Hydrodesulfurization of thiophene on carbon nanofiber supported Co/Ni/Mo catalysts

Co, Mo, NiMo and CoMo catalysts supported on alumina, fishbone and platelet carbon nanofibers (CNFs) have been prepared. The dispersion of the oxide phases was qualitatively studied and compared using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The reducibility of the catalysts was studied by temperature programmed reduction (TPR). Hydrodesulfurization (HDS) of thiophene was used as a model reaction to compare the activity of different catalysts. The activity tests showed that the alumina supported catalysts exhibited higher activity compared to the corresponding CNF supported catalysts, and the NiMo catalysts were more active than the corresponding CoMo catalysts. The thiophene HDS activity was correlated with the dispersion of the molybdenum species and the reducibility of different catalysts. Interestingly, the CNF supported Co catalysts have higher thiophene HDS activity than the CNF supported Co(Ni)Mo catalysts.     

A comparative study on the effect of promoter content of hydrodesulfurization catalysts at different evaluation scales

CoMo and NiMo supported Al₂O₃ catalysts have been investigated for hydrotreating of model molecule as well as industrial feedstock. Activity studies were carried out for thiophene and SRGO hydrodesulfurization (HDS) in an atmospheric pressure and batch reactor respectively. These activities on sulfided catalysts were evaluated as a function of promoter content [M/(M + Mo) = 0.30, 0.34, 0.39; M = Co or Ni] using fixed (ca. 8 wt.%) molybdenum content. The promoted catalysts were characterized by textural properties, XRD, and temperature programmed reduction (TPR). TPR spectra of the Co and Ni promoter catalysts showed that Ni promotes the easy reduction of Mo species compared with Co. With the variation of promoter content NiMo catalyst was found to be superior to CoMo catalyst for gas oil HDS, while at low-promoter content the opposite trend was observed for HDS of thiophene. The behavior was attributed to the several reaction mechanisms involved for gas oil HDS. A nice relationship was obtained for hydrodesulfurized gas oil refractive index (RI) and aromatic content, which corresponds to the Ni hydrogenation property.     

Mesoporous silica–alumina as support for Pt and Pt–Mo sulfide catalysts: Effect of Pt loading on activity and selectivity in HDS and HDN of model compounds

The potential of mesoporous silica–alumina (MSA) material as support for the preparation of sulfided Pt and Pt–Mo catalysts of varying Pt loadings was studied. The catalysts were characterized by their texture, hydrogen adsorption, transmission electron microscopy, temperature programmed reduction (TPR) and by activity in simultaneous hydrodesulfurization (HDS) of thiophene and hydrodenitrogenation (HDN) of pyridine. Sulfided Pt/MSA catalysts with 1.3 and 2 wt.% Pt showed almost the same HDS and higher HDN activities per weight amounts as conventional CoMo and NiMo/Al₂O₃, respectively. The addition of Pt to sulfided Mo/MSA led to promotion in HDS and HDN with an optimal promoter content close to 0.5 wt.%. The results of TPR showed strong positive effect of Pt on reducibility of the MoS₂ phase which obviously reflects in higher activity of the promoted catalysts. The activity of the MSA-supported Pt–Mo catalyst containing 0.5 wt.% Pt was significantly higher than the activity of alumina-supported Pt–Mo catalyst. Generally, Pt–Mo/MSA catalysts promoted by 0.3–2.3 wt.% Pt showed lower HDS and much higher HDN activities as compared to weight amounts of CoMo and NiMo/Al₂O₃. It is proposed that thiophene HDS and pyridine hydrogenation proceed over Pt/MSA and the majority of Pt–Mo/MSA catalysts on the same type of catalytic sites, which are associated with sulfided Pt and MoS₂ phases. On the contrary, piperidine hydrogenolysis takes place on different sites, most likely on metallic Pt fraction or sites created by abstraction of sulfur from MoS₂ in the presence of Pt.     

Supported (NiMo,CoMo)-carbide, -nitride phases: Effect of atomic ratios and phosphorus concentration on the HDS of thiophene and dibenzothiophene

A study on the catalytic properties of the transition metals (Ni,Co,Mo)-carbides, -nitrides for thiophene and dibenzothiophene hydrotreating was conducted. The (Ni,Co)-Mo carbides and the corresponding (Ni,Co)-Mo nitride phases showed a catalytic activity higher than conventional bimetallic (Ni,Co)-Mo sulfides. In addition, a study was done on the effect of the atomic ratios, i.e., 0.1 ≤ M⁺/(M⁺ + Mo) ≤ 0.9 where M⁺ stands for Ni or Co, and the concentration of promoters such as phosphorous, which was a structural stabilizing agent. The catalytic performance of the bimetallic NiMo and CoMo carbides and nitrides was studied using thiophene and dibenzothiophene hydrodesulfurization (HDS) as model reactions at 623 K and P = 1 atm. The catalytic activity of the dispersed carbide and nitride phases on the alumina carrier was more significant than that of the reference catalysts, alumina supported NiMo-S and CoMo-S. The metallic character of the NiMo and CoMo carbides was evidenced by their higher hydrogenation activity in thiophene HDS, while the nitrides favored both hydrogenation and hydrogenolysis type reactions.     

Effect of Zr-SBA-15 support on catalytic functionalities of Mo, CoMo, NiMo hydrotreating catalysts

SBA-15 and ZrO₂ (10–50 wt.%) containing SBA-15 mesoporous materials were prepared by direct and post-synthesis methods. Characterization using low angle XRD, pore size distribution, CO₂ chemisorption indicate that hexagonal mesoporous structure is retained even after ZrO₂ addition (25 wt.%). Mo, CoMo and NiMo catalysts prepared using these supports were examined by XRD, oxygen chemisorption, temperature programmed reduction (TPR). The catalysts were tested for hydrodesulfurization (HDS) of thiophene and hydrogenation (HYD) of cyclohexene. HDS of thiophene for 8%Mo, 3%Co8%Mo, and 3%Ni8%Mo increases with increasing ZrO₂ loading in SBA-15 up to 25 wt.%. Oxygen chemisorption and TPR hydrogen consumption indicated that the molybdenum dispersion and anion vacancies, and catalytic activities are significantly influenced by ZrO₂ content in Zr-SBA-15. A comparison indicated that TiO₂-SBA-15, ZrO₂-SBA-15 supported CoMo catalysts show higher activities for hydrodesulfurization.     

Catalytic activities of Co(Ni)Mo/TiO2–Al2O3 catalysts in gasoil and thiophene HDS and pyridine HDN: effect of the TiO2–Al2O3 composition

The effect of the TiO₂–Al₂O₃ mixed oxide support composition on the hydrodesulfurization (HDS) of gasoil and the simultaneous HDS and hydrodenitrogenation (HDN) of gasoil+pyridine was studied over two series of CoMo and NiMo catalysts. The intrinsic activities for gasoil HDS and pyridine HDN were significantly increased by increasing the amount of TiO₂ into the support, and particularly over rich- and pure-TiO₂-based catalysts. It is suggested that the increase in activity be due to an improvement in reducing and sulfiding of molybdena over TiO₂. The inhibiting effect of pyridine on gasoil HDS was found to be similar for all the catalysts, i.e., was independent of the support composition. The ranking of the catalysts for the gasoil HDS test differed from that obtained for the thiophene test at different hydrogen pressures. In the case of gasoil HDS, the activity increases with TiO₂ content and large differences are observed between the catalysts supported on pure Al₂O₃ and pure TiO₂. In contrast, in the case of the thiophene test, the pure Al₂O₃-based catalyst appeared relatively more active than the catalysts supported on mixed oxides. Also, in the thiophene test the difference in intrinsic activity between the pure Al₂O₃-based catalyst appeared relatively more active than the catalysts supported on mixed oxides. Also in the thiophene test, the difference in intrinsic activity between the pure Al₂O₃- and pure TiO₂-based catalysts is relatively small and dependent on the H₂ pressure used. Such differences in activity trend among the gasoil and the thiophene tests are due to a different sensitivity of the catalysts (by different support or promoter) to the experimental conditions used. The results of the effect of the H₂ partial pressure on the thiophene HDS, and on the effect of H₂S concentration on gasoil HDS demonstrate the importance of these parameters, in addition to the nature of the reactant, to perform an adequate catalyst ranking.     

Effect of Al and Ti content in HMS material on the catalytic activity of NiMo and CoMo hydrotreating catalysts in the HDS of DBT

Al- and Ti-containing HMS materials, with a Si/M (Me = Al(Ti)) molar ratio equal to 40, were used as supports for preparing NiMo and CoMo HDS catalysts. The supports and catalysts were characterized by N₂ adsorption–desorption (S_BET), X-ray diffraction (XRD), UV–vis diffuse reflectance (DRS UV–vis), temperature-programmed reduction (TPR) and Raman spectroscopy. The catalysts were tested in the hydrodesulphurization (HDS) reaction of dibenzothiophene (DBT). All supported NiMo and CoMo catalysts on Al-HMS and Ti-HMS substrates showed higher catalytic activity than their Me-free counterparts. We found two interesting correlations between the structure and chemical coordination of the supported oxide precursors and catalytic activity. The differences observed in catalyst performance are attributed to the structure and specific electronic properties of the supported active species. From our results, it appears possible to optimize the Al- and Ti-loading to maximize the HDS activity.     

Performance of spent sulfide catalysts in hydrodesulfurization of straight run and nitrogen-removed gas oils

After the test run of several months two kinds of commercial catalysts (NiMo/Al₂O₃ and CoMo/Al₂O₃) were examined in hydrodesulfurization (HDS) of straight run (SRGO) and nitrogen-removed gas oils, at 340 °C under 50 kg/cm² H₂. Hydrogen renewal between stages was attempted to show additional inhibition effects of the by-products such as H₂S and NH₃. Spent NiMo/Al₂O₃ and CoMo/Al₂O₃ catalysts showed contrasting activities in HDS and susceptibility to nitrogen species, according to their catalytic natures, compared to those of their virgin ones. HDS over spent NiMo/Al₂O₃ was significantly improved by removal of nitrogen species, while that over spent CoMo/Al₂O₃ was much improved by H₂ refreshment. The activity for refractory sulfur species such as 4,6-dimethyldibenzothiophene was reduced more severely than that for the reactive sulfur species such as benzothiophenes over spent catalysts. The effects of both two-stage hydrodesulfurization and nitrogen-removal were markedly reduced over the spent NiMo when compared with those over virgin NiMo one. The acidity of the catalysts was correlated with the inhibition susceptibility by nitrogen species as well as H₂S and NH₃. Spent catalysts apparently lost their activity due to the carbon deposition, which covered the active sites more preferentially. The spent NiMo catalyst carried more deposited carbon with larger C/H ratio and nitrogen content. Higher acidity was found to be present on the NiMo catalyst, but this was greatly decreased by the carbon deposition. Additionally, the reactivity of nitrogen species in HDS was briefly discussed in relation to the acidity of the catalyst and its deactivation by carbon deposition.     

Unsupported NiMo Sulfide Catalysts Obtained from Nickel/Ammonium and Nickel/Tetraalkylammonium Thiomolybdates: Synthesis and Application in the Hydrodesulfurization of Dibenzothiophene

Ammonium and tetraalkylammonium tetrathiomolybdates impregnated with nickel nitrate were used as precursors of unsupported NiMo sulfide catalysts. The precursors were decomposed either in situ during the course of a dibenzothiophene (DBT) hydrodesulfurization (HDS) test or ex situ through sulfidation by H₂S/H₂ (15% v/v H₂S). The catalysts were characterized by thermogravimetric analysis, N₂ adsorption, scanning electron microscopy (SEM), and X-ray diffraction. Textural and catalytic properties of these NiMo catalysts were strongly influenced both by the nature of the precursor and the activation procedure. For ex-situ activated NiMo catalysts, the use of carbon-containing tetraalkylammonium thiosalts as precursors did not lead to a significant improvement in HDS activity. For in situ activated NiMo catalysts, the role of carbon is more complex. The use of tetramethyl- or tetrapropylammonium tetrathiomolybdate salts led to a poor final HDS activity while using tetrabutylammonium tetrathiomolybdate, a net increase in HDS activity was observed compared to the use of the non-carbon containing ammonium tetrathiomolybdate. This was related to the development of a mesoporous structure and to a high increase in surface area. This result is in agreement with those found previously for CoMo catalysts and confirms that tetraalkylammonium tetrathiomolybdate salts with long alkyl chains lead to Co- or Ni-promoted MoS₂-based catalysts with enhanced HDS activity if in situ activated.     

Effect of catalyst composition on the hydrodesulphurization and hydrodemetallization of atmospheric residual oil

A series of CoMo/Al₂O₃ catalysts containing a third additive, a Si, Ti, or P compound, were prepared using a consecutive impregnation method. The activities for the hydrodesulphurization (HDS), hydrodemetallization (HDM) and Conradson carbon residue (CCR) reduction of atmospheric residual oil were tested in a semi-batch basket type reactor. Cycle-aging tests were carried out for comparison of catalyst stability. The intrinsic rate constants of HDS from a semi-empirical calculation were used to test the coke tolerance of the catalysts. The CoMo/Al₂O₃ catalyst with a titanium compound added exhibited the highest activity enhancement for HDS and HDM reactions. It was also found that the surface activity maintenance can be effectively improved by the addition of an appropriate amount of titanium compound. The activity and stability of CoMo and NiMo catalysts for the HDS and HDM reactions were also compared.     

Comparative study of the activity of cobalt and nickel as promoters of HDS catalysts

A series of trimetallic (NiCoMo) hydrodesulphurisation supported catalysts were prepared using a successive impregnation method, varying the ratio of promoters Ni/(Ni + Co) and maintaining the ratio (Ni + Co)/Mo constant. Optima for higher thiophene hydrodesulphurisation activity were found for ratios Ni/(Ni + Co) of 0.7 and 0.8. It is suggested that the optima may be strongly dependent on method of catalyst preparation, and/or type of support employed. Presulphidation was found to increase the activity in NiMo more than in CoMo. Testing of commercial catalysts confirmed various differences between CoMo and NiMo catalysts.     

Magnesia-Supported Mo, CoMo and NiMo Sulfide Catalysts Prepared by Nonaqueous Impregnation: Parallel HDS/HDN of Thiophene and Pyridine and TEM Microstructure

MgO-supported Mo, CoMo and NiMo sulfide catalysts were prepared by impregnation using slurry MoO₃/methanol and solutions of Ni and Co nitrates in methanol. The catalysts exhibited very high hydrodesulfurization activity and low hydrodenitrogenation activity in competitive reactions of thiophene and pyridine. The promotion effect for HDS of Ni and Co was higher for our MgO-supported MoS₂ catalysts than for conventional Al₂O₃-supported catalysts. The specific features in the TEM images of MgO-supported catalysts as compared to conventional Al₂O₃-supported catalysts were fairly broad MoS₂ slab length distribution and the presence of unusually long MoS₂ slabs.     

Synthesis and characterization of W-SBA-15 and W-HMS as supports for HDS

W-modified HMS and SBA-15 mesoporous materials (Si/W molar ratio equal to 40) were synthesized using sodium tungstate as tungsten source. In order to prepare NiW catalysts these mesoporous materials were impregnated with an aqueous solution of nickel salt of 12-tungstophosphoric acid Ni_3/2PW₁₂O₄₀. The synthesized W-HMS, W-SBA-15 materials and NiW catalysts have been characterized by S_BET, XRD, UV–Vis DRS, FT-IR, TPD of NH₃, ²⁹Si MAS NMR, SEM and HRTEM. The influence of these particular supports on catalytic activity of NiW catalysts was studied in the reaction of hydrodesulfurization (HDS) of thiophene. The results from the FT-IR and UV–Vis DR spectroscopy confirm incorporation of W into the HMS and SBA-15 structures. Additionally ²⁹Si MAS NMR measurements revealed relatively stronger effect of W ion incorporation in HMS structure on degree of silica cross-linking as compared to the effect of W ion incorporation in SBA-15 structure. The catalytic study showed that both W-HMS and W-SBA-15 materials modified with W are good supports for NiW catalysts in the HDS reaction of thiophene. The catalysts show lower selectivity for butanes than a reference NiW/γ-Al₂O₃ catalyst leveling of about 10% for chosen experimental conditions.     

Investigation of CoNiMo/Al2O3 catalysts: Relationship between H2S adsorption and HDS activity

Sulfidation of trimetallic CoNiMo/Al₂O₃ catalysts was studied by thermogravimetry at 400 °C under flow and pressure conditions. Results were compared with those obtained on prepared and industrial CoMo/Al₂O₃ and NiMo/Al₂O₃ catalysts. The amount of sorbed H₂S on the sulfided solids was measured at 300 °C in the H₂S pressure range 0–3.5 MPa at constant H₂ pressure (3.8 MPa). The adsorption isotherms were simulated using a model featuring dissociated adsorption of H₂S on supported metal sulfides and bare alumina. The amount of sulfur-vacancy sites could thus be determined under conditions close to industrial practice. A relationship with activity results for thiophene HDS and benzene hydrogenation was sought for.     

Nitrogen Tolerant Hydrodesulfurization Catalysts Based on Rh and Ru Promoted Mo/Al2O3

Rh and Ru promoted Mo/Al₂O₃ catalysts were tested in HDS of thiophene in the presence of different amounts of pyridine and compared with CoMo/Al₂O₃. The Rh and Ru promoted catalysts were more nitrogen tolerant and in the presence of pyridine showed higher HDS activities than CoMo/Al₂O₃. This was explained by higher C–N bond hydrogenolysis activity and high nitrogen tolerance of the free Rh and Ru sulfides in the promoted catalysts.     

磷添加方式对NiMo/Al2O3催化剂加氢脱硫性能的影响

采用分步浸渍法制备了不同磷添加方式改性的NiMo/Al₂O₃催化剂,在固定床微反装置上考察了该系列催化剂对焦炉煤气中噻吩加氢脱硫（HDS）性能的影响,采用BET、X射线衍射（XRD）、H₂程序升温还原（H₂-TPR）、NH₃程序升温脱附（NH₃-TPD）、C₄H₄S(H₂)程序升温脱附[C₄H₄S(H₂)-TPD]、X射线光电子能谱（XPS）、高清透射电镜（HRTEM）和拉曼（Raman）等分析手段对催化剂进行表征。结果表明,不同磷添加方式制备NiMo/Al₂O₃催化剂的HDS性能存在较大差异。其中,催化剂PNi-Mo/Al和PMo-Ni/Al表面弱吸附解离活性位增强,对焦炉煤气中噻吩有较好的低温加氢脱硫活性,以含292.5mg/m³噻吩的模拟焦炉煤气为原料时,PNi-Mo/Al在250℃下对噻吩的脱硫率达61%。对于PNi-Mo/Al和PMo-Ni/Al催化剂,先浸渍P、Ni或者P、Mo时,P优先和载体Al₂O₃作用,减弱了活性金属组分Ni、Mo与载体间的相互作用,而又防止Ni或者Mo与载体间相互作用过低而聚集,提高了Ni、Mo在载体表面的均匀分散,生成能够促进硫化形成Ⅱ型活性相Ni-Mo-S的NiMoO₄物种。NiMoO₄和MoO₃之间的协同作用提高了催化剂的硫化度,使HDS活性得以提高。     

A comparative study for heavy oil hydroprocessing catalysts at micro-flow and bench-scale reactors

CoMo and NiMo catalysts were prepared and the catalytic activities were evaluated in fixed bed micro-flow and bench-scale reactors with different feed composition. Experiments were conducted at conditions close to those that exist in the industrial practice. Due to the different nature of the feeds, the conditions were varied with respect to both evaluation scales. The fresh and spent catalysts were characterized. Spent catalyst textural properties indicated that catalysts were deactivated and the surface area and pore volume dropped by 20–60%. The adsorption–desorption hysteresis of spent catalysts indicated that cylindrical pores are deactivated at the pore mouth and played an important role in modification by either closing one end of the pore or forming a narrow neck pore, which is indicative of the formation of “ink-bottle” type pores. Thus, the deposition of metal and carbon takes place preferentially at the pore entrance, which causes pore mouth plugging. These results are also supported by the SEM–EDAX analysis, where metal and carbon depositions are evident and taking place at the superficial region of a catalyst particle. The increase in absolute area of hysteresis is based on the catalyst's average pore diameter: the higher the average pore diameter, the lower the area of the spent catalyst. The activity and deactivation of the catalyst are discussed on the basis of catalyst porosity and deposited metal characterization. The composition of catalysts varies, considering two applications in a multi-reactor system: a CoMo catalyst for the first reactor, and a NiMo in the second reactor; the former is supported on γ-Al₂O₃ and the latter on TiO₂/Al₂O₃. As a comparison, the CoMo catalyst exhibited better hydrogenolysis while the NiMo catalyst showed better hydrogenation activity in both micro-flow and bench-scale reactors. It appears that there is a moderate effect of TiO₂ content in support on Ni and V hydrodemetallization (HDM) while hydrodeasphaltenization (HDAs) and hydrodesulfurization (HDS) activities were slightly improved when a partially hydrotreated feed, which contains more refractory compounds than virgin feedstock, was employed.     

Synergism Between Ni and W in the Niw/ γ-Al2O3 Hydrotreating Catalysts

A series of NiW/ γ-Al₂O₃ catalysts (20 and 30 wt% W and 1–5 wt% Ni) have been prepared and studied by TPR and XPS. HDS activity has been tested in the thiophene conversion. The effect of Ni and W loadings on the formation of different structures is presented. In the calcined catalysts several phases coexist, concentrations of which depend on the Ni/(Ni+W) atomic ratio. The Ni synergistic effect in the HDS reaction is confirmed by the increase in the HDS activity (~10–15 times). This effect is ascribed to the formation of an active NiWS phase of high dispersion from the mixed NiW oxide precursors. At higher Ni/Ni+W ratio a redistribution of active components in additional amount ofNiWS phase during sulfidation is suggested.     

Sulfided Mo and CoMo supported on zeolite as hydrodesulfurization catalysts: transformation of dibenzothiophene and 4,6-dimethyldibenzothiophene

The hydrodesulfurization (HDS) of dibenzothiophene (DBT) and of 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out on sulfided Mo and CoMo on HY catalysts, and also on sulfided Mo and CoMo on alumina catalysts (fixed bed reactor, 330°C, 3 MPa hydrogen pressure). On all the catalysts, the two reactants transformed through the same parallel pathways: direct desulfurization (DDS) leading to biphenyl-type compounds, and desulfurization after hydrogenation (HYD) leading first to tetrahydrogenated intermediates, then to cyclohexylbenzene-type products. However, additional reactions were observed with the zeolite-supported catalysts, namely methylation of the reactants, cracking of the desulfurized products, and, in the case of 4,6-DMDBT, displacement of the methyl groups and transalkylation. The global activity of Mo/zeolite in DBT or 4,6-DMDBT transformation as well as its activity for the production of desulfurized products (HDS) were much higher than those of Mo/alumina. On the other hand, cobalt exerted a promoting effect on the activity in the transformation of DBT or 4,6-DMDBT of all the molybdenum catalysts. However, this effect was much less significant with the zeolite support than with the alumina support, which indicated that the promoter was not well associated to molybdenum on the zeolite support. Therefore, the activity of CoMo/zeolite in the HDS of DBT was much lower than that of CoMo/alumina. On the contrary, in the case of 4,6-DMDBT CoMo/zeolite was more active in HDS than CoMo/alumina. This increase in HDS activity was attributed to the transformation of 4,6-DMDBT into more reactive isomers through an acid-catalyzed methyl migration. The consequence was that on the zeolite-supported catalyst 4,6-DMDBT was more reactive than DBT.     

Physico-chemical characterization and catalysis on SBA-15 supported molybdenum hydrotreating catalysts

SBA-15 supported Mo, CoMo, NiMo catalysts were prepared. The supports were characterized by surface area, pore size distribution, and X-ray diffraction. The finished catalysts in oxide state were characterized by surface area analysis and X-ray diffraction in the region where the molybdenum oxide lines are seen. The sulfided catalysts were examined by oxygen chemisorption at low temperatures. The catalytic functionalities of these catalysts viz hydrodesulfurization (HDS) and hydrogenation were evaluated on sulfided catalysts. The catalytic activities of these catalysts are compared with γ-Al₂O₃- and SiO₂-supported catalysts. An attempt is made to understand the relationship between oxygen chemisorption and catalytic activities with the help of other characterization results.