High-frequency performance of subthreshold SOI MESFETs

Results from silicon-on-insulator (SOI) MESFETs designed for subthreshold operation are presented. The transistors have subthreshold slopes as low as 78 mV/dec and off-state drain currents approaching 1 pA//spl mu/m. Drain current saturation can be achieved with drain voltages of less than 0.5 V and with output impedance>100 M/spl Omega//spl middot//spl mu/m. The cutoff frequency of a 500-nm gate length device exceeds 1 GHz at currents significantly less than 1 /spl mu/A//spl mu/m. These results suggest that subthreshold SOI MESFETs might have useful applications in mixed-signal, micropower circuit design.     

Characterization of 1.9- and 1.4-nm ultrathin gate oxynitride by oxidation of nitrogen-implanted silicon substrate

For gate oxide thinned down to 1.9 and 1.4 nm, conventional methods of incorporating nitrogen (N) in the gate oxide might become insufficient in stopping boron penetration and obtaining lower tunneling leakage. In this paper, oxynitride gate dielectric grown by oxidation of N-implanted silicon substrate has been studied. The characteristics of ultrathin gate oxynitride with equivalent oxide thickness (EOT) of 1.9 and 1.4 nm grown by this method were analyzed with MOS capacitors under the accumulation conditions and compared with pure gate oxide and gate oxide nitrided by N/sub 2/O annealing. EOT of 1.9- and 1.4-nm oxynitride gate dielectrics grown by this method have strong boron penetration resistance, and reduce gate tunneling leakage current remarkably. High-performance 36-nm gate length CMOS devices and CMOS 32 frequency dividers embedded with 57-stage/201-stage CMOS ring oscillator, respectively, have been fabricated successfully, where the EOT of gate oxynitride grown by this method is 1.4 nm. At power supply voltage V/sub DD/ of 1.5 V drive current Ion of 802 /spl mu/A//spl mu/m for NMOS and -487 /spl mu/A//spl mu/m for PMOS are achieved at off-state leakage I/sub off/ of 3.5 nA//spl mu/m for NMOS and -3.0 nA//spl mu/m for PMOS.     

SODEL FET: novel channel and source/drain profile engineering schemes by selective Si epitaxial growth technology

In this paper, novel channel and source/drain profile engineering schemes are proposed for sub-50-nm bulk CMOS applications. This device, referred to as the silicon-on-depletion layer FET (SODEL FET), has the depletion layer beneath the channel region, which works as an insulator like a buried oxide in a silicon-on-insulator MOSFET. Thanks to this channel structure, junction capacitance (C/sub j/) has been reduced in SODEL FET, i.e., C/sub j/ (area) was /spl sim/0.73 fF//spl mu/m/sup 2/ both in SODEL nFET and pFET at Vbias =0.0 V. The body effect coefficient /spl gamma/ is also reduced to less than 0.02 V/sup 1/2/. Nevertheless, current drives of 886 /spl mu/A//spl mu/m (I/sub off/=15 nA//spl mu/m) in nFET and -320 /spl mu/A//spl mu/m (I/sub off/=10 nA//spl mu/m) in pFET have been achieved in 70-nm gate length SODEL CMOS with |V/sub dd/|=1.2 V. New circuit design schemes are also proposed for high-performance and low-power CMOS applications using the combination of SODEL FETs and bulk FETs on the same chip for 90-nm-node generation and beyond.     

A 22-nm damascene-gate MOSFET fabrication with 0.9-nm EOT and local channel implantation

We introduce a novel CMOS transistor fabrication technique using damascene gate with local channel implantation (LCI). This transistor has a benefit to reduce the resistance of source/drain extension (SDE) localizing the severe blanket channel implantation under the channel only. It can reduce the junction capacitance as well. This process technology is reliable for the formation of channel length down to 22 nm with smooth gate line edge roughness. Some unique processes for the small transistor fabrication are also introduced. The 22-nm nMOSFET with 0.9 nm RTO is achieved with the drive current of 930 /spl mu/A//spl mu/m for the off-current of 100 nA//spl mu/m at 1.0 V. Hot carrier reliability exceeding 10 years for 1.0 V operation is also obtained.     

1.5-V single work-function W/WN/n/sup +/-poly gate CMOS device design with 110-nm buried-channel PMOS for 90-nm vertical-cell DRAM

This letter reports on 1.5-V single work-function W/WN/n/sup +/-poly gate CMOS transistors for high-performance stand-alone dynamic random access memory (DRAM) and low-cost low-leakage embedded DRAM applications. At V/sub dd/ Of 1.5-V and 25/spl deg/C, drive currents of 634 /spl mu/A//spl mu/m for 90-nm L/sub gate/ NMOS and 208 /spl mu/A-/spl mu/m for 110-nm L/sub gate/ buried-channel PMOS are achieved at 25 pA//spl mu/m off-state leakage. Device performance of this single work function technology is comparable to published low leakage 1.5-V dual work-function technologies and 25% better than previously reported 1.8-V single work-function technology. Data illustrating hot-carrier immunity of these devices under high electric fields is also presented. Scalability of single work-function CMOS device design for the 90-nm DRAM generation is demonstrated.     

Implementation and characterization of the double-gate MOSFET using lateral solid-phase epitaxy

In this paper, a simple high performance double-gate metal oxide semiconductor field effect transistor (MOSFET) using lateral solid-phase epitaxy (LSPE) is experimentally demonstrated and characterized. The thin channel of the double-gate MOSFET was obtained using the high quality LSPE crystallized layer. The fabricated double-gate MOSFET provides good current drive capability and steep subthreshold slope, and they are approximately 350 /spl mu/A//spl mu/m (@ V/sub ds/ = 2.5 V and V/sub gs/ - V/sub T/ = 2.5 V) and 78 mV/dec for the devices with 0.5 /spl mu/m channel length. Compared to the conventional single-gate transistor, the double-gate NMOSFET fabricated on the LSPE layer has better V/sub T/ roll-off characteristics, DIBL effect, and 1.72 times higher current drive. The peak effective electron mobility of the LSPE crystallized layer is approximately 382 cm/sup -2//V.s.     

Electrical characteristics of 8-/spl Aring/ EOT HfO/sub 2//TaN low thermal-budget n-channel FETs with solid-phase epitaxially regrown junctions

The authors demonstrate high-performing n-channel transistors with a HfO/sub 2//TaN gate stack and a low thermal-budget process using solid-phase epitaxial regrowth of the source and drain junctions. The thinnest devices have an equivalent oxide thickness (EOT) of 8 /spl Aring/, a leakage current of 1.5 A/cm/sup 2/ at V/sub G/=1 V, a peak mobility of 190 cm/sup 2//V/spl middot/s, and a drive-current of 815 /spl mu/A//spl mu/m at an off-state current of 0.1 /spl mu/A//spl mu/m for V/sub DD/=1.2 V. Identical gate stacks processed with a 1000-/spl deg/C spike anneal have a higher peak mobility at 275 cm/sup 2//V/spl middot/s, but a 5-/spl Aring/ higher EOT and a reduced drive current at 610 /spl mu/A//spl mu/m. The observed performance improvement for the low thermal-budget devices is shown to be mostly related to the lower EOT. The time-to-breakdown measurements indicate a maximum operating voltage of 1.6 V (1.2 V at 125 /spl deg/C) for a ten-year lifetime, whereas positive-bias temperature-instability measurements indicate a sufficient lifetime for operating voltages below 0.75 V.     

AlGaN/GaN/InGaN/GaN DH-HEMTs with an InGaN notch for enhanced carrier confinement

We report an AlGaN/GaN/InGaN/GaN double heterojunction high electron mobility transistors (DH-HEMTs) with high-mobility two-dimensional electron gas (2-DEG) and reduced buffer leakage. The device features a 3-nm thin In/sub x/Ga/sub 1-x/N(x=0.1) layer inserted into the conventional AlGaN/GaN HEMT structure. Assisted by the InGaN layers polarization field that is opposite to that in the AlGaN layer, an additional potential barrier is introduced between the 2-DEG channel and buffer, leading to enhanced carrier confinement and improved buffer isolation. For a sample grown on sapphire substrate with MOCVD-grown GaN buffer, a 2-DEG mobility of around 1300 cm/sup 2//V/spl middot/s and a sheet resistance of 420 /spl Omega//sq were obtained on this new DH-HEMT structure at room temperature. A peak transconductance of 230 mS/mm, a peak current gain cutoff frequency (f/sub T/) of 14.5 GHz, and a peak power gain cutoff frequency (f/sub max/) of 45.4 GHz were achieved on a 1/spl times/100 /spl mu/m device. The off-state source-drain leakage current is as low as /spl sim/5 /spl mu/ A/mm at V/sub DS/=10 V. For the devices on sapphire substrate, maximum power density of 3.4 W/mm and PAE of 41% were obtained at 2 GHz.     

An ultrathin vertical channel MOSFET for sub-100-nm applications

An ultrathin vertical channel (UTVC) MOSFET with an asymmetric gate-overlapped low-doped drain (LDD) is experimentally demonstrated. In the structure, the UTVC (15 nm) was obtained using the cost-effective solid phase epitaxy, and the boron-doped poly-Si/sub 0.5/Ge/sub 0.5/ gate was adopted to adjust the threshold voltage. The fabricated NMOSFET offers high-current drive due to the lightly doped (<1/spl times/10/sup 15/ cm/sup -3/) channel, which suppresses the electron mobility degradation. Moreover, an asymmetric gate-overlapped LDD was used to suppress the offstate leakage current and reduce the source/drain series resistance significantly as compared to the conventional symmetrical LDD. The on-current drive, offstate leakage current, subthreshold slope, and DIBL for the fabricated 50-nm devices are 325 /spl mu/A//spl mu/m, 8/spl times/10/sup -9/ /spl mu/A//spl mu/m, 87 mV/V, and 95 mV/dec, respectively.     

50-nm gate Schottky source/drain p-MOSFETs with a SiGe channel

We propose new SiGe channel p-MOSFETs with germano-silicide Schottky source/drains (S/Ds). The Schottky barrier-height (SBH) for SiGe is expected to be low enough to improve the injection of carriers into the SiGe channel and, as a result, current drivability is also expected to improve. In this work, we demonstrate the proposed Schottky S/D p-MOSFETs down to a 50-nm gate-length. The drain current and transconductance are -339 /spl mu/A//spl mu/m and 285 /spl mu/S//spl mu/m at V/sub GS/=V/sub DS/=-1.5 V, respectively. By increasing the Ge content in the SiGe channel from 30% to 35%, the drive current. and transconductance can be improved up to 23% and 18%, respectively. This is partly due to the lower barrier-height for strained Si/sub 0.65/Ge/sub 0.35/ channel than those for strained Si/sub 0.7/Ge/sub 0.3/ channel device and partly due to the lower effective mass of the holes.     

InGaAs/InP DHBTs with 120-nm collector having simultaneously high f/sub /spl tau//, f/sub max//spl ges/450 GHz

InP/In/sub 0.53/Ga/sub 0.47/As/InP double heterojunction bipolar transistors (DHBT) have been designed for increased bandwidth digital and analog circuits, and fabricated using a conventional mesa structure. These devices exhibit a maximum 450 GHz f/sub /spl tau// and 490 GHz f/sub max/, which is the highest simultaneous f/sub /spl tau// and f/sub max/ for any HBT. The devices have been scaled vertically for reduced electron collector transit time and aggressively scaled laterally to minimize the base-collector capacitance associated with thinner collectors. The dc current gain /spl beta/ is /spl ap/ 40 and V/sub BR,CEO/=3.9 V. The devices operate up to 25 mW//spl mu/m/sup 2/ dissipation (failing at J/sub e/=10 mA//spl mu/m/sup 2/, V/sub ce/=2.5 V, /spl Delta/T/sub failure/=301 K) and there is no evidence of current blocking up to J/sub e//spl ges/12 mA//spl mu/m/sup 2/ at V/sub ce/=2.0 V from the base-collector grade. The devices reported here employ a 30-nm highly doped InGaAs base, and a 120-nm collector containing an InGaAs/InAlAs superlattice grade at the base-collector junction.     

A new 50-nm nMOSFET with side-gates for virtual source-drain extensions

We have proposed and fabricated a novel 50-nm nMOSFET with side-gates, which induce inversion layers for virtual source/drain extensions (SDE). The 50-nm nMOSFETs show excellent suppression of the short channel effect and reasonable current drivability [subthreshold swing of 86 mV/decade, drain-induced barrier lowering (DIBL) of 112 mV, and maximum transconductance (g/sub m/) of 470 /spl mu/S//spl mu/m at V/sub D/=1.5 V], resulting from the ultra-shallow virtual SDE junction. Since both the main gate and the side-gate give good cut-off characteristics, a possible advantage of this structure in an application to multi-input NAND gates was investigated.     

Ideal rectangular cross-section Si-Fin channel double-gate MOSFETs fabricated using orientation-dependent wet etching

Ultranarrow and ideal rectangular cross section silicon(Si)-Fin channel double-gate MOSFETs (FXMOSFETs) have successfully been fabricated for the first time using [110]-oriented silicon-on-insulator (SOI) wafers and orientation-dependent wet etching. The transconductance (g/sub m/) normalized by 2/spl times/(Fin height) is found to be as high as 700 /spl mu/S//spl mu/m at V/sub d/=1 V in the fabricated 13-nm-thick and 82-nm-high Si- Fin channel double-gate MOSFET with a 105-nm gate length and a 2.2-nm gate oxide. The almost-ideal S-slope of 64 mV/decade is demonstrated in a 145-nm gate length device. These excellent results show that the Si-Fin channel with smooth [111]-oriented sidewalls is suitable to realize a high-performance FXMOSFET. The short-channel effects (SCEs) are effectively suppressed by reducing the Si-Fin thickness to 23 nm or less.     

Rail-to-rail super class AB CMOS operational amplifiers

Novel class AB single-stage operational amplifiers are presented. They feature rail-to-rail operation owing to the use of floating-gate input transistors. Initial charge of the floating gates is removed during fabrication, without any post-processing. The amplifiers are fast, simple, and able to operate at low supply voltages. They are highly power efficient owing to the enhanced (super) class AB operation based on adaptive biasing and local common-mode feedback. A 0.5 /spl mu/m CMOS implementation shows rail-to-rail operation with slew rates of about 40 V//spl mu/s for a load of 80 pF and 144 /spl mu/W of quiescent power consumption.     

High performance 35 nm gate length CMOS with NO oxynitride gate dielectric and Ni salicide

The 35 nm gate length CMOS devices with oxynitride gate dielectric and Ni salicide have been fabricated to study the feasibility of higher performance operation. Nitrogen concentration in gate oxynitride was optimized to reduce gate current I/sub g/ and to prevent boron penetration in the pFET. The thermal budget in the middle of the line (MOL) process was reduced enough to realize shallower junction depth in the S/D extension regions and to suppress gate poly-Si depletion. Finally, the current drives of 676 /spl mu/A//spl mu/m in nFET and 272 /spl mu/A//spl mu/m in pFET at V/sub dd/=0.85 V (at I/sub off/=100 nA//spl mu/m) were achieved and they are the best values for 35 nm gate length CMOS reported to date.     

GaAs MOSFET using InAlP native oxide as gate dielectric

GaAs metal-oxide-semiconductor field-effect transistors (MOSFETs) using wet thermally oxidized InAlP as the gate insulator are reported for the first time. Leakage current measurements show that the 11-nm-thick native oxide grown from an In/sub 0.49/Al/sub 0.51/P layer lattice-matched to GaAs has good insulating properties, with a measured leakage current density of 1.39/spl times/10/sup -7/ mA//spl mu/m/sup 2/ at 1 V bias. GaAs MOSFETs with InAlP native gate oxide have been fabricated with gate lengths from 7 to 2 /spl mu/m. Devices with 2-/spl mu/m-long gates exhibit a peak extrinsic transconductance of 24.2 mS/mm, an intrinsic transconductance of 63.8 mS/mm, a threshold voltage of 0.15 V, and an off-state gate-drain breakdown voltage of 21.2 V. Numerical Poisson's equation solutions provide close agreement with the measured sheet resistance and threshold voltage.     

A 90-nm low-power 32-kB embedded SRAM with gate leakage suppression circuit for mobile applications

In sub-100-nm generation, gate-tunneling leakage current increases and dominates the total standby leakage current of LSIs based on decreasing gate-oxide thickness. Showing that the gate leakage current is effectively reduced by lowering the gate voltage, we propose a local dc level control (LDLC) for SRAM cell arrays and an automatic gate leakage suppression driver (AGLSD) for peripheral circuits. We designed and fabricated a 32-kB 1-port SRAM using 90-nm CMOS technology. The six-transistor SRAM cell size is 1.25 /spl mu/m/sup 2/. Evaluation shows that the standby current of 32-kB SRAM is 1.2 /spl mu/A at 1.2 V and room temperature. It is reduced to 7.5% of conventional SRAM.     

High-performance enhancement-mode AlGaN/GaN HEMTs using fluoride-based plasma treatment

We report a novel approach in fabricating high-performance enhancement mode (E-mode) AlGaN/GaN HEMTs. The fabrication technique is based on fluoride-based plasma treatment of the gate region in AlGaN/GaN HEMTs and post-gate rapid thermal annealing with an annealing temperature lower than 500/spl deg/C. Starting with a conventional depletion-mode HEMT sample, we found that fluoride-based plasma treatment can effectively shift the threshold voltage from -4.0 to 0.9 V. Most importantly, a zero transconductance (g/sub m/) was obtained at V/sub gs/=0 V, demonstrating for the first time true E-mode operation in an AlGaN/GaN HEMT. At V/sub gs/=0 V, the off-state drain leakage current is 28 /spl mu/A/mm at a drain-source bias of 6 V. The fabricated E-mode AlGaN/GaN HEMTs with 1 /spl mu/m-long gate exhibit a maximum drain current density of 310 mA/mm, a peak g/sub m/ of 148 mS/mm, a current gain cutoff frequency f/sub T/ of 10.1 GHz and a maximum oscillation frequency f/sub max/ of 34.3 GHz.     

Graded base type-II InP/GaAsSb DHBT with f/sub T/=475 GHz

The first demonstration of a type-II InP/GaAsSb double heterojunction bipolar transistor (DHBT) with a compositionally graded InGaAsSb to GaAsSb base layer is presented. A device with a 0.4/spl times/6 /spl mu/m/sup 2/ emitter dimensions achieves peak f/sub T/ of 475 GHz (f/sub MAX/=265 GHz) with current density at peak f/sub T/ exceeding 12 mA//spl mu/m/sup 2/. The structure consists of a 25-nm InGaAsSb/GaAsSb graded base layer and 65-nm InP collector grown by MBE with breakdown voltage /spl sim/4 V which demonstrates the vertical scaling versus breakdown advantage over type-I DHBTs.     

Forward Body Biasing as a Bulk-Si CMOS Technology Scaling Strategy

Forward body biasing is a promising approach for realizing optimum threshold-voltage (V _TH) scaling in the era when gate dielectric thickness can no longer be scaled down. This is confirmed experimentally and by simulation of a 10-nm gate length MOSFET. Because forward body bias (VF) decreases the depletion width (X _DEP) in the channel region, it reduces V _TH rolloff significantly. MOSFET performance is maximized under forward body bias with steep retrograde channel doping, and such channel doping profiles are required to accomplish good short-channel behavior (small X _DEP ) at low V _TH notwithstanding body bias; therefore, the combination of forward body biasing with steep retrograde channel doping profile can extend the scaling limit of conventional bulk-Si CMOS technology to 10-nm gate length MOSFET. Considering forward biased p-n junction current, parasitic bipolar transistor, and CMOS latch-up phenomena, the upper limit for |VF| should be set at 0.6-0.7 V, which is sufficient to realize significant advantages of forward body biasing.