Capacity, throughput, and delay of slotted ALOHA DS-CDMA links with adaptive space-time auxiliary-vector receivers

We investigate the user capacity, throughput, and delay characteristics of a mobile slotted ALOHA direct-sequence code-division-multiple-access (DS-CDMA) link with dedicated signatures under multipath fading and packet-rate adaptive antenna array signal reception. For a given system transmission bit rate, the packet size is designed to be sufficiently small to conform with the coherence time of the channel. Then, on an individual packet-by-packet basis, a phase-ambiguous spatial-temporal channel estimate is produced by a blind (unsupervised) eigensubspace procedure. The space-time channel estimate is phase corrected via a few pilot packet mid-amble bits and used for joint spatial-temporal multiple-access-interference suppression according to the principles of auxiliary-vector filtering. Subsequently, packet success probabilities are derived in the presence or absence of forward error correction and are used to evaluate the throughput and delay characteristics of the link.     

FDTD modeling of lumped ferrites

Implementing ferrites in finite-difference time-domain (FDTD) modeling requires special care because of the complex nature of the ferrite impedance. Considerable computational resources and time are required to directly implement a ferrite in the FDTD method. Fitting the ferrite impedance to an exponential series with the generalized-pencil-of-function (GPOF) method and using recursive convolution is an approach that minimizes the additional computational burden. An FDTD algorithm for a lumped ferrite using GPOF and recursive convolution is presented herein. Two different ferrite impedances in a test enclosure were studied experimentally to demonstrate the FDTD modeling approach. The agreement is generally good     

时隙ALOHA DS/CDMA系统与多载波时隙ALOHA系统吞吐性能的比较研究

该文对同样带宽下时隙 ALOHA DS/CDMA系统和多载波时隙 ALOHA系统的吞吐量进行了理论计算、比较和仿真。结果表明,在总负载较大时,采用高纠错能力的时隙 ALOHA DS/CDMA系统可以在吞吐量上有更好的性能。但若网络负载过重,时隙ALOHA DS/CDMA系统的吞吐性能较多载波时隙ALOHA的系统下降快;码字总数受限会带来码字选择的冲突,从而降低系统的吞吐性能。     

Dynamic bandwidth allocation on a slotted ring with integratedservices

The authors discuss what they consider the fundamental issue of bandwidth allocation on an integrated local area network. An approach is introduced for dynamic bandwidth allocation which is based on traffic prediction concepts. It is especially well suited for real-time services such as video and voice. Using a control model two allocation schemes are proposed: the first is based on an analytical model of the traffic flow; the second is a simpler version that can be easily implemented on very high-speed systems. The results of simulation studies indicate a marked improvement in performance. The presented approach is especially effective when used in systems with large transmission path latencies as the network performance does not deteriorate with increasing latency. This is very useful if the network is to be used as a metropolitan area network     

A novel high-speed ring oscillator for multiphase clock generationusing negative skewed delay scheme

A high-speed ring oscillator is proposed for improved operation frequency over those based on the conventional n-stage inverter chain. The ring oscillator consists of inverters with negative delay elements that are derived from the ring oscillator circuit. The cell delay of the ring oscillator is smaller than a fundamental inverter delay. Simulations show that the resulting operating frequencies are 50% higher than those obtainable from the conventional approaches     

Relation between transmission and throughput of slotted ALOHA localpacket radio networks

A new method for the exact calculation of the throughput of a centralized slotted ALOHA packet radio network over slow Rayleigh-fading channels is presented and the results are compared with the computer simulations. Also, upper and lower bounds on the performance are provided. The effects of capture on the throughput of the system are related to the modulation and coding technique, signal to noise ratio of the received signal, general terminal distribution in the area, and the length of the transmitted packets. The binary phase shift keying (BPSK), coherent and noncoherent binary frequency shift keying (FSK) modulations and BCH coding are considered for the exact calculations. The results of the analysis show that the maximum average throughput of the slotted Aloha packet radio network is around 60% rather than 36% predicted from the simplified analysis. In contrast with some previous reports, it is shown that the throughput of the system is not affected significantly by the use of coding or the change of packet lengths     

Frequency response of a lumped delay line having frequency-dependent series resistance

A method is described for obtaining the theoretical frequency response of a lumped delay line having inductors with frequency-dependent series resistance. Good agreement is obtained with experimental results.     

Efficient QoS support in a slotted multihop WDM metro ring

A novel distributed access protocol for a slotted wavelength-division-multiplexing (WDM) metro ring employing all-optical packet switching and supporting quality-of-service (QoS) classes is presented and analyzed. Since we assume that there are more nodes than available wavelengths in the network, we obtain a scalable multihop WDM ring as underlying network architecture. By dividing each channel into several time slots and further applying destination release and slot reuse, data packets can be efficiently transmitted and received in a statistically multiplexed manner. In our architecture, each node is equipped with one tunable transmitter and one fixed-tuned receiver. Furthermore, as we generally consider so-called a posteriori access strategies, different packet selection schemes are proposed and compared. An analytical model based on the semi-Markov process methodology is developed to quantify the performance of one of these schemes. As a key element of the protocol, an efficient QoS support access mechanism is proposed and its performance is evaluated. The new QoS control scheme adopts a frame-based slot reservation strategy including connection setup and termination, which only slightly increases the signaling and node processing overhead. Thus, an efficient hybrid protocol combining connectionless and connection-oriented packet transmissions is proposed     

Performance analysis of slotted ring protocols in HSLANs

The performance of a number of slotted-ring protocols supporting integration of synchronous and asynchronous traffic in high-speed local area networks (HSLANs) is evaluated. They are the Cambridge fast ring, a variant of the Cambridge fast ring, and Orwell. The performance of their basic access mechanisms is compared and contrasted with that of the multiple-token ring. The effect of a uniframe scheme for supporting synchronous traffic is examined. A delay analysis of the integrated-services slotted-ring protocols is presented     

Stability and delay of finite-user slotted ALOHA with multipacket reception

The effect of multipacket reception (MPR) on stability and delay of slotted ALOHA based random-access systems is considered. A general asymmetric MPR model is introduced and the medium-access control (MAC) capacity region is specified. An explicit characterization of the ALOHA stability region for the two-user system is given. It is shown that the stability region undergoes a phase transition from a concave region to a convex polyhedral region as the MPR capability improves. It is also shown that after this phase transition, slotted ALOHA is optimal i.e., the ALOHA stability region coincides with the MAC capacity region. Further, it is observed that there is no need for transmission control when ALOHA is optimal i.e., ALOHA with transmission probability one is optimal. Next, these results are extended to a symmetric N>2 user ALOHA system. Finally, a complete characterization of average delay in capture channels for the two-user system is given. It is shown that in certain capture scenarios, ALOHA with transmission probability one is delay optimal for all stable arrival rates. Further, it is also shown that ALOHA with transmission probability one is optimal for stability and delay simultaneously in the two-user capture channel.     

Large-signal lumped modeling and characterization of an IMPATT diode

An accurate large-signal lumped model of a Read IMPATT diode and external circuit is developed. The equations in state-space form are solved on an 8K-word computer, allowing complete interaction between the operator and the machine. Results obtained agree closely with measurement.     

Analysis and modeling of upstream throughput in multihop packet CDMA cellular networks

We consider the problem of throughput modeling of wireless multihop packet CDMA networks with cellular overlay using simple forwarding strategies in the upstream. Considering the effect of shadowing and distance-dependent path loss, we approximate the probability density of interference at each base station (BS) and compare numerical and simulation results for different path-loss parameters. We derive the probability density of the received power at each BS due to transmission of one packet from a random node, as well as the probability distribution of the number of packets received at each node per time slot. Subsequently, we use the above results to approximate the probability density of the total received power at each BS based on calculations of moments. We observe that the probability density of intercell interference due to transmissions from terminals and routers may be approximated by normal and log-normal densities, respectively. We quantify the network performance based on throughput, total consumed power, and outage probability for different system parameters. For homogeneous link efficiencies, introducing routers into the network while reducing the transmission power increases the mean and variance of interference to the desired signal, hence higher outage probability. However, there are ample opportunities inherent to multihop structure, applicable to any of the physical, data link, and network layers, which help increase the overall achievable network throughput.     

Minimization of delay and crosstalk in high-speed VLSIinterconnects

Design optimization of time responses of high-speed VLSI interconnects modeled by distributed coupled transmission line networks is presented. The problem of simultaneous minimization of crosstalk, delay and reflection is formulated into minimax optimization. Design variables include physical/geometrical parameters of the interconnects and parameters in terminating/matching networks. A recently published simulation and sensitivity analysis technique for multiconductor transmission lines is expanded to directly address the VLSI interconnect environment. The new approach permits efficient physical/geometrical oriented interconnect design using exact gradient based minimax optimization. Examples of interconnect optimization demonstrate significant reductions of crosstalk, delay, distortion and reflection at all vital connection ports. The technique developed is an important step towards optimal design of circuit interconnects for high-speed digital computers and communication systems     

A memory-based high-speed digital delay line with a largeadjustable length

The digital delay line concept is based on a dynamic three-transistor cell memory, with pointer access and offers high operating frequency, large maximum length, and low power dissipation. The adjustable delay requires only a small overhead for control logic. An experimental chip with 60 K transistors, which utilizes this concept, has been built in a 1.5-μm CMOS technology. The adjustable delay ranges from 1 to 4096 clock cycles for a 4-bit-wide data word. Correct operation of the chip has been verified for clock frequencies in the range of 3 kHz to 30 MHz. Therefore the circuit is suitable for audio as well as video applications     

LTE多用户下行吞吐量性能建模分析

针对LTE系统中多用户下行吞吐量难以预测的问题,从LTE 系统的时域和频域资源出发,结合用户位置、终端类型以及下行MIMO模式等内容,分析了多用户条件下时域和频域调度算法的特点、影响因素和作用过程。并在此基础上建立了多用户下行吞吐量分析和估算模型,进而应用此模型对具体实例进行了预测和分析,从而对多用户性能分析工作起到一定的指导作用。     

Output and delay of multi-channel slotted ALOHA systems for integrated voice and data transmission

Packet-switched technology has been developed to offer personal communication services not only for data but also for different types of user-end equipment such as phone-type audio. To satisfy the huge service demand and multi-traffic requirements with limited bandwidth, this paper proposes an efficient procedure of multi-channel slotted ALOHA for integrated voice and data transmission in wireless information networks and presents an exact analysis with which to numerically evaluate the performance of the systems. A channel reservation policy is applied, where a number of channels (called reserved channels) are used exclusively by voice packets, while the remaining channels are used by both voice and data packets, and voice packets select the reserved channels with a given probability (called selection probability). Probability distributions for the numbers of voice and data departures and for the data packet delay are derived. Numerical results compare some cases with different numbers of channels, different numbers of reserved channels and different selection probabilities to discuss what effects they may have on channel utilization, loss probability, average packet delay, coefficient of variation of data packet delay, and correlation coefficient of packet departures. This revised version was published online in June 2006 with corrections to the Cover Date.     

Metro WDM networks: performance comparison of slotted ring and AWG star networks

Both wavelength-division-multiplexing (WDM) networks with a ring architecture and WDM networks with a star architecture have been extensively studied as solutions to the ever increasing amount of traffic in the metropolitan area. Studies typically focus on either the ring or the star and significant advances have been made in the protocol design and performance optimization for the WDM ring and the WDM star, respectively. However, very little is known about the relative performance comparisons of ring and star networks. In this paper, we conduct a comprehensive comparison of a state-of-the-art WDM ring network with a state-of-the-art WDM star network. In particular, we compare time-slotted WDM ring networks (both single-fiber and dual-fiber) with tunable-transmitter and fixed-receiver (TT-FR) nodes and an arrayed-waveguide grating-based single-hop star network with tunable-transmitter and tunable-receiver (TT-TR) nodes. We evaluate mean aggregate throughput, relative packet loss, and mean delay by means of simulation for Bernoulli and self-similar traffic models for unicast traffic with uniform and hot-spot traffic matrices, as well as for multicast traffic. Our results quantify the fundamental performance characteristics of ring networks versus star networks and vice versa, as well as their respective performance limiting bottlenecks and, thus, provide guidance for directing future research efforts.     

Rigorous modeling of high-speed semiconductor devices

We present a review of industrial heterostructure devices based on SiGe/Si and III–V compound semiconductors analyzed by means of numerical simulation. A comparison of device simulators and current transport models is given and critical modeling issues are addressed. Results from two-dimensional hydrodynamic analyses of heterojunction bipolar transistors (HBTs) are presented in good agreement with measured data. The examples are chosen to demonstrate technologically relevant issues which can be addressed by device simulation.     

Moment computation of lumped and distributed coupled RC trees withapplication to delay and crosstalk estimation

In today's deep submicrometer technology the coupling capacitances among individual on-chip RC trees have an essential effect on the signal delay and crosstalk, and the interconnects should be modeled as coupled RC trees. In this paper we provide simple exact explicit formulas for the Elmore delay and higher order voltage moments and a linear order recursive algorithm for the voltage moment computation for lumped and distributed coupled RC trees. By using the formulas and algorithms, the moment-matching method can be efficiently implemented to deal with delay and crosstalk estimation, model order reduction, and optimal design of interconnects. As an application of the algorithm, we provide a new efficient and accurate model for crosstalk estimation in coupled RC trees. Simulation results show it works better than existing methods