共查询到20条相似文献,搜索用时 16 毫秒
1.
《International journal for numerical methods in engineering》2018,113(9):1488-1506
In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method. 相似文献
2.
3.
Standards are the basis for production enterprises to organize production ex-factory inspection trade 《中国标准化(英文版)》2008,25(1):24-25
Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.…… 相似文献
4.
A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa. 相似文献
5.
On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.…… 相似文献
6.
Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß. 相似文献
7.
C. Qihong W. Zhan‐Wen J. Yi J. Yehua L. Fei F. Hanguang 《Materialwissenschaft und Werkstofftechnik》2014,45(7):582-590
In the present study a high‐boron high speed steel (HSS) roll material was designed. Many expensive alloy elements have been substituted by cheap boron alloy, and high‐boron high speed steel roll has been manufactured by centrifugal casting method. The microstructures, mechanical properties and wear resistance of centrifugal casting high‐boron high speed steel roll have been investigated by optical microscopy (OM), scanning electron microscopy (SEM), and X‐ray diffraction (XRD) analysis, hardness test, impact test and wear test. The results indicated that the solidification microstructures of high‐boron high speed steel roll consisted of M2(B,C), (W,Mo)2(B,C), M3(B,C), M23(B,C)6 type borocarbides and martensite, a small amount of retained austenite. Borocarbides were continuously distributed over the grain boundary. After quenching from 1050 °C, local broken network appeared in partial borocarbides, and fine secondary borocarbide precipitated from the matrix. After tempering from 525 °C, the amount of precipitated borocarbide increased significantly. After heat treatment, the hardness of high‐boron high speed steel roll excelled 60 HRC, and its impact toughness excelled 8.0 J/cm2. The single groove steel rolling amount of high‐boron high speed steel rolls increases by 500% than that of bainite cast iron roll, when the rolls are used in K1 mill housing of bar mill. 相似文献
8.
Dimiter Hadjistamov 《材料科学与工程:中英文B版...》2019,(2):56-65
The definition of the thixotropy is a decrease in viscosity with time in shear and a subsequent recovery of viscosity after the shear deformation is removed.We ... 相似文献
9.
Kyo-Hong CHOI Kwon-Koo CHO Gyu-Bong CHO Hyo-Jun AHN Ki-Won KIM Yoo-Young KIM 《材料科学与工程学报》2007,25(6):886-891
Several researches have been reported about the characteristic of β-Ga2O3 nanowires which was synthesized on nickel oxide particle. But indeed, recent researches about synthesis of β-Ga2O3 nanowires on oxide-assisted transition metal are limited to nickel or cobalt oxide catalyst. In this work, Gallium oxide (β-Ga2O3 ) nanowires were synthesized by a simple thermal evaporation method from gallium powder in the range of 700 - 1000℃ using the iron, nickel, copper, cobalt and zinc oxide as a catalyst, respectively. The β-Ga2O3 nanowires with single crystalline without defects were successfully synthesized at the reaction temperature of 850, 900 and 950℃ in all the catalysts. But optimum experimental condition in synthesis of nanowires varied with the kind of catalyst. As increasing synthesis temperature,the morphology of gallium oxide nanowires changed from nanowires to nanorods, and its diameter increased. From these results, we could be proposed that the growth mechanism of β-Ga2O3 nanowires was changed with synthesis temperature of nanowires. Microstructure and morphology of Synthesized nanowire was characterized by HR-TEM, FE-SEM, EDX and XRD. 相似文献
10.
《中国标准化(英文版)》2014,(4)
正Responding to ISO’s appeal for survey for the to-be-developed ISO Strategy Plan for 2016-2020,SAC hosted a special workshop over the needs and comments of various fi elds on June 8 in Beijing.The workshop was attended by ISO President-elect and Ansteel General Manager Zhang Xiaogang,SAC Vice-Administrator Yu Xinli,and 30 experts from 相似文献
11.
《中国标准化(英文版)》2014,(5)
正The review group of Asia Pacific Laboratory Accreditation Cooperation(APLAC)carried out a 4-day peer review of the proficiency testing provider(PTP)for China National Accreditation Service for Conformity Assessment(CNAS)from July 28 to 31,2014.CNAS passed the PTP review with excellent performance.Two senior peer reviewers of APLAC made a comprehensive,rigorous and detailed review of CNAS’s PTP accreditation activities,and made the on-spot inspection of the review groups in Shanghai and Shenzhen respectively. 相似文献
12.
《中国标准化(英文版)》2014,(4)
正China and Greece Sign the Standardization Cooperation Agreement Witnessed by Chinese Premier Li Keqiang and Greek Prime Minister Antonis Samaras,AQSIQ Minister Zhi Shuping and ELOT Chairman and Executive Director Angelos Tolkas signed the SAC-ELOT Standardization Cooperation Agreement.The Agreement is one of the critical cooperation documents signed during Li Keqiang’s visit in Greece,encouraging China and Greece to 相似文献
13.
刘智洋 《中国标准化(英文版)》2014,(4):M0002-M0002
正The Chinese Premier Li Keqiang's recent trip to the UK has reinforced the China-UK comprehensive strategic partnership;just as the British Prime Minister David Cameron put it,"the relationship is gaining in strength,depth and understanding"after a bucket of business deals being inked worth more than 30 billion US dollars.From the first agreement signing in 2004 to the new agreement of mutual standards recognition and adoption in 相似文献
14.
《中国标准化(英文版)》2014,(4):3-3
正A national directory of standards complexes for strategic emerging sectors was recently developed and released jointly by 12governmental departments,namely,SAC,NDRC,MOST,MIIT,MEP,MOA,AQSIQ,State Forest Administration,State Administration of Science and Technology for National Defense,State Oceanic Administration and National Railway Administration. 相似文献
15.
《中国标准化(英文版)》2014,(4)
正Four new national standards on air pollutant emission control offi cially issued by the Ministry of Environment Protection(MEP)together with AQSIQ and SAC has been brought into force from July 1,2014.The Emission standard for air pollutants of coal-burning,oil-burning and gasfi red boilers,which is the strictest emission standard historically,will tackle the stubborn pollution problem of boilers and waste incineration in most of China’s regions. 相似文献
16.
《新型炭材料》2014,(6):460
New Carbon Materials is a bimonthly journal published with the permission of the Ministry of Science and Technology and of the State News and Publication Agency.The journal is sponsored by the Institute of Coal Chemistry,Chinese Academy of Sciences,and is published by Science Press.Aims and Scope 相似文献
17.
《中国标准化(英文版)》2014,(5):3-3
正Recently,National Copyright Administration of China(NCAC)has rewarded 215 organizations and 179 individuals for their outstanding efforts on investigating standards copyright infringement and piracy in 2013.Hua Jianhua,the Deputy-Director of National Standards Copyright Protection Workgroup Office won a third prize of the national individual award.In 2012,SAC set up the national standards copyright protection working group,and developed policies to crack down standards infringement and piracy behaviors and to strengthen standards copyright protection. 相似文献
18.
《中国标准化(英文版)》2014,(5)
正Tian Shihong,the Administrator of SAC,met Dr.Torsten Bahke,the Chairman of the Executive Board of DIN in Beijing on September 3,2014.The two sides made an in-depth discussion of the following issues:the staff exchange and training,international standardization cooperation projects and ISO Strategic Plan(2016-2020),copyright of ISO publications,and principles for adopting international standards,reaching an agreement on advancing the cooperation with ISO and IEC,adopting the policy of international standards,enhancing standards quality as well as publicity and implementation of standards,etc. 相似文献
19.
Cubic boron nitride(c-BN) film was deposited on a Si (100) substrate by the RF-magnetron sputtering.The mainly problems for fabrication of c-BN films are the low purity and high intrinsic compressive stress. In order to solve the two problems, the c-BN film with the buffer interlayer was deposited on the substrate which had been implanted with nitrogen and/or boron ions. The results show: the implantation of nitrogen ions can obviously increase c-BN content and reduce the internal stress slightly; while the implantation of boron shows no obvious improvement to the content of c-BN, which can reduce the internal stress in the film obviously. In addition, it is suggested that the implantation of nitrogen and boron shows the best result, which not only can increase the content of c-BN, but also reduce the internal stress in the c-BN film obviously. 相似文献
20.
Containerless tube extrusion has been investigated with commerically pure titanium at room temperature and a strain rate of 0.07 s-1 using 20 conical dies of five different strains and four different angles with MoS2 lubricant. Theoretical punch pressures have been calculated using appropriate equations from slab analysis of the process and compared with experimentally determined punch pressures. It is found that there exists an optimum angle at which the punch pressure is the least at a given strain. 相似文献