Operation strategies guideline for packed bed thermal energy storage systems

Packed bed thermal energy storage (TES) systems have been identified in the last years as one of the most promising TES alternatives in terms of thermal efficiency and economic viability. The relative simplicity of this storage concept opens an important opportunity to its implementation in many environments, from the renewable solar‐thermal frame to the industrial waste heat recovery. In addition, its implicit flexibility allows the use of a wide variety of solid materials and heat transfer fluids, which leads to its deployment in very different applications. Its potential to overcome current heat storage system limitations regarding suitable temperature ranges or storage capacities has also been pointed out. However, the full implementation of the packed bed storage concept is still incomplete since no industrial scale units are under operation. The main underlying reasons are associated to the lack of a complete extraction of the full potential of this storage technology, derived from a successful system optimization in terms of material selection, design, and thermal management. These points have been evidenced as critical in order to attain high thermal efficiency values, comparable to the state‐of‐the‐art storage technologies, with improved technoeconomic performance. In order to bring this storage technology to a more mature status, closer to a successful industrial deployment, this paper proposes a double approach. First, a low‐cost by‐product material with high thermal performance is used as heat storage material in the packed bed. Second, a complete energetic and efficiency analysis of the storage system is introduced as a function of the thermal operation. Overall, the impact of both the selected storage material and the different thermal operation strategies is discussed by means of a thermal model which permits a careful discussion about the implications of each TES deployment strategy and the underlying governing mechanisms. The results show the paramount importance of the selected operation method, able to increase the resulting cycle and material usage efficiency up to values comparable to standard currently used TES solutions.     

A review on thermal energy storage systems in solar air heaters

The drying needs of agricultural, industrial process heat requirements and for space heating, solar energy is one of the prime sources which is renewable and pollution free. As the solar energy is inconsistent and nature dependent, more often there is a mismatch between the solar thermal energy availability and requirement. This drawback could be addressed to an extent with the help of thermal energy storage systems combined with solar air heaters. This review article focuses on solar air heaters with integrated and separate thermal energy storage systems as well as greenhouses with thermal storage units. A comprehensive study was carried out in solar thermal storage units consisting of sensible heat storage materials and latent heat storage materials. As the phase change heat storage materials offer many advantages over the sensible heat storage materials, the researchers are more interested in this system. The charging and discharging characteristics of thermal storage materials with various operational parameters have been reported. All the possible solar air heater applications with storage units have also been discussed.     

Parametric study of satratification in packed bed sensible heat,solar energy storage system

In this work the effect of system parameter namely equivalent diameter of local element, on the thermal stratification has been studied. This parameter has been varied over a range, and the effect on bed temperature, air temperature and stratification coefficient, etc. has been investigated. Accordingly, parameter that is to yield the best stratification is proposed.     

Comparative study of different numerical models of packed bed thermal energy storage systems

This paper presents, compares and validates two different mathematical models of packed bed storage with PCM, more specifically the heat transfer during charge of the PCM. The first numerical model is a continuous model based on the Brinkman equation and the second numerical model treats the PCM capsules as individual particles (energy equation model). Using the Brinkman model the flow field inside the porous media and the heat transfer mechanisms present in the packed bed systems can be described. On the other hand, using the energy equation model the temperature gradient inside the PCM capsules can be analysed. Both models are validated with experimental data generated by the authors. The experimental set up consists mainly of a cylindrical storage tank with a capacity of 3.73 L full of spherically encapsulated PCM. The PCM used has a storage capacity of 175 kJ/kg between ?2–13 °C. The results from the energy equation model show a basic understanding of cold charging. Moreover, three different Nu correlations found in the literature were analysed and compared. All of them showed the same temperature profile of the PCM capsules; hence any of them could be used in future models. The comparison between both mathematical models indicated that free convection is not as important as forced convection in the studied case.     

Optimization of bed parameters for packed bed solar energy collection system

Use of packed bed for the improvement of performance of solar air heater has been proposed by several investigators. However, this enhanced efficiency is accompanied by substantial increase in pressure loss, which results in higher running cost of the system. So, the solar energy collection system should be optimized in such a way that it will give energy with minimum cost. In this work two types of packed bed collectors, one with wire mesh screen matrix bed and other with pebble bed, were optimized on the basis of minimum cost per unit energy delivered. Tables for optimum values of bed parameters namely number of layers, porosity, pitch to wire diameter ratio and pebble diameter have been prepared on the basis of minimum cost per unit energy delivered. These tables can be used by a designer for selecting the optimum values of bed parameters.     

A review on long-term sorption solar energy storage

In the past decade, long-term sorption and thermochemical heat storage has generated lot of interest. This paper presents the state of the art in this field of research, materials used in these systems and technological difficulties that researchers are set against. An emphasis is put on recent demonstrative projects including absorption and adsorption for long-term solar energy storage. It emerges that considerable breakthrough have been made. Even though there is no mature long-term sorption or thermochemical energy storage yet, primarily due to the high cost of materials, the suitability of this technology to long-term storage remains its main power of attracting.     

柱状颗粒填充床的储能性能分析

填充床储能是一种很有发展前景的热能储存技术,它具有可降低存储成本和提高太阳能热系统开发效率等优点。研究人员多采用球形的储能单元,而圆柱体在储能填充床换热中有其独特的优势,因此基于圆柱形和拉西环形两种柱状颗粒,建立了一种潜热储能填充床的三维模型,采用数值模拟的方法分别研究两种柱状颗粒组成的填充床的储能性能,分析了储能填充床的直径比对其性能的影响。研究表明,填充床直径比越大,其储能性能越好。同时研究了圆柱形储能单元高度和拉西环形储能单元孔径对储能性能的影响。结果表明,在研究范围内,由高度为3 mm的圆柱形储能单元和孔半径1.50 mm的储能单元分别组成的填充床储能速率最高。     

Thermal modeling of a packed bed thermal energy storage system during charging

The process of charging of an encapsulated ice thermal energy storage device (ITES) is thermally modeled here through heat transfer and thermodynamic analyses. In heat transfer analysis, two different temperature profile cases, with negligible radial and/or stream-wise conduction are investigated for comparison, and the temperature profiles for each case are analyzed in an illustrative example. After obtaining temperature profiles through heat transfer analysis, a comprehensive thermodynamic study of the system is conducted. In this regard, energy, thermal exergy and flow exergy efficiencies, internal and external irreversibilities corresponding to flow exergy, as well as charging times are investigated. The energy efficiencies are found to be more than 99%, whereas the thermal exergy efficiencies are found to vary between 40% and 93% for viable charging times. The flow exergy efficiency varies between 48% and 88% for the flows and inlet temperatures selected. For a flow rate of 0.00164 m³/s, the maximum flow exergy efficiency occurs with an inlet temperature of 269.7 K, corresponding to an efficiency of 84.3%. For the case where the flow rate is 0.0033 m³/s, the maximum flow exergy efficiency becomes 87.9% at an inlet temperature of 270.7 K. The results confirm the fact that energy analyses, and even thermal exergy analyses, may lead to some unrealistic efficiency values. This could prove troublesome for designers wishing to optimize performance. For this reason, the flow exergy model provides the most useful information for those wishing to improve performance and reduce losses in such ITES systems.     

Nusselt number and friction factor correlations for packed bed solar energy storage system having large sized elements of different shapes

In order to investigate the effect of system and operating parameters on heat transfer and pressure drop characteristics of packed bed solar energy storage system with large sized elements of storage material, an extensive experimental study has been conducted and reported in the present paper. Five different shapes of elements of storage material have been investigated. Correlations have been developed for Nusselt number and friction factor as function of Reynolds number, sphericity and void fraction. The present correlations can be used to predict the performance of the actual packed bed solar energy storage system having packing material elements of different shapes and bed porosities within the range of parameters investigated.     

A review on energy and exergy analysis of solar dying systems

Solar energy is a clean, abundant and freely available renewable energy sources. Energy and exergy analysis of solar thermal devices has drawn considerable interest among the researchers across the world. Solar drying is the promising option to utilize low grade energy to dry agricultural produces. Exergy analysis is a tool to access the efficient usage of solar energy. It is the property of the system, which gives the maximum power that can be distracted from the system when it is brought to a thermodynamic equilibrium state from a reference state. Using exergy analysis, based on the first and second laws of thermodynamics, it is possible to infer the true potential of different kinds of energies. In this paper, a holistic approach on energy and exergy analysis of solar dryer with case studies has been made.     

Thermal characteristics of packed bed storage system

The thermal behaviour of a packed bed storage system charged with hot air is modelled using two partial differential equations representing the energy conservation in the air and solid phases constituting the bed. These two equations are coupled through the heat exchange process between the two phases. A fully implicit numerical scheme based on forward, upwind and central differencing for the time, first and second space derivatives, respectively, is used to solve the modelling equations. Marching technique is used for the air equation and a tri-diagonal matrix solver is employed to solve the solid equation. The solution yields the thermal structure of the bed, namely the air and solid temperature distribution inside the bed at any particular time, and the variation of total energy stored in the bed with time. The effect of bed length, solid diameter and void fraction on the thermal characteristics of the packed bed is studied. Further, the performance of the bed under variable inlet air temperature and mass flow rate is investigated.     

Thermal energy storage in a packed bed of iron spheres with liquid sodium coolant

In sodium/iron storage three principal factors cause thermocline broadening, these are: conduction resistance in the iron, convective resistance between the sodium and the iron and axial conduction in the sodium and iron. This note identifies the major design parameters which contribute to thermocline broadening, and a procedure is described for designing the storage bed to minimize thermocline losses.     

Review of latent thermal energy storage systems for solar air-conditioning systems

Solar air conditioning is an important approach to satisfy the high demand for cooling given the global energy situation. The application of phase-change materials (PCMs) in a thermal storage system is a way to address temporary power problems of solar air-conditioning systems. This paper reviews the selection, strengthening, and application of PCMs and containers in latent thermal storage system for solar air-conditioning systems. The optimization of PCM container geometry is summarized and analyzed. The hybrid enhancement methods for PCMs and containers and the cost assessment of latent thermal storage system are discussed. The more effective heat transfer enhancement using PCMs was found to mainly involve micro-nano additives. Combinations of fins and nanoadditives, nanoparticles, and metal foam are the main hybrid strengthening method. However, the thermal storage effect of hybrid strengthening is not necessarily better than single strengthening. At the same time, the latent thermal storage unit has less application in the field of solar air-conditioning systems, especially regarding heat recovery, because of its cost and thermal storage time. The integration of latent thermal storage units and solar air-conditioning components, economic analysis of improvement technology, and quantitative studies on hybrid improvement are potential research directions in the future.     

Exergetic and performance analyses of two-layered packed bed latent heat thermal energy storage system

In concentrating solar power (CSP) plant, a novel method involving the use of thermocline can be employed to augment the capability of the thermal energy storage system (TES). The rate of thermocline degradation can be reduced by packing encapsulated phase change material (PCM) in the TES. The thermal performance of the packed bed latent heat thermal energy storage system (PBTES) can be further enhanced by employing different diameters of PCM capsules arranged in multiple layers. In this paper, the thermal and exergetic performance of single-layered and two-layered PBTES is evaluated for varying mass flow rate, PCM capsule diameter and bed height of larger PCM capsules using a dynamic model based on simplified energy balance equations for PCM and heat transfer fluid (HTF). The single-layered PBTES has a lower TES latent charging rate than the two-layered PBTES. The charging efficiency and charging time of two-layered PBTES are increased by 15.85% and 16.85%, respectively for reducing the HTF mass flow rate by 14.29%. A higher stratification number can be achieved by using a two-layered PBTES instead of a single-layered PBTES filled with the corresponding larger diameter PCM capsules. The second law efficiency of the two-layered PBTES is found to be less than that of the single-layered PBTES. A decrease in the bed height of larger PCM capsules decreases the exergetic efficiency of the two-layered PBTES by 3.27%. The findings from this study can be used in further designing and optimising the multi-layered PBTES.     

Breakeven costs of storage in optimized solar energy systems

This paper describes the results of an analysis of the breakeven cost, or value, of energy storage to solar energy systems. The value of storage depends strongly both on the solar fraction of the solar energy system in which the storage is employed and on the cost of the collectors used in the system. Various strategies for dealing with this ambiguity are presented. For a broad class of technically and economically practical solar energy systems, storage costs need only be low enough to make a system employing very small amounts of storage practical. Reductions in the cost of collectors will thereafter produce greater reductions in the total system costs or provide greater fuel displacement at constant total system cost than will reductions in the cost of storage, within the limits discussed in the body of the paper. The analysis makes use of a simple, accurate representation of solar energy system performance which may prove useful in other contexts.     

Distributed photovoltaic generation and energy storage systems: A review

Currently, in the field of operation and planning of electrical power systems, a new challenge is growing which includes with the increase in the level of distributed generation from new energy sources, especially renewable sources. The question of load redistribution for better energetic usage is of vital importance since these new renewable energy sources are often intermittent. Therefore, new systems must be proposed which ally energy storage with renewable energy generators for reestablishment of grid reliability. This work presents a review of energy storage and redistribution associated with photovoltaic energy, proposing a distributed micro-generation complex connected to the electrical power grid using energy storage systems, with an emphasis placed on the use of NaS batteries. These systems aim to improve the load factor, considering supply side management, and the offer of backup energy, in the case of demand side management.     

On the calculation of the temperature distribution in a packed bed for solar energy applications

Calculations utilizing the exact solutions for the temperature distributions of the solid in and the fluid flowing through a packed bed with arbitrary initial bed temperature and arbitrary inlet fluid temperature have been carried out. The computational method allows a reversal of the direction of the flow at arbitrary times. The influence of the nondimensional frequency of a periodic flow reversal on the bed and fluid temperatures at the steady periodic state are presented.     

一种可蓄热太阳能睡床结构及性能分析

介绍了一种兼具蓄热与散热两种状态的太阳能供暖用睡床。该睡床的下部为蓄热水箱,可从太阳能集热板获取热量供给睡床。研究了基于该睡床的供暖系统在北京地区的应用情况,并分析了不同状态下床板上表面的散热量与被褥内的温度。结果表明：在全天散热状态下,典型年供暖季集热器效率为37.7 %,复合型睡床的有效供热量为4 390.2 MJ,太阳能保证率为80.7 %;在白天保温−夜间散热下,集热器效率为33.1 %,复合型睡床的有效供热量为4 441.1 MJ,太阳能保证率为81.8 %。     

岩石填充床蓄热性能试验研究

储能系统可以有效地提高能源利用率,是解决能量供需不平衡以及可再生能源不稳定问题的重要方式,近些年来已经成为国内外的研究热点。填充床是热能存储的主要形式之一,它是一个充满填充材料的热量存储装置,岩石和鹅卵石是最常用、最可靠的填充材料。文章分析了以高压空气作为传热流体的岩石填充床的蓄热特性,讨论和研究了不同试验参数对蓄热效率的影响。结果表明,岩石填充床的蓄热效率随空气压力的升高而降低,随空气质量流量的增大而增大,因而在较大的空气质量流量和较低的空气压力条件下可以得到较高的蓄热效率。