The size and density of Ag nanoparticles on n-layer MoS2 exhibit thicknessdependent behavior. The size and density of these particles increased and decreased, respectively, with increasing layer number (n) of n-layer MoS2. Furthermore, the surface-enhanced Raman scattering (SERS) of Ag on this substrate was observed. The enhancement factor of this scattering varied with the thickness of MoS2. The mechanisms governing the aforementioned thickness dependences are proposed and discussed.
The development of high-resolution nanosized photoacoustic contrast agents is an exciting yet challenging technological advance. Herein, antibody (breast cancer-associated antigen 1 (Brcaa1) monoclonal antibody)- and peptide (RGD)-functionalized gold nanoprisms (AuNprs) were used as a combinatorial methodology for in situ photoacoustic imaging, angiography, and localized hyperthermia using orthotopic and subcutaneous murine gastric carcinoma models. RGD-conjugated PEGylated AuNprs are available for tumor angiography, and Brcaa1 monoclonal antibody-conjugated PEGylated AuNprs are used for targeting and for in situ imaging of gastric carcinoma in orthotopic tumor models. In situ photoacoustic imaging allowed for anatomical and functional imaging at the tumor site. In vivo tumor angiography imaging showed enhancement of the photoacoustic signal in a time-dependent manner. Furthermore, photoacoustic imaging demonstrated that tumor vessels were clearly damaged after localized hyperthermia. This is the first proof-of-concept using two AuNprs probes as highly sensitive contrasts and therapeutic agents for in situ tumor detection and inhibition. These smart antibody/peptide AuNprs can be used as an efficient nanotheranostic platform for in vivo tumor detection with high sensitivity, as well as for tumor targeting therapy, which, with a single-dose injection, results in tumor size reduction and increases mice survival after localized hyperthermia treatment.
By combining ab initio calculations and experiments, we demonstrate how the band gap of the transition metal trichalcogenide TiS3 can be modified by inducing tensile or compressive strain. In addition, using our calculations, we predicted that the material would exhibit a transition from a direct to an indirect band gap upon application of a compressive strain in the direction of easy electrical transport. The ability to control the band gap and its nature could have a significant impact on the use of TiS3 for optical applications. We go on to verify our prediction via optical absorption experiments that demonstrate a band gap increase of up to 9% (from 0.99 to 1.08 eV) upon application of tensile stress along the easy transport direction.
Surface-enhanced Raman scattering (SERS) has emerged as an excellent analytical tool for the effective detection and fingerprint identification of various chemicals. Recently, significant progress has been made in the fabrication of SERS-active substrates using simple, inexpensive, and affordable methods. The full potential of universal SERS diagnostics will likely be realized with the development of approaches and devices capable of effectively detecting analytes on various surfaces as well as in multicomponent media. In addition, the combination of implantable or wearable SERS-active substrates and remote portable devices enables real-time diagnostics that ideally fit the concept of personalized medicine. In this paper, we summarize recent achievements in fabricating flexible SERS substrates made of cellulose paper, polymer membranes, and textile fibrous films. Emphasis is placed on the in-situ extraction and detection of various chemicals in real-world surfaces and complex media using flexible nanofibrous SERS platforms. The potential SERS applications and future perspectives in on-site diagnostics are also discussed.
Two-dimensional ZrS2 materials have potential for applications in nanoelectronics because of their theoretically predicted high mobility and sheet current density. Herein, we report the thickness and temperature dependent transport properties of ZrS2 multilayers that were directly deposited on hexagonal boron nitride (h-BN) by chemical vapor deposition. Hysteresis-free gate sweeping, metalinsulator transition, and T–γ (γ ~ 0.82–1.26) temperature dependent mobility were observed in the ZrS2 films.
The in situ physicochemical analysis of nanostructured functional materials is crucial for advances in their design and production. X-ray coherent diffraction imaging (CDI) methods have recently demonstrated impressive potential for characterizing such materials with a high spatial resolution and elemental sensitivity; however, moving from the current ex situ static regime to the in situ dynamic one remains a challenge. By combining soft X-ray ptychography and single-shot keyhole CDI, we performed the first in situ spatiotemporal study on an electrodeposition process in a sealed wet environment, employed for the fabrication of oxygen-reduction catalysts, which are key components for alkaline fuel cells and metal-air batteries. The results provide the first experimental demonstration of theoretically predicted Turing–Hopf electrochemical pattern formation resulting from morphochemical coupling, adding a new dimension for the in-depth in situ characterization of electrodeposition processes in space and time.
In recent years, triboelectric nanogenerators have attracted much attention because of their unique potential in self-powered nanosensors and nanosystems. In this paper, we report a cylindrical spiral triboelectric nanogenerator (S-TENG), which not only can produce high electric output to power display devices, but also can be used as a self-powered displacement sensor integrated on a measurement ruler. At a sliding speed of 2.5 m/s, S-TENG can generate a short-circuit current (ISC) of 30 µA and an open-circuit voltage (VOC) of 40 V. As the power source, we fabricate a transparent and flexible hand-driven S-TENG. Furthermore, we demonstrate a self-powered S-TENG-based measuring tapeline that can accurately measure and display the pulled-out distance without the need for an extra battery. The results obtained indicate that TENG-based devices have good potential for application in self-powered measurement systems.
The acid-catalyzed ring-opening reaction of styrene oxide was used as a probe reaction for evaluating the acidic properties of carboxylated carbocatalysts. Significant discrepancies in the initial reaction rates were normalized using the total number of carboxyl groups, and demonstrated that the average catalytic activities of the carboxyl moieties on the carbocatalysts differed. Comparisons between the apparent activation energy Ea and the pre-exponential factor A, derived from Arrhenius analysis, demonstrated that A varied more significantly, and therefore had a more significant effect on the reaction rates than Ea. The variation in the calculated pKa values of the carboxyl groups was attributed to the electronic effects of the nitro groups. This hypothesis was supported by the temperature programmed desorption profiles of nitrogen monoxide ions.
A universal platform with Mn doping and hyaluronic acid (HA) modification, based on mesoporous silica (mSiO2), was designed and used as a basic multifunctional material with magnetic resonance (MR) imaging. Furthermore, we added flexible functions through the addition of functional molecules. Specially, two typical compounds, hydrophobic perfluorooctyl bromide (PFOB) and hydrophilic doxorubicin (DOX), were loaded into the channels to obtain PFOB@Mn@mSiO2@HA (PMMH) or DOX@Mn@mSiO2@HA (DMMH) nanoparticles for dual-mode imaging or imaging and therapy, respectively. The PMMH and DMMH nanoparticles were highly targeted to the lymph system in vitro and in vivo. MR and ultrasound imaging of PMMH nanoparticles were performed in the lymph system, while MR imaging and chemotherapy of DMMH nanoparticles was used to detect cancer. These results showed that both PMMH and DMMH nanoparticles can be designed with high lymph targeting efficiency. PMMH nanoparticles are a dual-mode contrast agent for both ultrasound and MR imaging for the lymph system and DMMH nanoparticles are powerful agents for the combined diagnosis and therapy of cancer in vivo.
A novel self-delivered prodrug system was fabricated for tumor-targeting therapy. In this nanosystem, the Arg-Gly-Asp-Ser (RGDS) tetrapeptide was used to improve the therapeutic index to integrin-overexpressing tumor cells. The antitumorous drug camptothecin was further appended to the ε-amino group of lysine by 20-O-succinyl linkage and controllably released via hydrolytic cleavage. Prodrug molecules self-assembled into fibrillar nano-architectures and achieved the capability of self-delivery after being injected subcutaneously into mice. Introduction of hydrophobic myristic acid favored the self-assembly and enhanced the cellular internalization of the prodrugs. In vitro and in vivo studies demonstrated that the self-assembled nanofibers could effectively target integrinoverexpressing tumorous cells and inhibit tumor growth via RGD-mediated specific targeting. Therefore, the traditional idea that fibrillar structures hold low therapeutic efficacy due to poor cell uptake can be challenged.
The dynamic behavior of octahedral gold nanoparticles (NPs) and nanoparticle clusters (NPCs) in aqueous solution is studied by in-situ liquid-cell transmission electron microscopy (TEM). The octahedral Au NPs/NPCs show preferential orientations in the liquid cell, due to the interaction with the SiNx window. The Au NPs show long-range reversible hopping and three-dimensional (3D) rotational motions in the liquid environment. At the same time, the Au NPCs and NPs perform slow stick-slip and stick-roll motions, respectively, with a centripetal trend. The centripetal motions were explained by a liquid evaporation-induced radial flow model, in which the NPCs/NPs trajectories are controlled by Stokes forces and surface friction by the silicon nitride window. The calculated radius-dependent force (Fc) on the NPCs/NPs shows a semi-linear correlation with the distance r between the NPCs/NPs and the center of mass, accompanied with stochastic fluctuations, in agreement with the model predictions. This work thus demonstrates the effectiveness of in situ liquid-cell TEM for the in-depth understanding of complicated liquid flow and force interactions in nanomaterials.
In-plane symmetry is an important contributor to the physical properties of two-dimensional layered materials, as well as atomically thin heterojunctions. Here, we demonstrate anisotropic/isotropic van der Waals (vdW) heterostructures of ReS2 and MoS2 monolayers, where interlayer coupling interactions and charge separation were observed by in situ Raman-photoluminescence spectroscopy, electrical, and photoelectrical measurements. We believe that these results could be helpful for understanding the fundamental physics of atomically thin vdW heterostructures and creating novel electronic and optoelectronic devices.
Copper sulfide (Cu7S4) nanoparticles coated with an ultra-high payload (~5.0 × 107 fluorine atoms per particle) of fluorinated ligands (oleylamine functionalized 3,5-bis(trifluoromethyl)benzaldehyde, 19FOAm) exhibited a single intense 19F magnetic resonance (MR) signal and efficient near infrared photothermal performance in water medium. In vivo assessment revealed strong 19F MR signals at cancerous lesions and effective inhibition of tumor growth after photothermal treatment, indicating the great potential of these fabricated nanoprobes for simultaneous 19F MR imaging and photothermal therapy.
The development of an electrocatalyst based on abundant elements for the oxygen evolution reaction (OER) is important for water splitting associated with renewable energy sources. In this study, we develop an interconnected Ni(Fe)OxHy nanosheet array on a stainless steel mesh (SSNNi) as an integrated OER electrode, without using any polymer binder. Benefiting from the well-defined three-dimensional (3D) architecture with highly exposed surface area, intimate contact between the active species and conductive substrate improved electron and mass transport capacity, facilitated electrolyte penetration, and improved mechanical stability. The SSNNi electrode also has excellent OER performance, including low overpotential, a small Tafel slope, and long-term durability in the alkaline electrolyte, making it one of the most promising OER electrodes developed.
Rheumatoid arthritis (RA) etiology and amelioration remains a challenge in modern therapeutics. Herein, we explored the synergistic effect of allogenic bone marrow stem cell (BMSC) translation and photodynamic treatment of RA with tetra sulfonatophenyl porphyrin (TSPP) and TiO2 nanocomposites as a new strategy for RA theranostics. The translation of BMSCs with miRNAs into infected joints in long bones post-photodynamic therapy is helpful for treating and understanding RA pathophysiology. We observed that allogenic BMSC translation combined with TSPP-TiO2 nanocomposites can significantly (p < 0.01) lower the concentrations of serum biomarkers (tumor necrosis factor-α and interleukin-17) in a collagen induced arthritis (CIA) murine model, both in vitro and in vivo, as well as improve other parameters such as arthritis score, BMSC count, complete blood count, and numbers of platelets, red blood cells, and white blood cells. Moreover, a fluorescent TSPP in the feet or long bones and X-ray bioimaging of RA joints revealed the clinical efficacy of BMSCs combined with TSPP-TiO2 nanocomposites. Microarray data analysis illustrated that rno-mir-375-3p and rno-mir-196b-3p were up-regulated by approximately 100-fold in the BMSCs of ameliorated RA post-photodynamic therapy with TSPP-TiO2 nanocomposites. Our study not only suggests a new approach for RA theranostics, but also helps in understanding RA pathophysiology.
One-dimensional hollow nanostructures have potential applications in many fields and can be fabricated using various methods. Herein, a selective-oxidation route for the synthesis of unique TexSey nanotubes (STNTs) with a controlled morphology using TexSey@Se core–shell nanowires (TSSNWs) as a template is reported. Because of the lower redox potential of TeO2/Te compared to that of H2SeO3/Se, the Te in TSSNWs can be preferentially oxidized by an appropriate oxidant of HNO2 to form STNTs. The inner diameters and wall thicknesses of the STNTs can be tuned by modulating the core diameters and shell thicknesses of the TSSNWs, respectively. The STNTs can be assembled into a monolayer composed of well-arranged nanotubes using the Langmuir–Blodgett technique. A device based on films stacked with 10 STNT monolayers was fabricated to investigate the photocoductivity of the STNTs. The STNTs exhibited a good photoresponse over the whole ultraviolet–visible spectrum, revealing their potential for application in optoelectronic devices.
Systemic thrombolysis with intravenous tissue plasminogen activator (tPA) remains the only proven treatment that is effective in improving the clinical outcome of patients with acute ischemic stroke. However, thrombolytic therapy has some major limitations such as hemorrhage, neurotoxicity, and the short time window for the treatment. In this study, we designed iron oxide (Fe3O4) nanorods loaded with 6% tPA, which could be released within ~30 min. The Fe3O4 nanorods could be targeted to blood clots under magnetic guidance. In addition, the release of tPA could be significantly increased using an external rotating magnetic field, which subsequently resulted in a great improvement in the thrombolytic efficiency. Systematic and quantitative studies revealed the fundamental physical processes involved in the enhanced thrombolysis, while the in vitro thrombolysis assay showed that the proposed strategy could improve thrombolysis and recanalization rates and reduce the risk of tPA-mediated hemorrhage in vivo. Such a strategy will be very useful for the treatment of ischemic stroke and other deadly thrombotic diseases such as myocardial infarction and pulmonary embolism in clinical settings.
The oxygen reduction reaction (ORR) is essential in research pertaining to life science and energy. In applications, platinum-based catalysts give ideal reactivity, but, in practice, are often subject to high costs and poor stability. Some cost-efficient transition metal oxides have exhibited excellent ORR reactivity, but the stability and durability of such alternative catalyst materials pose serious challenges. Here, we present a facile method to fabricate uniform CoxOy nanoparticles and embed them into N-doped carbon, which results in a composite of extraordinary stability and durability, while maintaining its high reactivity. The half-wave potential shows a negative shift of only 21 mV after 10,000 cycles, only one third of that observed for Pt/C (63 mV). Furthermore, after 100,000 s testing at a constant potential, the current decreases by only 17%, significantly less than for Pt/C (35%). The exceptional stability and durability results from the system architecture, which comprises a thin carbon shell that prevents agglomeration of the CoxOy nanoparticles and their detaching from the substrate.
C dots (CDs) have shown great potential in bioimaging and phototherapy. However, it is challenging to manipulate their fluorescent properties and therapeutic efficacy to satisfy the requirements for clinic applications. In this study, we prepared S, Se-codoped CDs via a hydrothermal method and demonstrated that the doping resulted in excitation wavelength-independent near-infrared (NIR) emissions of the CDs, with peaks at 731 and 820 nm. Significantly, the CDs exhibited a photothermal conversion efficiency of ~58.2%, which is the highest reported value for C nanostructures and is comparable to that of Au nanostructures. Moreover, the CDs had a large two-photon absorption cross section (~30,045 GM), which allowed NIR emissions and the photothermal conversion of the CDs through the two-photon excitation (TPE) mechanism. In vitro and in vivo tests suggested that CDs can function as new multifunctional phototheranostic agents for the TPE fluorescence imaging and photothermal therapy of cancer cells.
We propose a new analytical approach combining vibrational spectroscopy and acoustic tomography for the detection and characterization of vesicles inside Streptomyces bacteria. Using atomic force microscopy and infrared spectroscopy (AFM-IR), we detect the presence of triglyceride vesicles. Their sizes in depth are measured with high accuracy using mode synthesizing atomic force microscopy (MS-AFM). We conducted a comparative study of AFM-IR and MS-AFM, and highlighted the advantages of the coupling of these techniques in having a full characterization (chemical, topographical, and volumetric) of a biological sample. With these complementary techniques, a complete access to the vesicle size distribution has been achieved with an accuracy of less than 50 nm. A 3D reconstruction of bacteria showing the in-depth distribution of vesicles is given to underline the great potential of the acoustic method.
