Preparation and Organization of Nanoscale Polyelectrolyte‐Coated Gold Nanoparticles

The layer‐by‐layer (LbL) desposition of oppositely charged polyelectrolytes from adsorption solutions of different ionic strength onto ～7 nm diameter carboxylic acid‐derivatized gold nanoparticles has been studied. The polyelectrolyte‐modified nanoparticles were characterized by UV‐vis spectrophotometry, microelectrophoresis, analytical ultracentrifugation, and transmission electron microscopy. UV‐vis data showed that the peak plasmon absorption wavelength of the gold nanoparticles red‐shifted after each adsorption step, and microelectrophoresis experiments revealed a reversal in the surface charge of the nanoparticles following deposition of each layer. These data are consistent with the formation of polyelectrolyte layers on the nanoparticles. Analytical ultracentrifugation showed an increase in mean nanoparticle diameter on adsorption of the polyelectrolytes, confirming the formation of gold‐core/polyelectrolyte‐shell nanoparticles. Transmission electron microscopy studies showed no signs of aggregation of the polyelectrolyte‐coated nanoparticles. The adsorption of the polyelectrolyte‐coated gold nanoparticles onto oppositely charged planar supports has also been examined. UV‐vis spectrophotometry and atomic force microscopy showed increased amounts of nanoparticles were adsorbed with increasing ionic strength of the nanoparticle dispersions. This allows control of the nanoparticle surface loading by varying the salt content in the nanoparticle dispersions used for adsorption. The LbL strategy used in this work is expected to be applicable to other nanoparticles (e.g., semiconductors, phosphors), thus providing a facile means for their controlled surface modification through polyelectrolyte nanolayering. Such nanoparticles are envisaged to have applications in the biomedical and bioanalytical fields, and to be useful building blocks for the creation of advanced nanoparticle‐based films.     

Evaluation of Digitally Encoded Layer‐by‐layer Coated Microparticles as Cell Carriers

To obtain more biologically relevant data there is a growing interest in the use of living cells for assaying the biological activity of unknown chemical compounds. Density ‘multiplex’ cell‐based assays, where different cell types are mixed in one well and simultaneously investigated upon exposure to a certain compound are beginning to emerge. To be able to identify the cells they should be attached to microscopic carriers that are encoded. This paper investigates how digitally encoded microparticles can be loaded with cells while keeping the digital code in the microcarriers readable. It turns out that coating the surface of the encoded microcarriers with polyelectrolytes using the layer‐by‐layer (LbL) approach provides the microcarriers with a ‘highly functional’ surface. The polyelectrolyte layer allows the growth of the cells, allows the orientation of the cell loaded microcarriers in a magnetic field, and does not hamper the reading of the code. It has further been shown that the cells growing on the polyelectrolyte layer can become transduced by adenoviral particles hosted by the polyelectrolyte layer. It is concluded that the digitally encoded microparticles are promising materials for use in biomedical and pharmaceutical in‐vitro research where cells are used as tools.     

Polyelectrolyte‐Clay‐Protein Layer Films on Microfluidic PDMS Bioreactor Surfaces for Primary Murine Bone Marrow Culture

Poly(dimethylsiloxane) (PDMS) microbioreactors with computerized perfusion controls would be useful for engineering the bone marrow microenvironment. However, previous efforts to grow primary bone marrow cells on PDMS substrates have not been successful due to the weak attachment of cells to the PDMS surface even with adsorption of cell adhesive proteins such as collagen or fibronectin. In this work, modification of the surface of PDMS with biofunctional multilayer coatings is shown to promote marrow cell attachment and spreading. An automated microfluidic perfusion system is used to create multiple types of polyelectrolyte nanoscale coatings simultaneously in multiple channels based on layer‐by‐layer deposition of PDDA (poly(diallyldimethyl ammonium chloride)), clay, type IV collagen and fibronectin. Adherent primary bone marrow cells attached and spread best on a surface with composition of (PDDA/clay)₅ (Collagen/Fibronectin)₂ with negatively charged fibronectin exposed on the top, remaining well spread and proliferating for at least two weeks. Compared to traditional more macroscopic layer‐by‐layer methods, this microfluidic nanocomposite process has advantages of greater flow control, automatic processing, multiplexed fabrication, and use of lesser amounts of polymers and protein solutions.     

Room‐Temperature Metallic Fusion‐Induced Layer‐by‐Layer Assembly for Highly Flexible Electrode Applications

To fabricate flexible electrodes, conventional silver (Ag) nanomaterials have been deposited onto flexible substrates, but the formed electrodes display limited electrical conductivity due to residual bulky organic ligands, and thus postsintering processes are required to improve the electrical conductivity. Herein, an entirely different approach is introduced to produce highly flexible electrodes with bulk metal–like electrical conductivity: the room‐temperature metallic fusion of multilayered silver nanoparticles (NPs). Synthesized tetraoctylammonium thiosulfate (TOAS)‐stabilized Ag NPs are deposited onto flexible substrates by layer‐by‐layer assembly involving a perfect ligand‐exchange reaction between bulky TOAS ligands and small tris(2‐aminoethyl)amine linkers. The introduced small linkers substantially reduce the separation distance between neighboring Ag NPs. This shortened interparticle distance, combined with the low cohesive energy of Ag NPs, strongly induces metallic fusion between the close‐packed Ag NPs at room temperature without additional treatments, resulting in a high electrical conductivity of ≈1.60 × 10⁵ S cm^?1 (bulk Ag: ≈6.30 × 10⁵ S cm^?1). Furthermore, depositing the TOAS–Ag NPs onto cellulose papers through this approach can convert the insulating substrates into highly flexible and conductive papers that can be used as 3D current collectors for energy‐storage devices.     

Modulating Charge Separation Efficiency of Water Oxidation Photoanodes with Polyelectrolyte‐Assembled Interfacial Dipole Layers

The charge separation efficiency of water oxidation photoanodes is modulated by depositing polyelectrolyte multilayers on their surface using layer‐by‐layer (LbL) assembly. The deposition of the polyelectrolyte multilayers of cationic poly(diallyldimethylammonium chloride) and anionic poly(styrene sulfonate) induces the formation of interfacial dipole layers on the surface of Fe₂O₃ and TiO₂ photoanodes. The charge separation efficiency is modulated by tuning their magnitude and direction, which in turn can be achieved by controlling the number of bilayers and type of terminal polyelectrolytes, respectively. Specifically, the multilayers terminated with anionic poly(styrene sulfonate) exhibit a higher charge separation efficiency than those with cationic counterparts. Furthermore, the deposition of water oxidation molecular catalysts on top of interfacial dipole layers enables more efficient photoelectrochemical water oxidation. The approach exploiting the polyelectrolyte multilayers for improving the charge separation efficiency is effective regardless of pH and types of photoelectrodes. Considering the versatility of the LbL assembly, it is anticipated that this study will provide insights for the design and fabrication of efficient photoelectrodes.     

Layer‐by‐Layer Fabrication and Characterization of Gold‐Nanoparticle/Myoglobin Nanocomposite Films

Multilayer thin films of ～ 7 nm diameter gold nanoparticles (GNPs) linked with horse heart myoglobin (Mb) are fabricated, for the first time, by layer‐by‐layer (LbL) assembly on glass slides, and silicon and plastic substrates. The GNP/Mb nanocomposite films show sharp surface plasmon resonance (SPR) absorption bands that are used to follow the LbL growth of the film and to determine the kinetics of GNP adsorption on the Mb‐modified surface. The GNP/Mb nanocomposite films are characterized using atomic force microscopy, transmission electron microscopy, polarized UV‐vis spectroscopy, and spectroscopic ellipsometry. The GNPs in the multilayer films are spatially separated from one another, and interparticle interactions remain in the film, making it optically anisotropic. The GNP/Mb nanocomposite films are stable in air at temperatures up to 100 °C, and can withstand successive immersions in strongly acidic and basic solutions. The SPR absorption band of the GNP/Mb nanocomposite film in air exhibits a red‐shift in the wavelength maximum and an increase in the maximum absorbance relative to that in water. This result, which is in contrast to that observed with a GNP monolayer on an aminosilane‐functionalized substrate, suggests the shrinkage in air and swelling in water of Mb molecules embedded in the nanocomposite film.     

Pyridylamino‐β‐cyclodextrin as a Molecular Chaperone for Lipopolysaccharide Embedded in a Multilayered Polyelectrolyte Architecture

Layer‐by‐layer self‐assembled polyelectrolyte films containing a charged cyclodextrin and lipopolysaccharide (LPS) are developed for the first time as a potential model for local endotoxin antagonist delivery. We have examined the biological activity of a lipopolysaccharide from E. coli incorporated into multilayered architectures made of poly‐(L ‐lysine) and poly‐(L ‐glutamic acid). Used in such build‐ups, a polycationic cyclodextrin, heptakis(6‐deoxy‐6‐pyridylamino)‐β‐cyclodextrin showed molecular chaperone properties by enabling restoration of the LPS biological activity whenever lost upon interaction with poly‐(L ‐lysine).     

Self‐Healing Actuating Adhesive Based on Polyelectrolyte Multilayers

Creating actuators capable of mechanical motion in response to external stimuli is a key for design and preparation of smart materials. The lifetime of such materials is limited by their eventual wear. Here, self‐healable and adhesive actuating materials are demonstrated by taking advantage of the solvent responsive of weak polyelectrolyte multilayers consisting of branched poly(ethylenimine)/poly(acrylic acid) (BPEI/PAA). BPEI/PAA multilayers are dehydrated and contract upon contact with organic solvent and become sticky when wetted with water. By constructing an asymmetric heterostructure consisting of a responsive BPEI/PAA multilayer block and a nonresponsive component through either layer‐by‐layer assembly or the paste‐to‐curl process, smart films that actuate upon exposure to alcohol are realized. The curl degree, defined as degrees from horizontal that the actuated material reaches, can be as high as ≈228.9°. With evaporation of the ethanol, the curled film returns to its initial state, and water triggers fast self‐healing extends the actuator's lifetime. Meanwhile, the adhesive nature of the wet material allows it to be attached to various substrates for possible combination with hydrophobic functional surfaces and/or applications in biological environments. This self‐healable adhesive for controlled fast actuation represents a considerable advance in polyelectrolyte multilayers for design and fabrication of robust smart advanced materials.     

Inwards Interweaving of Polymeric Layers within Hydrogels: Assembly of Spherical Multi‐Shells with Discrete Porosity Differences

The unique inwards interweaving morphology of polyamines and polyacids within agarose hydrogels that leads to the formation of striated shells with different porosities within the spherical scaffold is reported. Microcompartments with sophisticated structures are commonly used in drug delivery, tissue engineering, and other biomedical applications. However, a method capable of producing well‐defined, multiporous shells within a single compartment is still lacking. By the alternating deposition of polyallylamine (PA) and polystyrenesulfonic acid (PSS) in 1‐butanol, at equal mass ratios, multiple levels of porosity are generated within an agarose microsphere. Each level of porosity is represented by a well‐defined, concentric shell of interweaving PA and PSS layers. The number, thickness, and porosity of the striated shells can be easily controlled by varying the number of PA/PSS bilayers and the polymer concentration, respectively. The feasibility of utilizing this morphology for the assembly of a multi‐shell porous spherical scaffold is validated by trapping different molecular weight dextrans within different regions of porosity. The unique interaction of polyacids and polyamines in hydrogels represents a facile and inexpensive approach to the development of intricate scaffold architectures.     

Pseudobilayer Vesicle Formation via Layer‐by‐Layer Assembly of Hydrophobically Modified Polymers on Sacrificial Substrates

A bilayer of a hydrophobically modified polyelectrolyte, octadecyl poly(acrylamide) (PAAm), sandwiched between the layers of a hydrophilic polyelectrolyte, poly(ethyleneimine) (PEI), is prepared by the sequential electrostatic–hydrophobic–electrostatic‐interaction‐driven self‐assembly on planar and colloid substrates. This process results in a PEI/[PAAm]₂/PEI‐multilayer‐coated substrate. The removal of a PAA/PEI/[PAAm]₂/PEI‐multilayer‐coated decomposable colloidal template produces hollow capsules. Irregular hydrophobic domains of the [PAAm]₂ bilayer in the PEI/[PAAm]₂/PEI‐multilayer capsule are infiltrated with a lipid to obtain a uniform, distinct hydrophobic layer, imparting the capsule with a pseudobilayer vesicle structure.     

Fabrication of a “Soft” Membrane Electrode Assembly Using Layer‐by‐Layer Technology

A new type of thin‐film electrode that does not utilize conducting polymers or traditional metal or chemical vapor deposition methods has been developed to create ultrathin flexible electrodes for fuel cells. Using the layer‐by‐layer (LbL) technique, carbon–polymer electrodes have been assembled from polyelectrolytes and stable carbon colloidal dispersions. Thin‐film LbL polyelectrolyte–carbon electrodes (LPCEs) have been successfully assembled atop both metallic and non‐metallic, porous and non‐porous substrates. These electrodes exhibit high electronic conductivities of 2–4 S cm^–1, and their porous structure provides ionic conductivities in the range of 10^–4 to 10^–3 S cm^–1. The electrodes show remarkable stability towards oxidizing, acidic, or delaminating basic solutions. In particular, an LPCE consisting of poly(diallyldimethyl ammonium chloride)/poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid)/carbon–platinum assembled on a porous stainless steel support yields an open‐circuit potential similar to that of a pure platinum electrode. With LbL carbon–polymer electrodes, the membrane‐electrode assembly (MEA) in a fuel cell can be made several times thinner, assume multiple geometries, and hence be more compact. The mechanism for LPCE deposition, electrode structure, and miniaturization will be presented and discussed, and demonstrations of the LbL electrodes in a traditional Nafion‐based proton fuel cell and the first demonstration of a thin‐film hydrogen–air “soft” fuel cell fully constructed using multilayer assembly are described.     

Selective Ion Transport and Complexation in Layer‐by‐Layer Assemblies of p‐Sulfonato‐ calix[n]arenes and Cationic Polyelectrolytes

The first study of ion transport across self‐assembled multilayered films of p‐sulfonato‐calix[n]arenes and poly(vinyl amine) (PVA) is presented. The films are prepared by the alternate electrostatic layer‐by‐layer assembly of the anionic calixarenes and cationic PVA on porous polyacrylonitrile (PAN) supports. We use tetra‐p‐sulfonato‐calix[4]arene (calix4), hexa‐p‐sulfonato‐calix[6]arene (calix6), and octa‐p‐sulfonato‐calix[8]arene (calix8) as the calixarenes. Ultraviolet (UV) studies indicate that dipping solutions of pH 6.8, without a supporting electrolyte, are most suited for film preparation. Calix8 is adsorbed in higher concentrations per layer than calix6 or calix4, probably because desorption is less pronounced. The permeation rates, P_Rs, of monovalent alkali‐metal chlorides (Li, Na, K, Cs), magnesium chloride, divalent transition‐metal chlorides (Ni, Cu, Zn), trivalent lanthanide chlorides (La, Ce, Pr, Sm), and sodium sulfate across the calix4/PVA, calix6/PVA, and calix8/PVA membranes are studied and compared with the corresponding P_R values across a poly(styrene sulfonate) (PSS)/PVA multilayer membrane prepared under the same conditions. The P_R values of the alkali‐metal salts are between 4 and 17 × 10^–6 cm s^–1, those of magnesium chloride and the transition‐metal salts are 0.2–1.3 × 10^–6 cm s^–1, and those of the lanthanide salts are about 0.1 × 10^–6 cm s^–1. Possible origins for the large differences are discussed. Ion transport is first of all controlled by electrostatic effects such as Donnan rejection of di‐ and trivalent ions in the membrane, but metal‐ion complexation with the calixarene derivatives also plays a role. Complexation occurs especially between Li⁺ or Na⁺ and calix4, Mg²⁺, or Cu²⁺ and calix6, Cu²⁺, Zn²⁺, or the lanthanide ions and calix8. Divalent sulfate ions are found to replace the calixarene polyanions in the membrane. UV studies of the permeate solutions indicate that calix4 especially is displaced during sulfate permeation.     

Networked Gold‐Nanoparticle Coatings on Polyethylene: Charge Transport and Strain Sensitivity

Networked films, comprising gold nanoparticles (ca. 4 nm core diameter) and 1,9‐nonanedithiol, are deposited onto oxidized low‐density polyethylene (LDPE) substrates via layer‐by‐layer self‐assembly. Scanning electron microscopy and transmission electron microscopy images reveal a compact coating with a granular, nanoscale morphology. Conductance measurements at variable temperature are consistent with an Arrhenius‐type activation of charge transport (activation energy: 52 meV). The excellent mechanical robustness of the coatings allows for studying their potential application as strain gauges. Expanding the films by up to 3% is accompanied by a reversible and approximately linear increase in resistance of up to approximately 50% (gauge factor ca. 17). Analyzing the results with an activated tunneling model suggests that the average increase in interparticle distances is significantly smaller than the geometric expansion at the substrate surface.     

Highly Reproducible Surface‐Enhanced Raman Scattering on a Capillarity‐Assisted Gold Nanoparticle Assembly

A facile method based on capillarity‐assisted assembly is used to fabricate high‐performance surface‐enhanced Raman scattering (SERS) substrates employing clean Au nanoparticles (NPs). This method is better than micro‐channel way because the former may supply large‐area uniform assembly and overcome the uneven radial distribution. Such densely‐arranged assembly of Au NPs exhibits high reproducibility and large Raman enhancement factors of 3 × 10¹⁰, arising from strong electromagnetic field coupling induced by adjacent Au NPs. The spot‐to‐spot SERS signals show that the relative standard deviation (RSD) in the intensity of the main Raman vibration modes (1310, 1361, 1509, 1650 cm^?1) of Rhodamine 6G at a concentration of 1 × 10^?10 M are consistently less than 20%, demonstrating good spatial uniformity and reproducibility. The SERS signals of sudan dye at a 1 × 10^?8 M concentration also shows high reproducibility with a low RSD of <20%. Further, the assembly substrate is stable, retaining excellent uniformity and sensitivity after storage for months. This assembly strategy integrating the advantages of low‐cost production, high sensitivity, and reproducibility would significantly facilitate practical SERS detection.     

Enhanced Electrochromism with Rapid Growth Layer‐by‐Layer Assembly of Polyelectrolyte Complexes

In this work, a facile method to deposit fast growing electrochromic multilayer films with enhanced electrochemical properties using layer‐by‐layer (LbL) self‐assembly of complex polyelectrolyte is demonstrated. Two linear polymers, poly(acrylic acid) (PAA) and polyethylenimine (PEI), are used to formulate stable complexes under specific pH to prepare polyaniline (PANI)/PAA‐PEI multilayer films via LbL deposition. By introducing polymeric complexes as building blocks, [PANI/PAA‐PEI]_n films grow much faster compared with [PANI/PAA]_n films, which are deposited under the same condition. Unlike the compact [PANI/PAA]_n films, [PANI/PAA‐PEI]_n films exhibit porous structure that is beneficial to the electrochemical process and leads to improved electrochromic properties. An enhanced optical modulation of 30% is achieved with [PANI/PAA‐PEI]₃₀ films at 630 nm compared with the lower optical modulation of 11% measured from [PANI/PAA]₃₀ films. The switching time of [PANI/PAA‐PEI]₃₀ films is only half of that of [PANI/PAA]₃₀ films, which indicates a faster redox process. Utilizing polyelectrolyte complexes as building blocks is a promising approach to prepare fast growing LbL films for high performance electrochemical device applications.