A versatile approach to develop porous hydrogels with a regular pore distribution and investigation of their physicomechanical properties

Porous polyacrylamide (PAAm) hydrogels with enhanced mechanical properties and regular pore distribution have been synthesized by a unique and facile methodology, which involves formation of the hydrogel pores by leaching out chemically modified silica particles. To improve the pore distribution and mechanical properties of the hydrogel network, porogen particles have been modified with PAAm chains chemically attached to the silica surface. Grafting polymerization initiated by peroxide groups immobilized on the particle surface has been used for this modification. The grafted PAAm layer on the silica surface improves the dispersibility of the porogen material in the hydrogel composition, and simultaneously forms pore “walls” reinforcing the hydrogel network, after leaching out the silica particles. The proposed synthetic way for the development of porous hydrogels includes three steps: (i) tethering of PAAm chains to silica particles due to the grafting polymerization initiated by an adsorbed polyperoxide macroinitiator (PPM), (ii) simultaneous crosslinking of grafted PAAm chains and PAAm forming hydrogel network, and (iii) pore formation by leaching out silica particles in the presence of hydrofluoric acid. The PPM has been synthesized by a free radical copolymerization of the peroxide monomer (PM) N‐(tert‐butylperoxymethyl)acrylamide with acrylamide. Both PM and PPM have been developed in our lab, and applied for the synthesis of porous polymeric hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of comb‐type grafted hydrogels composed of polyacrylamide and chitosan and their use for DNA adsorption

Comb‐type grafted hydrogels composed of polyacrylamide (PAAm) and chitosan (CT) were prepared and used for DNA adsorption. Instead of direct grafting of the acrylamide monomer onto the CT chain, semitelechelic PAAm with carboxylic acid end groups (PAAm–COOH) was synthesized by free‐radical polymerization with mercaptoacetic acid as the chain‐transfer agent, and it was grafted onto CT with amino groups. The synthesis of telechelic PAAm–COOH and the formation of comb‐type grafted hydrogels were confirmed by attenuated total reflectance/Fourier transform infrared spectroscopy and scanning electron microscopy measurements. The prepared comb‐type grafted hydrogels were used as sorbents in DNA adsorption experiments conducted at +4°C in a tris(hydroxymethyl)aminomethane/ethylenediaminetetraacetic acid solution of pH 7.4. DNA adsorption capacities as high as 2.0 × 10³ μg of DNA/g of dry gel could be achieved by the comb‐type hydrogels with higher PAAm contents. This value was approximately 6 times higher than that of CT alone. In addition, the comb‐type hydrogels showed a high adsorption/desorption rate depending on the PAAm content in the hydrogel. As a result, these comb‐type hydrogels carrying higher amounts of DNA may be considered good candidates for achieving higher removal rates for anti‐DNA antibodies and for effective gene therapy systems. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Sorption of Methylene Blue onto Ionic Composite Hydrogels Based on Polyacrylamide and Dextran Sulfate: Kinetics,Isotherms, and Thermodynamics

Ionic composite hydrogels based on polyacrylamide (PAAm) and dextran sulfate (DxS) have been prepared by radical polymerization at two temperatures: +20°C and ?18°C, using DxS as physical entrapped polymer, acrylamide (AAm) monomer, N,N^’-methylenebis(acrylamide) (BAAm) as cross-linking agent, ammonium persulfate as radical initiator, and N,N,N’,N’-tetramethylethylenediamine as accelerator of free-radical polymerization. The PAAm/DxS composite hydrogels were tested as sorbents for Methylene Blue (MB) from aqueous solution by the batch procedure. The effect of contact time, initial dye concentration, and temperature on the dye sorption onto composite hydrogels has been investigated. The modeling of the experimental data by applying different kinetic and isotherm models was also performed.     

Physicochemical and morphological properties of poly(acrylamide) and methylcellulose hydrogels: Effects of monomer,crosslinker and polysaccharide compositions

This article describes the physicochemical (mechanical and swelling) and morphological characterization of poly(acrylamide) and methylcellulose (PAAm‐MC) hydrogels synthesized with different formulations by the free radical polymerization method. The structure‐property relationship of the PAAm‐MC hydrogels is very important for application of these materials in different fields. Results showed that the properties of the PAAm‐MC hydrogels can be controlled by varying the acrylamide (AAm) and N′,N‐methylene‐bis‐acrylamide (MBAAm) concentrations and methylcellulose (MC) content. Increase of AAm and MBAAm concentrations causes a pronounced decrease in swelling degree (SD) values and porosity, and an increase in mechanical properties. Increasing the MC concentration caused an increase in SD values and porosity, but decrease in maximum load and modulus of elasticity because of the increase in the hydrogel hydrophilicity due to incorporation of hydroxyl groups from MC chains. PAAm‐MC hydrogels are excellent candidates for several applications, such as matrices for cell transplantation, controlled release (agrochemicals and drugs), tissue repair and regeneration. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

A novel fabrication method of temperature-responsive poly(acrylamide) composite hydrogel with high mechanical strength

High strength, stimuli-responsive poly(acrylamide) composite hydrogels (PAAm CH gels) were prepared by grafting polymerization of acrylamide (AAm) onto temperature-sensitive core–shell microgels. These microgels, composing of poly(N-isopropylacrylamide) as core and polyvinylamine (PVAm) as shell, were used as both initiator and crosslinker to form a robust three-dimensional network via bonding the poly(acrylamide) (PAAm) backbone. The CH gels exhibited a remarkably rapid shrinking rate and transmittance switch in response to the environmental temperature change, which the conventional chemically cross-linking PAAm hydrogels (PAAm OR) were short of. Even compared to the bulk PNIPAAm hydrogels (PNIPAAm OR) crosslinked with N,N′-methylenebisacrylamide (MBA), the CH gels were featured with faster responsive rate, which could be attributed to the formation of interconnected water transportation channels between the microspheres and PAAm gel matrix due to the fast shrinking of microgels. Moreover, the effects of microgel species and content on swelling and mechanical properties of CH gels were also systematically investigated. The results elaborated that the CH gels could be compressed almost 99% without breaking and completely recovered their original shape when the stress was removed. And the optimized compressive strength of CH gels could be up to 21.94 MPa. Based on the analysis of CH gel mechanical properties, the influence of microsphere content on effective network chains density of CH gels was discussed through rheology measurements. Finally, the essential reinforcement on mechanical properties was mainly contributed to the homogeneous microstructure of hydrogel network and the energy dissipation mechanism of microgels in gel matrix.     

Development of a robust hydrogel system based on agar and sodium alginate blend

BACKGROUND: As part of an ongoing research and development programme of our laboratory on functional modification of seaweed polysaccharides for preparing hydrogels with improved properties, we report herein the preparation of a robust hydrogel system based on grafting of agar and sodium alginate blend (Agar/Na‐Alg) with acrylamide (AAm) to obtain the copolymer Agar/Na‐Alg‐graft‐PAAm. RESULTS: A robust hydrogel system with superior absorbency and pH resistance has been developed based on a PAAm‐grafted seaweed polysaccharide blend of Agar/Na‐Alg. The blend (Agar/Na‐Alg) and grafted product (Agar/Na‐Alg‐graft‐PAAm) were evaluated using Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, swelling capacity, rheology and scanning electron microscopy. The swelling capacity of the grafted copolymer exhibited an enhancement over that of the blend from 14 to 24 g g^?1 in acidic medium. The blend and grafted copolymer produced hydrogels with lower gelling points of 31 and 29 °C and gel strengths were 170 and 120 g cm^?2, respectively. CONCLUSION: This study constitutes an example of value addition of seaweed polysaccharides targeting new applications. The copolymer hydrogel may be useful in health, personal care and agricultural applications. Copyright © 2007 Society of Chemical Industry     

Suppression of inhomogeneities in hydrogels formed by free-radical crosslinking copolymerization

Network microstructures of poly(acrylamide) (PAAm) and poly(N,N-dimethylacrylamide) (PDMA) hydrogels were compared by static light scattering and elasticity measurements. The hydrogels were prepared by free-radical crosslinking copolymerization of the monomers acrylamide (AAm) or N,N-dimethylacrylamide (DMA) with N,N′-methylenebis(acrylamide) as a crosslinker. During the formation of PAAm gels, the reaction time dependence of the scattered light intensity exhibits a maximum at a critical reaction time, while in case of PDMA gels, both a maximum and a minimum were observed, corresponding to the chain overlap threshold and the gel point, respectively. This difference in the time-course between the two gelling systems is due to the late onset of gelation in the DMA system with respect to the critical overlap concentration. Compared to the AAm system, no significant scattered light intensity rise was observed during the crosslinking polymerization of DMA. It was shown that, regardless of the crosslinker ratio and of the initial monomer concentration, PDMA gel is much more homogeneous than the corresponding PAAm gel due to the shift of the gelation threshold to the semidilute regime of the reaction system. The results suggest that the spatial gel inhomogeneity can be controlled by varying the gel point with respect to the critical overlap concentration during the preparation of gels by free-radical mechanism.     

Development of a thermosensitive grafted drug delivery system—synthesis and characterization of NIPAAm‐based grafts and hydrogel structure

A thermosensitive grafted hydrogel was investigated for heating‐activated drug release. The hydrogel was created by grafting oligomers of N‐isopropylacrylamide‐co‐acrylamide (AAm) to a poly(2‐hydroxyethyl methacrylate), or PHEMA, hydrogel. N‐Isopropylacrylamide‐co‐AAm oligomers were synthesized with a range of compositions to raise the lower critical solution temperature (LCST) above physiological temperature. PHEMA hydrogels with these thermosensitive grafts were synthesized by free‐radical solution polymerization, using an acrylated version of the oligomers. The oligomers were characterized for their molecular weight, LCSTs, and rate of response to a change in temperature. With the flexibility in tuning their properties by varying reaction parameters, these oligomers present possibilities in several fields, including drug delivery. The impact of cross‐linking agent type and the amount and presence of grafts on the polymer network structure was found by determining the hydrogel mesh sizes. PHEMA gels cross‐linked with methylenebisacrylamide had larger mesh sizes than those cross‐linked with ethylene glycol dimethacrylate. Increasing amounts of cross‐linking agent decreased mesh sizes. LCSTs exhibited by oligomers were slightly lower than those exhibited by polymer gels of the same composition. The grafting reaction was found to have only a slight impact on the hydrogel mesh size. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Swelling–deswelling kinetics of ionic poly(acrylamide) hydrogels and cryogels

A series of ionic poly(acrylamide) (PAAm) gels was prepared by free‐radical crosslinking copolymerization of acrylamide and N,N′‐methylenebisacrylamide in aqueous solutions. The gels were prepared both below and above the bulk freezing temperature of the polymerization solvent water, which are called as the cryogels and the hydrogels, respectively. The deswelling behavior of swollen gels in acetone as well as the reswelling behavior of the collapsed gels in water were investigated. It was shown that the cryogels respond against the external stimuli much faster than the hydrogels. The interior morphology of the cryogel networks exhibits a discontinuity and a two‐phase structure, compared to the continuous morphology of the hydrogel networks. Introduction of the ionic units in the network chains further increased the response rate of the cryogels. In contrast to these advantages of cryogels, they exhibit lower swelling capacities than the conventional hydrogels. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 319–325, 2006     

Chitosan–Quercetin Bioconjugate as Multi‐Functional Component of Antioxidants and Dual‐Responsive Hydrogel Networks

Multifunctional hydrogels based on chitosan–quercetin (CHITQ) conjugate are prepared by a thermo‐induced radical procedure in the presence of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and N,N′‐methylenebis(acrylamide) (MEBA). At first, quercetin (Q) is grafted onto chitosan backbone with a functionalization degree of 275 mg of Q per gram of conjugate, as calculated by ¹H‐NMR analyses to impart antioxidant properties to the polysaccharide. Then, a pH and temperature sensitive hydrogel was obtained by involving CHITQ and NIPAAm in the polymerization reaction. The accessibility of phenolic moieties is modified in response to the hydrogel swelling/deswelling, as confirmed by antioxidant tests performed at different temperatures. Dual stimuli‐responsive hydrogels are proposed for the delivery of caffeine as model drug. The release profiles of caffeine depict a system particularly performing as on/off device at acidic pH with excellent applicability prospects.     

Antifouling enhancement of PVDF membrane tethered with polyampholyte hydrogel layers

The preparation and property of antifouling poly(vinylidene fluoride) (PVDF) membrane tethered with polyampholyte hydrogel layers were described in this work. In fabricating these membranes, the [2‐(methacryloyloxy)ethyl] trimethylammonium chloride and 2‐acrylamide‐2‐methyl propane sulfonic acid monomers were grafted onto the alkali‐treated PVDF membrane to yield polyampholyte hydrogel layers via radical copolymerization with N,N′‐methylenebisacrylamide as crosslinking agent. The analyses of fourier transform infrared attenuated total reflection spectroscopy and X‐ray photoelectron spectroscopy confirm the covalent immobilization of polyampholyte hydrogel layer on PVDF membrane surface. The grafting density of polyampholyte hydrogel layer increases with the crosslinking agent growing. Especially for the membrane with a high grafting density, a hydrogel layer can be observed obviously, which results in the complete coverage of membrane pores. Because of the hydrophilic characteristic of grafted layer, the modified membranes show much lower protein adsorption than pristine PVDF membrane. Cycle filtration tests indicate that both the reversible and irreversible membrane fouling is alleviated after the incorporation of polyampholyte hydrogel layer into the PVDF membrane. This work provides an effective pathway of covalently tethering hydrogel onto the hydrophobic membrane surface to achieve fouling resistance. POLYM. ENG. SCI., 55:1367–1373, 2015. © 2015 Society of Plastics Engineers     

Application of polysaccharide hydrogels in adsorption and controlled‐extended release of fertilizers processes

This article studied the applicability of poly(acrylamide) and methylcellulose (PAAm‐MC) hydrogels as potential delivery vehicle for the controlled‐extended release of ammonium sulfate (NH₄)₂SO₄ and potassium phosphate (KH₂PO₄) fertilizers. PAAm‐MC hydrogels with different acrylamide (AAm) and MC concentrations were prepared by a free radical polymerization method. The adsorption and desorption kinetics of fertilizers were determined using conductivity measurements based on previously built analytical curve. The addition of MC in the PAAm chains increased the quantities of (NH₄)₂SO₄ and KH₂PO₄ loaded and extended the time and quantities of fertilizers released. Coherently, both loading and releasing processes were strongly influenced by hydrophilic properties of hydrogels (AAm/MC mass proportion). The best sorption (124.0 mg KH₂PO₄/g hydrogel and 58.0 mg (NH₄)₂SO₄/g hydrogel) and desorption (54.9 mg KH₂PO₄/g hydrogel and 49.5 mg (NH₄)₂SO₄/g hydrogel) properties were observed for 6.0% AAm–1.0% MC hydrogels (AAm/MC mass proportion equal 6), indicating that these hydrogels are potentially viable to be used in controlled‐extended release of fertilizers systems. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of hydrolysis on spatial inhomogeneity in poly(acrylamide) gels of various crosslink densities

The spatial inhomogeneity in poly(acrylamide) (PAAm) gels of various crosslink densities has been investigated with the static light scattering measurements. The gels were prepared using N,N′-methylenebis(acrylamide) (BAAm) as a crosslinker at a fixed initial monomer concentration but at various crosslink densities. Ammonium persulfate-N,N,N′,N′-tetramethylethylenediamine (TEMED) redox initiator system was used to initiate the polymerization reactions as well as to create charged groups in the aged gels. The gels were characterized by elasticity tests and by light scattering measurements at a gel state just after their preparation. Elasticity measurements show that 91-94% of the crosslinker molecules used in the hydrogel preparation were wasted in ineffective crosslinks. Debye-Bueche analysis of the light scattering data indicates frozen concentration fluctuations within the gel samples, which increase continuously with increasing crosslink density of the hydrogels. This phenomenon was explained with the multiple crosslinking reactions leading to the formation of highly crosslinked regions in the final hydrogel. The extent of concentration fluctuations was found to decrease drastically with increasing time of aging of gels in the synthesis reactor, indicating that the hydrolysis of amide groups into carboxylate anions facilitates the homogenization of the gel samples. A thermodynamic model was developed to explain the experimental observations in terms of the osmotic pressure of counterions in the aged gels.     

Radical/Addition polymerization silicone hydrogels with simultaneous interpenetrating hydrophilic/hydrophobic networks

Transparent silicone hydrogels with interpenetrating hydrophilic/hydrophobic networks were simultaneously synthesized on the basis of the radical polymerization of the methacrylic monomer of 3‐methacryloxypropyl tris(trimethylsiloxy) silane (TRIS)/N,N‐dimethylacrylamide (DMA) and the addition polymerization of hydroxyl‐grafted polysiloxane (HPSO)/isophorone diisocyanate. The curing temperature was set at 80°C by a differential scanning calorimetry study. The polymerization process was studied by in situ Fourier transform infrared spectroscopy. The results indicate that the curing time was about 4.5 min, and the addition polymerization had a faster rate than radical polymerization. Then, the radical polymerization rate increased rapidly, and this led to instant curing. The interpenetrating polymer network (IPN) silicone hydrogels were characterized by swelling kinetics and dynamic mechanical thermal analysis. The results show that all of the hydrogels reached swelling equilibrium at about 4 h in water, and the IPN silicone hydrogels with a hydrophobic network of HPSO indicated a slower water transport than that of the copolymerization hydrogel of DMA and TRIS. The hydrophobic network was finely dispersed in the hydrophilic network, and the increasing hydrophobic network of HPSO decreased the glass‐transition temperature of the IPN silicone hydrogels. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41399.     

Degradation on polyacrylamides. Part II. Polyacrylamide gels

The stability of polyacrylamide (PAAm) gels, synthesized by free radical polymerization of acrylamide (AAm) and N,N′-methylenebisacrylamide (BIS), was investigated when subjected to thermal and irradiation conditions. The PAAm gels were stable and did not release AAm under fluorescent light. In aqueous solution at 95 °C, a small amount of AAm was observed and it is shown that this is found from the pendant unsaturation of BIS in the gel network. Under UV irradiation, approximately one molecule of AAm is released for every 20,000 repeat monomer units in the gel. Gels were also synthesized from methacrylamide with BIS, AAm with N,N′-methylenebismethacrylamide and AAm with bisacryloyl-piperazine. Their stability is compared to the AAm/BIS gels.     

Rapid pH/temperature-responsive cationic hydrogels with dual stimuli-sensitive grafted side chains

Dual temperature- and pH-sensitive comb-type grafted cationic hydrogels are successfully synthesized by grafting polymeric chains with freely mobile ends, which are composed of both N-isopropylacrylamide (NIPAM) segments and N,N-dimethylamino ethyl methacrylate (DMAEMA) segments, onto the backbone of crosslinked poly(NIPAM-co-DMAEMA) networks. Equilibrium and dynamic swelling/deswelling properties of the prepared hydrogels responding to pH and/or temperature are investigated. The prepared hydrogels demonstrate a lower critical solution temperature (LCST) at about 34 °C and a pK_a value at about pH 7.3. At lower pH and lower temperature, both the swelling degree and the swelling rate of the comb-type grafted hydrogel are larger than those of the normal-type crosslinked hydrogel. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogel exhibits a more rapid deswelling rate than that of the normal-type hydrogel in response to a pH jump from 2.0 to 11.0 at a fixed temperature. The volume changes of the poly(NIPAM-co-DMAEMA) hydrogels are acute in a series of fixed buffer solutions with an abrupt increase of environmental temperature from 18 °C to a temperature higher than the LCST. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogels show quite fast shrinking behaviors in response to simultaneous dual temperature and pH stimuli. Drug-release in vitro from the prepared poly(NIPAM-co-DMAEMA) hydrogels is carried out when the environmental temperature and pH are changed synchronously. The results show that the model drug Vitamin B₁₂ is released much more rapidly from the comb-type grafted hydrogel than that from the normal-type hydrogel. The proposed dual temperature/pH-sensitive comb-type grafted cationic poly(NIPAM-co-DMAEMA) hydrogel in this study may find various potential applications, e.g., for fabricating rapid-response smart sensors, actuators, and chemical/drug carriers and so on.     

Preparation of chitosan‐g‐poly(acrylamide)/montmorillonite superabsorbent polymer composites: Studies on swelling,thermal, and antibacterial properties

Superabsorbent composites based on chitosan‐g‐poly(acrylamide) and montorillonite (CTS‐g‐PAAm/MMT) were synthesized through in situ radical polymerization by grafting of crosslinked acrylamide onto chitosan backbone in presence of MMT at different contents. The formation of the grafted network was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The obtained porous structure was observed by scanning electron microscope (SEM). The presence of clay and its interaction with chitosan‐g‐poly(acrylamide) (CTS‐g‐PAAm) matrix was evidenced by ATR‐FTIR analysis. The morphology was investigated by both X‐ray diffraction (XRD) and SEM analyses. It was suggested the formation of mostly exfoliated structures with more porous structures. Besides, the thermal stability of these composites, observed by TGA analysis, was slightly affected by the clay loading as compared to the matrix. These hydrogel composites were also hydrolyzed to achieve anionic hydrogels with ampholytic properties. Swelling behaviors were examined in doubly distilled water, 0.9 wt % NaCl solution and buffer solutions. The water absorbency of all superabsorbent composites was enhanced by adding clay, where the maximum was reached at 5 wt % of MMT. Their hydrolysis has not only greatly optimized their absorption capacity but also improved their swelling rate and salt‐resistant ability. The hydrolyzed superabsorbent showed better pH‐sensitivity than the unhydrolyzed counterparts. The results of the antibacterial activity of these superabsorbents composites against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), assayed by the inhibitory zone tests, have showed moderate inhibition of the bacteria growth. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39747.     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Design of high-toughness polyacrylamide hydrogels by hydrophobic modification

Polyacrylamide (PAAm) hydrogels possessing a very large extensibility at break have been prepared via micellar crosslinking copolymerization of acrylamide monomer and N,N′-methylenebis(acrylamide) crosslinker in the presence of hydrophobic comonomers. N-butyl-, N-hexyl-, N-octyl-, and N,N-dihexylacrylamides were used as the hydrophobes in the hydrogel preparation. Incorporation of hydrophobes with an alkyl chain length x > 4 results in an increase in the loss factor tan δ of hydrogels due to the formation of temporary junction zones inside the gel network. The number N_H of the hydrophobes per hydrophobic block together with the alkyl chain length x of the pendant hydrophobic group were used to tune the loss factor of the hydrogels over two orders of magnitude. Tensile mechanical measurements show that increasing N_H or x also increases the degree of toughness of PAAm hydrogels. Keeping constant the hydrophobe level (20 mol%) at an alkyl chain length x = 6, increasing N_H from 9 to 30 increased the elongation ratio at break from 125 to 250%. Hydrogels exhibiting a high toughness, i.e., about 300% elongation ratio at break were obtained by modification of PAAm network chains with 10 mol% N-octylacrylamide.     

Removal of paraquat pesticide from aqueous solutions using a novel adsorbent material based on polyacrylamide and methylcellulose hydrogels

This research studied the characteristics of poly(acrylamide) and methylcellulose (PAAm‐MC) hydrogels as a novel adsorbent material for removal of pesticide paraquat, from aqueous solution, with potential applications in curbing environmental risk from such herbicides. PAAm‐MC hydrogels with different acrylamide (AAm) and MC concentrations were prepared by a free‐radical polymerization method. The capability of the hydrogels in removing paraquat dichloride from aqueous solution was determined using UV–Vis analysis. The scanning electron microscopy method was used to study the morphological properties of the hydrogels, and swelling degree (Q) of the hydrogels was also measured. The entrapped MC in PAAm chains provoked significant changes in morphological, hydrophilic, and adsorption properties of the PAAm‐MC hydrogels. The adsorption capacity of hydrogels was strongly influenced by AAm, MC, and paraquat concentrations with the highest adsorption capacity (q_eq = 14.3 mg g^?1) was observed for hydrogels synthesized with 6.0% AAm with 0.75% MC swollen in 45.7 mg L^?1 of paraquat solution. Freundlich model performed better than Langmuir model in describing the adsorption isotherm of PAAm‐MC/paraquat system, implying a heterogeneous surface. These results suggest that PAAm‐MC hydrogels are potentially viable absorbents for removal of paraquat pesticide from aqueous solution and cleaning water contaminated with dyes, heavy metals, and others pesticides. © 2009 Wiley Periodicals, Inc. Journal of Appl Polym Sci, 2009