共查询到20条相似文献,搜索用时 46 毫秒
1.
程勇 《工业仪表与自动化装置》2011,(5):85-86,90
半导体制冷片又叫热电制冷片,可应用在一些空间非常小的环境,没有化学制冷剂,对环境无污染.该文提出了利用51单片机控制半导体热电制冷片,实现车载保温箱进行加热制冷的硬件电路和软件设计原理.硬件电路主要由输入输出、温度采集和反馈、控制电路组成,控制算法主要采用了滞环控制策略.整个系统结构简单,运行可靠. 相似文献
2.
3.
《仪表技术与传感器》2017,(1)
以TMS320F28335处理器为控制核心设计了一个恒温控制系统,该系统由温度测量与采集、半导体制冷片驱动、显示和存储等模块组成。采用高精度测温仪采集温度数据,温度偏差经过PID算法处理控制程控电源输出直流电流来调节半导体制冷片的制冷量,实现恒温箱的温度控制。实验结果表明:设定值为20℃时,系统的过渡过程小于2 h,稳态时温度波动小于0.03℃。该系统可被用来控制恒温箱,且具有能耗小、体积小、易搬运、成本低、操作方便等优点。 相似文献
4.
半导体制冷具有加热制冷双向工作、无震动、无噪音、可靠性高、安装容易、热惯性小等特点。文中的系统是集半导体制冷片、高精度温度检测、可控硅移相控制和PID自动控制理论等几部分相结合构成的高精度温控系统。系统经实验数据验证控温精度可达0.1℃,该系统具有很好的应用前景。 相似文献
5.
6.
张香林 《机械工程与自动化》2018,(4)
依据半导体制冷芯片工作特性曲线可知,其最大制冷量和最高制冷效率所对应的工作电流不一致,而目前半导体制冷芯片均以一个恒定电流而工作,所以不可能使其一直处于最佳工作状态。为了提升半导体制冷性能,设计出一种模糊控制系统,该系统根据半导体制冷片冷热端面的温度情况,自动调节制冷芯片的电流,使其始终处于最佳工作状态。实践证明:该系统不仅能提升半导体制冷性能,还能对半导体热功耗进行有效管理,提高半导体制冷器的使用寿命。 相似文献
7.
8.
9.
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
14.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
15.
16.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
17.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
18.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献