Luminescence Study of LiY<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Eu<Subscript>x</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The luminescence spectra of LiY_{1 − x} Eu_x(MoO₄)₂ (x = 0.0005, 0.001, 0.01, 0.05, 0.1, 0.5, 1) scheelite solid solutions are measured under laser excitation at 337.1 nm. The effect of Eu³⁺ concentration on the luminescence behavior of the solid solutions is examined. The highest integrated emission intensity is offered by LiY_0.5Eu_0.5(MoO₄)₂. Eu³⁺ substitution for Y³⁺ has no effect on the symmetry of the emission centers involved. Eu³⁺ is shown to occupy only one site in the structure of the solid solutions. X-ray diffraction and luminescence data indicate that all of the solid solutions have an undistorted scheelite structure.__________Translated from Neorganicheskie Materialy, Vol. 41, No. 7, 2005, pp. 871–875.Original Russian Text Copyright © 2005 by Zaushitsyn, Mikhailin, Romanenko, Khaikina, Basovich, Morozov, Lazoryak.     

Ce and Eu activated Na<Subscript>2</Subscript>Zn<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>4</Subscript>, a new promising novel phosphor

A new efficient phosphor, Eu²⁺/Eu³⁺ and Ce³⁺ activated Na₂Zn₅(PO₄)₄ has been synthesized by solid-state reaction technique at high temperature. X-ray powder diffraction analysis confirmed the formation of Na₂Zn₅(PO₄)₄ host lattice. Scanning electron microscopy indicated that the microstructure of the phosphor consisted of irregular fine grains with a size of about 0·5–2 μm. Photoluminescence excitation spectrum measurements of Ce³⁺ activated Na₂Zn₅(PO₄)₄ show that the phosphor can be efficiently excited by UV-Vis light from 280 to 310 nm to realize emission in the visible (blue) range due to the 5d-4f transition of Ce³⁺ ions which is applicable for scintillation purpose, whereas Eu²⁺/Eu³⁺ activated Na₂Zn₅(PO₄)₄ phosphor emits blue, green and red emission spectrum shows at 487 nm, 546 nm with a dominant peak at 611 nm respectively, due to Eu²⁺/Eu³⁺ ions which is promising candidate for solid state lighting. Therefore, newly synthesised, by low cost and easy technique prepared, novel phosphors may be useful as RGB phosphor for solid state lighting application.     

Luminescence properties of Bi codoped and P codoped Ca<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript>

New red emitting phosphors, Ca₃(VO₄)₂:Eu³⁺,Bi³⁺, Ca₃((P,V)O₄)₂:Eu³⁺ were synthesized by low temperature solid-state reaction and characterized by X-ray diffraction, scanning electron microscopy, photoluminescence spectra and Fourier transform infrared spectroscopy. The results show that the red emission located at about 613 nm was ascribed to ⁵ D ₀-⁷ F ₂ transition of Eu³⁺. The effect of by Bi doping and by P doping was also investigated systematically.     

High-temperature heat capacity and vibrational spectra of Eu<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Eu₂Sn₂O₇ compound has been prepared by solid-state reaction (by sequentially firing a stoichiometric mixture of Eu₂O₃ and SnO₂ in air at 1273 and 1473 K) and its heat capacity has been determined by differential scanning calorimetry in the temperature range 370–1000 K. The heat capacity data have been used to evaluate the thermodynamic properties of europium stannate: enthalpy increment H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and reduced Gibbs energy Ф°(T). Raman spectra of Eu₂Sn₂O₇ polycrystals with the pyrochlore structure have been measured in the range 200–1200 cm^–1.     

Synthesis and High-Temperature Heat Capacity of Sm<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript> and Eu<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Sm₂Ge₂O₇ and Eu₂Ge₂O₇ germanates have been prepared by solid-state reactions via multistep firing of stoichiometric mixtures of Sm₂O₃ (Eu₂O₃) and GeO₂ in air at temperatures from 1273 to 1473 K. The molar heat capacity of the samarium and europium germanates has been determined by differential scanning calorimetry in the range 350–1000 K and the C _p (T) data have been used to evaluate their thermodynamic properties.     

Synthesis,photoluminescence and mechanoluminescence properties of Eu<Superscript>3+</Superscript> ions activated Ca<Subscript>2</Subscript>Gd<Subscript>2</Subscript>W<Subscript>3</Subscript>O<Subscript>14</Subscript> phosphors

A new series of Eu³⁺ ions-activated calcium gadolinium tungstate [Ca₂Gd₂W₃O₁₄] phosphors were synthesized by conventional solid-state reaction method. The X-ray diffraction patterns of the powder samples indicate that the Eu³⁺: Ca₂Gd₂W₃O₁₄ phosphors are of tetragonal structure. The prepared phosphors were well characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL), and mechanoluminescence (ML) spectra. PL spectra of Eu³⁺: Ca₂Gd₂W₃O₁₄ powder phosphors have shown strong red emission at 615 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ _exci = 392 nm (⁷F₀ → ⁵L₆). The energy transfer from tungstate groups to europium ions has also reported. Mechanoluminescence studies of Eu³⁺: Ca₂Gd₂W₃O₁₄ phosphors have also been explained systematically.     

The influence of activation of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> polycrystalline matrices by Bi<Superscript>3+</Superscript> ions on the luminescence of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript>

The influence of activation of the Y₂O₃ matrix of the Y₂O₃:Eu³⁺ phosphor by Bi³⁺ ions on the luminescence of Eu³⁺ and Bi³⁺ ions in it and on conditions of the excitation energy transfer to luminescence centers is studied. It is shown that the presence of Bi³⁺ ions leads to the appearance of recombination luminescence with participation of bismuth ions at low concentrations (up to 6–8 at %) of the dominant activator europium and to an increase in the threshold of intrinsic concentration quenching of its luminescence.     

Effect of secondary heat treatment on the spectroscopic properties of Na<Subscript>2</Subscript>O-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

We have studied the optical absorption and luminescence spectra of 45Na₂O · xNb₂O₅ · (55 − x)P₂O₅ glasses containing 5, 10, 20, 25, 30, and 35 mol % Nb₂O₅. The results indicate that the absorption band around 26000 cm⁻¹, responsible for the yellow color of the glasses, is due to the [Nb^(5+)--O⁻] center and disappears upon secondary heat treatment. Heat treatment of europium-doped glasses increases the concentration of Eu³⁺ centers in an asymmetric environment, which is accompanied by an increase in luminescence efficiency. The reason for this is that the Eu³⁺ ions are located outside the niobate subsystem of the glass matrix. The europium in the glasses studied acts as a protector ion.     

Single phased Sr<Subscript>3</Subscript>La(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript>/Mn<Superscript>2+</Superscript> phosphors: solid state synthesis,tunable luminescence and potential applications in white light LEDs

A series of Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors were synthesized by a solid state reaction. The phase and the optical properties of the synthesized phosphors were investigated. The XRD results indicate that the doped Eu²⁺ and Mn²⁺ ions do not change the phase of Sr₃La(PO₄)₃. The peak wavelengths of Eu²⁺ single doped and Eu²⁺/Mn²⁺ codoped Sr₃La(PO₄)₃ phosphors shift to longer wavelength due to the larger crystal field splitting for Eu²⁺ and Mn²⁺. The increases of crystal field splitting for Eu²⁺ and Mn²⁺ are induced by the substitution of Sr²⁺ by Eu²⁺ and Mn²⁺ in Sr₃La(PO₄)₃ host. Due to energy transfer from Eu²⁺ to Mn²⁺ in Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors, tunable luminescence was obtained by changing the concentration of Mn²⁺. And the white light was emitted by Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/4.0 mol%Mn²⁺ and Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/5.0 mol%Mn²⁺ phosphors.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

Color-tunable luminescence properties of Sm<Superscript>3+</Superscript>/Dy<Superscript>3+</Superscript> co-doped NaLa(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> phosphors and their energy transfer mechanism

The Sm³⁺, Dy³⁺ doped and Sm³⁺/Dy³⁺ co-doped NaLa(MoO₄)₂ spherical phosphors were hydrothermally synthesized by the EDTA-2Na mediated method. Under the excitation of 297 nm, the quenching concentration of Sm³⁺ in NaLa(MoO₄)₂ host was determined to be 13%, and the concentration quenching mechanism was discussed to be the electric quadrupole–quadrupole interaction. After Sm³⁺ and Dy³⁺ ions were co-doped into the NaLa(MoO₄)₂ host, the energy transfer behaviors resulted from Dy³⁺ to Sm³⁺ ions were investigated by the help of the luminescent spectra of the obtained phosphors. By varying co-doping concentrations of Sm³⁺/Dy³⁺ ions, the emission color of NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ can be tuned from reddish-orange, pink and white to bluish-green. The CIE chromaticity coordinate, the correlated color temperature and the quantum efficiency of NaLa_0.87(MoO₄)₂:1%Sm³⁺, 12%Dy³⁺ were calculated to be (0.356, 0.320), 4353 K and 20%, respectively. Furthermore, in the temperature-dependent analysis, it presented good thermal stability, which can become a promising single-phased white-emitting phosphor for white LEDs devices. Based on these results, the possible energy transfer mechanism between Dy³⁺ and Sm³⁺ in NaLa(MoO₄)₂:Sm³⁺/Dy³⁺ was also proposed.     

Hydrothermal synthesis of NaLa(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Eu<Superscript>3+</Superscript> octahedrons and tunable luminescence by changing Eu<Superscript>3+</Superscript> concentration and excitation wavelength

NaLa(WO₄)₂:Eu³⁺ phosphors with different Eu³⁺ concentrations have been synthesized by a hydrothermal method. The phase is confirmed by XRD analysis, which shows a pure-phase NaLa(WO₄)₂ XRD pattern for all of NaLa(WO₄)₂:Eu³⁺ phosphors. The SEM and TEM images indicate that all of NaLa(WO₄)₂:Eu³⁺ phosphors have a octahedral morphology. These suggest that the Eu³⁺ doping has no influence on the structure and growth of NaLa(WO₄)₄ particles. By monitoring the emission of Eu³⁺ at 615 nm, NaLa(WO₄)₂:Eu³⁺ phosphors show excitation bands originating from both host and Eu³⁺ ions. Under the excitation at 271 nm corresponding to WO₄ ^2? groups, emission bands coming from the ¹A₁ → ³T₁ transition with the WO₄ ^2? groups and the ⁵D₀ → ⁷F_j (j = 0, 1, 2, 3 and 4) transitions of Eu³⁺ are observed. The emission intensity relating to WO₄ ^2? groups decreases with increasing Eu³⁺ concentration. But emission intensities of Eu³⁺ increase firstly and then decreases because of concentration quenching effect. Under the excitation at 395 nm corresponding to ⁷F₀ → ⁵L₆ transition of Eu³⁺, only characteristic Eu³⁺ emission bands can be observed. The results of this work suggest that tunable luminescence can be obtained for Eu³⁺ doped NaLa(WO₄)₂ phosphors by changing Eu³⁺ concentration and excitation wavelength.     

A novel red phosphor for near UV InGaN light-emitting diode and its luminescent properties

A series of new red phosphors, NaEu(MoO₄)_2−2x(SO₄)_2x, were prepared by the conventional solid state reaction. Their excitation spectra, emission spectra and decay curves were measured at room temperature. When the SO₄²⁻ content is in excess of 20%, other phases appear. With the introduction of SO₄²⁻, the Mo-O charge transfer band of NaEu(MoO₄)_2−2x(SO₄)_2x shows red shift, and the excitation intensities of the 4f - 4f transitions of Eu³⁺ are strengthened, compared with that of NaEu(MoO₄)₂. The single red light-emitting diodes-based these phosphors were fabricated. The light-emitting diode fabricated with the phosphor NaEu(MoO₄)_1.80(SO₄)_0.20 exhibited higher red emission relative to that with NaEu(MoO₄)₂. Bright red light can be observed by naked eyes from the light-emitting diode-based NaEu(MoO₄)_1.80(SO₄)_0.20.     

Photoluminescence properties and charge compensation investigations of novel orange-emitting Eu<Superscript>3+</Superscript> doped Na<Subscript>4</Subscript>Ca<Subscript>4</Subscript>(Si<Subscript>6</Subscript>O<Subscript>18</Subscript>) phosphors

A series of polycrystalline Na₄Ca₄(Si₆O₁₈):Eu³⁺ orange emitting phosphors were synthesized by a conventional high-temperature solid-state reaction. The phase formation was confirmed by X-ray power diffraction analysis. The excitation spectra show a strong host absorption indicating an efficient energy transfer process from O^2? to Eu³⁺ ions. Upon NUV radiation, the phosphors showed strong red emission around 610 nm (⁵D₀ → ⁷F₂) and orange emission around 591 nm (⁵D₀ → ⁷F₁), but the ⁵D_1,2,3 emission nearly can not be seen. Compared with the luminescence properties of Li⁺, Na⁺, and K⁺ co-doped samples, we deduced that Na⁺ ions probably prefer to dope into the intrinsic Na vacancies rather than Ca²⁺ ions vacancies in Na₄Ca₄(Si₆O₁₈) crystal. Thermal stability properties, quantum efficiency and chromaticity coordinates of the phosphors have been investigated for the potential application in white LEDs.     

Effect of Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> doping on the crystallization behavior of BaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

We gave studied the crystallization behavior of 30BaO · 25Bi₂O₃ · 45B₂O₃ glasses doped with Eu₂O₃ to different levels. At a Eu₂O₃ content of 7 mol % or higher, the glasses undergo volume crystallization. The only precipitating phase is a solid solution between europium and bismuth oxides. With increasing europium concentration in the glass, the structure of the crystallites changes from cubic to rhombohedral. We have investigated the morphology, physicochemical properties, and luminescence spectra of the glasses and glass-ceramics.     

Microwave synthesis and luminescence properties of YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript>

Europium-doped YVO₄ phosphors have been synthesized using microwave radiation of 700 W power. The uniformity and high rate of microwave heating, as well as “nonthermal” effects of microwave radiation, considerably accelerate the decomposition of precursors and YVO₄:Eu³⁺ synthesis. The europium concentration was varied from 1 to 8 at %. The luminescence intensity of YVO₄:Eu³⁺ was shown to depend on Eu³⁺ concentration, with a maximum at 8 at % Eu³⁺. According to transmission electron microscopy data, the synthesized phosphors consist of nanoparticles 6 to 8 nm in size, with an appreciable degree of agglomeration.     

Synthesis,crystal structure and luminescence in Ca<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript>

Bluish green emitting phosphor, Ca₃Al₂O₆:Ce³⁺, is prepared by low-temperature combustion method. X-ray diffraction, photoluminescence, scanning electron microscopy techniques are used to characterize the synthesized phosphor. The most efficient bluish green (483 nm) emission is observed under the excitation by near UV light. The emission characteristics are credited to 5d → 4f type transitions in Ce³⁺. The luminescence properties of Eu²⁺ are predicted for the first time from those of Ce³⁺. Also, photoluminescence of Eu³⁺ is studied in the same host. The emission spectrum of Ca₃Al₂O₆:Eu³⁺ shows the peak at 592 (orange) and 614 nm (red) wavelengths. Ca₃Al₂O₆:Ce³⁺phosphor can be a potential blue phosphor for field emission display, solid-state lighting and LED.     

Polycrystalline materials in MoO<Subscript>3</Subscript>–ZrO<Subscript>2</Subscript>–V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Melt quenching technique was applied to study tendency for phase formation and amorphization in the MoO₃–ZrO₂–V₂O₅ system. By X-ray diffraction were detected the main crystalline phases separated during the quenching: Zr(MoO₄)₂, V₂MoO₈, (Mo_0.3V_0.7)₂O₅, V_0.95Mo_0.97O₅ but in a wide concentration range the dominant crystalline phase was monoclinic ZrO₂. The average particle sizes of the obtained crystal phases were in the range 30–50 nm. A narrow glass formation area was situated, near MoO₃–V₂O₅ side. The glass-crystalline samples were obtained in the MoO₃- and V₂O₅-rich compositions. The phase formation was proven by IR analysis also. IR data showed that the main structural units built up the glass network are corner shared VO₅ and MoO₆ groups while in the corresponding crystal V₂MoO₈ phase MeO₆ (Me = V, Mo) octahedra are corner and edge shared (band at 580 cm⁻¹).     

Synthesis and luminescence properties of a novel Eu<Superscript>3+</Superscript>, Tb<Superscript>3+</Superscript> co-doped Al<Subscript>18</Subscript>B<Subscript>4</Subscript>O<Subscript>33</Subscript> whiskers by a gel nano-coating method

Al₁₈B₄O₃₃:Eu³⁺, Tb³⁺ whiskers have been successfully prepared by a simple gel nano-coating method using aluminum isopropoxide as the starting materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), and thermogravimetric analysis (TGA) were used characterize the samples. The results show coexistence of the crystal phase Al₁₈B₄O₃₃, amorphous phase, and Eu³⁺, Tb³⁺ ions of the samples with initial addition Al/B ratios from 3 to 1 are incorporated into the amorphous phase. The Al₁₈B₄O₃₃:Eu³⁺, Tb³⁺ whiskers are very straight with an average diameter of 600 nm and lengths ranging from 5 to 10 μm. Under ultraviolet excitation at 365 nm, samples show mainly exhibit the characteristic emission of Eu³⁺ corresponding to \( ^{ 5} {\text{D}}_{ 0} \to {\text{F}}_{ 1 , 2} \) transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺.     

Photoluminescence properties of a novel red-emitting phosphor Ba<Subscript>2</Subscript>LaV<Subscript>3</Subscript>O<Subscript>11</Subscript>:Eu<Superscript>3+</Superscript>

Ba₂LaV₃O₁₁:Eu³⁺ phosphors were firstly synthesized by the traditional solid-state reaction method at 1100 °C. Their luminescence properties were investigated by photoluminescence excitation and emission spectra. The excitation spectrum shows a broad band centered at about 275 nm in the region from 200 to 370 nm, which is attributed to an overlap of the charge transfer transitions of O^2??→?V⁵⁺ and O^2??→?Eu³⁺. The phosphors exhibit the red emissions of Eu³⁺ and the emission intensity ratio of ⁵D₀?→?⁷F₂ to ⁵D₀?→?⁷F₁ is dependent on the Eu³⁺ concentration due to an environment change about Eu³⁺ ions. Concentration quenching occurs at 30 mol% in the phosphors and exchange interaction is its main mechanism. Ba₂LaV₃O₁₁:Eu³⁺ displays tunable CIE color coordinates from yellow orange to red depended on Eu³⁺ content, which may have a potential application for illuminating and display devices.