Poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride)/silica nanocomposites derived from in situ suspension polymerization

Poly(vinyl chloride‐co‐vinyl acetate‐co‐maleic anhydride) (PVVM)/silica nanocomposites were prepared by the suspension radical copolymerization of the monomers in the presence of fumed silica premodified with γ‐methylacryloxypropl trimethoxy siliane. Morphological observation showed that the silica particles of nanometer scale were well dispersed in the copolymer matrix of the nanocomposites films, whereas silica particles tended to agglomerate in the composites films prepared by the solution blending of PVVM with silica. The experimental results show that the thermal stability, glass‐transition temperature, tensile strength, and Young's modulus were significantly enhanced by the incorporation of silica nanoparticles. The enhancement of properties was related to the better dispersion of silica particles in polymer matrix and the interaction between the polymer chains and the surfaces of the silica particles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(ethylene‐vinyl co‐vinyl acetate)/clay nanocomposites: Mechanical,morphology, and thermal behavior

Nanocomposites of ethylene‐vinyl acetate copolymer (EVAL) with Dellite organoclay were prepared in a laboratory extruder. The extent of intercalation of the nanocomposites was studied by field emission scanning electron microscopy and X‐ray diffraction. It was established that the organoclay is well dispersed and preferentially embedded in the EVAL phase. Further, the intercalation degree of the organoclay decreased with increasing organoclay content. The mechanical properties of the nanocomposites were studied as a function of clay loading and EVAL type. The nanocomposites exhibited enhanced thermal stability as seen in thermogravimetric studies. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Poly(ethylene‐co‐vinyl acetate)/calcium phosphate nanocomposites: Thermo mechanical and gas permeability measurements

Poly(ethylene‐co‐vinyl acetate) (EVA)/Calcium phosphate nanocomposites were prepared by melt mixing in a Brabender plasticoder. Nanoparticles of calcium phosphate were synthesized by the polymer‐mediated synthesis and characterized by X‐ray diffractometry and transmission electron microscopy. Mechanical properties such as tensile strength, tensile modulus, tear strength, etc., were measured with respect to the filler loading. Thermal stability of the composites under nitrogen atmosphere was also measured. The composites showed better thermal stability due to the nanoreinforcement. Oxygen gas permeability of the composites showed considerable decrease due to tortuous path created by the nanofillers. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Poly(hydroxybutyrate‐co‐hydroxyvalerate)/titanium dioxide nanocomposites: A degradation study

Nanocomposites, based on a poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) matrix and titanium dioxide (TiO₂) nanoparticles and fabricated with a solvent‐casting technique, were characterized with differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The content of TiO₂ nanoparticles varied between 0.5 and 10 wt %. Degradation studies, including hydrolytic degradation in a strong base medium (1N NaOH) and degradation under ultraviolet light at 365 nm, were performed. It was confirmed that the inorganic filler had no great influence on thermal properties such as the melting and crystallization temperatures. Improved degradation temperatures were also confirmed with the increase in the filler content. Degradation observations confirmed significant increases in hydrolytic erosion with the filler content increasing in comparison with the degradation of a pure PHBV film. Also, the photocatalytic activity of the inorganic filler TiO₂ in all investigated composites [irradiated at λ = 365 nm and immersed in a liquid medium (H₂O)] was evaluated. The degraded samples were analyzed with Fourier transform infrared spectroscopy, which confirmed their increased crystallinity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(ethylene‐co‐vinyl acetate)/calcium phosphate nanocomposites: Mechanical,gas permeability,and molecular transport properties

Poly(ethylene‐co‐vinyl acetate) (EVA)‐based nanocomposites were prepared by melt mixing in an internal mixer with nanocalcium phosphate in different weight percentages. The nanocalcium phosphate with 10‐nm size was prepared by the polymer‐induced crystallization technique. The mechanical properties as well as the gas permeability tests were performed to analyze the effect of nanofiller incorporation in to the polymer. Molecular transport of different solvents such as water, benzene, and n‐heptane was undertaken at room temperature for EVA nanocomposites with 0, 3, and 5% filler loading. Among the three, water showed less uptake and benzene showed maximum uptake. Transport parameters such as diffusion coefficient, sorption coefficient, and permeation coefficient were calculated, and all of them showed a decrease with respect to the filler loading. First‐order kinetics model was applied to investigate the transport kinetics. Also, the sorption curves were compared to theoretical predictions and found to be in good agreement except for water. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication,characterization, and properties of poly(ethylene‐co‐vinyl acetate)/magnetite nanocomposites

Poly(ethylene‐co‐vinyl acetate) (EVA)/magnetite (Fe₃O₄) nanocomposite was prepared with different loading of Fe₃O₄ nanoparticles. The mixing and compounding were carried out on a two‐roll mixing mill and the sheets were prepared in a compression‐molding machine. The effect of loading of nanoparticles in EVA was investigated thoroughly by different characterization technique such as transmission electron microscopy (TEM), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and technological properties. TEM analysis showed the uniform dispersion of filler in the polymer matrix and the dispersion of filler decreased with increase in filler content. XRD of the nanocomposite revealed the more ordered structure of the polymer chain. An appreciable increase in glass transition temperature was observed owing to the restricted mobility of Fe₃O₄‐filled EVA nanocomposite. TGA and flame resistance studies indicated that the composites attain better thermal and flame resistance than EVA owing to the interaction of filler and polymer segments. Mechanical properties such as tensile strength, tear resistance, and modulus were increased for composites up to 7 phr of filler, which is presumably owing to aggregation of Fe₃O₄ nanoparticle at higher loading. The presence of Fe₃O₄ nanoparticles in the polymer matrix reduced the elongation at break and impact strength while improved hardness of the composite than unfilled EVA. The change in technological properties had been correlated with the variation of polymer–filler interaction estimated from the swelling behavior. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40116.     

Synthesis and characterization of poly(urethane‐benzoxazine)/clay hybrid nanocomposites

Poly(urethane‐benzoxazine)/clay hybrid nanocomposites (PU/Pa–OMMTs) were prepared from an in situ copolymerization of a polyurethane (PU) prepolymer and a monofunctional benzoxazine monomer, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine (Pa), in the presence of an organophilic montmorillonite (OMMT), by solvent method using DMAc. OMMT was made from cation‐exchange of Na‐montmorillonite (MMT) with dodecyl ammonium chloride. The formation of the exfoliated nanocomposite structures of PU/Pa‐OMMT was confirmed by XRD from the disappearance of the peak due to the basal diffraction of the layer‐structured clay found in both MMT and OMMT. DSC showed that, in the presence of OMMT, the curing temperature of PU/Pa lowered by ca. 60°C for the onset and ca. 20°C for the maximum. After curing at 190°C for 1 h, the exothermic peak on DSC disappeared. All the obtained films of PU/Pa–OMMT were deep yellow and transparent. As the content of OMMT increased, both the tensile modulus and strength of PU/Pa–OMMT films increased, while the elongation decreased. The characteristics of the PU/Pa–OMMT films changed from plastics to elastomers depending on OMMT content and PU/Pa ratio. PU/Pa–OMMT films also exhibited excellent resistance to the solvents such as tetrahydrofuran, N,N‐dimethylformamide and N‐methyl‐2‐pyrrolidinone. The thermal stability of PU/Pa were enhanced remarkably even with small amount of OMMT. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4075–4083, 2003     

Optimization of fusion behavior of the nanocomposites based on poly(vinyl chloride)/poly(epichlorohydrin‐co‐ethylene oxide)/organoclay

In this work, poly(vinyl chloride)/poly(epichlorohydrin‐co‐ethylene oxide) (PVC/ECO)/organoclay nanocomposites were prepared via melt processing and their fusion behaviors were comprehensively investigated. In this way, response surface methodology was employed to study the main and interactive effects of three parameters (Cloisite 30B content, ECO content, and rotor speed) on fusion of the PVC matrix. The results showed that ECO rubber has a negative influence on the fusion process, while optimal levels of other parameters are appropriate. Furthermore, the interactive plots revealed significant mutual effects of the parameters. Also, optimized levels of the parameters for achieving the best response were obtained by using contour plots. Since additives in PVC compounds have considerable effects on the fusion phenomenon, the results of the present study could be important from industrial point of view. J. VINYL ADDIT. TECHNOL., 25:98–105, 2019. © 2018 Society of Plastics Engineers     

Uniaxial drawing of poly(vinyl alcohol)/graphene oxide nanocomposites

The unique potential of graphene oxide (GO) was exploited in the nanocomposites by a simple uniaxial drawing (up to three times) of poly(vinyl alcohol) (PVA)/GO nanocomposites with a small amount loading of GO. From X-ray diffraction images, the PVA crystallites were found to be oriented parallel to the drawn direction. At the same time, exfoliated GO platelets were found to be aligned parallel to the film surface. Compared with the properties of the as-cast nanocomposites, those of the uniaxially drawn nanocomposites were found to be remarkably enhanced. For the mechanical properties, not only Young’s modulus and tensile strength but also the toughness of the nanocomposites increased by the uniaxial drawing. It was revealed that 260% increase in toughness was achieved for the drawn nanocomposite with 1% w/w GO loading. Significant suppression of the swelling in water resulted in the excellent barrier properties against water, which exceeded that of the conventional high-barrier polymer, such as poly(vinylidene chloride). We revealed that this simple, fast and environmentally friendly process of uniaxial drawing exploits the excellent properties and high aspect ratio of GO in the nanocomposites.     

Poly(ethylene‐co‐vinyl acetate) blends with phenoxy

EVA was blended with phenoxy over the whole range of composition using a twin‐screw Brabender. Two‐phase separation caused by EVA crystallization was observed in the EVA‐rich blends and the dispersed domain of EVA was not clearly shown in the phenoxy‐rich blends. Differential scanning calorimetry (DSC) showed that the glass transition temperature (T_g) of EVA was increased by 5–10°C in the EVA‐rich blends but the T_g of phenoxy was superposed over the melting behavior of EVA. X‐ray diffraction measurement indicated that EVA crystallization was restricted in the phenoxy‐rich blends and the EVA crystal structure was influenced by incorporation of phenoxy into the EVA‐rich blends. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 227–236, 1999     

Ternary Poly(styrene‐co‐acrylonitrile)/Poly(vinyl chloride) Blend Composites with Multi‐Walled Carbon Nanotubes and Enhanced Physical Characteristics

We report a ternary system of poly(styrene‐co‐acrylonitrile) (SAN), poly(vinyl chloride) (PVC), and multi‐walled carbon nanotube (MWCNT) composites prepared by both a solution blending method and the SOAM. The MWCNT content in the composites was optimized by both TGA and mechanical characterization of binary mixtures of SAN/MWCNT and PVC/MWCNT composites. The dispersion of MWCNTs in the miscible SAN/PVC blends was characterized by FT‐Raman spectroscopy, FE‐SEM, and FE‐TEM. The distribution of MWCNTs in the SAN/PVC blends was examined in terms of their wetting coefficients and minimization of the interfacial energy. Composites prepared using the SOAM method showed superior physical properties to the SAN/PVC blends and SAN/PVC/MWCNT composites prepared using the solution blending method.

     

Layer‐structured poly(vinyl alcohol)/graphene oxide nanocomposites with improved thermal and mechanical properties

Layer‐structured poly(vinyl alcohol)/graphene oxide nanocomposites in the form of films are prepared by simple solution processing. The structure and properties of these nanocomposites are studied using X‐ray diffractions, scanning electron microscopy, Fourier‐transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The results indicate that graphene oxide is dispersed on a molecular scale and aligned in the poly(vinyl alcohol) matrix, and there exists strong interfacial interactions between both components, which are responsible for the significant improvement in the thermal and mechanical properties of the nanocomposites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(acrylonitrile‐co‐vinyl acetate)/Ag composite microspheres: One‐pot fabrication and application as catalyst

Waxberry‐like poly(acrylonitrile‐co‐vinyl acetate)/Ag composite microspheres have been prepared simply and directly via a one‐step self‐assembly approach. The morphology, formation, and catalytic activity of the as‐prepared composite microspheres are further investigated. The difference in the solubility among different segments of poly(acrylonitrile‐co‐vinyl acetate) is the basis of the formation of poly(acrylonitrile‐co‐vinyl acetate) microspheres, while the ? CN groups on the surface of poly(acrylonitrile‐co‐vinyl acetate) microspheres play an important role in the growth process from poly(acrylonitrile‐co‐vinyl acetate) microsphere to poly(acrylonitrile‐co‐vinyl acetate)/Ag composite microsphere. It is found that bulk quantities of composite microspheres with high density of Ag nanoparticles on the surface can be obtained readily by controlling the concentration of AgNO₃. The as‐prepared composite microsphere exhibits excellent catalytic activity on reduction of p‐nitrophenol. This study may shed some light on the self‐assembly of other metal/polymer composite microspheres. POLYM. ENG. SCI., 50:1767–1772, 2010. © 2010 Society of Plastics Engineers     

Poly(ethylene terephthalate)/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate)/clay nanocomposites: Effects of biaxial stretching

In this study, we fabricated poly(ethylene terephthalate) (PET)/clay, PET/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate) (PETG), and PET/PETG/clay nanocomposite plates and biaxially stretched them into films by using a biaxial film stretching machine. The tensile properties, cold crystallization behavior, optical properties, and gas and water vapor barrier properties of the resulting films were estimated. The biaxial stretching process improved the dispersion of clay platelets in both the PETG and PET/PETG matrices, increased the aspect ratio of the platelets, and made the platelets more oriented. Thus, the tensile, optical, and gas‐barrier properties of the composite films were greatly enhanced. Moreover, strain‐induced crystallization occurred in the PET/PETG blend and in the amorphous PETG matrix. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42207.     

Synthesis and characterization of layer-aligned poly(vinyl alcohol)/graphene nanocomposites

Layer-aligned poly(vinyl alcohol)/graphene nanocomposites in the form of films are prepared by reducing graphite oxide in the polymer matrix in a simple solution processing. X-ray diffractions, scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis are used to study the structure and properties of these nanocomposites. The results indicate that graphene is dispersed on a molecular scale and aligned in the poly(vinyl alcohol) (PVA) matrix and there exists strong interfacial interactions between both components mainly by hydrogen bonding, which are responsible for the change of the structures and properties of the PVA/graphene nanocomposites such as the increase in T_g and the decrease in the level of crystallization.     

Oxygen permeability and the mechanical and thermal properties of (low‐density polyethylene)/poly (ethylene‐co‐vinyl acetate)/organoclay blown film nanocomposites

Various (low‐density polyethylene)/poly(ethylene‐co‐vinyl acetate) (LDPE/EVA) nanocomposites containing organoclay were prepared by one‐ and two‐step procedures through melt blending. The resultant nanocomposites were then processed via the film blowing method. From the morphological point of view, X‐ray diffraction and optical microscopy studies revealed that although a prevalent intercalated morphology was evident in the absence of EVA, a remarkable increase of organoclay interlayer spacing occurred in the EVA‐containing systems. The advantages of the addition of EVA to the LDPE/organoclay nanocomposites were confirmed in terms of oxygen barrier properties. In other words, the oxygen transmission rates of the LDPE/EVA/organoclay systems were significantly lower than that of the LDPE/organoclay sample. The LDPE/EVA/organoclay films had better mechanical properties than their counterparts lacking the EVA, a result which could be attributed to the improvement of the organoclay reinforcement efficiency in the presence of EVA. Differential scanning calorimetry and thermogravimetric analysis experiments were performed to follow the effects of the EVA and/or organoclay on the thermal properties of LDPE. Finally, the films produced from the two‐step‐procedure compound showed enhanced oxygen barrier properties and mechanical behavior as compared to the properties of the films produced via the one‐step procedure. J. VINYL ADDIT. TECHNOL., 19:132–139, 2013. © 2013 Society of Plastics Engineers     

Effect of Poly(vinyl pyrrolidone) on Antifouling Properties of Asymmetric Poly(ethylene‐co‐vinyl alcohol) Membranes

Poly(ethylene‐co‐vinyl alcohol)/poly(vinyl pyrrolidone) (EVAL/PVP) blend membranes with antifouling properties were prepared by nonsolvent induced phase separation. Residual PVP in the sample was calculated by infrared spectroscopic data and confirmed by thermogravimetric analysis. The effect of residual PVP on hydrophilicity and permeation characteristics of the membranes was evaluated. Porosity and equilibrium water content of the membranes were influenced by the addition of PVP. The effect of protein fouling on flux using bovine serum albumin as a model system was studied in detail. The residual PVP content could enhance the antifouling property of the membrane. All membranes proved to have sufficient mechanical strength to withstand pressure‐driven filtrations.     

Nonisothermal crystallization of poly(ethylene‐co‐glycidyl methacrylate)/clay nanocomposites

The nonisothermal crystallization of poly(ethylene‐co‐glycidyl methacrylate) (PEGMA) and PEGMA/clay were studied by differential scanning calorimeter, at various cooling rates. Avrami model modified by Jeziorny, Ozawa mode and Liu model could successfully describe the nonisothermal crystallization process. Augis–Bennett model, Kissinger model, Takhor model, and Ziabicki model were used to evaluate the activation energy of both samples. It was found that the activation energy of PEGMA/clay nanocomposite was higher than that of neat PEGMA. Experimental results also indicated that the addition of modified clay might retard the overall nonisothermal crystallization process of PEGMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1335–1343, 2006     

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/clay nanocomposites for replacement of mineral oil based materials

Due to the short‐running of mineral oil and the increasing waste problem, biopolymers become more and more important. However, they still suffer from disadvantages, and in many cases, their properties are still insufficient to replace mineral oil based plastics. In this study, the biobased and biodegradable polymer poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) is reinforced by different clay types and their effect on the properties profile is investigated. Natural as well as organomodified montmorillonite and bentonite are dispersed by melt mixing within the PHBV matrix. Thermal stability, crystallization behavior, and dynamic mechanical properties as well as the materials morphology is analyzed. Dispersion state of the nanoclay is found to be crucial for the improvement of the material performance and well dispersed organomodified clays reveal to simultaneously improve different properties of PHBV matrix. POLYM. COMPOS., 34:1033–1040, 2013. © 2013 Society of Plastics Engineers     

Isothermal crystallization of poly(ethylene‐co‐glycidyl methacrylate)/clay nanocomposites

Poly(ethylene‐co‐glycidyl methacrylate) (PEGMA)/clay nanocomposites with clay concentrations of 1, 3, or 5 wt % were prepared via y melt blending in a twin‐screw extruder. Wide‐angle X‐ray diffraction showed that the clay layers were intercalated by PEGMA. Differential scanning calorimetry was used to analyze the isothermal crystallization, and the equilibrium melting temperature was determined with the Hoffman–Weeks method. The Avrami, Tobin, Malkin, and Urbanovici–Segal models were applied to describe the kinetics of crystallization from the melt state under isothermal conditions. The crystallization kinetics showed that the addition of clay facilitated the crystallization of PEGMA, with the clay functioning as a heterophase nucleating agent; at higher concentrations, however, the physical hindrance of the clay layers to the motion of PEGMA chains retarded the crystallization process. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1051–1064, 2005