共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
针对当前照射制导设备数据传输能力存在的问题,文章提出了一种基于串并收发器技术、传输速率为2.5 Gbit/s的光电通信系统设计。该设计以串并收发器为核心,采用光纤传输与现场可编程门阵列(FPGA)软件结合的方式对网络报文控制数据、状态采样数据和同步时序信号等不同速率和接口形式的数据进行组帧和解帧处理,最终实现了高速光电系统的通信。测试结果表明,该系统大幅提升了阵面数据信息的传输和处理速率,同时降低了传统阵面与地面通信系统的硬件设备数量和繁杂度,突破了阵面与地面间的传输距离限制。 相似文献
3.
通信技术的快速发展已经彻底改变了我们的生活习惯,同时也在深刻影响着煤炭企业的管理模式和生产方式。基于通信技术,文章设计了一种基于光纤传输的数字信号传输的煤矿井下语音通信系统与广播网络系统,系统充分考虑煤矿井下应用环境,采用光纤对数据进行传输,有效提高了系统的传输效率和抗干扰能力,该语音通信系统以STM32为网络对讲模块的主控芯片,用来实现对各个模块的驱动和控制,通过以太网协议的编写与设计实现系统的通信功能。该语音通信系统实现了一对一、多对多、单向扩音广播、双向对讲、录音等功能,做到“一种系统,多种功能”,为煤矿企业节省成本,减小井下通信难度。经实验验证,该系统运行稳定,具有一定的可行性和实用性。通过对系统对讲模块的优化设计,使系统噪声大幅下降。 相似文献
4.
交换(Switching)是按照通信两端传输信息的需要.用人工或设备自动完成的方法,把要传输的信息送到符合要求的相应路由上的技术的统称。广义的交换机(Switch)就是一种在通信系统中完成信息交换功能的设备。它是一种基于MAC地址识别.能够在通信系统中完成信息交换功能的设备。 相似文献
5.
6.
一、系统的提出及功能。目前我国铁路交通中的通信主要通过无线通信设备组成。经调查发现,在目前新建的铁路中,山区铁路占了很大比重。由于在这些特殊的地理环境下,无线信号的传输受到很大干扰,因此,采用有线信号传输是一种比较合理经济的通信方式。 相似文献
7.
为了实现在局域网中进行通信,即时通信系统就是在这种思想和背景下构思的一种基于多种基本应用的局域网应用软件支撑平台。即时通信系统中音频采集功能通过windows自带的功能函数实现,音频压缩功能通过设置缓冲区来实现,音频传输功能通过udp传输协议来实现,视频采集通过自带的视频卡采集来实现,视频压缩通过H.263标准来实现,视频传输通过udp传输协议来实现,文字通信通过调用套接字来实现。实际应用表明,该系统具有操作简便、测试准确的特点,达到了设计要求。 相似文献
8.
9.
10.
11.
12.
This paper describes an analog-to-digital converter which combines multiple delta-sigma modulators in parallel so that time oversampling may be reduced or even eliminated. By doubling the number of Lth-order delta-sigma modulators, the resolution of this architecture is increased by approximately L bits. Thus, the resolution obtained by combining M delta-sigma modulators in parallel with no oversampling is similar to operating the same modulator with an oversampling rate of M. A parallel delta-sigma A/D converter implementation composed of two, four, and eight second-order delta-sigma modulators is described that does not require oversampling. Using this prototype, the design issues of the parallel delta-sigma A/D converter are explored and the theoretical performance with no oversampling and with low oversampling is verified. This architecture shows promise for obtaining high speed and resolution conversion since it retains much of the insensitivity to nonideal circuit behavior characteristic of the individual delta-sigma modulators 相似文献
13.
Yasuo Nagazumi 《Analog Integrated Circuits and Signal Processing》1996,11(2):173-181
In this article, a new multiplication type D/A conversion system using CCD is proposed and the result of simulations for evaluating its performance is reported. The system consists of a recursive charge divider which divides input charge-packet Qin sequentially into output charge-packets Qin · 2-i
and two charge-packet accumulators which accumulates output charge-packets from the recursive divider selectively according to digital input signal bits starting from MSB. The system converts input digital signal bit by bit, fully in charge-domain, thus the power consumption for this system is supposed to be very low. Also in this article, an effective method to achieve higher accuracy for splitting a charge-packet into two equal-sized packets using very simple hard-ware structure is proposed. As the result of simulations, we have found that the upper limit of accuracy for the conversion is determined by transfer efficiency of CCD, and within this range a trade-off relationship exists among conversion-accuracy, circuit-size and conversion-rate. This unique relationship enables to reduce the circuit size of D/A converter significantly maintaining the accuracy of conversion by slowing down the conversion-rate. This D/A converter is appropriate especially for the system integration because of its simple structure, tolerance to the fabrication error and low power consumption inherrent in the nature of CCD. By using of this system, it is expected to be possible to realize a focal plane image processor performing parallel analog operations such as DCT conversion with CCD imager incorporated on the same Si chip by the same MOS process technology. 相似文献
14.
《Solid-State Circuits, IEEE Journal of》1979,14(6):932-937
The design and measured performance of a fully parallel monolithic 8-bit A/D converter is reported. The required comparators and combining logic were designed and fabricated with a standard high-performance triple-diffused technology. A bipolar comparator circuit giving good performance with high input impedance is described. Circuit operation is reported at sample rates up to 30 megasamples per second (MS/s), with analog input signal power at frequencies up to 6 MHz. Full 8-bit linearity was achieved. An SNR of 42-44 dB was observed at input signal frequencies up to 5.3 MHz. 相似文献
15.
16.
17.
《Solid-State Circuits, IEEE Journal of》1977,12(6):662-673
The quest for a minimum-parts-count DPM led to the development of this monolithic, low power analog-to-digital converter. It incorporates the analog and digital functions historically implemented separately with specialized process technologies into a chip with full /spl plusmn/3 digit accuracy. The integration of resistors, compensation capacitors, and an oscillator reduces the external component complement to three capacitors and one adjustable reference. TTL compatible outputs include sign, overrange, and under range information in addition to the three digit strobes and the BCD data outputs. The logic operates between +5 V and ground, the linear section between +5 V and -5 V. The paper describes the conversion algorithm and its CMOS implementation, emphasizing the analog design of this innovative device. 相似文献
18.
It is often necessary to approximate the probability density function of a random variable from given statistical moments. The Gram-Charlier Type A series is one well known method for such representations. In this note, the Gram-Charlier Type A series is generalized to the multidimensional case. 相似文献
19.
刘琪 《智能计算机与应用》2013,(6):85-87
在能够自动识别视频中的说话者的系统中,大部分采用的是声音和唇部运动相结合的方法。文中则采用了另一种方法有效地达到了目的,即通过检测人体头部和手部的运动来鉴别说话者。基于演讲者在说话时通常会伴有头部运动或是手部运动,该方法既能实现说话者的检测,又能避免由于观测点过远而导致无法判断人唇部运动的局限性。在系统的实施过程中,运用了多种图像处理方法,并且对三帧差运动法做出了改善,使其能更高效、更准确地检测到头部和手部的运动。经过多个不同的视频测试后,本系统的F1 score高达91.91%,从而验证了该系统的可行性。 相似文献