共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
采用Al-Mg、V-Ti 和Al-Mg+V-Ti对3.81wt%C-15wt%Cr铸铁进行变质处理,研究不同变质剂对高铬铸铁初生碳化物的变质机理。结果表明:Al-Mg变质的机理主要表现为脱氧脱硫净化铁液,增加形核的过冷度。低密度的脱氧和脱硫产物在上浮过程中扰乱了液态原子排列,把碳化物形核温度推向了更低的温度,但Al-Mg对初生碳化物的变质作用有限,碳化物仍然呈板状且尖角突出,碳化物尺寸稍有减小。经V-Ti变质处理后,高铬铸铁初生碳化物呈多边形状或条状,形貌和尺寸明显改善。其变质机理主要为V、Ti加入后增加了碳化物的异质形核核心,细化了碳化物。Al-Mg+V-Ti对高铬铸铁的变质效果最好,初生碳化物为细小的六边形,分布较为均匀,主要是Al-Mg净化铁液和V-Ti增加形核率共同作用的结果。 相似文献
4.
5.
《金属热处理》2015,(11)
采用Al-Mg、V-Ti和Al-Mg+V-Ti对3.81wt%C-15wt%Cr铸铁进行变质处理,研究不同变质剂对高铬铸铁初生碳化物的变质机理。结果表明,Al-Mg变质的机理主要表现为脱氧脱硫净化铁液,增加形核的过冷度。低密度的脱氧和脱硫产物在上浮过程中扰乱了液态原子排列,把碳化物形核温度推向了更低的温度,但Al-Mg对初生碳化物的变质作用有限,碳化物仍然呈板状且尖角突出,碳化物尺寸稍有减小。经V-Ti变质处理后,高铬铸铁初生碳化物呈多边形状或条状,形貌和尺寸明显改善。其变质机理主要为V、Ti加入后增加了碳化物的异质形核核心,细化了碳化物。Al-Mg+V-Ti对高铬铸铁的变质效果最好,初生碳化物为细小的六边形,分布较为均匀,主要是Al-Mg净化铁液和V-Ti增加形核率共同作用的结果。 相似文献
6.
7.
对高铬白口铸铁进行了孕育处理,探讨了高铬白口铸铁组织中碳化物形态的变化特征。研究结果表明:通过孕育处理,高铬白口铸铁中的一次碳化物形貌有明显改善,碳化物形貌为棒状,组织得到明显细化,表明该处理方法对高铬白口铸铁组织具有一定程度的改性作用。 相似文献
8.
9.
10.
11.
为了在竞争中获胜,欧洲造船业必须提高生产速度和效率,同时降低成本。因此,他们投入了巨大的人力和财力来研发激光焊接并将其应用到造船生产实践中,以达到维持和重建欧洲船厂在全球高附加值船舶市场的优势地位。 相似文献
12.
介绍的数值鼠标技术对提高视觉对色彩的分辨精度提供了一个非常好的解决方案。通常用于模拟凝固过程的动画AVI,类似于电影电视,缺乏互动能力,只能在固定的视场、视角下观看固定的序列画面。介绍的实时动画与实时拖动技术使用户在观察模拟结果时,在动画行进的同时,可以随意旋转、缩放、进格、退格等。 相似文献
13.
This article presents a paradigm for the mechanical properties of a metal that result from the plastic deformation that occurs
in forming processes, including multiple-step or cyclic processes. Some of the new concepts included are a new strength designation
that includes the sense (tensile or compressive), the direction (longitudinal, transverse, etc.), the specific type of deformation
(tensile, compressive, etc.); a concept of an equivalent strain; and the apparent rules of strain strengthening. Examples
of strength 相似文献
14.
15.
A.P. Ammosov G.S. Ammosov T.Sh. Aminov G.Yu. Il'in A.A. Antonov 《Welding International》2013,27(1):63-67
The design of ultrasonic butt welded joints in rigid plastics with additional compressive force is investigated. Two methods of introducing the energy of ultrasonic oscillations in the immediate vicinity of the welding zone with the tangential introduction of the oscillations and the relative displacement of the welded elements in the joint plane and welding with two-sided tangential introduction of the oscillations are discussed. 相似文献
16.
用EPS做模型,干砂造型在负压的状态下浇注碳钢,系统研究影响各种工艺条件下EPC法生产碳钢件内部增碳的因素。发现模型分别用石英粉、刚玉粉、锆英粉3种涂料涂覆,浇注碳钢件均有内部增碳现象发生,其中使用石英粉涂料的铸件内部增碳较小,采用底注式浇注,同一铸件随着铸件高度的增加,内部增碳增加。另外,随真空度的增加内部增碳减小。 相似文献
17.
18.
挤压铸造合金材料的研究进展 总被引:7,自引:9,他引:7
简述了合金材料压力下结晶的强化机理研究状况;讨论了挤压铸造铝合金、锌合金、镁合金及其复合材料的研究进展;指出合理的挤压铸造工艺可细化合金显微组织,提高铸件致密性,改善合金力学性能. 相似文献
19.
Progress in application of rare metals in superalloys 总被引:1,自引:0,他引:1
Rare metals play an important role in development of superalloys. Over the last two decades, the application of the rare metals in superalloys has achieved progress significantly. They present multi-beneficial effects for strengthening the matrix and the c0phase, increasing the lattice misfit, cleaning the grain boundary, improving the carbides and eutectics, refining the grain, stabilizing the oxidation film, etc., so that the elevated temperature rupture life and elevated temperature oxidation resistance are improved significantly, leading to a broad application in the superalloys. In order to meet the higher demand for better superalloys in the future, more intensive research is necessary on the effects of the rare metals on the superalloy, and especially on the combination effect of various rare metals and mutual influence among them. Utilization of the computational materials science and combinatorial high throughput experiment will be of importance in application of rare metals in superalloys. 相似文献
20.
钢中珠光体相变机制的研究进展 总被引:7,自引:1,他引:7
简要总结了钢中珠光体相变的机制,特别是珠光体形核的晶体学和长大的动力学。基于形核时的最小形核能和渗碳体与铁素体“合作”生长的要求,珠光体通常在奥氏体晶界形核并只向某一晶粒内生长,因而晶界珠光体与相邻晶粒存在特定取向关系而与生长进入的晶粒无特定取向关系。晶体学研究表明,珠光体形核的领先相与碳浓度及渗碳体与铁素体间的取向关系(分别为Pitsch-Petch、Bagaryatsky或lsaichev)无关。最近的研究发现,具Bl结构的非共格杂质粒子界面是过共析钢中晶内珠光体形核的有效位置,初步的结果表明,晶内珠光体形核的原因在于杂质粒子生长造成的局部区域碳贫化及低能的珠光体,杂质界面取代高能的奥氏体,杂质界面。特定过冷度下的层片间距与正向界面推移速率的关系是珠光体生长动力学的主要问题。基于珠光体与奥氏体间的无序界面假设和稳态扩散方程分别发展了以体扩散控制和以界面扩散控制为主的动力学理论。两种理论均与实验结果符合较好,但后者似更合理。最近的实验在珠光体中发现了生长台阶与结构台阶,表明生长动力学方程需要修正。 相似文献