共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
基于IR1150的有源功率因数校正电路的设计 总被引:1,自引:0,他引:1
本文研究了单周控制技术的原理及其在功率因数校正中的应用,分析了IR1150的工作原理,设计出输出电压为400V,功率为300W的主电路参数,并用PSIM软件对主电路进行了仿真。仿真结果表明,基于IR1150的有源功率因数校正电路可行。 相似文献
4.
5.
该文首先介绍了三相并联型有源电力滤波器的主电路和工作原理,然后分析了基于瞬时无功功率理论的ip—iq电流检测算法并对比研究了滞环比较和三角载波比较两种控制策略,据此建立了仿真模型并进行仿真研究。仿真结果和仿真试验波形验证了该方法的准确性和有效性。 相似文献
6.
7.
8.
有源功率校正技术(APFC)在解决开关电源功率因数方面得到了很好地应用。本文采用单相有源功率校正技术来提高开关电源的功率因数,主电路采用Boost型电路,控制采用电流模式控制的电压、电流双闭环。用Simulink软件对电路进行仿真分析,取得了很好的结果。 相似文献
9.
10.
11.
U?ur Çam Author Vitae 《Computers & Electrical Engineering》2004,30(2):147-151
A novel current-mode second-order notch filter configuration is proposed. The presented circuit uses single current differencing buffered amplifier (CDBA) and minimum passive components. High output impedance of the proposed filter enables the circuit to be cascaded without requiring any impedance matching device. It has also low passive sensitivities. The theoretical results are verified with PSPICE simulations. 相似文献
12.
Zhili Hao Wingfield B. Whitley M. Brooks J. Hammer J.A. 《Journal of microelectromechanical systems》2003,12(5):692-701
This paper presents a design methodology for a two-dimensional (2-D) electrostatic torsion micromirror fabricated with bulk-micromachining technology. The theoretical models in mechanical and electrostatic fields presented here provide insights into the influences of different design parameters on micromirror performance. Parametric numerical models built in ANSYS are used to more accurately predict its performance and further refine the design parameter values derived from the theoretical models. By use of the electrical analogy method, an equivalent electrical circuit is built in PSPICE to predict the static and dynamic performance of this micromirror, with the numerical simulation results as the input parameters. The equivalent electrical circuit has been demonstrated to be a simple and powerful approach to characterize the performance of this 2-D torsion micromirror. The test results for this micromirror reveal very good agreement between experimental and numerical results, taking into account fabrication tolerances and experimental accuracies. Incorporating the fabrication tolerances of bulk-micromachining technology, this design methodology can be readily applied to performance characterization and design optimization. 相似文献
13.
柔性交流输电系统(FACTS)技术的出现,为提高电网的可控性与可靠性提供了更新更有效的方法,已经成为近年来电力系统所研究的前沿课题之一。静止无功补偿器(SVC)和可控串联补偿器(TCSC)做为FACTS装置中应用最广泛的重要组成成员,是提高电力系统稳定性最有效的工具。因此,研究SVC与TCSC在电力系统中的应用具有非常重要的理论意义和实用价值。本文研究TCSC、SVC的特性,推导出它们的参数模型。通过Matlab软件,建立了SVC与TCSC两种FACTS装置的仿真模型。TCSC为串联补偿装置,通过连续改变其等效阻抗,从而改变输电线路上的串补程度;SVC为并联补偿装置,改善系统的功率因数。通过改变晶闸管的触发角,对晶闸管进行控制。 相似文献
14.
PSPICE软件在控制系统仿真过程中的应用 总被引:2,自引:0,他引:2
本文讨论了电子电子电路辅助分析软件PSPICE在自动控制仿真中的应用,给出了仿真方法,通过举例,说明了该软件可以成功地应用于控制系统仿真,在科研,生产和教学中具有广泛的应用前景和推广价值。 相似文献
15.
为了研究采用多目标控制的静止无功发生器对电力系统的调节作用,建立了基于MATLAB的静止无功发生器的仿真模型。以含有静止无功发生器的单机无穷大系统为例,结合多目标控制方法,用S—Function仿真分析了静止无功发生器在系统暂态故障过程中的调节作用。仿真结果验证了所设计的多目标控制器的正确性以及该无功发生装置仿真模型的有效性。 相似文献
16.
Selçuk K?l?nç Author Vitae U?ur Çam Author Vitae 《Computers & Electrical Engineering》2005,31(6):391-401
A new voltage-mode filter configuration is proposed. The presented topology uses single operational transresistance amplifier (OTRA) and can realize first-order allpass, second-order allpass and notch filtering functions. The proposed circuits are insensitive to parasitic capacitances and resistances due to internally grounded input terminals of OTRA. Low output impedance of the configuration enables the circuits to be cascaded without additional buffers. The theoretical results are verified with PSPICE simulations using a CMOS realization of OTRA. Experimental work is also carried out. The feasibility of the proposed first-order allpass filter is illustrated on the design of a quadrature oscillator. 相似文献
17.
本文利用多项式矩阵方法,讨论了采用输入——输出反馈补偿器和串联补偿器解耦的有关问题。这些问题是:系统可以解耦的充分必要条件,解耦系统的可控性、可观测性和稳定性,以及解耦系统的极——零点配置等问题。最后,将这种解耦方法和状态反馈解耦进行了比较。 相似文献
18.
19.
20.
电网中的主要设备都是感性负载,这就要求电源必须提供无功功率。本文论述了一种DSP控制的新型固态无功功率补偿器,它基于离散傅立叶变换(DFT)的谐波检测方法。该系统采用自身控制的直流电压供电方式,其无功功率的补偿是靠DSP控制逆变器的输出以一个固定的开关频率跟踪一个正弦参考波形而实现的,从而使用户侧的功率因数接近为1,同时极大地抑制了高次谐波,实验结果证明了理论分析的正确性。 相似文献