Arsenic(III) oxidation by iron(VI) (ferrate) and subsequent removal of arsenic(V) by iron(III) coagulation

We investigated the stoichiometry, kinetics, and mechanism of arsenite [As(III)] oxidation by ferrate [Fe(VI)] and performed arsenic removal tests using Fe(VI) as both an oxidant and a coagulant. As(III) was oxidized to As(V) (arsenate) by Fe(VI), with a stoichiometry of 3:2 [As(III):Fe(VI)]. Kinetic studies showed that the reaction of As(III) with Fe(VI) was first-order with respect to both reactants, and its observed second-order rate constant at 25 degrees C decreased nonlinearly from (3.54 +/- 0.24) x 10(5) to (1.23 +/- 0.01) x 10(3) M(-1) s(-1) with an increase of pH from 8.4 to 12.9. A reaction mechanism by oxygen transfer has been proposed for the oxidation of As(III) by Fe(VI). Arsenic removal tests with river water showed that, with minimum 2.0 mg L(-1) Fe(VI), the arsenic concentration can be lowered from an initial 517 to below 50 microg L(-1), which is the regulation level for As in Bangladesh. From this result, Fe(VI) was demonstrated to be very effective in the removal of arsenic species from water at a relatively low dose level (2.0 mg L(-1)). In addition, the combined use of a small amount of Fe(VI) (below 0.5 mg L(-1)) and Fe(III) as a major coagulant was found to be a practical and effective method for arsenic removal.     

Iron(VI) and iron(V) oxidation of copper(I) cyanide

Copper(Il) cyanide (Cu(CN)4(3-)) in the gold mine industry presentsthe biggest concern in cyanide management because it is much more stable than free cyanide. Cu(CN)4(3-) is highlytoxic to aquatic life; therefore, environmentally friendly techniques are required for the removal of Cu(CN)4(3-) from gold mine effluent. The oxidation of Cu(CN)4(3-) by iron-(VI) (FeVIO4(2-), Fe(VI)) and iron(V) (FeVO4(3-), Fe(V)) was studied using stopped-flow and premix pulse radiolysis techniques. The stoichiometry with Fe(VI) was determined to be 5HFeO(4-) + Cu(CN)4(3-) + 8H2O - > 5Fe(OH)3 + Cu2+ + 4CNO- +3/202 + 6OH-. The rate law for the oxidation of Cu(CN)4(3-) by Fe(VI) was found to be first-order with each reactant. The rates decreased with increasing pH and were mostly related to a decrease in concentration of reactive protonated Fe(VI) species, HFeO4-. A mechanism is proposed that agrees with the observed reaction stoichiometry and rate law. The rate constant for the oxidation of Cu(CN)4(3-) by Fe(V) was determined at pH 12.0 as 1.35 +/- 0.02 x 10(7) M(-1) s(-1), which is approximately 3 orders of magnitude larger than Fe(VI). Results indicate that Fe(VI) is highly efficient for removal of cyanides in gold mill effluent.     

Mind the (yield) gap(s)

This paper explores the origin of the notion of ??yield gap?? and its use as a framing device for agricultural policy in sub-Saharan Africa. The argument is that while the yield gap of policy discourse provides a simple and powerful framing device, it is most often used without the discipline or caveats associated with the best examples of its use in crop production ecology and microeconomics. This argument is developed by examining how yield gap is used in a selection of recent and influential agricultural policy documents. The message for policy makers and others is clear: ??mind the (yield) gap(s)??, for they are seldom what they appear.     

Reduction of Tc(VII) by Fe(II) sorbed on Al (hydr)oxides

Under oxic conditions, Tc exists as the soluble, weakly sorbing pertechnetate [TcO4-] anion. The reduced form of technetium, Tc(IV), is stable in anoxic environments and is sparingly soluble as TcO2 x nH2O(s). Here we investigate the heterogeneous reduction of Tc(VII) by Fe(II) adsorbed on Al (hydr)oxides [diaspore (alpha-AlOOH) and corundum (alpha-Al2O3)]. Experiments were performed to study the kinetics of Tc(VII) reduction, examine changes in Fe surface speciation during Tc(VII) reduction (M?ssbauer spectroscopy), and identify the nature of Tc(IV)-containing reaction products (X-ray absorption spectroscopy). We found that Tc(VII) was completely reduced by adsorbed Fe(II) within 11 (diaspore suspension) and 4 days (corundum suspension). M?ssbauer measurements revealed thatthe Fe(II) signal became less intense with Tc(VII) reduction and was accompanied by an increase in the intensity of the Fe(III) doublet and magnetically ordered Fe(III) sextet signals. Tc-EXAFS spectroscopy revealed that the final heterogeneous redox product on corundum was similar to Tc(IV) oxyhydroxide, TcO2 x nH2O.     

Supercritical fluid extraction (SFE) of 4(5)-methylimidazole (4-MeI) and 2-acetyl-4(5)-(1,2,3,4)-tetrahydroxybutyl-imidazole (THI) from ground-coffee with high-performance liquid chromatographic-electrospray mass spectrometric quantification (HPLC/ESI-MS).

Two polar analytes, 4(5)-methylimidazole (4-MeI) and 2-acetyl-4(5)-(1,2,3,4)-tetrahydroxybutyl-imidazole (THI), were extracted with supercritical carbon dioxide (CO2) modified with aqueous methanol. The method was applied to a roasted coffee powder with good recovery rates. Method efficiency was compared with that of solid-phase extraction using SCX Disc cartridges and validated for spiked solid matrix. The analytes were determined using isocratic liquid chromatography-mass spectrometry (LC/MS) on an Atlantis HILIC Silica column (150 x 2.1 mm, 3 microm) with 80% methanol and 20% 0.01 mol l-1 ammonium formate as the mobile phase. The limit of quantification was around 1.5 pg for 4-MeI and 2.0 pg for THI. The linearity of the calibration curves was satisfactory as indicated by correlation coefficients of >0.999. The coefficient of variation for the intra-day and inter-day precisions was <4% (n = 6). Accuracy was in the range 98-101%; recovery rates were > or = 98 and > or = 99% for THI and 4-MeI, respectively. Several samples of Arabica coffee from various locations and commercially available 'off-the-shelf' coffee products (Arabica/Robusta mixtures) were analysed to test the method.     

Reactivity of Pb(II) at the Mn(III,IV) (oxyhydr)oxide--water interface

In this study, the reactivity of lead (Pb(II)) on naturally occurring Mn(III,IV) (oxyhydr)oxide minerals was evaluated using kinetic, thermodynamic, and spectroscopic investigations. Aqueous Pb(II) was more strongly adsorbed to birnessite (delta-MnO1.7) than to manganite (gamma-MnOOH) under all experimental conditions. The isoteric heat of Pb adsorption (delta HT) or birnessite was 94 kJ mol-1 at a surface loading of 1.1 mmol g-1, and decreased with increasing adsorption density. This indicated that adsorption was an endothermic process and that birnessite possessed heterogeneous sites of reactivity for Pb. X-ray absorption fine structure (XAFS) spectra revealed that Pb was adsorbed as inner-sphere complexes on both birnessite and manganite with no evidence to suggest oxidation as an operative sorption mechanism. Lead appeared to coordinate to vacancy sites in the birnessite layer structure with concurrent release of Mn to solution, which resulted in a greater number of second shell Mn scatterers in Pb-birnessite when compared to Pb-manganite samples. The difference in Pb coordination apparently explained the contrasting desorption behavior between the two Mn minerals. These results have significant implications for Pb partitioning in soil environments containing solid-phase Mn(III,IV) (oxyhydr)oxides.     

Iron(VI) and iron(V) oxidation of thiocyanate

Thiocyanate (SCN-) is used in many industrial processes and is commonly found in industrial and mining waste-waters. The removal of SCN- is required because of its toxic effects. The oxidation of thiocyanate (SCN-) by environmentally friendly oxidants, Fe(VI) and Fe(V), has been studied anaerobically using stopped-flow and premix pulse radiolysis techniques. The stoichiometry with Fe(VI) was determined to be 4HFeO(4-) + SCN(-) + 5H2O-->4Fe(OH)3 + SO4(2-) + CNO(-) + O2 + 2OH-. The rate law for the oxidation of SCN- by Fe(VI) was found to be -d[Fe(VI)]/dt = k11([H+]/([H+] + Ka,HFeO4)) [Fe(VI)][SCN-] where k11 = 2.04 +/- 0.04 x 10(3) M-1 s-1 and pKa,HFeO4 = 7.33. A mechanism is proposed that agrees with the observed reaction stoichiometry and rate law. The rate of oxidation of SCN- by Fe(V) was approximately 3 orders of magnitude faster than Fe(VI). The higher reactivity of Fe(V) with SCN- indicates that oxidations by Fe(VI) may be enhanced in the presence of appropriate one-electron-reducing agents. The results suggest that the effective removal of SCN- can be achieved by Fe(VI) and Fe(V).     

Oxidation of sulfonamide antimicrobials by ferrate(VI) [Fe(VI)O4(2-)

Sulfonamide antimicrobials are used in both human therapy and animal husbandry. Sulfonamides are not readily biodegradable and have been detected in surface water and in secondary wastewater effluents. The chemical oxidation of sulfonamides by an environmentally friendly oxidant, ferrate(VI) (Fe(VI)O4(2-), Fe(VI)), was conducted. The sulfonamides used in the oxidation studies were sulfisoxazole, sulfamethazine, sulfamethizole, sulfadimethoxine, and sulfamethoxazole. Kinetics of the reactions were determined as a function of pH (7.0-9.7) and temperature (15-45 degrees C) by a stopped-flow technique. The rate law for the oxidation of sulfonamides by Fe(VI) is first-order with respect to each reactant. The observed second-order rate constants decreased nonlinearly with an increase in pH and are possibly related to the protonation of Fe(VI) (HFeO4- <==> H+ + FeO4(2-); pK(a,HFeO4) = 7.23) and sulfonamides (SH <==> H+ + S-; pK(a,SH) = 5.0-7.4). The activation parameters of the reactions vary with pH due to temperature dependence on the protonation of Fe(VI) and sulfonamides. These results were used to obtain enthalpy of dissociation of sulfonamides. Stoichiometry and products of sulfamethoxazole (SMX) reactions with Fe(VI) were studied in detail using various analytical techniques to evaluate the effect of the oxidation process on the fate of sulfonamides in water. At a stoichiometric ratio of 4:1 (Fe(VI): SMX), complete removal of SMX was achieved. Analyses of oxidation products of the reaction as well as kinetic measurements of substructural models of SMX suggest that the attack of Fe(VI) occurs at the isoxazole moiety as well as at the aniline moiety with minimal preference. The results of the studies reported suggest that Fe(VI) has the potential to serve as a chemical oxidant for removing sulfonamides and converting them to relatively less toxic byproducts in water.     

Uranium(VI) reduction by iron(II) monosulfide mackinawite

Reaction of aqueous uranium(VI) with iron(II) monosulfide mackinawite in an O(2) and CO(2) free model system was studied by batch uptake measurements, equilibrium modeling, and L(III) edge U X-ray absorption spectroscopy (XAS). Batch uptake measurements showed that U(VI) removal was almost complete over the wide pH range between 5 and 11 at the initial U(VI) concentration of 5 × 10(-5) M. Extraction by a carbonate/bicarbonate solution indicated that most of the U(VI) removed from solution was reduced to nonextractable U(IV). Equilibrium modeling using Visual MINTEQ suggested that U was in equilibrium with uraninite under the experimental conditions. X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy showed that the U(IV) phase associated with mackinawite was uraninite. Oxidation experiments with dissolved O(2) were performed by injecting air into the sealed reaction bottles containing mackinawite samples reacted with U(VI). Dissolved U measurement and XAS confirmed that the uraninite formed from the U(VI) reduction by mackinawite did not oxidize or dissolve under the experimental conditions. This study shows that redox reactions between U(VI) and mackinawite may occur to a significant extent, implying an important role of the ferrous sulfide mineral in the redox cycling of U under sulfate reducing conditions. This study also shows that the presence of mackinawite protects uraninite from oxidation by dissolved O(2). The findings of this study suggest that uraninite formation by abiotic reduction by the iron sulfide mineral under low temperature conditions is an important process in the redistribution and sequestration of U in the subsurface environments at U contaminated sites.     

The persistence of infectious adenovirus (type 35) in mussels (Mytilus edulis) and oysters (Ostrea edulis)

Microbiological analyses of fruits and vegetables produced by farms in Minnesota and Wisconsin were conducted to determine the prevalence of Escherichia coli in pre-harvest fruits and vegetables. During the 2003 and 2004 harvest seasons, 14 organic (certified by accredited organic agencies), 30 semi-organic (used organic practices but not certified) and 19 conventional farms were sampled to analyze 2029 pre-harvest produce samples (473 organic, 911 semi-organic, 645 conventional). Before each harvest season, a farmer survey was conducted to collect relevant information on farm management practices that might affect the risk of E. coli contamination in fresh produce. The use of animal wastes for fertilization of produce plants increased the risk of E. coli contamination in organic (OR = 13.2, 95% CI = 2.2–61.2, P-value < 0.0001) and semi-organic (OR = 12.9, 95% CI = 2.9–56.3, P-value < 0.0001) produce significantly. Improper ageing of untreated animal manure significantly increased this risk in organic produce (OR = 4.2 95% CI = 1.7–12.3, P-value = 0.005) grown using such manure as a fertilizer. Organic growers who used cattle manure for fertilization of their crops showed significantly greater risk of contamination with the E. coli (OR = 7.4, 95% CI = 1.6–36.8, P-value = 0.003), compared to those who used other types of manure-based fertilizer. In Minnesota, organic and semi-organic produce collected from the southeastern (SE) part of the state were at a significantly greater risk of E. coli contamination (OR = 3.45, 95% CI = 1.8–35.2, P = 0.008), compared to those collected from farms located in the southern (S) regions of the state. In Wisconsin, organic and semi-organic produce collected from the southern (S) cluster of farms were at approximately 3-times greater risk of E. coli contamination (OR = 2.67, 95% CI = 1.3–9.4, P = 0.004), compared to those grown in the northern (N) cluster of farms.     

Mitteldichte Faserplatten (MDF) aus gebrauchten Oriented Strandboard (OSB)

Zusammenfassung Die Ergebnisse zeigen, dass durch den alkalischen Aufschluss von Oriented Strand Boards (OSB), die in den Mittelschichten PMDI und in den Deckschichen MUPF als Bindemittel enthalten, Fasern gewonnen werden, die bei der MDF-Herstellung zur Verringerung der Dickenquellung und zur Erhöhung der Querzugfestigkeit führen. Die Biegefestigkeit der MDF nahm bei Zusatz von 25% OSB-Recyclingfasern kaum ab. Erst bei einer Ersatzmenge von 50% verringerte sich die Biegefestigkeit von ca. 60 N/mm² auf rund 50 N/mm².

---

Medium density fibre boards (MDF) from recovered oriented strand boards (OSB)

Fibres for medium density fibre boards (MDF) were made from oriented strand boards (OSB) bonded with PMDI in the core and MUPF in the surface. Chips from OSB were pulped with sodium hydroxide. The fibres obtained therefrom were used for partial substitution of fresh fibres in MDF. The preliminary results reveal that recycled fibres decrease the thickness swelling enormously and has also a remarkable positive effect on the internal bond strength as well. However, the use of higher amounts (50%) of recycled fibres negatively impacts the bending strength.

     

Metal speciation dynamics and bioavailability: Zn(II) and Cd(II) uptake by mussel (Mytilus edulis) and carp (Cyprinus carpio)

In the analysis of metal biouptake from complexing environments, both chemical speciation and biological uptake characteristics have to be taken into account. The commonly used free ion activity model is based on equilibrium speciation and implies that diffusion of the bioactive free metal toward the organism is not rate-limiting. In the presence of complexes, however, sufficiently labile species might contribute to the biouptake via preceding dissociation. Coupling of the ensuing diffusional mass transfer flux of metal with the biouptake flux of free metal, the supposedly bioactive species, shows under which conditions labile metal complexes can contribute to the uptake. The goal of the present paper is to apply this type of analysis to experimental data on metal uptake by mussel (Mytilus edulis) and carp (Cyprinus carpio) in complexing environments. These biosystems have fairly well-characterized uptake parameters, but the uptake fluxes cannot be fully explained by considering equilibrium speciation only. For Zn(II) uptake by mussel, evidence was found for diffusional limitation at low concentrations, whereas for Cd(III) uptake by carp, diffusion is not limiting at all. The analysis provides an example of how a more comprehensive treatment of complex systems can be applied to real experimental data.     

Formation of layered Fe(II)-Al(III)-hydroxides during reaction of Fe(II) with aluminum oxide

The reactivity of aqueous Fe(II) with aluminum oxide in anoxic solutions was investigated with batch kinetic experiments combined with Fe K edge X-ray absorption spectroscopy measurements to characterize Fe(II) sorption products. Formation of Fe(II)-Al(III)-layered double hydroxides with an octahedral sheet structure similar to nikischerite (NaFe(II)(6) Al(3)(SO(4))(2)(OH)(18) (H(2)O)(12)) was observed within a few hours during sorption at pH 7.5 and aqueous Fe(II) concentrations of 1-3 mM. These Fe(II) phases are composed of brucite-like Fe(II)(OH)(2) sheets with partial substitution of Al(III) for Fe(II), charge balanced by anions coordinated along the basal planes. Their fast rate of formation suggests that these previously unrecognized Fe(II) phases, which are structurally and compositionally similar to green rust, may be an important sink of Fe(II) in suboxic and anoxic geochemical environments, and impact the fate of structurally compatible trace metals, such as Co(II), Ni(II), and Zn(II), as well as redox-reactive species including Cr(VI) and U(VI). Further studies are required to assess the thermodynamics, formation kinetics, and stability of these Fe(II) minerals under field conditions.     

Formation of lead(IV) oxides from lead(II) compounds

Lead(IV) oxide (PbO(2)) is a corrosion product that can develop on lead pipes used for drinking water supply, and its stability can control lead concentrations in tap water. A set of batch experiments were performed to determine the extent of PbO(2) formation as a function of time, pH, the presence of dissolved inorganic carbon (DIC), and free chlorine concentration. Experiments were conducted with four lead(II) compounds that are precursors of PbO(2) formation: dissolved lead(II) chloride, massicot (β-PbO), cerussite (PbCO(3)), and hydrocerussite (Pb(3)(OH)(2)(CO(3))(2)). While PbO(2) formed in the presence and absence of DIC, the presence of DIC accelerated PbO(2) formation and affected the identity of the PbO(2) (scrutinyite vs plattnerite) product. For some conditions, intermediate solids formed that affected the identity of the PbO(2) produced. When no intermediate solids formed, hydrocerussite led to the formation of pure scrutinyite, and lead(II) chloride and massicot led to mixtures of scrutinyite and plattnerite. Based on the experimental results, a conceptual model of lead(IV) oxide formation pathways was proposed.     

Identification of simultaneous U(VI) sorption complexes and U(IV) nanoprecipitates on the magnetite (111) surface

Sequestration of uranium (U) by magnetite is a potentially important sink for U in natural and contaminated environments. However, molecular-scale controls that favor U(VI) uptake including both adsorption of U(VI) and reduction to U(IV) by magnetite remain poorly understood, in particular, the role of U(VI)-CO(3)-Ca complexes in inhibiting U(VI) reduction. To investigate U uptake pathways on magnetite as a function of U(VI) aqueous speciation, we performed batch sorption experiments on (111) surfaces of natural single crystals under a range of solution conditions (pH 5 and 10; 0.1 mM U(VI); 1 mM NaNO(3); and with or without 0.5 mM CO(3) and 0.1 mM Ca) and characterized surface-associated U using grazing incidence extended X-ray absorption fine structure spectroscopy (GI-EXAFS), grazing incidence X-ray diffraction (GI-XRD), and scanning electron microscopy (SEM). In the absence of both carbonate ([CO(3)](T), denoted here as CO(3)) and calcium (Ca), or in the presence of CO(3) only, coexisting adsorption of U(VI) surface species and reduction to U(IV) occurs at both pH 5 and 10. In the presence of both Ca and CO(3), only U(VI) adsorption (VI) occurs. When U reduction occurs, nanoparticulate UO(2) forms only within and adjacent to surface microtopographic features such as crystal boundaries and cracks. This result suggests that U reduction is limited to defect-rich surface regions. Further, at both pH 5 and 10 in the presence of both CO(3) and Ca, U(VI)-CO(3)-Ca ternary surface species develop and U reduction is inhibited. These findings extend the range of conditions under which U(VI)-CO(3)-Ca complexes inhibit U reduction.     

(Photo)chlorination-Induced Physicochemical Transformation of Aqueous Fullerene nC(60)

This study confirmed the physicochemical transformation of aqueous fullerene aggregates (nC(60)) produced via solvent exchange from toluene by chlorine in the dark and under fluorescent light (representing visible light) by comparing the changes in light absorbance at 700 nm and size distribution of nC(60) and characterizing the photochlorination products of nC(60) by XPS, FTIR and TOF-SIMS techniques. The (photo)chlorination of nC(60) was enhanced by increasing the chlorine dosage and the salinity concentration, and the presence of fluorescent light. During (photo)chlorination, nC(60) underwent surface chlorination, hydroxylation and oxidation, and was transformed into products containing carbon-chlorine, epoxy and hydroxyl functional groups. Extensive (photo)chlorination produced products that might not possess the isolated benzenoid ring structure on their cages, although they retained the 60-carbon cage structure. These findings imply the necessity of assessing the fate and toxicity of nC(60) after (photo)chlorination in both engineered and natural environments and demonstrate a simple way to produce new nC(60) derivatives that contain chlorine and oxygen.     

Nucleophilic substitution of phosphorothionate ester pesticides with bisulfide (HS-) and polysulfides (S(n)2-)

The reactions of five organophosphorus insecticides (OPs) (chlorpyrifos-methyl, parathion-methyl, fenchlorphos, chlorpyrifos, and parathion) with hydrogensulfide/ bisulfide (H2S/HS-) and polysulfides (S(n)2-) were examined in well-defined aqueous solutions over a pH range from 5 to 9. The rates are first-order in the concentration of the different reduced sulfur species. Experiments at 25 degrees C demonstrated that the reaction of the five OPs with the reduced sulfur species follows a SN2 mechanism. The activation parameters of the reaction of OPs with bisulfide were determined from the measured second-order rate constants over a temperature range of 5-60 degrees C. The determined second-order rate constants show that the reaction of an OP with polysulfides is from 15 to 50 times faster than the reaction of the same OP with bisulfide. The dominant transformation products are desalkyl OPs, which indicate that the nucleophilic substitution of reduced sulfur species occurs at the carbon atom of the alkoxy groups. And also the results show that these reduced sulfur species are much better nucleophiles, and thus degrade these pesticides faster than the well-studied base hydrolysis by OH-. When the determined second-order rate constants are multiplied with the concentration of HS- and S(n)2- reported in salt marshes and porewater of sediments, predicted half-lives show that abiotic degradation by sulfide species may be of comparable importance to microbially mediated degradation in anoxic environments.     

Control potential of Anisopteromalus calandrae (Howard) (Hymenoptera: Pteromalidae) against Lasioderma serricorne (F.) (Coleoptera: Anobiidae)

The control potential of Anisopteromalus calandrae (Howard) (Hymenoptera: Pteromalidae) against Lasioderma serricorne (F.) (Coleoptera: Anobiidae) was evaluated in laboratory. The longevity and progeny production of A. calandrae were investigated at 25, 30, and 35 °C. Parasitism preference of A. calandrae to different life stages of L. serricorne was studied at the parasitoid-to-host ratio of 1:15. Effectiveness of A. calandrae against L. serricorne larvae was investigated at different parasitoid-to-host ratios of 1:5, 1:10, 1:15, 1:20, 1:25, 1:30, 1:35, and 1:40 for 24, 48, and 72 h at a photoperiod of 12:12 (L:D) h, 28 ± 2 °C, and 75 ± 5% RH. Effectiveness of A. calandrae against L. serricorne larvae was also evaluated at different volumes (10, 55, 100, 150, 200, 250, 1500, and 2800 ml) of glass vials when the parasitoid-to-host ratio was 1:15. The favorable temperature for survival and progeny production of female A. calandrae was 25 °C. Female A. calandrae could parasitize mature larvae of L. serricorne and produce their offspring during the whole adult stage of the wasp. Female A. calandrae could control 3-, 4-, 5-, and 6-week-old mature larvae and pupae of L. serricorne. Anisopteromalus calandrae offspring only emerged from 6-week-old mature larvae and pupae of L. serricorne. The parasitoid-to-host ratio and space size dramatically affected the parasitism rate of A. calandrae against L. serricorne and the number of A. calandrae offspring. These results suggest that A. calandrae has great potential for controlling L. serricorne infestation.     

Functional Properties of Plasticized Bio-Based Poly(Lactic Acid)_Poly(Hydroxybutyrate) (PLA_PHB) Films for Active Food Packaging

Fully bio-based and biodegradable active films based on poly(lactic acid) (PLA) blended with poly(3-hydroxybutyrate) (PHB) and incorporating lactic acid oligomers (OLA) as plasticizers and carvacrol as active agent were extruded and fully characterized in their functional properties for antimicrobial active packaging. PLA_PHB films showed good barrier to water vapor, while the resistance to oxygen diffusion decreased with the addition of OLA and carvacrol. Their overall migration in aqueous food simulant was determined and no significant changes were observed by the addition of carvacrol and OLA to the PLA_PHB formulations. However, the effect of both additives in fatty food simulant can be considered a positive feature for the potential protection of foodstuff with high fat content. Moreover, the antioxidant and antimicrobial activities of the proposed formulations increased by the presence of carvacrol, with enhanced activity against Staphylococcus aureus if compared to Escherichia coli at short and long incubation times. These results underlined the specific antimicrobial properties of these bio-films suggesting their applicability in active food packaging.     

Microbiological, chemical and sensory assessment of (I) whole ungutted, (II) whole gutted and (III) filleted tilapia (Oreochromis niloticus) during refrigerated storage

The effects of gutting and filleting on microbiological, chemical, and sensory properties of tilapia ( Oreochromis niloticus ) stored under refrigeration were studied. All the tilapia samples were analysed periodically for microbiological (APC), chemical (pH, total volatile basic nitrogen, 2-thiobarbituricacid, K -value), and sensory characteristics. Results indicated that sensory data were in good agreement with microbiological data (APC rejection limit of 10⁷ CFU g⁻¹) and K -value (rejection limit of 60%). Storage life of (I) whole ungutted, (II) whole gutted and (III) filleted tilapia stored under refrigeration (5 ± 1 °C) can be expected to be 12, 10, and 6 days, respectively.