High‐Performance,Solution‐Processed,and Insulating‐Layer‐Free Light‐Emitting Diodes Based on Colloidal Quantum Dots

Quantum‐dot light‐emitting diodes (QLEDs) may combine superior properties of colloidal quantum dots (QDs) and advantages of solution‐based fabrication techniques to realize high‐performance, large‐area, and low‐cost electroluminescence devices. In the state‐of‐the‐art red QLED, an ultrathin insulating layer inserted between the QD layer and the oxide electron‐transporting layer (ETL) is crucial for both optimizing charge balance and preserving the QDs' emissive properties. However, this key insulating layer demands very accurate and precise control over thicknesses at sub‐10 nm level, causing substantial difficulties for industrial production. Here, it is reported that interfacial exciton quenching and charge balance can be independently controlled and optimized, leading to devices with efficiency and lifetime comparable to those of state‐of‐the‐art devices. Suppressing exciton quenching at the ETL–QD interface, which is identified as being obligatory for high‐performance devices, is achieved by adopting Zn_0.9Mg_0.1O nanocrystals, instead of ZnO nanocrystals, as ETLs. Optimizing charge balance is readily addressed by other device engineering approaches, such as controlling the oxide ETL/cathode interface and adjusting the thickness of the oxide ETL. These findings are extended to fabrication of high‐efficiency green QLEDs without ultrathin insulating layers. The work may rationalize the design and fabrication of high‐performance QLEDs without ultrathin insulating layers, representing a step forward to large‐scale production and commercialization.     

Stability of Quantum Dots,Quantum Dot Films,and Quantum Dot Light‐Emitting Diodes for Display Applications

Quantum dots (QDs) are being highlighted in display applications for their excellent optical properties, including tunable bandgaps, narrow emission bandwidth, and high efficiency. However, issues with their stability must be overcome to achieve the next level of development. QDs are utilized in display applications for their photoluminescence (PL) and electroluminescence. The PL characteristics of QDs are applied to display or lighting applications in the form of color‐conversion QD films, and the electroluminescence of QDs is utilized in quantum dot light‐emitting diodes (QLEDs). Studies on the stability of QDs and QD devices in display applications are reviewed herein. QDs can be degraded by oxygen, water, thermal heating, and UV exposure. Various approaches have been developed to protect QDs from degradation by controlling the composition of their shells and ligands. Phosphorescent QDs have been protected by bulky ligands, physical incorporation in polymer matrices, and covalent bonding with polymer matrices. The stability of electroluminescent QLEDs can be enhanced by using inorganic charge transport layers and by improving charge balance. As understanding of the degradation mechanisms of QDs increases and more stable QDs and display devices are developed, QDs are expected to play critical roles in advanced display applications.     

Degradation Mechanisms in Small‐Molecule and Polymer Organic Light‐Emitting Diodes

Degradation in organic light‐emitting diodes (OLEDs) is a complex problem. Depending upon the materials and the device architectures used, the degradation mechanism can be very different. In this Progress Report, using examples in both small molecule and polymer OLEDs, the different degradation mechanisms in two types of devices are examined. Some of the extrinsic and intrinsic degradation mechanisms in OLEDs are reviewed, and recent work on degradation studies of both small‐molecule and polymer OLEDs is presented. For small‐molecule OLEDs, the operational degradation of exemplary fluorescent devices is dominated by chemical transformations in the vicinity of the recombination zone. The accumulation of degradation products results in coupled phenomena of luminance‐efficiency loss and operating‐voltage rise. For polymer OLEDs, it is shown how the charge‐transport and injection properties affect the device lifetime. Further, it is shown how the charge balance is controlled by interlayers at the anode contact, and their effects on the device lifetime are discussed.