Distribution of α-AlFeSi and β-AlFeSi particles in surface layer of AA6063 alloy billets after heat treatment

We developed the EPMA mapping method of small -AlFeSi(Al_8.3Fe₂Si) and -AlFeSi(Al_8.9Fe₂Si₂) particles in the billets of Al-Mg-Si alloys such as AA6063 alloys. To discriminate between -AlFeSi and -AlFeSi particles we used the relative X-ray intensities of Fe/Si ratio, the I _Fe/I _Si ratio, instead of the Fe/Si mass ratio. To obtain the I _Fe/I _Si ratio, we used a Monte Carlo method. In this study, using this method the mapping of -AlFeSi and -AlFeSi particles in the surface layer of AA6063 billets after the heat treatment (for 2 h at 580°C) was done. Namely, the distribution of -AlFeSi and -AlFeSi particles of zones from the billet surface to a depth of 800 m was measured. Results showed the zone from the surface to a depth of 200 m was occupied mainly by -AlFeSi particles and the zone from a depth of 200 m toward the center was occupied mainly by -AlFeSi particles. From these results, it was found that if we remove zones from the surface to a depth of 200 m, we can remove the majority of the -AlFeSi particles, and thus improve the quality of anodizing performance of Al-Mg-Si alloys extrusions.     

Nonlinear asymptotic theory of hypersonic flow past a circular cone

Summary The hypersonic small-disturbance theory is reexamined in this study. A systematic and rigorous approach is proposed to obtain the nonlinear asymptotic equation from the Taylor-Maccoll equation for hypersonic flow past a circular cone. Using this approach, consideration is made of a general asymptotic expansion of the unified supersonic-hypersonic similarity parameter together with the stretched coordinate. Moreover, the successive approximate solutions of the nonlinear hypersonic smalldisturbance equation are solved by iteration. Both of these approximations provide a closed-form solution, which is suitable for the analysis of various related flow problems. Besides the velocity components, the shock location and other thermodynamic properties are presented. Comparisons are also made of the zeroth-order with first-order approximations for shock location and pressure coefficient on the cone surface, respectively. The latter (including the nonlinear effects) demonstrates better correlation with exact solution than the zeroth-order approximation. This approach offers further insight into the fundamental features of hypersonic small-disturbance theory.Notation a speed of sound - H unified supersonic-hypersonic similarity parameter, - K hypersonic similarity parameter, M - M freestream Mach number - P pressure - T temperature - S entropy - u, v radial, polar velocities - V freestream velocity - shock angle - cone angle - density - density ratio, /() - ratio of specific heats - polar angle - stretched polar angle, / - (), (), () gage functions     

High-frequency dielectric properties of Mg-Al-Si,Ca-Al-Si and Y-Al-Si oxynitride glasses

Recently developed coaxial line techniques [1] have been used to determine, at room temperature, the values of the real () and imaginary (') parts of the dielectric constants for some Mg-Al-Si, Ca-Al-Si and Y-Al-Si oxynitride glasses over the frequency range 500 MHz to 5 GHz. The frequency dependencies of and ' are consistent with the universal law of dielectric response in that (-_t8)^(n–1) and '^(n–1) for all glass compositions; the high experimental value of the exponent (n=1.0±0.1) suggests the limiting form of lattice loss [2] situation. In this frequency range, as previously reported [3] at longer wavelengths, the addition of nitrogen increases the dielectric constant, (); in both the oxide and oxynitride glasses is also influenced by the cation, being increased with cation type in the order magnesium, yttrium, calcium as at lower frequencies.     

Transport property and battery discharge characteristic studies on 1−x(0.75Agl∶0.25AgCl)∶ xAl2O3 composite electrolyte system

Various experimental studies on a new fast Ag⁺ ion-conducting composite electrolyte system: (1–x) (0.75Agl0.25AgCl)xAl₂O₃ are reported. Undried Al₂O₃ particles of size <10 m were used. The conventional matrix material Agl has been replaced by a new mixed 0.75Agl0.25AgCl quenched and/or annealed host compound. Conductivity enhancements 10 from the annealed host and 3 times from the quenched host obtained for the composition 0.7(0.75Agl0.25AgCl)0.3Al₂O₃, can be explained on the basis of the space charge interface mechanism. Direct measurements of ionic mobility as function of temperature together with the conductivity were carried out for the best composition. Subsequently, the mobile ion concentration n values were calculated from and a data. The value of heat of ion transport q* obtained from the plot of thermoelectric power versus 1/T supports Rice and Roth's free ion theory for superionic conductors. Using the best composition as an electrolyte various solid state batteries were fabricated and studied at room temperature with different cathode preparations and load conditions.     

Response of a spinning liquid column to axial excitation

Summary The response of a solidly rotating finite liquid column consisting of frictionless liquid is subjected to axial harmonic excitation. The response of the free liquid surface elevation and velocity distribution has been determined in the elliptic (>2 ₀) and hyperbolic frequency range (>2 ₀).Notation a radius of liquid bridge - h length of liquid bridge - I ₀,I ₁ modified Besselfunctions - J ₀,J ₁ Besselfunctions - P liquid pressure - r, ,z cylindrical polar coordinates - t time - u, v, w velocity distribution in rotating liquid - axial excitation amplitude - elliptic case (>2 ₀) - hyperbolic case (>2 ₀) - liquid density - surface tension - liquid surface displacement - acceleration potential - ₀ rotational speed - axial forcing frequency - natural frequency of rotating system - _02n –1 natural frequency of harmonic axial response With 8 Figures     

Breakup of an anomolously viscous liquid film in a centrifugal force field

An equation is obtained for the breakup radius with consideration of tipping moments and Laplacian pressure forces acting on the liquid ridge at the critical point.Notation K, n rhenological constants - density - surface tension - r current cup radius - R maximum cup radius - r_c critical radius for film breakup - ¯r=¯r=r/R dimensionless current radius - ¯r_c=r_c/R dimensionless critical radius - ₀, _c actual and critical film thicknesses - current thickness - R_r ridge radius - h₀ ridge height - h current ridge height - ₀ limiting wetting angle - current angle of tangent to ridge surface - angle between axis of rotation and tangent to cup surface - angular velocity of rotation - q volume liquid flow rate - v₁ and v meridional and tangential velocities - =4vv _lm/r,=4v_m/r dimensionless velocities - M moments of surface and centrifugal forces - M_v moment from velocity head - p_r pressure within ridge - P_vm pressure from velocity head - p_m, p_pm pressures from centrifugal force components tangent and normal to cup surface - deviation range of breakup radius from calculated value - ¯r_max, ¯r_min limiting deviations of breakup radius - _c angle of tangent to curve _c/°₀=f(¯r) at critical point - t random oscillation of ratio _c/_c Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 51–56, July, 1980.     

Relationship between the structure and mechanical properties in ß III titanium alloy

The ageing reactions that take place during the heat-treatment of solution-treated III titanium (11.5 wt% Mo, 6 wt% Zr, 4.5 wt% Sn, balance Ti) were followed by detailed structure characterization using electron microscopy. The variations in mechanical properties with heat treatment were also followed systematically. The electron microscopy investigations indicated that the omega phase formed on quenching. The size and volume fraction of the omega phase increased on subsequent ageing,, and phases were found to co-exist at ageing temperatures between 800 and 900° F (427 and 482° C) for short ageing times. From the observations of interfacial dislocations at the/ interface and the precipitation of fine alpha near the omega particles, with a morphology that is characteristic of the prior morphology, it is suggested that the-phase forms directly from the omega phase. The observed increase in yield strength over the solution-treated condition, due to the precipitation of phase, was found to agree well with that predicted by the Orowan hardening mechanism. Since the precipitation of fine ellipsoidal-phase was found to increase the yield strength of the alloy with reasonable ductility, it is suggested that the optimum heat treatment to produce high strength with good ductility in III titanium is to age at 900° F (482° C) for 10 to 25 h.     

The Interplay of Electronic and Nuclear Magnetism in PtFe x at Milli-, Micro-, and Nanokelvin Temperatures

We have measured ac susceptibility, nuclear magnetic resonance, and nuclear heat capacity of two PtFe _x samples with concentrations of magnetic impurities x = 11 ppm and 41 ppm at magnetic fields (0 ± 0.05) mTB248 mT. The susceptibility data have been measured at temperatures of 0.3 KT100 mK, no hint for nuclear magnetic ordering could be detected to a temperature of 0.3 K. The nuclear heat capacity data taken at 1.4 KT10 mK show enhanced values which scale with x at low polarization. This effect is described by a model assuming an internal magnetic field caused by the impurities. No indication for nuclear magnetic ordering could be detected to 1.4 K. The nuclear magnetic resonance experiments have been performed on these samples at 0.8 KT0.5 mK and 2.5 mTB22.8 mT as well as on three other samples with x = 5, 10, 31 ppm in a different setup at 40 KT0.5 mK and at 5.4 mTB200 mT. Spin-lattice and effective spin-spin relaxation times ₁and ₂ ^* of ¹⁹⁵ Pt strongly depend on x and on the external magnetic field. No temperature dependence of ₁and ₂ ^* could be detected and the NMR data, too, give no hint for nuclear magnetic ordering to 0.8 K.     

Mössbauer studies of α″-Fe16N2 and α′-Fe8N films

Conversion-electron Mössbauer spectra of epitaxial -Fe₁₆N₂ and -Fe₈N films have been studied and their differences are discussed in detail. The Mössbauer spectrum of -Fe₁₆N₂ can be decomposed into three subspectra, which correspond to the 4d, 8h and 4c sites. The Mössbauer spectrum of -Fe₈N can be fitted using four spectra based on a nitrogen-atom-random-distribution model. The average hyperfine field is larger (3%) for -Fe₁₆N₂ than for -Fe₈N, which is approximately consistent with a 4.1% enhancement of the magnetic moments for -Fe₁₆N₂. The iron moments tend to locate in the film plane for -Fe₁₆N₂ and to arrange perpendicularly to the film plane for -Fe₈N.     

Thermodynamic properties of the superconductorsBaPb 0.7 Bi 0.3 O 3 andBa 0.7 K 0.3 BiO 3 using Eliashberg theory

We present results of a thermodynamic analysis for the superconductors compounds BaPb_0.7Bi_0.3O₃ and Ba_0.7K_0.3BiO₃. The physical quantities are calculated making use of the Eliashberg theory and the electron-phonon spectra ²()F() as calculated by Shirai et al. For the superconductor BaPb_0.7Bi_0.3O₃, several models of the ²()F() were studied looking for a better agreement with experimental data. The best fit is achieved with a simple constant scaling (C = 1.25) of the Shirai's spectra. The functional derivative of the deviation function D(t) with respect to changes in ²()F() is also calculated.     

The reversion of martensite to austenite in certain stainless steels

An investigation has been made of the reversion of martensite () to austenite () in two stainless steels (i) Fe-16 wt% Cr-12 wt% Ni (of low interstitial content) (ii) Fe-15 wt% Cr-8 1/2 wt% Ni-2 wt% Mo-0.09 wt% C. The alloys were refrigerated to produce 12 to 15% martensite () and then heated for short times at various temperatures ranging from below A _s to above A _f. With rapid heating the reversion of to occurs largely by a shear mechanism. In the Fe-16Cr-12Ni alloy individual grains of transform to grains of reversed of similar size and shape. In the carbon-containing alloy there is evidence of break-up of the grains on reversion. An increase in the strength results from reversion and this is attributable mainly to the high dislocation density of the reversed .     

The age hardening effect in Ti-6 Al-4 V due to ω and α precipitation in the β grains

The structure at room temperature of a quenched TA6V titanium alloy has been investigated. This structure is + or + according to the treatment temperature; it is always metastable. During ageing the grains decomposed by the reaction + + +; this decomposition was accompanied by a large increase of the 0.2% yield stress. No structural modification was observed in. The and phase of TA6V were separately investigated in the form of single-phase alloys. The hardness of was insensitive to ageing, while was considerably hardened by and; we deduced that the strengthening of the minor phase during ageing is mainly responsible for the hardening of TA6V.     

Phase transformations in permanent-mould-cast aluminium bronze

The phases obtained in aluminium bronze (Cu-10Al-4Fe) cast into a permanent mould were investigated. The parameters examined were the pre-heating temperature of the mould and the graphite coating thickness. The phases and ₂ were detected as well as the metastable phases and . The intermetallics of the system Fe-Al were obtained in various stoichiometric compositions. The different cooling rates of the casting resulted in two mechanisms of transformation to grains out of the unstable phase, one being nucleation and growth producing needle-shaped grains, the other exhibiting a massive transformation to spherical grains. These two mechanisms determine the changes in the size of the a grains as result of changes in the cooling rate in its various ranges.     

Intensity of critical opalescence of helium-4

We present measurements of the critical opalescence of helium-4. The results are analyzed by the Einstein and Ornstein-Zernike theory and the power laws. We obtain ==1.17±0.02, ==0.62±0.1,/=4.5±0.3,P _c =1706.008 mm Hg, andT _c =5,189.863 mK (T ₅₈ ). The critical behavior of helium-4 is almost the same as that of classical fluids and the influence of the quantum nature of helium-4 is not as evident as has been claimed.     

Relationship between the energy supply parameters and the physicochemical l characteristics of polymer compositions during drying and thermal processing

The effect of the type of energy supply on the formation of temperature and concentration fields in the thermal processing of polymer compositions is considered.Notation T₀, T initial and current temperature of the coating - T_m temperature of the air - =(T-T_o)/(T_m-T₀) dimensionless temperature of the coating - a thermal diffusivity - A absorption power of the coating - D diffusion coefficient - thermal conductivity - c thermal capacity - density - _k convective heat transfer coefficient - i number of moles of reacting groups per unit volume of polymer - K₀ factor in front of the exponential - R gas constant - u concentration - Q thermal effect of the reaction - q_n density of the incident radiant flux - =x/ dimensionless coordinate over the thickness of the coating - Ki=Aq_n /(T_m-T₀) Kirpichev criterion characterizing the thermal effect of the reaction - Ki_p=Qi/c (T_m-T₀) analog of the Predvoditelev criterion, characterizing the rate of occurrence of a chemical excess in the system - Bu= Bouguer criterion - Lu=D/a Lykov number - Fo=a/² Fourier number - Bi= _k Biot number Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 26–33, July, 1980.     

Superconductivity of small metallic particles. I

The ground state energy and orbital magnetic susceptibility of a small-particle superconductor are calculated with the use of perturbation theory, which is expected to give correct results in the limit of small particle size, i.e., when the average one-electron energy level spacing is much larger than the energy gap of the bulk metal. The method is applicable up to particles of intermediate size for which / = 1/4–1/2 (e.g., aluminum particles of radius 25–30 Å). The magnetic susceptibility does not undergo any drastic change in the region ~ when the particle size is varied, and quantum size effects do not show up in the susceptibility.Supported by a Grant-in-aid from the Japanese Ministry of Education.     

The mechanism of continuous dissolution of the lamellar structure in aged Al 22 at% Zn alloy

The mechanism of continuous dissolution was studied using transmission electron microscopy, X-ray diffraction and hardness measurements. The metastable phase was identified in the first stage of dissolution nucleating at the - boundaries. Interface dislocations at the - boundaries forming a perpendicular net in the 110 directions were identified as of screw character and of Burgers vector b=1/2a 110. During dissolution a change of shape of precipitates occurs leading to their fragmentation and to a change of the direction of boundaries into 110 directions.     

Nonlinear axisymmetric response of orthotropic thin truncated conical and spherical caps

Summary An approximate analytical solution of the large deflection axisymmetric response of polar orthotropic thin truncated conical and spherical shallow caps is presented. Donnell type equations are employed. The deflection is approximated by a one term mode shape satisfying the boundary conditions. The Galerkin's method is used to get the governing equation for the deflection at the hole. Nonlinear free vibration response and the response under uniformly distributed static and step function loads are obtained. The effect of various parameters is investigated.Notations A, A ^* Inward and outward amplitudes - a, b, h Base radius, inner radius and thickness of the cap - D M h ³/[12(–v ² )] - E ,E Young's moduli - H ^*,H Apex height, dimensionless apex heght:H ^*/h - N _, Stress resultants - p ^1/2 - q Uniformly distributed load - Q,Q₀ Dimensionless load: , dimensionless step load - Q, Q ₀ Dimensionless load: , step load - t, Time, dimensionless time: t - T _A Ratio of nonlinear periodT for inward amplitudeA and the linear periodT _L - w ^* Normal displacement at middle surface - w Dimensionless displacement:w ^*/h - ₁ Linear parameter of static response - Orthotropic Parameter:E /E - Mass density - ₂,₃ Quadratic and cubic nonlinearity parameters - b/a - v ,v Poisson's ratios - Dimensionless radius:r/a - ^*, Stress function, dimensionless stress function: - ₀ ^* ,₀ Linnear frequency, dimensionless frequency: With 7 Figures     

Martensitic transformations in Ti-Mo alloys

A detailed investigation has been made of the structure of alloys of the Ti-Mo system containing up to 10wt% Mo, water-quenched from the-phase region. With increase in molybdenum content, the martensite structure changes from hexagonal () to orthorhombic () at 4 wt% Mo, and at 10 wt% Mo, the structure is completely retained . For alloy compositions <4 wt% Mo, there is a diffusional component in the transformation of the -phase at the quench rates employed. There is a transition, with increase in molybdenum content, in morphology (from massive to acicular) and in substructure (from dislocations to twins). However, the transitions in crystallography, morphology and sub-structure are not directly related to one another except for an abrupt loss of dislocation substructure at the/ transition. The to crystallographic transition has the characteristics of a second order transformation, and evidence has been obtained of the existence of a spinodal within the metastable orthorhombic system. The orthorhombic martensites of Ti-6 and 8 wt% Mo decompose during quenching producing a fine modulated structure within the martensite plates, consistent with a proposed spinodal mode of decomposition.