Kinetics of the metal exchange reaction of a Cu(II)-poly(vinyl alcohol) complex with Zn(II)-ethylenediamine-N,N,N′,N′-tetraacetic acid in aqueous solution

The kinetics of the metal exchange reaction between Cu(II)-poly(vinyl alcohol) [Cu(II)-PVA] and Zn(II)-ethylenediamine-N,N,N,N-tetraacetic acid [Zn(II)-EDTA] has been studied by mixing both solutions in a spectrophotometer at pH 10.0 to 11.0, ionic strength =0.10(KNO₃), and 15 to 35°C. The reaction is initiated by the formation of unstable Cu(II)-H-PVA through attack of H⁺ ion on the Cu(II)-PVA complex, and both reactions, ligand exchange and metal exchange, proceed simultaneously. The metal exchange step may be rate determining. The rate equation and rate constants of this reaction were determined as follows: –d[Cu(II)-PVA]/dt=k _0(H)[PVA^–][Cu(II)-PVA] [Zn(II)-EDTA], wherek _0(H)=k ₁+(k₂+k₃)[H⁺],k ₁=5.98±1.64M ^–1 s^–1, andk ₂+k ₃=k₂ K _Cu(II)-H-PVA ^–H +k₃ K _Zn(II)-EDTA ^H =(5.91±0.89)×10⁷ M ^–2 s^–1.     

Synthesis,characterization, thermal constant and relaxation of gadolinium(III), iron(III) and manganese(II) chelates of diethylenetriamine-bis-inositol-N,N′,N″-triacetic acid

The reaction of the bicyclic anhydride of diethylenetraiamine-pentaacetic acid (DTPAA) with inositol gave diethylenetriamine-inositol-biester-N,N^′,N″-triacetic acid (DTPA-BI) (1). (1) was characterized by FAB-MS, ¹HNMR, IR and elemental analysis. Its chelates of Gd(III), Fe(III) and Mn(II) holding promise of magnetic resonance imaging (MRI) were synthesized. Gd(III) complex was obtained from Gd₂O₃ and the acid form of (1). Thermodynamic stability constant and relaxation of Gd(III) complex with DTPA-BI were determined. The spin–lattice relaxivity (R₁=5.6 l mmol⁻¹ s⁻¹) of chelate was slightly larger than that of [GdDTPA]²⁻. The results showed that the complex is a prospective MRI agent, although thermodynamic stability constant of DTPA-BI K_[GdDTPA-BI]⁻=10^18.2 was a little less than that of [GdDTPA]²⁻ (K_[GdDTPA]²⁻=10^20.73).     

Tris(N,N′-dimethylurea)bis(nitrato-O,O′)manganese(II), the first example of a seven-coordinate manganese(II) complex with a monodentate organic ligand

Employing a variety of solvents and molar ratios, the reactions of Mn(NO₃)₂·6H₂O with N,N′-dimethylurea (DMU) afforded the adduct [Mn(NO₃)₂(DMU)₃] (1). X-ray analysis shows that the high-spin complex has a pentagonal bipyramidal geometry with two DMU oxygen atoms in axial positions and with two types of monodentate O-bonding for the DMU molecules, one of them being very unusual. The spectroscopic properties of the prepared complex are also discussed.     

Extraction of Copper(II) with N′,N′-Dialkylhydrazides of Benzoic and Phenylacetic Acids

This article is concerned with the study of the extraction of Cu(II), Co(II), Ni(II), and Zn(II) with N′,N′-dialkylhydrazides of benzoic and phenylacetic acids. The applied reagents are able to extract Cu(II) from ammoniac media efficiently. The influence of the length and structure of alkyl chains on the extraction of Cu(II) has been analyzed. It is shown that N′,N′-dibytil- and N′,N′-dihexylhydrazides of benzoic acid exhibit the most promise for extracting Cu(II) from ammoniac media, and N′,N′-dihexylhydrazide of phenylacetic acid as an extractant is worse than the analogous benzoic acid derivative. Copper stripping has been studied for various concentrations of H₂SO₄, and the copper extraction constants have been calculated. The data obtained indicate that the degree of Cu(II) extraction decreases with increasing concentration of ammonium salts.     

Non-Dispersive Solvent Extraction of Neodymium using N,N,N’,N’-Tetraoctyl Diglycolamide (TODGA)

Hollow fiber contactor was used to study non-dispersive extraction (NDSX) of Nd³⁺ ions from aqueous solutions. N,N,N′,N′-tetraoctyl diglycolamide (TODGA) diluted with n-dodecane was used as the organic phase with di-n-hexyl octanamide (DHOA) as the phase modifier. The role of cations (H⁺/Na⁺) on the transport of Nd³⁺ ions has been investigated for this system. It was observed that H⁺ ion has a significant role to play in the Nd³⁺/TODGA complexation reaction. A mathematical model has also been developed to simulate the NDSX process in a hollow fiber contactor. A comparison has also been made between extraction profiles from the NDSX process and the hollow fiber supported liquid membrane (HFSLM) process. It was observed that NDSX gave comparatively faster rates of extraction in the presence of H⁺ ions but slower in the absence of H⁺ ions.     

Hydrothermal Synthesis of a Nano-sized Mercury(II) N–N–O Donor Coordination Compound

A novel nano-structures mercury(II) coordination compound, [Hg (HPCIH) I₂] (1), (“HPCIH” is the abbreviation of 2-pyridinecarbaldehyde isonicotinoyl hydrazone) has been synthesized by a hydrothermal method that produces the coordination compound at nano size. The new nanostructure was characterized by transmission electron microscopy, scanning electron microscopy, X-ray powder diffraction elemental analysis and IR spectroscopy. Compound 1 was structurally characterized by single crystal X-ray diffraction and the single-crystal structure of this complex shows that each mercury(II) center is five coordinated with two N-donor and one O-donor atoms from “HPCIH” ligand and two iodo anions. Self-assembly of this complexes is realized by CH····I, I····I and π–π stacking interactions. The supramolecular features in these complexes are controlled by weak directional intermolecular interactions.     

Determination of N,N’, N’’-tris(3,7-dimethyloctyl)guanidine (TiDG) in Cesium Extraction Solvent

Several analytical methods were evaluated for determining the concentration of N,N’,N”-tris(3,7-dimethyloctyl)guanidine (TiDG) in a cesium extraction solvent. Of the methods evaluated, non-aqueous titration and ¹H NMR were shown to be successful at quantifying the amount of TiDG present in both a pure solvent extraction system, and a blended system containing an additional base, trioctylamine.     

Extraction of Uranium(VI) and Thorium(IV) from Nitric Acid Solution by N,N,N′,N′ – Tetraoctylglutaricamide

Synthesis and characterization of N,N,N′,N′-tetraoctylglutaricamide (TOGA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time, temperature, and types of diluents) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.0TOGA and Th(NO₃)₄·1.5TOGA. The apparent equilibrium constant of U(VI) and Th(IV) extraction determined are 3.35 ± 0.03 L³/mol³ and 1.87 ± 0.01 L⁵/mol⁵ at 298 ± 1 K. Thermodynamic parameters such as the free energy(ΔG), enthalpy(ΔH), and entropy(ΔS) changes associated with the extraction processes could be evaluated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Effect of functionlization of N,N-dibenzyldithiocarbamate: synthesis,spectral and structural studies on bis(N-benzyl-N-(4-methoxybenzyl)dithiocarbamato-S,S′)zinc(II) and bis(N-benzyl-N-(4-cholrobenzyl)dithiocarbamato-S,S′)cadmium(II) and their use for the preparation of MS (M = Zn,Cd)

Bis(N-benzyl-N-(4-methoxybenzyl)dithiocarbamato-S,S′)zinc(II) (1) and bis(N-benzyl-N-(4-chlorobenzyl)dithiocarbamato-S,S′)cadmium(II) (2) have been prepared and characterized by elemental analysis, IR and NMR (¹H and ¹³C) spectroscopy and single-crystal X-ray analysis. Complexes 1 and 2 exist as monomer and dimer, respectively. Crystal structures of 1 and 2 confirm the presence of four coordinated zinc in a distorted tetrahedral arrangement and five coordinated cadmium in a distorted square pyramid arrangement, respectively. Both the complexes are further stabilized by various interactions such as C–H···S, C–H···N, C–H···O and C–H···π (chelate). C–H···O interaction leads to the formation of dimer in complex 1. In complex 2, C–H···π (chelate) interaction runs in opposite directions which results in the polymeric chain. ZnS and CdS have been prepared from 1 and 2, respectively, and characterized by powder X-ray diffraction, SEM, UV–Vis and fluorescence spectroscopy. The X-ray diffraction pattern confirms the wurtzite phase of as-prepared ZnS and CdS.     

Synthesis and Structure of 1D Copper(II) Polymers with Dissymmetrical N,N′-Bis(substituted)oxamide Ligands: Cytotoxicity and DNA-Binding Property

Two one-dimensional copper(II) coordination polymers with different dissymmetrical N,N′-bis(substituted)oxamide ligands were synthesized, namely {[Cu₂(dmaepox)(dabt)]pic·H₂O}_n (1) and {[Cu₂(dmapob)(dabt)]NO₃·0.6H₂O}_n (2), where H₃dmaepox and H₃dmapob stand for N-(2-carboxylatophenyl)-N′-[3-(methylamino)propyl]oxamidate and N-(2-carboxylatophenyl)-N′-[3-(dimethylamino)propyl]oxamidate, respectively, and dabt is 2?2′-diamino-4?4′-bithiazole. Polymer 1 was characterized by elemental analyses, IR and electronic spectra and single-crystal X-ray diffraction. The crystal structure reveals that polymer 1 consists of many binuclear copper(II) units bridged by cis-oxamide and carboxylate groups. The two copper(II) ions are located in square-planar and square-pyramidal coordination environments, respectively. The separations of the Cu(II) atoms bridged by oxamide and carboxylate groups are 5.2035(7) and 5.1196(7) Å, respectively. The crystal structure of polymer 2 has been reported in our previous paper. However, its relative properties were not studied. In order to compare the influence of different bridging ligands on the cytotoxicities and DNA-binding properties, the cytotoxicities and reactivities towards DNA of polymers 1 and 2 were investigated. The results suggest that the two polymers can interact with herring sperm DNA in the mode of intercalation with binding affinities following the order of 1 > 2, and this is consistent with their in vitro cytotoxicities.     

An aqua-adenine H-bonding interaction controlling the formation of the rare Zn(II)–N9(adenine) bond in crystal structure of diaqua(adenine)(iminodiacetato)zinc(II)

A novel mixed-ligand zinc(II) complex with iminodiacetato(2-) (IDA) and adenine (AdeH) ligands has been obtained. Its crystal consists of octahedral molecules [Zn(IDA)(AdeH)(H₂O)₂] where the selective Zn–N9(AdeH) bond, involving the most basic N(AdeH) donor atom, occupies the trans position versus the Zn–N(IDA) bond. The Zn(II)–N9(AdeH) binding mode seems to be rare enough in comparison to those previously reported for Zn(II) and AdeH or a variety of related ligands. The chelate-nucleobase recognition process is further accomplished by an O–H(aqua)⋯N3(adenine) inter-ligand H-bonding interaction, without any intra-molecular IDA–nucleobase interaction. This finding is attributed to the polarizing effect of Zn(II) on the aqua ligand and the possibilities of AdeH acting as N-donor for the metal(II) atom and H-acceptor for an intra-molecular inter-ligand H-bonding interaction. There are no aromatic π,π-stacking contributions in the 3D H-bonded network, where all polar N–H (IDA or AdeH) and O–H (aqua) bonds are involved as donors in H-bonding interactions, which include AdeH:AdeH and IDA:AdeH pairing by double inter-molecular bridges.     

Evaluation of the Hydrophilic Complexant N,N,N’,N’-tetraethyldiglycolamide (TEDGA) and its Methyl-substituted Analogues in the Selective Am(III) Separation

ABSTRACT

N,N,N’,N’-tetraethyldiglycolamide (TEDGA) is used in the French EXAm (extraction of americium) process to separate Am(III) from Cm(III) and Ln(III). In this study, the complexation behavior of TEDGA towards actinides(III) and lanthanides(III) was compared to its methyl-substituted derivatives Me-TEDGA and Me₂-TEDGA under experimental conditions applying to the EXAm process. Using the EXAm solvent, 0.6 mol/L N,N’-dimethyl-N,N’-dioctyl-hexylethoxymalonamide (DMDOHEMA) and 0.45 mol/L bis(2-ethylhexyl)-phosphoric acid (HDEHP), An(III) and Ln(III) distribution ratios increase in the order TEDGA < Me-TEDGA < Me₂-TEDGA. This is explained by differences in the strength of complexation in the aqueous phase: Conditional stability constants for the formation of [Cm(DGA)_x]³⁺ complexes decrease in the order TEDGA > Me-TEDGA > Me₂-TEDGA, as shown by time-resolved laser fluorescence spectroscopy (TRLFS). TRLFS measurements verified the exclusive existence of [Cm(DGA)₃]³⁺ complexes in the aqueous phase. Both the homoleptic [Cm(DMDOHEMA)_n]³⁺ and the heteroleptic [Cm(DGA)_x(DMDOHEMA)_y]³⁺ complexes were detected in the organic phase, as postulated in the literature.^[14]     

Metal binding properties of poly[N,N,N′,N′-tetrakis(2-hydroxypropyl)ethylenediamine methacrylate]

Summary When incorporated into a polymer hydrogel, the metal chelator, N,N,N,N-tetrakis(2-hydroxypropyl)ethylenediamine (THPED), retains its metal binding properties. The resultant poly(THPED methacrylate) homopolymer is a polybase with displacement binding constants for copper (II) and zinc(II) of-3.11 and-6.55, respectively, as compared to values for THPED of-3.83 and-7.44. The chelating capacity of the polymer for various divalent metal ions at pH 5.5 follows the order Cu>Cd>Co>Zn>Mn, while calcium and magnesium do not bind. Metal ion release curves indicate that after 30 hours, Cd(II), Co(II), Zn(II), and Mn(II) are released at a slow, steady rate, while Cu(II) is not released under experimental conditions.     

Cationic olefin Pd(II) complexes bearing α-iminoketone N,O-ligands: unprecedented isomerisation of the methoxycyclooctenyl ligand

The reaction of [Pd(η¹,η²-C₈H₁₂OMe)Cl]₂ with α-iminoketone ligands affords cationic η¹,η²-5-methoxycyclooctenyl Pd(II) complexes, the intramolecular and interionic structures of which were investigated in both solution and solid state; such complexes undergo unprecedented isomerisation to η¹,η²-1-methoxycyclooctenyl complexes assisted by weak nucleophiles such as olefins or alkynes.     

Removal of Copper(II) from a Concentrated Sulphate Medium by Cloud Point Extraction Using an N,N′-Bis(salicylaldehyde)Ethylenediimine Di-Schiff Base Chelating Ligand

Various chelating ligands have been investigated for the cloud point extraction of several metal ions. However, limited studies on the use of the Schiff base ligands have been reported. In this work, cloud point extraction behavior of copper(II) with N,N′‐bis(salicylaldehyde)Ethylenediimine Schiff base chelating ligand, (H₂SALEN), was investigated in aqueous concentrated sulphate medium. The extraction process used is based on the formation of hydrophobic H₂SALEN–copper(II) complexes that are solubilized in the micellar phase of a non‐ionic surfactant, i.e. ethoxylated (9.5EO) tert‐butylphenol. The copper(II) complexes are then extracted into the surfactant‐rich phase above cloud point temperature. Different parameters affecting the extraction process of Cu(II), such as equilibrium pH, extractant concentration, and non‐ionic surfactant concentration were explored. The extraction of Cu(II) was studied in the pH range of 2–11. The results obtained showed that it was profoundly influenced by the pH of the aqueous medium. The concentration factor, C_f, of about 17 with extraction efficiency of E % ≈100 was achieved. The stoichiometry of the extracted complex of copper(II) was ascertained by the Yoe–Jones method to give a composition of 1:1 (Cu:H₂L). The optimum conditions of the extraction‐removal have been established as the following: (1) 1.86 × 10^?3 mol/L ligand; (2) 3 wt% surfactant; (3) pH of 8 (4) 0.5 mol/L Na₂SO₄ and (5) temperature of 60 °C.     

Synthesis and properties of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane

A new kind of polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was prepared by the anionic polymerization with a “seed solution” as initiator. The synthesis of monomers N,N′-bis(hydroxydiphenylsilyl)tetraphenylcyclodisilazane (BHPTPC), N,N′-bis(chlorodiphenylsilyl)tetraphenylcyclodisilazane (BCPTPC), and 1,3-dichloro-1,1,3,3-tetraphenyldisilazane (DCTPS) are all reported in this study. The synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane was characterized by ¹H–NMR, ²⁹Si–NMR, gel permeation chromatography (GPC), and intrinsic viscosity. The thermal stability of the polysiloxane was studied by isothermal gravimetric analysis (IGA). The results demonstrated that the synthesized polysiloxane containing N,N′-bis(diphenylsilyl)tetraphenylcyclodisilazane had excellent thermal stability. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 929–933, 2001     

Effects of N,N′-Ethylenebis(stearamide) on the Properties of Poly(ethylene terephthalate)/Organo-montmorillonite Nanocomposite

Poly(ethylene terephthalate)/organo-montmorillonite (PET/OMMT) nanocomposites were melt-compounded using twin screw extruder followed by injection molding. N,N′-ethylenebis(stearamide) (EBS) was selected as a dispersing agent to improve the dispersibility and exfoliation of OMMT clay in PET matrix. Morphological properties of the PET/OMMT nanocomposites were examined by using X-ray diffraction analysis, transmission electron microscopy and atomic force microscopy. Thermal properties of the nanocomposites were characterized by using dynamic mechanical thermal analysis. It was found that the OMMT are well dispersed and exfoliated in the presence of EBS. Remarkable enhancement in impact strength and storage modulus of PET/OMMT was achieved by the addition of EBS.     

The nucleation effect of N,N′-bis(benzoyl) alkyl diacid dihydrazides on crystallization of biodegradable poly(l-lactic acid)

Five N,N??-bis(benzoyl) alkyl diacid dihydrazides were synthesized from benzoyl hydrazine and alkyl diacyl dichloride which were derived from alkyl diacid via acylation. PLLA/N,N??-bis(benzoyl) alkyl diacid dihydrazide samples were prepared by melt blending and hot-press forming process. The nucleation effect of N,N??-bis(benzoyl) alkyl diacid dihydrazide on crystallization of biodegradable poly(l-lactic acid) (PLLA) was investigated using differential scanning calorimetry (DSC) and vicat softening analysis. The results showed that five N,N??-bis(benzoyl) alkyl diacid dihydrazides acted as powerful nucleating agent for PLLA; with incorporation of N,N??-bis(benzoyl) alkyl diacid dihydrazide, the crystallization peak became sharper and shifted to higher temperature as the degree of supercooling decreased at a cooling rate of 1?°C/min from melt. The nucleation activities of five N,N??-bis(benzoyl) alkyl diacid dihydrazides were quantitatively determined. It is shown that N,N??-bis(benzoyl) suberic acid dihydrazide has higher nucleating activity than the other N,N??-bis(benzoyl) alkyl diacid dihydrazides. In the presence of N,N??-bis(benzoyl) alkyl diacid dihydrazide, the melting behavior of PLLA is affected significantly. In addition, the thermal stability of PLLA/0.8?% N,N??-bis(benzoyl) alkyl diacid dihydrazide is tested and reported. Compared to the neat PLLA, the onset degradation temperature of PLLA/0.8?% N,N??-bis(benzoyl) alkyl diacid dihydrazide samples has been decreased significantly.