生物材料合成方面的应用。     

原子转移自由基聚合原理及应用

介绍了有关原子转移自由基聚合(ATRP)的聚合原理。最新研究表明:应用ATRP法进行聚合反应可以制备接枝聚合物、嵌段聚合物、超支化聚合物和其它有机/无机混合型聚合物等。ATRP在高分子聚合反应领域具有十分广阔的应用前景。     

Mechanistic investigation of 9-bromoanthracene photodimers as initiators in atom transfer radical polymerization

Mechanistic pathways accounting for the lack of control in polymerizations employing photodimers of 9-bromoanthracene as alkyl halide initiators in atom transfer radical polymerization (ATRP) reactions are presented. Converting the aryl bromide on the anthracene moiety into an alkyl bromide via a [4+4] cycloaddition reaction effectively generated the photodimer with two alkyl halide sites, which were investigated as potential initiating sites for the ATRP of styrene and n-butyl acrylate. Polymers synthesized using these photodimers as initiators possessed relatively broad polydispersity index (PDI) values and displayed a non-linear relationship between their number average molecular weights (M_n) and monomer consumption, consistent with slow initiation from the bridgehead alkyl halide. Reactions performed at 80 °C in bulk or THF generated polystyrene with M_n values 3-5 times higher than calculated based on monomer-to-initiator ratios. UV-vis spectrometry of the products demonstrated absorbance bands indicative of polymer-bound anthracene, caused by thermal degradation of the photodimer during the polymerization. When the initiator was introduced last into the reaction mixture in an attempt to suppress photodimer cleavage prior to initiation, PDI values and M_n values were generally lowered with the resulting polymers showing similarly high anthracene content. Composition of polystyrene and poly(n-butyl acrylate) products was also studied as a function of reaction temperature, with decreased anthracene labeling observed at lower temperatures (40 and 60 °C), further validating a model of heat-induced cleavage of the photodimer.     

Atom transfer radical suspension polymerization of methyl methacrylate catalyzed by CuCl/bpy

Atom transfer radical suspension polymerization (suspension ATRP) of methyl methacrylate (MMA) was carried out using 1-chloro-1-phenylethane (1-PECl) as initiator, copper chloride/bipyridine (CuCl/bpy) as catalyst. The polymerization was accomplished with a mechanical agitator under the protection of nitrogen atmosphere. Apart from the dispersing agent (1% PVA), NaCl was also used in the water phase to decrease the diffusion of CuCl/bpy to water and the influence of the concentration of NaCl was investigated. Subsequently, the kinetic behavior of the suspension ATRP of MMA at different temperatures was studied. At 90 and 95 °C, the polymerization showed first order with respect to monomer concentration until high conversion. The molecular weight (M_n) of the polymer increased with monomer conversion. However, at lower temperatures, different levels of autoacceleration was observed. The polymerization deviated from first order with respect to monomer concentration when the conversion was up to some degree. The lower the temperature was, the more the deviation displayed. On comparison with bulk ATRP of MMA, the rate of suspension ATRP was much faster.     

Synthesis and characterization of hyperbranched azobenzene-containing polymers via self-condensing atom transfer radical polymerization and copolymerization

We report on the synthesis of an azobenzene-containing inimer 6-{4-[4-(2-(2-bromoisobutyryloxy)hexyloxy)phenylazo]phenoxy}hexyl methacrylate (I) and used it to prepare hyperbranched homopolymer and copolymers by self-condensing vinyl polymerization (SCVP) and copolymerization (SCVCP) with its precursor 6-{4-[4-(6-hydroxyhexyloxy)phenylazo]phenoxy}hexyl methacrylate (M) using atom transfer radical polymerization (ATRP). Depending on the comonomer ratio, γ=[M]₀/[I]₀, branched polymethacrylates with number-average weights between 8000 and 20,000 and degree of branching (DB) between 0.08 and 0.49 were obtained by SCVCP, as evidenced by GPC and ¹H NMR analysis. In addition, the photochemical properties of the polymers were also studied by UV-vis spectra and found the structure of polymers affect obviously the trans-cis isomerization properties of the branched polymers.     

Novel fluorescent polynorbornenes with multi-functional armed structure by using highly stable block macroinitiators via a combination of living ring-opening metathesis polymerization and atom transfer radical polymerization

Novel organosoluble fluorescent polynorbornenes with multi-functional armed structure were designed and prepared by using highly stable block macroinitiators via a combination of living ring-opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP). A bromo-containing functional norbornene (NBMBr) was prepared from the Diels-Alder reaction of cyclopentadiene and allyl bromide. The diblock copolymer of 5-(N-carbazolyl methyl)bicycle[2.2.1]hept-2-ene (CbzNB) and NBMBr was successfully prepared using living ROMP and used as a novel macroinitiator [poly(CbzNB-b-NBMBr)] for ATRP. Carbazoyl-containing multi-functional armed copolymer with poly(methyl methacrylate) (PMMA) was prepared by using poly(CbzNB-b-NBMBr) as a macroinitiator for ATRP. Strong fluorescence emissions (370-450 nm) were observed in the low excimer-forming multi-functional armed fluorescent polynorbornenes. The fact is that low excimer-forming carbazole-containing polymeric compound would apparently be favorable in photoconductive materials. The multi-functional armed structure make this compound an attractive candidate for applications as multi-modified hole transport materials in molecular electronic devices. Multi-modification could be further considered to be carried out by using such a functional bromo group at the end of multi-arms.