Adsorption characteristics of As(III) from aqueous solution on iron oxide coated cement (IOCC)

Contamination of potable groundwater with arsenic is a serious health hazard, which calls for proper treatment before its use as drinking water. The objective of the present study is to assess the effectiveness of iron oxide coated cement (IOCC) for As(III) adsorption from aqueous solution. Batch studies were conducted to study As(III) adsorption onto IOCC at ambient temperature as a function of adsorbent dose, pH, contact time, initial arsenic concentration and temperature. Kinetics reveal that the uptake of As(III) ion is very rapid and most of fixation occurs within the first 20 min of contact. The pseudo-second order rate equation successfully described the adsorption kinetics. Langmuir, Freundlich, Redlich-Peterson (R-P), and Dubinin-Radushkevich (D-R) models were used to describe the adsorption isotherms at different initial As(III) concentrations and at 30 g l(-1) fixed adsorbent dose. The maximum adsorption capacity of IOCC for As(III) determined from the Langmuir isotherm was 0.69 mg g(-1). The mean free energy of adsorption (E) calculated from the D-R isotherm was found to be 2.86 kJ mol(-1) which suggests physisorption. Thermodynamic parameters indicate an exothermic nature of adsorption and a spontaneous and favourable process. The results suggest that IOCC can be suitably used for As(III) removal from aqueous solutions.     

Arsenic removal from an aqueous solution by modified A. niger biomass: batch kinetic and isotherm studies

Batch studies were conducted to examine the adsorption kinetics and adsorption capacity of iron oxide-coated biomass (IOCB) for As(III) and As(V). The optimum pH for As(V) and As(III) removal was found to be 6. The equilibrium time for removal of arsenic was found to be approximately 7 h. The adsorption of As(V) on IOCB was rapid compared to that of As(III) adsorption. An increase in temperature (from 5 to 30 °C) was found to increase As(III) removal, whereas in the case of As(V), the removal increased with temperature from 5 to 10 °C, but remained relatively constant thereafter up to 30 °C. The pseudo-second order rate equation was found to describe better the kinetics of arsenic adsorption than other equations. The isotherm data for As(V) removal fitted better with the Langmuir equation compared with other tested models and the isotherm data for As(III) removal fitted better with Redlich–Peterson equation than other tested models. Iron oxide-coated fungal biomass (A. niger) was found to be efficient in removing arsenic from an aqueous solution.     

Adsorptive removal of acrylonitrile by commercial grade activated carbon: kinetics, equilibrium and thermodynamics

The potential of activated carbons--powdered (PAC) and granular (GAC), for the adsorption of acrylonitrile (AN) at different initial AN concentrations (50相似文献   

Removal of As(V) and As(III) by reclaimed iron-oxide coated sands

This paper aims at the feasibility of arsenate and arsenite removal by reclaimed iron-oxide coated sands (IOCS). Batch experiments were performed to examine the adsorption isotherm and removal performance of arsenic systems by using the IOCS. The results show that the pH(zpc) of IOCS was about 7.0 +/- 0.4, favoring the adsorption of As(V) of anion form onto the IOCS surface. As the adsorbent dosage and initial arsenic concentration were fixed, both the As(V) and As(III) removals decrease with increasing initial solution pH. Under the same initial solution pH and adsorbent dosage, the removal efficiencies of total arsenic (As(V) and As(III)) were in the order as follows: As(V)>As(V)+As(III)>As(III). Moreover, adsorption isotherms of As(V) and As(III) fit the Langmuir model satisfactorily for the four different initial pH conditions as well as for the studied range of initial arsenic concentrations. It is concluded that the reclaimed IOCS can be considered as a feasible and economical adsorbent for arsenic removal.     

Adsorption of boron from aqueous solutions using fly ash: batch and column studies

In the present paper, boron removal from aqueous solutions by adsorption was investigated. Fly ash particle size used in adsorption experiments was between 250 and 400 microm. During the experimental part of this study, the effect of parameters such as pH, agitation time, initial boron concentration, temperature, adsorbent dosage and foreign ion on boron removal were observed. In addition, adsorption kinetics, adsorption isotherm studies and column studies were made. Maximum boron removal was obtained at pH 2 and 25 degrees C. Thermodynamic parameters such as change in free energy (DeltaG degrees), enthalpy (DeltaH degrees), entropy (DeltaS degrees) were also determined. As a result of the kinetic studies, it was observed that the adsorption data conforms to the second degree kinetics model. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was determined that the experimental data conformed to Langmuir isotherm model. Batch adsorbent capacity (q(o)) was calculated as 20.9 mg/g. The capacity value for column study was obtained by graphical integration as 46.2 mg/g. The Thomas and the Yoon-Nelson models were applied to experimental data to predict the breakthrough curves and to determine the characteristics parameters of the column useful for process design.     

Effects of adsorbent dose, its particle size and initial arsenic concentration on the removal of arsenic, iron and manganese from simulated ground water by Fe3+ impregnated activated carbon

This paper presents the observations of the study on arsenic removal from a contaminated ground water (simulated) by adsorption onto Fe³⁺ impregnated granular activated carbon (GAC-Fe). Fe²⁺, Fe³⁺ and Mn²⁺ have also been considered along with arsenic species in the water sample. Similar study has also been done with untreated granular activated carbon (GAC) for comparison. The effects of adsorbent dose, particle size of adsorbent and initial arsenic concentration on the removal of As(T), As(III), As(V), Fe²⁺, Fe³⁺ and Mn²⁺ have been discussed. Under the experimental conditions, the optimum adsorbent doses for GAC-Fe and GAC have been found to be 8 g/l and 24 g/l, respectively with an agitation time of 15 h. Particle size of the adsorbents (both GAC and GAC-Fe) has shown negligible effect on the removal of arsenic and Fe species. However, for Mn removal the effect of adsorbent particle size is comparatively more. Percentage removal of As(T), As(V) and As(III) increase with the decrease in initial arsenic concentration (As₀). However, the increase in percentage removal of all the arsenic species with decrease in As₀ are less for higher value of As₀ (3000–500 ppb) than those of the lower value of As₀ (500–10 ppb). The % removal of As(T), As(III), As(V), Fe, and Mn were 95%, 92.4%, 97.6%, 99% and 41.2%, respectively when 8 g/l GAC-Fe was used at the As₀ value of 200 ppb. However, for GAC these values were 55.5%, 44%, 71%, 98% and 97%. The pH and temperature of the study were 7 ± 0.1 and 30 ± 1 °C, respectively.     

Adsorptive removal of cationic (BY2) dye from aqueous solutions onto Turkish clay: Isotherm,kinetic, and thermodynamic analysis

ABSTRACT

The removal of Basic Yellow 2 (BY2), a cationic dye, from aqueous solution by using montmorillonite as adsorbent was studied in batch experiments. The effect of pH, agitation speed, adsorbent dosage, initial dye concentration ionic strength, and temperature on the removal of BY2 was also investigated. Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms were applied to fit the adsorption data of BY2 dye. Equilibrium data were well described by the typical Langmuir adsorption isotherm. The maximum monolayer adsorption capacity was calculated as 434.196 mg g^?1 from the Langmuir isotherm model. The adsorption data was fitted to both the pseudo-first-order, pseudo-second-order, Elovich, and intraparticle kinetic models, and the calculated values of the amount adsorbed at equilibrium (q_e) by pseudo-second-order equations were found to be in good agreement with the experimental values. The thermodynamic factors were also evaluated. The entropy change (ΔS*) was negative, suggesting that the adsorption process decreases in entropy and enthalpy change (ΔH*) was positive which indicates endothermic nature. The positive ΔG* value confirms the un-spontaneity of the process. In addition, a semiempirical model was calculated from kinetic data.     

Spent tea leaves: a new non-conventional and low-cost adsorbent for removal of basic dye from aqueous solutions

In the present study, spent tea leaves (STL) were used as a new non-conventional and low-cost adsorbent for the cationic dye (methylene blue) adsorption in a batch process at 30 degrees C. Equilibrium sorption isotherms and kinetics were investigated. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models of adsorption. The adsorption isotherm data were fitted well to the Langmuir isotherm and the monolayer adsorption capacity was found to be 300.052mg/g at 30 degrees C. The kinetic data obtained at different initial concentrations were analyzed using pseudo-first-order, pseudo-second-order and intraparticle diffusion equations. The results revealed that the spent tea leaves, being waste, have the potential to be used as a low-cost adsorbent for the removal of methylene blue from aqueous solutions.     

Chromium(VI) adsorption from aqueous solution by Hevea Brasilinesis sawdust activated carbon

Adsorption capacity of Cr(VI) onto Hevea Brasilinesis (Rubber wood) sawdust activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH and temperature. Cr(VI) removal is pH dependent and found to be maximum at pH 2.0. Increases in adsorption capacity with increase in temperature indicate that the adsorption reaction is endothermic. Based on this study, the thermodynamic parameters like standard Gibb's free energy (DeltaG degrees ), standard enthalpy (DeltaH degrees ) and standard entropy (DeltaS degrees ) were evaluated. Adsorption kinetics of Cr(VI) ions onto rubber wood sawdust activated carbon were analyzed by pseudo first-order and pseudo second-order models. Pseudo second-order model was found to explain the kinetics of Cr(VI) adsorption most effectively. Intraparticle diffusion studies at different temperatures show that the mechanism of adsorption is mainly dependent on diffusion. The rate of intraparticle diffusion, film diffusion coefficient and pore diffusion coefficient at various temperatures were evaluated. The Langmuir, Freundlich and Temkin isotherm were used to describe the adsorption equilibrium studies of rubber wood sawdust activated carbon at different temperatures. Langmuir isotherm shows better fit than Freundlich and Temkin isotherm in the temperature range studied. The result shows that the rubber wood sawdust activated carbon can be efficiently used for the treatment of wastewaters containing chromium as a low cost alternative compared to commercial activated carbon and other adsorbents reported.     

Consequence of chitosan treating on the adsorption of humic acid by granular activated carbon

In this work, equilibrium and kinetic adsorption of humic acid (HA) onto chitosan treated granular activated carbon (MGAC) has been investigated and compared to the granular activated carbon (GAC). The adsorption equilibrium data showed that adsorption behaviour of HA could be described reasonably well by Langmuir adsorption isotherm for GAC and Freundlich adsorption isotherm for MGAC. It was shown that pre-adsorption of chitosan onto the surface of GAC improved the adsorption capacity of HA changing the predominant adsorption mechanism. Monolayer capacities for the adsorption of HA onto GAC and MGAC were calculated 55.8 mg/g and 71.4 mg/g, respectively. Kinetic studies showed that film diffusion and intra-particle diffusion were simultaneously operating during the adsorption process for MGAC.     

Ni(II) removal from aqueous solutions using cone biomass of Thuja orientalis

The biomass of terrestrial-plant materials has high removal capacities for a number of heavy metal ions. The Ni(II) biosorption capacity of the cone biomass of Thuja orientalis was studied in the batch mode. The biosorption equilibrium level was determined as a function of contact time, pH, temperature, agitation speed at several initial metal ion and adsorbent concentrations. The removal of Ni(II) from aqueous solutions increased with adsorbent concentration, temperature and agitation speed of the solution were increased. The biosorption process was very fast; 90% of biosorption occurred within 3 min and equilibrium was reached at around 7 min. It is found that the biosorption of Ni(II) on the cone biomass was correlated well (R2 > 0.99) with the Langmuir equation as compared to Freundlich, BET Temkin and D-R isotherm equation under the concentration range studied. According to Langmuir isotherm, the monolayer saturation capacity (Q(o)) is 12.42 mg g(-1). The pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models were applied to test the experimental data for initial Ni(II) and cone biomass concentrations. The pseudo-second-order kinetic model provided the best correlation of the used experimental data compared to the pseudo-first-order and intraparticle diffusion kinetic models. The activation energy of biosorption (E(a)) was determined as 36.85 kJ mol(-1) using the Arrhenius equation. This study indicated that the cone biomass of T. orientalis can be used as an effective and environmentally friendly adsorbent for the treatment of Ni(II) containing aqueous solutions.     

Removal of Acid Violet 17 from aqueous solutions by adsorption onto activated carbon prepared from sunflower seed hull

The adsorption of Acid Violet 17 (AV17) was carried out using various activated carbons prepared from sunflower seed hull (SSH), an agricultural solid waste by-product. The effect of parameters such as agitation time, initial dye concentration, adsorbent dosage, pH and temperature were studied. The Langmuir and Freundlich isotherm models were applied and the Langmuir model was found to best report the equilibrium isotherm data. Langmuir adsorption capacity was found to be 116.27 mg/g. Kinetic data followed pseudo-second-order kinetics. Maximum colour removal was observed at pH 2.0. It was observed that the rate of adsorption improves with increasing temperature and the process is endothermic. The adsorbent surface was analysed with a scanning electron microscope. The results indicate that activated sunflower seed hull could be an attractive option for colour removal from dilute industrial effluents.     

A laboratory study for the treatment of arsenic, iron, and manganese bearing ground water using Fe(3+) impregnated activated carbon: effects of shaking time, pH and temperature

This paper deals with the experimental investigation related to removal of arsenic from a simulated contaminated ground water by the adsorption onto Fe(3+) impregnated granular activated carbon (GAC-Fe) in presence of Fe(2+), Fe(3+), and Mn(2+). Similar study has also been done with granular activated carbon (GAC) for comparison. The effects of shaking time, pH, and temperature on the percentage removal of As(T), As(III), As(V), Fe(2+), Fe(3+), and Mn have been discussed. The shaking time for optimum removal of arsenic species has been noted as 8h for GAC-Fe and 12h for GAC, respectively. As(T) removal was less affected by the change in pH within the pH range of 2-11. Maximum removal of As(V) and As(III) was observed in the pH range of 5-7 and 9-11, respectively, for both the adsorbents. Under the experimental conditions at 30 degrees C, the optimum removal of As(T), As(III), As(V), Fe, and Mn are 95.5%, 93%, 98%, 100%, and 41%, respectively, when GAC-Fe is used. For GAC these values are 56%, 41%, 71%, 99%, and 98%. The adsorbent dose (AD) and its particle size (PS) for both GAC and GAC-Fe were 30 g/l and 125-150 mum, respectively. The initial arsenic concentration in the synthetic water sample was 200 ppb.     

Equilibrium and kinetic studies for the biosorption system of copper(II) ion from aqueous solution using Tectona grandis L.f. leaves powder

The biosorption of copper(II) ions from aqueous solution by Tectona grandis L.f. was studied in a batch adsorption system as a function of pH, metal ion concentration, adsorbent concentration and adsorbent size. The biosorption capacities and rates of copper(II) ions onto T. grandis L.f. were evaluated. The Langmuir, Freundlich, Redlich-Peterson and Temkin adsorption models were applied to describe the isotherms and isotherm constants. Biosorption isothermal data could be well interpreted by the Langmuir model with maximum adsorption capacity of 15.43 mg/g of copper(II) ion on T. grandis L.f. leaves powder. The kinetic experimental data properly correlated with the second-order kinetic model. Various thermodynamic parameters such as deltaG(o), deltaH(o), and deltaS(o) were calculated indicating that this system was a spontaneous and exothermic process.     

Hydrothermal synthesis of NH2-UiO-66 and its application for adsorptive removal of dye

In this research paper we report hydrothermal synthesis of NH₂-UiO-66, a metal organic framework (MOF) with zirconium as metal and amino terephthalic acid as a linker. The synthesized MOF was characterized by XRD, FTIR, SEM and BET surface area. As a potential application in water treatment, an adsorptive removal of safranin dye was studied using the synthesized material. The effect of initial concentration and pH of the dye solution was studied on the dye adsorption capacity of the material. An optimum set of conditions resulting into maximum dye adsorption was found out. The maximum adsorption capacity of the MOF was observed to be 390?mg/g at neutral pH of the solution and at room temperature. The experimental data was fitted with Langmuir, Freundlich and Temkin adsorption isotherm models. The kinetics of adsorption was studied using pseudo first order and pseudo second order model. The dye adsorption mechanism was also attempted.     

Adsorption of basic dye on high-surface-area activated carbon prepared from coconut husk: equilibrium, kinetic and thermodynamic studies

Adsorption isotherm and kinetics of methylene blue on activated carbon prepared from coconut husk were determined from batch tests. The effects of contact time (1-30 h), initial dye concentration (50-500 mg/l) and solution temperature (30-50 degrees C) were investigated. Equilibrium data were fitted to Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The equilibrium data were best represented by Langmuir isotherm model, showing maximum monolayer adsorption capacity of 434.78 mg/g. The kinetic data were fitted to pseudo-first-order, pseudo-second-order and intraparticle diffusion models, and was found to follow closely the pseudo-second-order kinetic model. Thermodynamic parameters such as standard enthalpy (DeltaH degrees), standard entropy (DeltaS degrees) and standard free energy (DeltaG degrees) were evaluated. The adsorption interaction was found to be exothermic in nature. Coconut husk-based activated carbon was shown to be a promising adsorbent for removal of methylene blue from aqueous solutions.     

Equilibrium and kinetic data and process design for adsorption of Congo Red onto bentonite

The adsorption of Congo Red onto bentonite in a batch adsorber has been studied. Four kinetic models, the pseudo first- and second-order equations, the Elovich equation and the intraparticle diffusion equation, were selected to follow the adsorption process. Kinetic parameters; rate constants, equilibrium adsorption capacities and correlation coefficients, for each kinetic equation were calculated and discussed. It was shown that the adsorption of Congo Red onto bentonite could be described by the pseudo second-order equation. The experimental isotherm data were analyzed using the Langmuir, Freundlich and Temkin equations. Adsorption of Congo Red onto bentonite followed the Langmuir isotherm. A single stage batch adsorber was designed for different adsorbent mass/treated effluent volume ratios using the Langmuir isotherm.     

Silica particles settling characteristics and removal performances of oxide chemical mechanical polishing wastewater treated by electrocoagulation technology

This study aimed at investigating the feasibility of using jackfruit peel (JFP), a solid waste, abundantly available in Malaysia, for the adsorption of methylene blue, a cationic dye. Batch adsorption studies were conducted to evaluate the effects of contact time, initial concentration (35-400mg/L), pH (2-11), and adsorbent dose (0.05-1.20g) on the removal of dye at temperature of 30 degrees C. The experimental data were analyzed by the four different types of linearized Langmuir isotherm, the Freundlich isotherm and the Temkin isotherm. The experimental data fitted well with the type 2 Langmuir model with a maximum adsorption capacity of 285.713mg/g. Pseudo-first and pseudo-second-order kinetics models were tested with the experimental data, and pseudo-second-order kinetics was the best for the adsorption of MB by JFP with coefficients of correlation R(2)> or =0.9967 for all initial MB concentrations studied. The results demonstrated that the JFP is very effective for the adsorption of methylene blue (MB) from aqueous solutions.     

Adsorption isotherm and kinetic modeling of 2,4-D pesticide on activated carbon derived from date stones

In this work, the adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) on activated carbon derived from date stones (DSAC) was studied with respect to pH and initial 2,4-D concentration. The experimental data were analyzed by the Freundlich isotherm, the Langmuir isotherm, and the Temkin isotherm. Equilibrium data fitted well with the Langmuir model with maximum adsorption capacity of 238.10 mg/g. Pseudo-first and pseudo-second-order kinetics models were tested with the experimental data, and pseudo-first-order kinetics was the best for the adsorption of 2,4-D by DSAC with coefficients of correlation R(2)>or=0.986 for all initial 2,4-D concentrations studied. The results indicated that the DSAC is very effective for the adsorption of 2,4-D from aqueous solutions.