神经网络H^∞跟踪控制研究

提出一种用于不确定性非线性系统的具有Ｈ＾∞跟踪特性的神经网络（ＮＮ）适应控制器，使Ｈ＾∞控制理论与ＮＮ有机地结合起来，该控制方案对ＮＮ学习的近似误差以及外部干扰有强的鲁棒性。对一类电液伺服系统的仿真研究表明了该控制方案的有效性。     

不确定性机器人的神经网络补偿控制

本文研究具有不确定性的机器人的轨迹跟踪控制问题。提出了一种由计算力矩控制器和神经网络补偿控制器构成的控制方案。探讨了一种用神经网络估计机器人系统不确定性的途径。给出了神经补偿控制器的设计方法，并证明了闭环系统的收敛性。仿真结构表明所提方案具有很好的鲁棒性和抗干扰能力。     

具有H^∞跟踪特性的不确定性机器人神经网络控制

针对不确定性机器人提出一种具有Ｈ＾∞跟踪特性的神经网络（ＮＮ）控制器，使Ｈ＾∞控制理论与ＮＮ有机地结合起来。通过适当选择控制变量加权因子可以使由于ＮＮ近似误差以及外部干扰引起的误差动态衰减到期望的程度下。文基基于Ｌｙａｐｕｎｏｖ方法给出了ＮＮ学习自适应律，Ｈ＾∞跟踪特性的证明。最后通过在两自由度机器人控制中的应用表明该方案的可行性。     

机器人计算力矩不确定性的神经网络补偿控制

提出一种由计算力矩控制器和神经网络补偿控制器相结合的控制方案,探讨了用神经网络补偿机器人计算力矩不确定性的方法,推导了网络权值的自适应调整律,并证明了系统的稳定性和误差的收敛性.该方案结构简单、鲁棒性强,且神经网络补偿器有较好的适应性,无须事先知道机器人动力学参数和结构的精确值.对机器人轨迹跟踪的仿真结果表明,所提方案具有很好的鲁棒性和抗干扰能力.     

用进化RBF神经网络控制二级倒立摆

提出了一种应用ＲＢＦ神经网络和遗传算法相结合的控制算法,用于控制二级倒立摆系统,这种方法把线性控制系统的条件作为非线性最优控制性能指标的约束条件,用改进的遗传算法求解使性能指标最小的ＲＢＦＮＮ控制器参数。仿真结果表明,该方案优于传统的状态反馈方法和模糊控制方法,具有更大的稳定域,抗干扰能力更强。     

具有零动态的SISO仿射非线性系统的神经网络自适应跟踪控制

针对具有零动态的SISO仿射非线性系统提出了一种神经网络直接自适应跟踪控制方法.采用梯度下降算法最小化未知理想控制器与神经网络控制器的误差代价函数以获得参数自适应律,控制器中无需另加鲁棒控制项.基于Lyapunov稳定性定理证明了在该控制器的作用下能保证输出跟踪误差及相应闭环系统的所有状态最终一致有界及神经网络参数的收敛性.仿真结果验证了该文方法的有效性.     

混沌系统的神经网络预测控制

提出一种基于预测控制的神经网络控制方法，将模型未知时的混沌运动控制到不稳定的不动点（UFP）处，该控制系统不需要UFP的位置及其局性态等知识，它包括观测器、带反馈校正的神经网络在预测器和在线训练的神经网络控制器，其方法简便，收敛速度比现有同类方法快得多，同时还分析了控制系统的稳定性，并证明了神经网络控制器的收敛性，理论推导和仿真结果都表明了该方法的有效性。     

一类非线性系统的自适应控制

针对一类未知的MIMO非线性系统的控制问题,提出了一种基于混合遗传算法的自适应RBF神经网络控制器(HGA-RBFNNC),使系统能跟踪期望输出.采用混合遗传算法,在线确定RBF神经网络的结构和参数,当误差满足一定要求时,该控制器转入按照基于Lyapunov稳定性理论的自适应律进行网络权值的进一步调整,这样既在线建立神经网络又保证了整个系统的全局稳定性和收敛性.仿真实验结果表明,该控制器能够快速跟踪期望输出,而且具有很好的稳定性和收敛性.     

过程辨识和控制中神经网络结构与方法

本文分析了人工神经网络在过程控制和辨识领域的多种结构与方法，重点阐述了在线自适应神经网络控制器（ＯＡＮＮＣ）的结构和算法，并对神经网络在过程控制中应用的前景作了展望。     

非完整移动机器人的神经网络鲁棒自适应控制

在非完整移动机器人轨迹跟踪问题中,针对机器人运动学与动力学模型的参数和非参数不确定性,提出了一种混合神经网络鲁棒自适应轨迹跟踪控制器,该控制器由运动学控制器和动力学控制器两部分组成;其中,采用了参数自适应的径向基神经网络对运动学模型的未知部分进行了建模,并采用权值在线调整的单层神经网络和自适应鲁棒控制项构成了动力学控制器;基于Lyapunov方法的设计过程保证了系统的稳定性和收敛性,仿真结果证明了算法的有效性。     

不确定机器人的自适应神经网络控制与学习

针对具有未知动态的电驱动机器人,研究其自适应神经网络控制与学习问题.首先,设计了稳定的自适应神经网络控制器,径向基函数(RBF)神经网络被用来逼近电驱动机器人的未知闭环系统动态,并根据李雅普诺夫稳定性理论推导了神经网络权值更新律.在对回归轨迹实现跟踪控制的过程中,闭环系统内部信号的部分持续激励(PE)条件得到满足.随着PE条件的满足,设计的自适应神经网络控制器被证明在稳定的跟踪控制过程中实现了电驱动机器人未知闭环系统动态的准确逼近.接着,使用学过的知识设计了新颖的学习控制器,实现了闭环系统稳定、改进了控制性能.最后,通过数字仿真验证了所提控制方法的正确性和有效性.     

电驱动刚性机器人的鲁棒神经网络复合控制

采用逐步逆向的设计思想，提出一种新的电驱动刚性机器人轨迹跟踪的鲁棒神经网络复合控制策略，该策略不仅能有效地消除模型不确定性的影响，而且可避免复杂的求导运算以及对关节角加速度可测的要求。给出了控制器的具体组成和神经网络连接权的在线学习算法，理论表明该算法能保证跟踪误差及神经网络连接权估计最终一致有界，仿真结果也验证了算法的有效性。     

Neural networks for advanced control of robot manipulators

Presents an approach and a systematic design methodology to adaptive motion control based on neural networks (NNs) for high-performance robot manipulators, for which stability conditions and performance evaluation are given. The neurocontroller includes a linear combination of a set of off-line trained NNs, and an update law of the linear combination coefficients to adjust robot dynamics and payload uncertain parameters. A procedure is presented to select the learning conditions for each NN in the bank. The proposed scheme, based on fixed NNs, is computationally more efficient than the case of using the learning capabilities of the neural network to be adapted, as that used in feedback architectures that need to propagate back control errors through the model to adjust the neurocontroller. A practical stability result for the neurocontrol system is given. That is, we prove that the control error converges asymptotically to a neighborhood of zero, whose size is evaluated and depends on the approximation error of the NN bank and the design parameters of the controller. In addition, a robust adaptive controller to NN learning errors is proposed, using a sign or saturation switching function in the control law, which leads to global asymptotic stability and zero convergence of control errors. Simulation results showing the practical feasibility and performance of the proposed approach to robotics are given.     

具有H_∞跟踪性能的机器人自适应PID控制

针对非线性不确定机器人系统的轨迹跟踪控制问题,提出一种鲁棒自适应PID控制算法.该控制器由主控制器和监督控制器组成.主控制器以常规PID控制为基础,基于滑模控制思想设计PID参数的自适应律,根据误差实时修正PID参数.基于Lyapunov函数设计的监督控制器补偿自适应PID控制器与理想控制器之间的差异,使系统具有设定的H_∞的跟踪性能.最后,两关节机器人的仿真实验结果表明了算法的有效性.

Abstract：

A robust adaptive PID control algorithm is proposed for trajectory tracking of robot manipulators with nonlinear uncertainties.The controller is composed of a main controller and a supervisory controller.The main controller is designed based on the traditional PID controller.The parameters of the PID controller are updated online according to the system running errors with the adaptation law based on the sliding mode control.The supervisory controller is proposed to compensate the error between the adaptive PID controller and the ideal controller in the sense of the Lyapunov function with the specified H_∞ tracking performance.Finally, the simulation results based on a two-joint robot manipulator show the effectiveness of the presented controller.     

Design of Adaptive Robot Control System Using Recurrent Neural Network

The use of a new Recurrent Neural Network (RNN) for controlling a robot manipulator is presented in this paper. The RNN is a modification of Elman network. In order to solve load uncertainties, a fast-load adaptive identification is also employed in a control system. The weight parameters of the network are updated using the standard Back-Propagation (BP) learning algorithm. The proposed control system is consisted of a NN controller, fast-load adaptation and PID-Robust controller. A general feedforward neural network (FNN) and a Diagonal Recurrent Network (DRN) are utilised for comparison with the proposed RNN. A two-link planar robot manipulator is used to evaluate and compare performance of the proposed NN and the control scheme. The convergence and accuracy of the proposed control scheme is proved.     

多自由度机械臂的饱和输出反馈有限时间同步位置控制EI北大核心CSCD

针对输入受限的多自由度机械臂高精度位置控制问题,本文充分考虑驱动器饱和非线性的影响,提出了多自由度机械臂输出反馈饱和有限时间比例–微分(PD)+同步位置控制策略,应用Lyapunov稳定性理论和几何齐次性技术证明了闭环系统的全局有限时间稳定性.非线性饱和函数的恰当引入,使得所提出的控制器具有清晰明确的上界,可以通过预先选择满足特定条件的控制器参数有效避免驱动器饱和问题;同步控制项的恰当引入,使得所提出的控制器兼顾了多自由度机械臂各轴间的同步协调性,从而获得更快的收敛速度和更好的系统整体性能,满足工程实际对机械臂的高精度要求.本文的数值仿真结果验证了所提出的控制方法的有效性和可行性.     

Neural network-based adaptive controller design of roboticmanipulators with an observer

A neural network (NN)-based adaptive controller with an observer is proposed for the trajectory tracking of robotic manipulators with unknown dynamics nonlinearities. It is assumed that the robotic manipulator has only joint angle position measurements. A linear observer is used to estimate the robot joint angle velocity, while NNs are employed to further improve the control performance of the controlled system through approximating the modified robot dynamics function. The adaptive controller for robots with an observer can guarantee the uniform ultimate bounds of the tracking errors and the observer errors as well as the bounds of the NN weights. For performance comparisons, the conventional adaptive algorithm with an observer using linearity in parameters of the robot dynamics is also developed in the same control framework as the NN approach for online approximating unknown nonlinearities of the robot dynamics. Main theoretical results for designing such an observer-based adaptive controller with the NN approach using multilayer NNs with sigmoidal activation functions, as well as with the conventional adaptive approach using linearity in parameters of the robot dynamics are given. The performance comparisons between the NN approach and the conventional adaptation approach with an observer is carried out to show the advantages of the proposed control approaches through simulation studies     

Adaptive neural controller for cooperative multiple robot manipulator system manipulating a single rigid object

In this article, an adaptive neural controller is developed for cooperative multiple robot manipulator system carrying and manipulating a common rigid object. In coordinated manipulation of a single object using multiple robot manipulators simultaneous control of the object motion and the internal force exerted by manipulators on the object is required. Firstly, an integrated dynamic model of the manipulators and the object is derived in terms of object position and orientation as the states of the derived model. Based on this model, a controller is proposed that achieves required trajectory tracking of the object as well as tracking of the desired internal forces arising in the system. A feedforward neural network is employed to learn the unknown dynamics of robot manipulators and the object. It is shown that the neural network can cope with the unknown nonlinearities through the adaptive learning process and requires no preliminary offline learning. The adaptive learning algorithm is derived from Lyapunov stability analysis so that both error convergence and tracking stability are guaranteed in the closed loop system. Finally, simulation studies and analysis are carried out for two three-link planar manipulators moving a circular disc on specified trajectory.     

Fuzzy and Recurrent Neural Network Motion Control among Dynamic Obstacles for Robot Manipulators

An integration of fuzzy controller and modified Elman neural networks (NN) approximation-based computed-torque controller is proposed for motion control of autonomous manipulators in dynamic and partially known environments containing moving obstacles. The fuzzy controller is based on artificial potential fields using analytic harmonic functions, a navigation technique common used in robot control. The NN controller can deal with unmodeled bounded disturbances and/or unstructured unmodeled dynamics of the robot arm. The NN weights are tuned on-line, with no off-line learning phase required. The stability of the closed-loop system is guaranteed by the Lyapunov theory. The purpose of the controller, which is designed as a neuro-fuzzy controller, is to generate the commands for the servo-systems of the robot so it may choose its way to its goal autonomously, while reacting in real-time to unexpected events. The proposed scheme has been successfully tested. The controller also demonstrates remarkable performance in adaptation to changes in manipulator dynamics. Sensor-based motion control is an essential feature for dealing with model uncertainties and unexpected obstacles in real-time world systems.     

Adaptive Control of a Two-Link Robot Using Batch Least-Square Identifier

We design a regulation-triggered adaptive controller for robot manipulators to efficiently estimate unknown parameters and to achieve asymptotic stability in the presence of coupled uncertainties.Robot manipulators are widely used in telemanipulation systems where they are subject to model and environmental uncertainties.Using conventional control algorithms on such systems can cause not only poor control performance,but also expensive computational costs and catastrophic instabilities.Therefore,system uncertainties need to be estimated through designing a computationally efficient adaptive control law.We focus on robot manipulators as an example of a highly nonlinear system.As a case study,a 2-DOF manipulator subject to four parametric uncertainties is investigated.First,the dynamic equations of the manipulator are derived,and the corresponding regressor matrix is constructed for the unknown parameters.For a general nonlinear system,a theorem is presented to guarantee the asymptotic stability of the system and the convergence of parameters'estimations.Finally,simulation results are discussed for a two-link manipulator,and the performance of the proposed scheme is thoroughly evaluated.