共查询到20条相似文献,搜索用时 265 毫秒
1.
数控车床被广泛地应用在机械生产中,本文研究了积屑瘤、机床和刀具等因素对数控车床螺纹加工精度产生的影响,通过实践经验,总结了提高数控车床车削螺纹精度的一些方法,从而提高数控车床螺纹零件的加工精度。 相似文献
2.
为在数控车床上加工梯形螺纹、球头螺纹、曲线螺纹等复杂螺纹,根据多年教学和指导学生参加各类数控技能大奏,对梯形螺纹等的加工工艺和宏程序的应用进行了研究,总结出一套利用宏程序在数控车床上快速高效加工合格梯形螺纹等复杂螺纹的方法. 相似文献
3.
数控车削加工梯形螺纹的方法 总被引:1,自引:0,他引:1
在数控车床上进行梯形螺纹的车削,有较大的技术难度.本文阐述了梯形螺纹在数控车床上的加工方法,举例分析了三种数控车削加工梯形螺纹的编程方法,为车削合格梯形螺纹提供了参考. 相似文献
4.
梯形螺纹是机械加工中比较应用较多的一种螺纹,也是普通车床加工中一项重要的加工技能,但是如何在数控车床上进行梯形螺纹的车削加工,时常会因为梯形螺纹的加工工艺、刀具选择、加工程序等原因很少应用数控车床进行加工。本文主要阐述在应用数控车床实现梯形螺纹车削加工的方法,正确的应用程序,以及对加工工艺和参数进行分析。 相似文献
5.
在数控车床上经常采用直进法和斜进法加工螺纹,然而要加工较大螺距的梯形螺纹,并且机床刚性不足时,就要用到左右切削的方法加工螺纹.文中通过对梯形螺纹的工艺、刀具角度和加工方法进行分析,研究了在FANUC-Oi系统的数控车床上利用宏指令简单方便地加工出梯形螺纹. 相似文献
6.
多头螺纹在数控车床上的加工是一个难点,通过对多头螺纹的加工工艺分析、刀具选择和加工方法的研讨,针对FANUC—0i系统数控车床探索出一套合适的多头螺纹方法及加工程序。 相似文献
7.
8.
叙述了用数控车床加工油管螺纹的加工原理,编程方法,得到了用数控车床加工油管螺纹能确保零件的技术要求,并能轻工人劳动强度,提高生产效率的结论。 相似文献
9.
10.
随着数控机床的发展和普及,以及数控技术应用程度的不断提高,操作人员常选择在数控车床上加工梯形螺纹,针对FANUC-0i系统的数控车床采用直进法切削梯形螺纹的工艺、刀具和加工方法进行分析研究,从而在数控车床上高效率地加工出梯形螺纹。 相似文献
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献