DSP+FPGA数据处理系统的研究与应用

针对铣削加工中心主轴刚度检测系统实时性的要求,重点阐述了DSP FPGA的数字硬件系统和流水线结构的CORDIC算法在FPGA中的实现,并通过仿真和实验对CORDIC算法的理论值和计算数值进行对比分析,结果表明,计算数值非常接近理论值.     

美国流体动力工程研究中心简介

本文简要介绍了美国国家流体动力工程中心的基本情况、研究方向和教学计划.在此基础上对我国流体动力传动与控制的科研单位和企业的发展提出了一些看法.     

增量式旋转轴定向的应用实例

绝对值编码器能够准确地保持坐标位置,因此在需要定位或定向时常选用这种编码器.但某些时候由于改造的机械或者资金情况的限制只能使用增量式编码器,文中旨在讨论在这种情况下如何实现旋转轴的定向和定位.     

"认知"是信息化应用的绊脚石——访中国航天时代电子公司第十六研究所、七一七一厂信息处处长徐四海

此次航空航天信息化的大型选题报道让记者有幸来到地处关中平原,沃野千里,依山傍水,是与罗马并称为世界古都的"西安"进行一线采访.经过一夜的风雨洗礼,让西安这座古城尤显清新爽朗,仿佛这场风雨是特意为迎接我们而将这座城市冲刷地如此洁净,街道两旁郁郁葱葱的热带植物让你犹如置身南方小城一般.而我们此行的第一站便是位于西安市南郊航天城的中国航天时代电子公司第十六研究所、七一七一厂(以下简称7171厂).     

清理沼气废液废渣仅用五分钟

7月25日上午,江苏省农机具开发应用中心陈新华副主任、农业部南京农机化研究所陈永生主任等5人,来到江苏涟水县与农机局有关人员一起进行沼气清渣车清渣试验.研制成功的清渣车在小李集办事处胡楼村吴国成家中现场进行沼气池清渣,一池沼气废液废渣清理完毕,仅用5分钟,省时,省工,安全,效果很好.     

船舶ERP选型:集成性是关键

当前,信息化已经渗透到世界船舶工业的设计、生产、管理、服务等方方面面,其应用的深度与广度决定了行业综合水平的高低,成为大至一个国家的船舶工业、小至一个船舶企业能否在市场中生存和发展的关键.当造船业已经普遍意识到,以"信息化推动造船现代化"是中国造船工业追赶国际先进水平的最后机遇时,造船业的生存发展与IT厂商的策略几乎在同一时间不谋而合,在造船业竞争的搏奕中厂商的相助少不了.     

2007年中国机床工具行业十大新闻

1.中央和地方省市主要领导频繁视察机床行业企业,国家为数控机床产业发展创造了空前良好的发展环境 胡锦涛、吴邦国、温家宝、贾庆林、李长春等党和国家领导人以及辽宁、黑龙江、山东、江苏、云南、湖北、广东、陕西、浙江、天津、重庆等省市主要领导相继视察了机床工具厂和数控系统厂.各级领导频繁视察,为数控机床产业的发展创造了空前良好的发展环境.     

走区域应用示范与技术创新服务体系新模式

东营市位于黄河入海口,是黄河三角洲的中心城市,是在石油矿区基础上建设起来的新兴工业城市.近年来,除石油工业外,石油化工、盐化工、造纸、机电、轻纺、建材及生物医药等制造业门类得到较快发展,涌现出一批实力较强的企业集团,制造业逐步在东营市经济发展中占据了重要地位.     

匈牙利农业机械化发展情况特点

匈牙利一向是一个重农国家,它位于欧洲中部的喀尔巴阡山盆地.全国地势低洼,北部为丘陵、南部为平原,气候适宜,耕地平坦.平原约占国土面积的60%,低丘陵地和山地约占40%.农业用地586万公顷,其中可耕地450万公顷,约占国土面积的48%.匈牙利种植的农作物主要有小麦、玉米和马铃薯等,主要出口以肉类和谷类为主的农产品.     

基于VB和OpenGL的数控铣削仿真系统研究

介绍在Windows XP环境下,利用Visual Basic6.0和OpenGL开发的一个可视化的数控铣削仿真系统.该系统具有良好的界面和交互性,实现了数控加工轨迹的模拟仿真,并较好地完成了NC程序的正确性检查.     

Minimal Realization of Linear Graph Models for Multi-physics Systems

An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t...     

INTEGRAL EQUATION METHOD＇S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.     

Non-monotonic material contrast in scanning ion and scanning electron images

30 keV Ga⁺ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z₂, and shows a non-monotonic relationship between contrast and Z₂. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z₂, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory.     

Short-Term Relay Quality Prediction Algorithm Based on Long and Short-Term Memory

The fraction defective of semi-finished products is predicted to optimize the process of relay production lines, by which production quality and productivity ar...     

End-to-End Multiview Gesture Recognition for Autonomous Car Parking System

The use of hand gestures can be the most intuitive human-machine interaction medium.The early approaches for hand gesture recognition used device-based methods....     

Application of Feature Extraction through Convolution Neural Networks and SVM Classifier for Robust Grading of Apples

This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an...     

分布动态载荷识别的抗噪处理

针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性.     

基于MELTAC-N平台的核电厂安全级DCS环网研究与测试

针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

ANGULAR DISTORTION ALLOWABLE VALUE AND ASSESS METHOD OF WELD ON COKE TOWER

A graph as the new engineering method for estimate the safety of bulging deformation of coke tower is proposed. Through stresses analysis of circumferential weld of coke tower and comparing the stresses produced by pressure with heat stress of steady state, residual stress, bending stress produced by both itself weight and wind loads, it showed that the stresses produced by pressure on the angle distortion are the main factor of equivalent stress of the combined stress. After comparing four kinds of stress controlling conditions, the relation to stress with depth of angular distortion, grade of curvature of angular distortion and half of region of angular distortion has been inferred. Graph of deformation allowable value of coke tower for different condition by angular distortion and half of region of angular distortion has been plotted. The five steps for its engineering use have been explained. The lighter the grade of curvature is, the larger of bulge allowance, may be, and the bigger of depth of angular distortion may pose too. For the coke tower with a popular structure of Dg 5 400 mm×28 mm, the result by graph is nearly more than the result of two formulas formed by other research, the error is less than 7.0%. But, the graph can be easily applied to different size of angular distortion.