Hydrogen addition to tea seed oil biodiesel: Performance and emission characteristics

Compression ignition engines are the dominant tools of the modern human life especially in the field of transportation. But, the increasing problematic issues such as decreasing reserves and environmental effects of diesel fuels which is the energy source of compression ignition engines forcing researchers to investigate alternative fuels for substitution or decreasing the dependency on fossil fuels. The mostly known alternative fuel is biodiesel fuel and many researchers are investigating the possible raw materials for biodiesel production. Also, hydrogen fuel is an alternative fuel which can be used in compression ignition engines for decreasing fuel consumption and hazardous exhaust emissions by enriching the fuel. In this study, influences of hydrogen enrichment to diesel and diesel tea seed oil biodiesel blends (B10 and B20) were investigated on an unmodified compression ignition engine experimentally. In consequence of the experiments, lower torque and higher brake specific fuel consumption data were measured when the engine was fuelled diesel biodiesel blends (B10 and B20) instead of diesel fuel. Also, diesel biodiesel blends increased CO₂ and NO_x emissions while decreasing the CO emissions. Hydrogen enrichment (5 l/m and 10 l/m) was improved the both torque and brake specific fuel consumption for all test fuels. Furthermore, hydrogen enrichment reduced CO and CO₂ emissions due to absence of carbon atoms in the chemical structure for all test fuels. Increasing flow rate of hydrogen fuel from 5 l/m to 10 l/m further improved performance measures and emitted harmful gases except NO_x. The most significant drawback of the hydrogen enrichment was the increased NO_x emissions.     

Influence of fuel properties and composition on NOx emissions from biodiesel powered diesel engines: A review

Biodiesel has proved to be an environment friendly alternative fuel for diesel engine because it can alleviate regulated and unregulated exhaust emissions. However, most researchers have observed a significant increase in NO_x emissions with biodiesel when compared to petrodiesel. The exact cause of this increase is still unclear; however, researchers believe that the fuel properties have been shown to effect the emissions of NO_x. The present work reviews the effect of fuel properties and composition on NO_x emissions from biodiesel fuelled engines. The paper is organised in three sections. The first section deals with the NO_x formation mechanisms. In the following section, the reasons for increased NO_x emissions of biodiesel fuel are discussed. After this, the influence of composition and fuel properties on NO_x emissions from biodiesel fuelled engines has been reviewed. Finally, some general conclusions concerning this problem are summarised and further researches are pointed out.     

Study of antioxidant effect on oxidation stability and emissions in a methyl ester of neem oil fuelled DI diesel engine

Biodiesel as an alternative diesel fuel prepared from vegetable oils or animal fats has attracted more and more attention because of its renewable and environmental-friendly nature. But biodiesel undergoes oxidation and degenerate more quickly than mineral diesel. Further several studies report NO_x emissions increases for biodiesel fuel compared with conventional diesel fuel. In this paper, the experimental investigation of the effect of antioxidant additive (Butylated hydroxytoluene) on oxidation stability and NO_x emissions in a methyl ester of neem oil fuelled direct injection diesel engine has been reported. The antioxidant additive is mixed in various proportions (100–400 ppm) with methyl ester of neem oil. The oxidation stability was tested in Rancimat apparatus and emissions, performance in a computerized 4-stroke water-cooled single cylinder diesel engine of 3.5 kW rated power. Results show that the antioxidant additive is effective in increasing the oxidation stability and in controlling the NO_x emissions of methyl ester of neem oil fuelled diesel engines.     

Application of exhaust gas fuel reforming in diesel and homogeneous charge compression ignition (HCCI) engines fuelled with biofuels

This paper documents the application of exhaust gas fuel reforming of two alternative fuels, biodiesel and bioethanol, in internal combustion engines. The exhaust gas fuel reforming process is a method of on-board production of hydrogen-rich gas by catalytic reaction of fuel and engine exhaust gas. The benefits of exhaust gas fuel reforming have been demonstrated by adding simulated reformed gas to a diesel engine fuelled by a mixture of 50% ultra low sulphur diesel (ULSD) and 50% rapeseed methyl ester (RME) as well as to a homogeneous charge compression ignition (HCCI) engine fuelled by bioethanol. In the case of the biodiesel fuelled engine, a reduction of NO_x emissions was achieved without considerable smoke increase. In the case of the bioethanol fuelled HCCI engine, the engine tolerance to exhaust gas recirculation (EGR) was extended and hence the typically high pressure rise rates of HCCI engines, associated with intense combustion noise, were reduced.     

Combustion and emission characteristics of an off-road diesel engine fuelled with biodiesel–diesel blends

In this work, the combustion and emission characteristics were studied in a 186FA diesel engine fuelled with biodiesel–diesel to examine the effect of the percentage of biodiesel in the blends, and the experimental investigation was conducted with various blending ratios of biodiesel under different operating conditions. In addition, the combustion noise of the diesel engine fuelled with biodiesel–diesel was analysed, and then the emission characteristics of NO_x and soot were studied through simulation analysis where the formation rate and distribution of NO_x and soot for pure diesel and B20 fuel were described. Based on the simulation data of the original diesel engine fuelled with B20 fuel, the swirl ratio and fuel injection timing were optimised and the technical measures were suggested to reduce the two different emissions simultaneously. The simulation results showed the emission characteristics were optimal when the swirl ratio was 2.7 and fuel injection timing was 7.5° degree of crank angle before top dead centre respectively.     

Biodiesel production from inedible animal tallow and an experimental investigation of its use as alternative fuel in a direct injection diesel engine

In this study, a substitute fuel for diesel engines was produced from inedible animal tallow and its usability was investigated as pure biodiesel and its blends with petroleum diesel fuel in a diesel engine. Tallow methyl ester as biodiesel fuel was prepared by base-catalyzed transesterification of the fat with methanol in the presence of NaOH as catalyst. Fuel properties of methyl ester, diesel fuel and blends of them (5%, 20% and 50% by volume) were determined. Viscosity and density of fatty acid methyl ester have been found to meet ASTM D6751 and EN 14214 specifications. Viscosity and density of tallow methyl esters are found to be very close to that of diesel. The calorific value of biodiesel is found to be slightly lower than that of diesel. An experimental study was carried out in order to investigate of its usability as alternative fuel of tallow methyl ester in a direct injection diesel engine. It was observed that the addition of biodiesel to the diesel fuel decreases the effective efficiency of engine and increases the specific fuel consumption. This is due to the lower heating value of biodiesel compared to diesel fuel. However, the effective engine power was comparable by biodiesel compared with diesel fuel. Emissions of carbon monoxide (CO), oxides of nitrogen (NO_x), sulphur dioxide (SO₂) and smoke opacity were reduced around 15%, 38.5%, 72.7% and 56.8%, respectively, in case of tallow methyl esters (B100) compared to diesel fuel. Besides, the lowest CO, NO_x emissions and the highest exhaust temperature were obtained for B20 among all other fuels. The reductions in exhaust emissions made tallow methyl esters and its blends, especially B20 a suitable alternative fuel for diesel and thus could help in controlling air pollution. Based on this study, animal tallow methyl esters and its blends with petroleum diesel fuel can be used a substitute for diesel in direct injection diesel engines without any engine modification.     

Determination of ecological efficiency in internal combustion engines: The use of biodiesel

This paper evaluates and quantifies the environmental impact from the use of some renewable fuels and fossils fuels in internal combustion engines. The following fuels are evaluated: gasoline blended with anhydrous ethyl alcohol (anhydrous ethanol), conventional diesel fuel, biodiesel in pure form and blended with diesel fuel, and natural gas. For the case of biodiesel, its complete life cycle and the closed carbon cycle (photosynthesis) were considered. The ecological efficiency concept depends on the environmental impact caused by CO₂, SO₂, NO_x and particulate material (PM) emissions. The exhaust gases from internal combustion engines, in the case of the gasoline (blended with alcohol), biodiesel and biodiesel blended with conventional diesel, are the less polluting; on the other hand, the most polluting are those related to conventional diesel. They can cause serious problems to the environment because of their dangerous components for the human, animal and vegetable life. The resultant pollution of each one of the mentioned fuels are analyzed, considering separately CO₂, SO₂, NO_x and particulate material (PM) emissions. As conclusion, it is possible to calculate an environmental factor that represents, qualitatively and quantitative, the emissions in internal combustion engines that are mostly used in urban transport. Biodiesel in pure form (B100) and blended with conventional diesel as fuel for engines pollute less than conventional diesel fuel. The ecological efficiency for pure biodiesel (B100) is 86.75%; for biodiesel blended with conventional diesel fuel (B20, 20% biodiesel and 80% diesel), it is 78.79%. Finally, the ecological efficiency for conventional diesel, when used in engines, is 77.34%; for gasoline, it is 82.52%, and for natural gas, it is 91.95%. All these figures considered a thermal efficiency of 30% for the internal combustion engine.     

Biodiesel fuel in diesel micro-turbine engines: Modelling and experimental evaluation

Many performance and emission tests have been carried out in reciprocating diesel engines that use biodiesel fuel over the past years and very few in gas turbine engines. This work aims at assessing the thermal performance and emissions at full and partial loads of a 30 kW diesel micro-turbine engine fed with diesel, biodiesel and their blends as fuel. A cycle simulation was performed using the Gate Cycle GE Enter software to evaluate the thermal performance of the 30 kW micro-turbine engine. Performance and emission tests were carried out on a 30 kW diesel micro-turbine engine installed in the NEST laboratories of the Federal University of Itajubá, and the performance results were compared with those of the simulation. There was a good agreement between the simulations and the experimental results from the full load down to about 50% of the load for diesel, biodiesel and their blends. The biodiesel and its blends used as fuel in micro-turbines led to no significant changes in the engine performance and behaviour compared to diesel fuel. The exhaust emissions were evaluated for pure biodiesel and its blends and conventional diesel. The results revealed that the use of biodiesel resulted in a slightly higher CO, lower NO_x and no SO₂ emissions.     

A critical review: Application of methanol as a fuel for internal combustion engines and effects of blending methanol with diesel/biodiesel/ethanol on performance,emission, and combustion characteristics of engines

This article presents a comprehensive overview of methanol as a potential oxygenated fuel for internal combustion engines. Here two approaches have been examined to evaluate the utilization of methanol, namely blending with diesel/biodiesel/methanol and premixing with intake air or fumigation. In conventional compression ignition engines, up to 95% and 25% diesel can be replaced by methanol through fumigation and blending, respectively. Higher latent heat of vaporization of alcohol led to lower peak in-cylinder pressure and NO_x; however, it negatively affects thermal efficiency and hydrocarbon and carbon monoxide emissions. Fumigation of alcohol requires modifications in the existing engine, whereas blending needed surfactants or additives to produce stable alcohol–diesel blends. High injection pressure and late direct injection, methanol–diesel blends have shown lower emissions and proved their potential as a suitable replacement for ethanol–diesel blends from the components durability perspective.     

Combustion of fat and vegetable oil derived fuels in diesel engines

In this article, the status of fat and oil derived diesel fuels with respect to fuel properties, engine performance, and emissions is reviewed. The fuels considered are primarily the methyl esters of fatty acids derived from a variety of vegetable oils and animal fats, and referred to as biodiesel. The major obstacle to widespread use of biodiesel is the high cost relative to petroleum. Economics of biodiesel production are discussed, and it is concluded that the price of the feedstock fat or oil is the major factor determining biodiesel price.Biodiesel is completely miscible with petroleum diesel fuel, and is generally tested as a blend. The use of biodiesel in neat or blended form has no effect on the energy based engine fuel economy. The lubricity of these fuels is superior to conventional diesel, and this property is imparted to blends at levels above 20 vol%. Emissions of PM can be reduced dramatically through use of biodiesel in engines that are not high lube oil emitters. Emissions of NO_x increase significantly for both neat and blended fuels in both two- and four-stroke engines. The increase may be lower in newer, lower NO_x emitting four-strokes, but additional data are needed to confirm this conclusion. A discussion of available data on unregulated air toxins is presented, and it is concluded that definitive studies have yet to be performed in this area. A detailed discussion of important biodiesel properties and recommendations for future research is presented. Among the most important recommendations is the need for all future studies to employ biodiesel of well-known composition and purity, and to report detailed analyses. The purity levels necessary for achieving adequate engine endurance, compatibility with coatings and elastomers, cold flow properties, stability, and emissions performance must be better defined.     

The effect of clove oil and diesel fuel blends on the engine performance and exhaust emissions of a compression-ignition engine

Diesel engines provide the major power source for transportation in the world and contribute to the prosperity of the worldwide economy. However, recent concerns over the environment, increasing fuel prices and the scarcity of fuel supplies have promoted considerable interest in searching for alternatives to petroleum based fuels. Based on this background, the main purpose of this investigation is to evaluate clove stem oil (CSO) as an alternative fuel for diesel engines. To this end, an experimental investigation was performed on a four-stroke, four-cylinder water-cooled direct injection diesel engine to study the performance and emissions of an engine operated using the CSO–diesel blended fuels. The effects of the CSO–diesel blended fuels on the engine brake thermal efficiency, brake specific fuel consumption (BSFC), specific energy consumption (SEC), exhaust gas temperatures and exhaust emissions were investigated. The experimental results reveal that the engine brake thermal efficiency and BSFC of the CSO–diesel blended fuels were higher than the pure diesel fuel while at the same time they exhibited a lower SEC than the latter over the entire engine load range. The variations in exhaust gas temperatures between the tested fuels were significant only at medium speed operating conditions. Furthermore, the HC emissions were lower for the CSO–diesel blended fuels than the pure diesel fuel whereas the NO_x emissions were increased remarkably when the engine was fuelled with the 50% CSO–diesel blended fuel.     

Experimental investigation of control of NOx emissions in biodiesel-fueled compression ignition engine

Biodiesel is an alternative fuel consisting of the alkyl esters of fatty acids from vegetable oils or animal fats. Vegetable oils are produced from numerous oil seed crops (edible and non-edible), e.g., rapeseed oil, linseed oil, rice bran oil, soybean oil, etc. Research has shown that biodiesel-fueled engines produce less carbon monoxide (CO), unburned hydrocarbon (HC), and particulate emissions compared to mineral diesel fuel but higher NO_x emissions. Exhaust gas recirculation (EGR) is effective to reduce NO_x from diesel engines because it lowers the flame temperature and the oxygen concentration in the combustion chamber. However, EGR results in higher particulate matter (PM) emissions. Thus, the drawback of higher NO_x emissions while using biodiesel may be overcome by employing EGR. The objective of current research work is to investigate the usage of biodiesel and EGR simultaneously in order to reduce the emissions of all regulated pollutants from diesel engines. A two-cylinder, air-cooled, constant speed direct injection diesel engine was used for experiments. HCs, NO_x, CO, and opacity of the exhaust gas were measured to estimate the emissions. Various engine performance parameters such as thermal efficiency, brake specific fuel consumption (BSFC), and brake specific energy consumption (BSEC), etc. were calculated from the acquired data. Application of EGR with biodiesel blends resulted in reductions in NO_x emissions without any significant penalty in PM emissions or BSEC.     

NOX emissions of compression ignition engines fueled with various biodiesel blends: A review

There are some challenges about NO_X emissions exhausted from diesel engines fueled with biodiesel. Due to increasingly stringent emission regulations, the different methods such as varying the engine operating parameters, treatment with antioxidant additive and blending fuels have been adapted to reduce emissions of biodiesel combustion. One of the effective methods is the combustion of dual or blending fuels. Various fuels such as gasoline, hydrogen, natural gas, biogas, different types of alcohols and also fuel additives have been used to reduce biodiesel disadvantages. This study reviews the potential of the different fuels as an additive in biodiesel fuel in correspond to reduce NO_X emissions. The general reduction of NO_X has been observed with the presence of gasoline, biogas and alcohols in biodiesel blends. The reduction of NO_X in biodiesel-hydrogen, biodiesel-diesel or biodiesel–CNG combustion has not been observed through all engine conditions. Moreover the retarding injection timing, the lower injection pressure, EGR higher than 30% can result in the reduced NO_X emissions. However it seems the decrease in NO_X emissions can be achieved by the use of most fuels in blending with biodiesel under all engine operating conditions, if only the proper injection parameters and blending proportions of fuels are set.     

Experimental investigation on the performance and emissions of a diesel engine fuelled with ethanol–diesel blends

An experimental investigation on the application of the blends of ethanol with diesel to a diesel engine was carried out. First, the solubility of ethanol and diesel was conducted with and without the additive of normal butanol (n-butanol). Furthermore, experimental tests were carried out to study the performance and emissions of the engine fuelled with the blends compared with those fuelled by diesel. The test results show that it is feasible and applicable for the blends with n-butanol to replace pure diesel as the fuel for diesel engine; the thermal efficiencies of the engine fuelled by the blends were comparable with that fuelled by diesel, with some increase of fuel consumptions, which is due to the lower heating value of ethanol. The characteristics of the emissions were also studied. Fuelled by the blends, it is found that the smoke emissions from the engine fuelled by the blends were all lower than that fuelled by diesel; the carbon monoxide (CO) were reduced when the engine ran at and above its half loads, but were increased at low loads and low speed; the hydrocarbon (HC) emissions were all higher except for the top loads at high speed; the nitrogen oxides (NO_x) emissions were different for different speeds, loads and blends.     

Oxides of nitrogen emissions from biodiesel-fuelled diesel engines

Biodiesel has received, and continues to receive, considerable attention for its potential use as an augmenting fuel to petroleum diesel. Its advantages include decreased net carbon dioxide, hydrocarbon, carbon monoxide, and particulate matter emissions, and fuel properties similar to petroleum diesel for ease of use in diesel engines. Its disadvantages include poorer cold flow characteristics, lower heating values, and mostly reported higher emissions of oxides of nitrogen (NO_x = NO + NO₂, where NO is nitric oxide and NO₂ is nitrogen dioxide). This latter disadvantage (i.e., higher emissions of oxides of nitrogen) is the focus of this review article. NO_x formation mechanisms are complex and affected by several different features (e.g., size, operating points, combustion chamber design, fuel system design, and air system design) of internal combustion engines. The slight differences in properties between biodiesel and petroleum diesel fuels are enough to create several changes to system and combustion behaviors of diesel engines. Combined, these effects lead to several complex and interacting mechanisms that make it difficult to fundamentally identify how biodiesel affects NO_x emissions. Instead, it is perhaps better to say that several parameters seem to most strongly influence observed differences in NO_x emissions with biodiesel, thus introducing several possibilities for inconsistency in the trends. These parameters are injection timing, adiabatic flame temperature, radiation heat transfer, and ignition delay. This article provides a review of the rich literature describing these parameters, and provides additional insight into the system responses that are manifested by the use of biodiesel.     

Effect of ethanol blending with biodiesel on engine performance and exhaust emissions in a CI engine

The use of biodiesel as an alternative diesel engine fuel is increasing rapidly. However, due to technical deficiencies, they are rarely used purely or with high percentages in unmodified diesel engines. Therefore, in this study, we used ethanol as an additive to research the possible use of higher percentages of biodiesel in an unmodified diesel engine. Commercial diesel fuel, 20% biodiesel and 80% diesel fuel, called here as B20, and 80% biodiesel and 20% ethanol, called here as BE20, were used in a single cylinder, four strokes direct injection diesel engine. The effect of test fuels on engine torque, power, brake specific fuel consumption, brake thermal efficiency, exhaust gas temperature, and CO, CO₂, NO_x and SO₂ emissions was investigated. The experimental results showed that the performance of CI engine was improved with the use of the BE20 especially in comparison to B20. Besides, the exhaust emissions for BE20 were fairly reduced.     

Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends

In this study, performance of a diesel engine operated with Jatropha and Palm biodiesel blends at high idling conditions has been evaluated. The result obtained from experiment elucidate that, at all idling modes HC and CO emissions of both blends decreases, however, NO_x emissions increases compared to pure diesel fuel. Jatropha biodiesel has higher viscosity compared to Palm biodiesel, which might have degraded the spray characteristics and caused slightly improper mixing which might have led to slightly incomplete combustion, thus at both idling conditions, Jatropha blends emitted higher CO and HC compared to Palm biodiesels. Compared to diesel fuel, CO emissions were 5.9–9.7%, 17.6–22.6%, 23.5–29%, 2.9–6.4%, 5.9–14.5% and 11.8–17.74% less, HC emissions were 10.3–11.5%, 24.13–30.76%, 34.5–39%, 6.9–7.7%, 26–27% and 31–35% less and NO_x emissions were 8.3–9.5%, 14–15%, 22–25%, 5–7.14%, 10–11.3% and 17–18% more respectively for 5, 10 and 20% blends of Palm and Jatropha biodiesel. Compared to diesel fuel, at high idling conditions brake specific fuel consumption all Palm and Jatropha biodiesel–diesel blends increased. Compared to diesel fuel, BSFC were 1.14–1.35%, 2.28–2.96%, 7.1–8.35%, 2.28–2.69%, 3.98–5.39% and 8.83–9.29% more respectively for 5, 10 and 20% blends of Palm and Jatropha biodiesel.     

The impacts of compression ratio on the performance and emissions of ice powered by oxygenated fuels: A review

Energy sources are becoming a governmental issue, with cost and stable supply as the main concern. Oxygenated fuels production is cheap, simple and eco-friendly, as a well as can be produced locally, cutting down on transportation fuel costs. Oxygenated fuels are used directly in an engine as a pure fuel, or they can be blended with fossil fuel. The most common fuels that are conceded under oxygenated fuels are ethanol, methanol, butanol Dimethyl Ether (DME), Ethyl tert-butyl ether (ETBE), Methyl tert-butyl ether (MTBE) and biodiesel that have attracted the attention of researchers. Due to the higher heat of vaporization, high octane rating, high flammability temperature, and single boiling point, the oxygenated fuels have a positive impact on the engine performance, combustion, and emissions by allowing the increase of the compression ratio. Oxygenated fuels also have a considerable oxygen content that causes clean combustion. The aim of this paper was to systematically review the impact of compression ratio (CR) on the performance, combustion and emissions of internal combustion engines (ICE) that are operated with oxygenated fuels that could potentially replace petroleum-based fuels or to improve the fuel properties. The higher octane rating of oxygenated fuels can endure higher compression ratios before an engine starts knocking, thus giving an engine the ability to deliver more power efficiently and economically. One of the more significant findings to emerge from this review study was the slight increases or decreases in power when oxygenated fuel was used at the original CR in ICE engines. Also, CO, HC, and NOx emissions decreased while the fuel consumption (FC) increased. However, at higher CR, the engine performance increased and fuel consumption decreased for both SI and CI engines. It was seen the NOx, CO and CO₂ emissions of oxygenated fuels decreased with the increasing CR in the SI engine, but the HC increased. Meanwhile, in CI engine, the HC, CO and NOx decreased as the CR increased with biodiesel fuel.     

Influence of pentanol and dimethyl ether blending with diesel on the combustion performance and emission characteristics in a compression ignition engine under low temperature combustion mode

Dimethyl ether (DME) and n-pentanol can be derived from non-food based biomass feedstock without unsettling food supplies and thus attract increasing attention as promising alternative fuels, yet some of their unique fuel properties different from diesel may significantly affect engine operation and thus limit their direct usage in diesel engines. In this study, the influence of n-pentanol, DME and diesel blends on the combustion performance and emission characteristics of a diesel engine under low-temperature combustion (LTC) mode was evaluated at various engine loads (0.2–0.8 MPa BMEP) and two Exhaust Gas Recirculation (EGR) levels (15% and 30%). Three test blends were prepared by adding different proportions of DME and n-pentanol in baseline diesel and termed as D85DM15, D65P35, and D60DM20P20 respectively. The results showed that particulate matter (PM) mass and size-resolved PM number concentration were lower for D85DM15 and D65P35 and the least for D60DM20P20 compared with neat diesel. D60DM20P20 turned out to generate the lowest NO_x emissions among the test blends at high engine load, and it further reduced by approximately 56% and 32% at low and medium loads respectively. It was found that the combination of medium EGR (15%) level and D60DM20P20 blend could generate the lowest NO_x and PM emissions among the tested oxygenated blends with a slight decrease in engine performance. THC and CO emissions were higher for oxygenated blends than baseline diesel and the addition of EGR further exacerbated these gaseous emissions. This study demonstrated a great potential of n-pentanol, DME and diesel (D60DM20P20) blend in compression ignition engines with optimum combustion and emission characteristics under low temperature combustion mode, yet long term durability and commercial viability have not been considered.     

Effects of 30% v/v biodiesel/diesel fuel blend on regulated and unregulated pollutant emissions from diesel engines

Two Euro 3 commercial trucks fuelled with a 30% v/v biodiesel/diesel fuel blend (B30) and pure diesel fuel were tested in laboratory under the standard driving conditions (UDC and EUDC driving cycles) and the CADC “URBAN” test cycle, in order to evaluate the fuel consumption, regulated (CO, HC, NO_x, PM) and unregulated emissions (aldehydes and polycyclic aromatic hydrocarbons).