Flame retardancy and thermal stability of polyhedral oligomeric silsesquioxane nanocomposites

The flame retardancy and thermal stability of polyhedral oligomeric silsesquioxane (POSS) nanocomposites are reviewed. Results are summarized and compared on the basis of structure–property relationships. Because of the variability of groups attached on POSS, they exhibit different performance in polymer nanocomposites: metal‐containing POSS show good catalytic charring ability; vinyl‐containing and phenyl‐containing POSS promote the strength of char. Improvements in the cone calorimeter (such as reduced peak heat release rate) are advantages of POSS as preceramics for fire retardancy compared with traditional flame retardants, and it will pave the way to the design of inorganic–organic hybrid polymer nanocomposites with enhanced flame retardancy and thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal study on phenyl,hepta isobutyl‐polyhedral oligomeric silsesquioxane/polystyrene nanocomposites

A comparative study concerning the thermal stability of polystyrene (PS) and three polyhedral oligomeric silsesquioxane/polystyrene (POSS/PS) nanocomposites of formula R₇R′(SiO_1.5)₈/PS (where R = isobutyl and R′ = phenyl), at various (3, 5, and 10%) POSS concentration was carried out in both inert (flowing nitrogen) and oxidative (static air) atmospheres. Nanocomposites were synthesized by in situ polymerization of styrene in the presence of POSS and the experimental filler concentration in the obtained compounds, determined by ¹H NMR spectroscopy, was in all cases slightly higher than that in the reactant mixtures. Inherent viscosity (η_inh) determinations indicated that the average molar mass of polymer in the nanocomposites was practically the same than neat PS and were in agreement with calorimetric glass transition temperature (T_g) measurements. The temperature at 5% mass loss (T_5%) and the activation energy (E_a) of degradation process of synthesized nanocomposites were determined and compared with each other and with those of unfilled PS. On the basis of the results from thermal and IR spectroscopy characterizations, nanocomposite with 5% of molecular filler appears the most thermally stable. The results were also compared with literature data on similar PS‐based nanocomposites. POLYM. COMPOS., 2013 © 2013 Society of Plastics Engineers     

Synthesis,structure, and properties of high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane nanocomposites

The organic–inorganic hybrid nanocomposites from high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane (HIPS/POSS) containing various percentages of POSS were prepared by free radical polymerization and characterized by Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, thermal gravity analysis (TGA), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The octavinyl POSS has formed covalent bond connected PS‐POSS hybrid with polystyrene. POSS can well disperse in the composites at the composition of 0.5 and 1 wt%. The mechanical properties and thermostability of HIPS/POSS nanocomposites were significantly improved. The tensile strength, the izod impact strength, and the elongation at break of the nanocomposite containing 1 wt% of POSS was increased, respectively, by 15.73%, 75.62%, and 72.71% in comparison with pristine HIPS. The thermal decomposition temperature of HIPS/POSS (1 wt% of POSS) was 33°C higher than that of pristine HIPS. The HIPS/POSS nanocomposites showed great potential for applications in many fields, such as electric appliance and automotive trim. POLYM. COMPOS. 37:1049–1055, 2016. © 2014 Society of Plastics Engineers     

The synthesis and characterization of polystyrene/magnetic polyhedral oligomeric silsesquioxane (POSS) nanocomposites

Fc-CHCH-C₆H₆-(C₅H₉)₇Si₈O₁₂ (POSS1, Fc: ferrocene) which contain both metal and CC double bond was firstly synthesized by Wittig reaction. The chemical structure of POSS1 was characterized by FTIR, ¹H, ¹³C and ²⁹Si NMR, mass spectrometry and elemental analysis, and the magnetic property of POSS1 have also been studied. Polystyrene composites containing inorganic-organic hybrid polyhedral oligomeric silsesquioxane (POSS1) were prepared by bulk free radical polymerization. XRD and TEM studies indicate that POSS1 is completely dispersed at molecular level in PS matrix when 1 wt% POSS1 is introduced, while some POSS1-rich nanoparticals are present when content of POSS1 is beyond 3 wt%. GPC results show that molecular weight of the PS/POSS1 nanocomposites are increased with addition of POSS1. TGA and TMA data show the thermal stabilities of PS/POSS1 nanocomposites have been improved compared to neat PS. The PS/POSS1 nanocomposites also display higher glass transition temperatures (T_g) in comparison with neat PS. Viscoelastic properties of PS/POSS1 nanocomposites were investigated by DMTA. The results show the storage modulus (E′) values (temperature>T_g) and the loss factor peak values of the PS/POSS1 nanocomposites are higher than that of neat PS. Mechanical properties of the PS/POSS1 nanocomposites are improved compared to the neat PS.     

Peroxide vulcanized EPDM rubber/polyhedral oligomeric silsesquioxane nanocomposites: Vulcanization behavior,mechanical properties,and thermal stability

Effects of two different polyhedral oligomeric silsesquioxane (POSS), an acrylisobutyl POSS (AIBuPOSS) containing an acrylate group along with seven isobutyl group on its cage and an octaisobutyl POSS where the acrylate group is absent, on vulcanization behavior, mechanical properties, and thermal stability of peroxide vulcanized ethylene‐propylene‐diene rubber (EPDM) were investigated. The POSS was incorporated into the EPDM by melt mixing with POSS content of 0–10 part per hundred of rubber (phr). Oscillating disk rheometer analysis revealed that the acrylate group of the POSS are activated by dicumyl peroxide and improves the peroxide crosslinking efficiency of EPDM rubber. Solid state ²⁹Si‐nuclear magnetic resonance spectroscopy analysis and field emission scanning electron microscopy with energy dispersive X‐ray analysis of the EPDM/POSS vulcanizates showed that the AIBuPOSS are covalently grafted onto the EPDM chain during vulcanization and are dispersed uniformly at the nanometer scale in the rubber matrix. The EPDM/AIBuPOSS nanocomposites exhibit great improvement in tensile, tear strength, and modulus with a concurrent increase in elongation‐at‐break. Enhanced thermal stability in the nanocomposite was also observed. POLYM. ENG. SCI., 55:2814–2820, 2015. © 2015 Society of Plastics Engineers     

Synthesis and characterization of differently substituted phenyl hepta isobutyl‐polyhedral oligomeric silsesquioxane/polystyrene nanocomposites

Variously substituted polyhedral oligomeric silsesquioxanes (POSSs)/polystyrene (PS) nanocomposites of general formula R₇R′(SiO_1.5)₈/PS (where R = isobutyl and R′ = 4‐methoxyphenyl, 4‐methylphenyl, 3,5‐dimethylphenyl, 4‐fluorophenyl, 2,4‐difluorophenyl, 4‐chlorophenyl) were prepared by in situ polymerization of styrene in the presence of 5% w/w of POSS. The actual filler concentration in the obtained nanocomposites was checked by ¹H NMR spectroscopy. Scanning electron microscopy and FTIR spectroscopy evidenced the presence of filler‐polymer interactions. Inherent viscosity (η_inh) determinations indicated that the average molar mass of polymer in halogenated derivatives was lower than neat PS, and were in agreement with calorimetric glass transition temperature (T_g) measurements. Finally, a comparative study concerning the thermal stability of synthesized nanocomposites was carried out in both inert (flowing nitrogen) and oxidative (static air) atmospheres into a thermobalance, in the scanning mode, at 10°C min⁻¹, and the temperatures at 5% mass loss (T_5%), of various compounds were determined. The results were discussed and interpreted. POLYM. COMPOS., 35:151–157, 2014. © 2013 Society of Plastics Engineers     

Polyimide and polyhedral oligomeric silsesquioxane nanocomposites for low-dielectric applications

A novel polyimide (PI) hybrid nanocomposite containing polyhedral oligomeric silsesquioxane (POSS) with well defined architecture has been prepared by copolymerization of octakis(glycidyldimethylsiloxy)octasilsesquioxane (Epoxy-POSS), 4,4′-oxydianiline diamine (ODA), and 4,4′-carbonyldiphthalic anhydride (BTDA). In these nanocomposite materials, the equivalent ratio of the Epoxy-POSS and ODA are adjustable, and the resultant PI-POSS nanocomposites give variable thermal and mechanical properties. More importantly, we intend to explore the possibility of incorporating POSS moiety through the Epoxy-POSS into the polyimide network to achieve the polyimide hybrid with lower dielectric constant (low-k) and thermal expansion. The lowest dielectric constant achieved of the POSS/PI material (PI-10P) is 2.65 by incorporating 10 wt% Epoxy-POSS (pure PI, k=3.22). In addition, when contents of the POSS in the hybrids are 0, 3, 10 wt% (PI-0P, PI-3P, PI-10P), and the resultant thermal expansion coefficients (TEC) are 66.23, 63.28, and 58.25 ppm/°C, respectively. The reduction in the dielectric constants and the resultant thermal expansion coefficients of the PI-POSS hybrids can be explained in terms of creating silsesquioxane cores of the POSS and the free volume increase by the presence of the POSS-tethers network resulting in a loose PI structure.     

笼型聚倍半硅氧烷交联聚苯乙烯微球疏水性的研究

采用分散聚合法制备聚苯乙烯微球,以甲基丙烯酸为交联剂、过硫酸铵为引发剂,将聚倍半硅氧烷与聚苯乙烯微球进行交联,并对交联后的聚苯乙烯微球进行红外光谱表征和热重分析。探讨了聚合温度对聚苯乙烯微球粒径的影响,着重分析了影响微球疏水性能的聚乙烯和十二烷基硫酸钠的因素。研究结果表明:聚乙烯对交联微球的浸润接触角以及十二烷基硫酸钠对交联微球的吸湿率影响显著;当w(聚乙烯)=40%(相对聚苯乙烯总质量而言)时,接触角为最大值146°,疏水性能较佳;当w(十二烷基硫酸钠)=1.5%(相对于乳液总质量而言)时,吸湿率较低为7.3%。     

Influence of methacryl polyhedral oligomeric silsesquioxane on the thermal and mechanical properties of methylsilicone resin

A methacryl polyhedral oligomeric silsesquioxane (POSS)‐reinforced methylsilicone resin was prepared in this work. The structures of the obtained products were confirmed with Fourier transform infrared and atomic force microscopy. The influence of methacryl‐POSS on the thermal behavior of the methylsilicone resin was studied by thermogravimetric analysis and isothermal thermogravimetric analysis. The results showed that the thermal stability of the methylsilicone resin was improved, and the degree of thermooxidative degradation was lowered; this was due to the retardation of polymer chain motion and the formation of a protective layer of SiO₂. The interlaminar shear strength and flexural strength of quartz fiber/methylsilicone resin composites were tested to determine the effects of methacryl‐POSS on the mechanical properties of methylsilicone resin. The results revealed that the mechanical properties of the methylsilicone composites also increased obviously after the incorporation of methacryl‐POSS because of the increase in the cure degree and rigidity of the resin. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dielectric properties and solubility of multilayer hyperbranched polyimide/polyhedral oligomeric silsesquioxane nanocomposites

Multilayer hyperbranched polyimide/polyhedral oligomeric silsesquioxane (POSS) nanocomposites were synthesized by the reaction of a bromide‐hyperbranched polyether/POSS and a main‐chain polyimide containing hydroxyl‐functional groups. The first layer was formed through the direct reactions of the main‐chain hydroxyl groups with monochloroisobutyl polyhedral oligomeric silsesquioxane (POSS–Cl). The second and third layers were prepared by the repeated reactions of bromine ether branches that incorporated POSS–Cl with 3,5‐dihydroxybenzyl alcohol. Regardless of the fixed amount of POSS, the higher layers yielded lower dielectric constants. Even when the amount of the POSS loading was reduced 4‐fold, the third layer still had the lowest dielectric constants. The lowest dielectric constant of 2.54 was found in the third layer of the hyperbranched polyimide/POSS nanocomposite because of the large free volume and loose polyimide structures. The densities of the hyperbranched polyimide/POSS nanocomposite corresponded to the dielectric constants. The lower the density was, the higher the free volume was and the lower the dielectric constant was. The experimental results indicated that the hyperbranched polyimide/POSS nanocomposite exhibited increased solubility in comparison with pure polyimide. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of polyimide/polyhedral oligomeric silsesquioxane nanocomposites containing quinolyl moiety

A series of functional polyhedral oligomeric silsesquioxane (POSS)/polyimide (PI) nanocomposites were prepared using a two‐step approach. First, octa(aminophenyl)silsesquioxane (OAPS) was mixed with poly(amic acid) (PAA) prepared by reacting bis(4‐amino‐3,5‐dimethylphenyl)‐3‐quinolylmethane and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride. Second, the resulting solution was subjected to thermal imidization. The well‐defined ‘hard particles’ (POSS) and the strong covalent bonds in the amide linkage between the carbon atom of the carboxyl side group in PAA and the nitrogen atom of the amino group in POSS lead to a significant improvement in the thermal and mechanical properties. Homogeneous dispersion of POSS cages in the PI is evident from scanning electron microscopy, which further confirms that the POSS molecule becomes an integral part of the organic‐inorganic inter‐crosslinked network system. Differential scanning calorimetry and dynamic mechanical analysis show that the glass transition temperatures of the POSS‐containing nanocomposites are higher than that of the corresponding neat PI system, owing to the significant increase of the crosslinking density in the PI/POSS nanocomposites. Increasing the concentration of OAPS in the PI networks decreases the dielectric constant. Pure PI and PI/POSS systems have good antimicrobial activity. Copyright © 2011 Society of Chemical Industry     

Biomass/polyhedral oligomeric silsesquioxane nanocomposites: Advances in preparation strategies and performances

Polyhedral oligomeric silsesquioxane (POSS) as an organic–inorganic hybrid at a molecular level, has excellent mechanical properties, thermodynamic properties, dielectric properties and so on. In recent decades, POSS has been extensively used in modification of various polymers to prepare nanocomposites with enhanced comprehensive performances. Biomass materials such as chitosan, cellulose, silk protein, collagen fibers and gelatin have excellent biocompatibility and biodegradability, which have been widely used in the fields such as biomedical, innovative environmental protection and so on. However, deficiencies including insufficient mechanical properties and rapid rate of biodegradation hampered their application. This paper briefly introduced the principal methods to synthesize POSS nanoparticles, and then focused on technologies for preparing biomass-based composites utilizing diverse functional POSSs. Finally, put forward the prospects of POSS modification technology and its future application direction. This article will have a positive guiding role for the further research and development of biomass/POSS nanocomposites.     

多面体低聚倍半硅氧烷及多面体低聚倍半硅氧烷-聚合物的研究进展

综述了多面体低聚倍半硅氧烷(POSS)的结构、性质与合成方法,重点介绍了单官能团、双官能团、多官能团3类POSS可以通过共聚、缩聚、接枝、共混等多种方式引进聚合物中,形成真正的有机/无机纳米杂化材料,最后指出了POSS的发展方向.     

Epoxy nanocomposites with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

The POSS-containing nanocomposites of epoxy resin were prepared via the co-curing reaction between octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) and the precursors of epoxy resin. The curing reactions were started from the initially homogeneous ternary solution of diglycidyl ether of bisphenol A (DGEBA), 4,4′-Diaminodiphenylmethane (DDM) and OpePOSS. The nanocomposites containing up to 40 wt% of POSS were obtained. The homogeneous dispersion of POSS cages in the epoxy matrices was evidenced by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM) and atomic force microscopy (AFM). Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) showed that at the lower POSS concentrations (<30 wt%) the glass transition temperatures (T_gs) of the nanocomposites almost remained invariant whereas the nanocomposites containing POSS more than 40 wt% displayed the lower T_gs than the control epoxy. The DMA results show that the moduli of the nanocomposites in glass and rubbery states are significantly higher than those of the control epoxy, indicating the nanoreinforcement effect of POSS cages. Thermogravimetric analysis (TGA) indicates that the thermal stability of the polymer matrix was not sacrificed by introducing a small amount of POSS, whereas the properties of oxidation resistance of the materials were significantly enhanced. The improved thermal stability could be ascribed to the nanoscaled dispersion of POSS cages and the formation of tether structure of POSS cages with epoxy matrix.     

笼型倍半硅氧烷改性UPR的固化性能与热性能

采用示差扫描量热仪(DSC),热重分析仪(TGA)及动态力学分析仪(DMA)研究了甲基丙烯酰氧丙基笼型倍半硅氧烷(MAP-POSS)与一缩二乙二醇型UPR、苯乙烯的等温共固化反应及动力学,测试了固化物的热性能和动态力学性能。结果表明,固化过程符合自催化反应机理,当体系中MAP-POSS质量分数为5%时,5%热失重温度和残留量5%时的温度较未加体系分别提高7℃和31℃,玻璃化转变温度降低4.2℃,热降解动力学符合1级反应。     

Curing dynamics and network formation of cyanate ester resin/polyhedral oligomeric silsesquioxane nanocomposites

Curing dynamics and network formation of cyanate ester resin (PT-30)/TriSilanolPhenyl polyhedral oligomeric silsesquioxane (POSS) nanocomposites were studied by means of differential scanning calorimetry (DSC), modulated temperature differential scanning calorimetry MTDSC), Fourier transform infrared (FTIR) and Raman spectroscopies. The incorporation of the POSS showed a strong catalytic effect (decrease in curing temperature and activation energy) on the curing reaction of PT-30. The activation energy of the PT-30 decreased with increasing POSS content. The most effective catalytic effect was observed at 5 wt% of the POSS. Both FTIR and Raman spectra monitored the formation of triazine (i.e. cyanurate) ring in the PT-30 and its nanocomposites with the POSS. Raman spectra revealed that the PT-30 resin preferentially reacted with -OH group in the POSS firstly to form a -O-(CNH)-O- bond, rather than react with itself to form the triazine rings, during the network formation of the PT-30/POSS nanocomposites. The strong catalytic effect of the POSS on the curing process of the PT-30 appears to be due to the formation of this -O-(CNH)-O- bond.     

Epoxy nanocomposites containing mercaptopropyl polyhedral oligomeric silsesquioxane: Morphology,thermal properties,and toughening mechanism

A novel polyhedral oligomeric silsesquioxane (POSS) containing a mercaptopropyl group [mercaptopropyl polyhedral oligomeric silsesquioxane (MPOSS)] was synthesized via the hydrolytic condensation of γ-mercaptopropyl triethoxysilane in an ethanol solution catalyzed by concentrated hydrochloric acid and was used to modify epoxy–amine networks by a cocuring reaction with diglycidyl ether of bisphenol A (DGEBA). The structure, morphology, and thermal and mechanical properties of these MPOSS/DGEBA epoxy nanocomposites were studied and investigated with thermogravimetric analysis/differential thermal analysis (TGA–DTA), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). From SEM analysis, we observed that the miscibility between epoxy and POSS occurred at a relatively high POSS content, which characterized this mixture as a polymer nanocomposite system. The impact test showed that MPOSS reinforced the epoxy effectively, and the SEM study of the impact fracture surface showed that the fibrous yielding phenomenon observed was an indication of the transition of the brittle stage to a ductile stage and correlated well with the large increases in the impact strength; this was in agreement with the in situ reinforcing and toughening mechanism. The TGA–DTA analysis indicated that the MPOSS/DGEBA epoxy hybrids exhibited lower thermostability at a lower temperature but higher thermostability and higher efficiency in char formation at an elevated temperature. Differential scanning calorimetry showed that the glass transition temperature (T_g) of the MPOSS/epoxy hybrids were lower than that of the neat epoxy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of nanocomposites based on polylactides tethered with polyhedral oligomeric silsesquioxane

A series of polylactides tethered with polyhedral oligomeric silsesquioxane (POSS–PLAs) were synthesized via the ring‐opening polymerization of L ‐lactide with 3‐hydroxypropylheptaisobutyl polyhedral oligomeric silsesquioxane (3‐hydroxypropylheptaisobutyl POSS) at a concentration of 0.02–2.00 mol % in the presence of a stannous(II) octoate catalyst. 1 H‐NMR spectra and a composition analysis of the POSS–PLA hybrids confirmed that 3‐hydroxypropylheptaisobutyl POSS served as an initiator for L ‐lactide in the ring‐opening polymerization. X‐ray diffraction patterns evidenced that polyhedral oligomeric silsesquioxane (POSS) molecules of POSS–PLA hybrids were well dispersed without the formation of their crystalline aggregates. The POSS–PLA hybrid with 0.50 mol % POSS content was solution‐blended with a neat polylactide (PLA) homopolymer to obtain PLA/POSS–PLA nanocomposites with various POSS–PLA contents of 1–30 wt %. The X‐ray diffraction results of the PLA/POSS–PLA nanocomposites demonstrated that the POSS–PLA was well dispersed in the neat PLA matrix. The thermal and thermooxidative degradation properties of the nanocomposites were found to be improved at POSS–PLA contents of 1–20 wt %, compared to the neat PLA. The crystallization rates and crystallinities of the PLA/POSS–PLA nanocomposites were faster and higher, respectively, with increasing POSS–PLA content because of the nucleation effect of the POSS molecules in the neat PLA matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of side chain architecture on dielectric relaxation in polyhedral oligomeric silsesquioxane/polypropylene oxide nanocomposites

Segmental and normal mode dynamics in polyhedral oligomeric silsesquioxane (POSS)/poly(propylene oxide) (PPO) non-reactive and reactive nanocomposites were investigated using a broadband dielectric relaxation spectroscopy (DRS) over wide ranges of frequency and temperature. Three POSS reagents with varying side chain architecture were selected for the study: OctaGlycidyldimethylsilyl (OG), TrisGlycidylEthyl (TG) and MonoGlycidylEthyl (MG). Spectra of OG and TG show a segmental (α) process at lower frequency and a local (β) relaxation at higher frequency, while MG displays only a local relaxation. Neat PPO has both segmental and normal mode (α_N) process. In POSS/PPO non-reactive nanocomposites, the presence of OG and TG causes a decrease in the time scale of α_N and α relaxation, while MG has no impact on the dynamics of PPO. Chemical reactions in POSS/PPO reactive nanocomposites lead to the formation of nanonetworks. Prior to the onset of reaction, POSS nanoparticles promote the motions of PPO chains, decrease the time scale of relaxation and give rise to thermodielectrically simple spectra. During the reaction, however, the network formation leads to spectral broadening and a gradual increase in the time scale of both segmental (α) and normal mode (α_N) relaxation. A detailed account of the effects of structure, concentration and dispersion of POSS in the matrix, molecular weight of PPO, extent of reaction and temperature on the molecular origin, temperature dependence and spectral characteristics of relaxation processes in POSS/PPO nanocomposites is provided.     

笼状硅氧烷低聚物/聚合物复合材料的研究进展

介绍了笼状硅氧烷低聚物（POSS）的概念、分类及其合成工艺,综述了POSS／聚合物复合材料的制备方法及其在提高聚合物在热稳定性、阻燃性能、医学性能、光电性能、形状记忆及表面性能等方面的应用。