Isolation,composition, morphological and pasting properties of starches from rice cultivars grown in Nigeria

The isolation, composition, morphology and pasting properties of rice starches from different rice cultivars (N2R, Nerica II rice; IGR, Igbemo rice; ILR, Ilaje rice; and EAR, Efon Alaye rice) were studied. The starches were isolated from their flours by using a modified deproteination method in 0.1% NaOH. The highest starch yield of 65% was obtained from EAR with a residual protein of 0.41% and lowest starch yield of 45.70% from IGR with a residual protein of 0.42%. The AAM concentration of rice starches ranged from 21.88 to 26.04%. The sizes of the starch granules obtained from SEM were between 3 and 8 µm, some of the granules were individual (single) while others were fused (compound granules). The starch granules were small, polygonal and irregular in shape. The pasting parameters were evaluated using rapid visco analyser (RVA). Significant differences were observed in individual pasting parameters such as peak viscosity (PV), breakdown viscosity (BV), final viscosity (FV) and setback viscosity (SV). Cooked ILR starch had the highest PV (279.69 RVU; rapid viscosity units) and BV (52.50 RVU) when compared to the other starches. In contrast, N2R showed the highest FV (329.92 RVU) and SV (102.50 RVU), the latter due to the high concentration of AAM. The results revealed that cultivar has an effect on composition and pasting properties of rice starch.     

Physicochemical,Thermal, Morphological and Pasting Properties of Starches from some Indian Black Gram (Phaseolus mungo L.) Cultivars

The starches separated from thirteen different black gram cultivars were investigated for physicochemical, thermal, morphological and pasting properties. Amylose content, swelling power, solubility and water binding capacity of starches ranged between 30.2–34.6%, 16.0–22.3 g/g, 14.8–17.3% and 73.5–84.5%, respectively. The diameter of starch granules, measured using a laser‐light scattering particle‐size analyzer, varied from 12.8 to 14.3 μm in all black gram starches. The shape of starch granules varied from oval to elliptical. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) determined using differential scanning calorimetry, ranged between 66.1–71.3, 71.0–76.2, 75.9–80.4°C and 6.7–9.4 J/g, respectively. Pasting properties of starches measured using the Rapid Visco Analyser (RVA) also differed significantly. Pasting temperature, peak viscosity, trough, breakdown, final viscosity and setback were between 75.8–80.3°C, 422–514, 180–311, 134–212, 400–439 and 102–151 Rapid Visco Units (RVU), respectively. Turbidity values of gelatinized starch pastes increased during refrigerated storage. The relationships between different properties were also determined using Pearson correlation coefficients. Amylose content showed a positive correlation with swelling power, turbidity and granule diameter. Swelling power showed a negative correlation with solubility and setback. T_o, T_p and T_c showed positive correlation with turbidity, pasting temperature and were negatively correlated to peak and breakdown viscosity.     

In vitro digestibility,pasting, and structural properties of starches from different cereals

Starches isolated from seven different cereals were evaluated for their composition, physicochemical, in vitro digestibility, structural, morphological, and pasting properties. The in vitro starch digestion rate and estimated glycemic index (GI) of cereal starches were evaluated along with the impact of cooking on starch digestion. The cooking of starch slurries increased the rapidly digestible starch content from a range of 34.7–54.4% to a range of 60.5–78.5%. On the basis of hydrolysis index, the GI ranged from 83.6 to 91.8 and after cooking it increased from 95.1 to 98.6 for different cereal starches. Both the swelling power and solubility showed an increasing trend with rising temperature. Paste clarity of starches negatively correlated with fat content. The amylose content of various starches ranged from 17.7 to 24.7% and was negatively correlated to crystalline index (r = -0.975, p ≤ 0.05). XRD pattern revealed A-type pattern of crystalline starch, where crystallinity index ranging between 28.2 to 44.9%. FTIR revealed slight differences among chemical bonding of starches from different cereals. From scanning electron micrograph observations, wheat and barley starch granules proved smoother as compared to other cereal granules. Barley contained the highest (27.5 µm) and rice had the lowest (10.2 µm) size starch granules. The pasting properties were significantly (p ≤ 0.05) different for different cereal starches. Peak, breakdown, and final viscosities were the highest for maize starch (1725, 384, and 2112 mPa.s, respectively), whereas rice and oats exhibited the highest trough and setback viscosities (1420 and 954 mPa.s, respectively).     

Isolation and characterization of Mexican jackfruit (Artocarpus heterophyllus L) seeds starch in two mature stages

Starch was isolated from jackfruit (Artocarpus heterophyllus L) seeds grown in México at different stages of fruit maturity and ripeness. Seeds represent about 8–15% from the fruit that can weigh around 2–36 kg. Proximate composition of seeds showed a high protein content (ca. 22%). Starch yield was 14% with a purity of 81% in both ripeness stages and AM content was lower (12.27%) than other non‐common starch sources. The starch granules in physiological mature (PM) and consumption ripeness (CR) jackfruit showed birefringence with diverse shapes such as semi‐oval or bell shapes. The size of starch granules for PM ranged between 3 and 9.5 µm and for CR between 3 and 12 µm. A‐type XRD pattern was similar to cereal starches. PM starch had higher peak viscosity than CR, but CR did not show breakdown; both starches presented setback during cooling. Thermal properties of gelatinization and retrogradation in PM and CR starches were similar. Characterization performed on this non‐common starch showed that it could be an alternative to use in food systems.     

Study on physicochemical characteristics of waxy potato starch in comparison with other waxy starches

The physicochemical properties of wx potato, wx corn, and wx rice starches were examined and compared. wx potato starch displayed the B‐type XRD pattern, whereas wx rice and wx corn displayed the A‐type. Shapes of wx potato starch were oval or slightly round, wx corn and wx rice starch granules were polygonal. AM contents of the three starches were between 1.0 and 1.5%. Rapid viscosity analyzer data showed initial pasting temperatures of wx potato, wx corn, and wx rice starches as 69.6, 75.4, and 76.8°C, respectively, peak viscosity, breakdown, and setback of wx potato starch were 2114, 1084, and 4 mPa s. Using DSC, onset temperature of gelatinization of wx potato starch was 5.5–7.2°C higher than those of wx rice and wx corn starches. The thermal enthalpies of the starches studied in our laboratory were in the range of 0.2268–1.9900 J/g with decreasing order of wx potato > wx corn > wx rice starch.     

Pasting Properties of Potato Starch and Waxy Maize Starch Mixtures

The pasting viscosity, morphological properties, and swelling properties of potato starch and waxy maize starch mixtures at different ratios were investigated. Pasting analysis of the starch mixtures (7% solids in water, w/w) using a Rapid Visco Analyser showed linear changes in peak viscosity and pasting temperature according to the mixing ratios of both starches, but not in breakdown and setback. The pasting profile revealed that the starches rendered mutual effects during pasting, more significantly when the amounts of potato and waxy maize starches were similar. The volume fraction of swollen granules and the presence of amylose appeared to be important parameters in the mutual effects of both starched during pasting. Under a light microscope, the swelling of potato starch granules was delayed by the presence of waxy maize starch. Overall results indicate that new pasting properties can be generated by mixing starches of different botanical sources.     

Effect of deproteinization on degree of oxidation of ozonated starch

Effects of deproteinization on the degree of oxidation of ozonated starch (corn, sago, and tapioca) were investigated. Starch in dry powder form was exposed to ozone for 10 min at different ozone generation times (OGTs: 1, 3, 5, 10 min), and then native starches (NS) and deproteinized starches (DPS) were analyzed for protein content. Deproteinization caused a significant reduction in protein content for corn (∼21%) and sago (∼16%) starches relative to NS. Carbonyl and carboxyl contents increased significantly in all ozonated deproteinized starches (ODPS) with increasing OGT. Carbonyl and carboxyl contents of ODPS ranged from 0.03 to 0.13% and 0.14 to 0.28%, respectively. The carboxyl content for all ODPS was significantly higher than that of ozonated native starches (ONS). A Rapid Visco Analyser was used to analyze pasting properties of all starches. Deproteinization increased the pasting viscosities of corn and sago starches compared to their native forms. Generally, pasting viscosity of all ODPS decreased drastically as OGT increased. At the highest oxidation level (10 min OGT), all ODPS exhibited the lowest pasting viscosities compared to their ozonated native form, except for peak viscosity, breakdown viscosity, and setback viscosity for ozonated deproteinized corn starch. In conclusion, deproteinization as a pretreatment prior to starch ozonation successfully increased the degree of oxidation in the three types of starch studied. However, the extent of starch oxidation varied among the different starches, possibly due to differences in rates of degradation on amorphous and crystalline lamellae and in rates of oxidation of carbonyl and carboxyl groups.     

Influence of molecular structural characteristics on pasting and thermal properties of acid-methanol-treated rice starches

Rice starches from TKW1, TNG67 and TCS17 varieties, differing widely in amylose contents (0.1, 18.3 and 29.2%) were treated at 45 °C for 1 h in methanol containing various amounts of HCl. The recovery, pasting properties, thermal behaviors, molecular size and chain length distribution of starch were observed. Starches exhibited widely different pasting and thermal behavior upon acid-methanol treated (AMT). Degradation of starches upon AMT affected the leaching extent and chain length of amylose. No obvious changes were found on chain length and content of chain fractions of amylopectin. The pasting viscosity of rice starch decreased with increasing concentration of HCl, and the pasting profiles depended on the variety of rice. The pasting profile of AMT-TNG67 starch showed a two-step increasing pattern during heating, while TKW1 and TCS17 starches showed smoothly increasing pasting curves. The relationship between pasting patterns of AMT-TNG67 starches with amylose leaching and two stages of swelling behavior of starch granules was investigated. Results indicated that the pasting of starch granules depend on the amount, as well as the chain length, of amylose in granules.     

Physicochemical Properties of Sweet Potato Flour and Starch as Affected by Blanching and Processing

The effects of blanching on physicochemical properties of flours and starches prepared from two varieties of sweet potatoes (Mun‐Kai and Negro) were studied and compared. The pasting temperature and peak viscosity of starches, respectively, were 74 and 80 °C and 381 and 433 RVU. The pasting temperature (74.0‐94.8 °C) of flours was greater than that of starch, depending on the variety and blanching process. However, the peak viscosity (ca. 103‐120 RVU) of flours was lower than that of the corresponding starches. Partial gelatinization of starch granules was observed as a result of a 1‐min blanching. Composition of starch and flour was found to affect swelling power and solubility. The starch content of starches, flours from unblanched sweet potato and flours from 1‐min blanched sweet potatoes were 97; 66.3 and 74.9; as well as 36.6 and 40.4%, respectively. Amylose content of flours and starches varied from 17.2‐20.8%.     

Physicochemical, pasting and thermal properties of tuber starches as modified by guar gum and locust bean gum

This study was carried out in order to compare the functional characteristics of isolated starch from five tuber crops, yam, taro, sweet potato, yam bean and potato, as well as effect of guar gum (GG) and locust bean gum (LBG) on pasting and thermal properties of tuber starches. The results showed that total amylose content of five tested starches ranged from 17.85% to 30.36%. The results of pasting behaviour showed that potato starches exhibited the highest peak viscosity and yam starch presented a stable curve with little breakdown viscosity. Addition of GG and LBG resulted in a significant increase in peak, final viscosity, breakdown and setback viscosity for all tuber starches ( P  < 0.05), but a slight decrease in pasting temperature. The gelatinisation enthalpy (Δ H ) for starches with GG and LBG was slightly lower than those of the starches alone in yam and sweet potato, but not in taro and yam bean.     

Physicochemical, crystallinity, pasting and morphological properties of bean starch oxidised by different concentrations of sodium hypochlorite

The effect of bean starch oxidation at different active chlorine concentrations (0.5%, 1.0% and 1.5%) on the physicochemical, crystallinity, pasting and morphological properties of starch was investigated. The carbonyl content, carboxyl content, starch colour, swelling power, solubility, gel hardness, X-ray crystallinity, pasting properties, gelatinisation characteristics and morphology of the starches were evaluated. The bean starch oxidised with 0.5% active chlorine had the characteristic of a slightly crosslinked starch. As compared to the native and 0.5% active chlorine-oxidised starches, active chlorine at 1.0% and 1.5% increased the carbonyl content, carboxyl content and solubility of the starches. Moreover, these concentrations of active chlorine decreased the swelling power, gel hardness, relative crystallinity, breakdown, peak viscosity and setback, as compared to the native and 0.5% active chlorine-oxidised starches. The starch granules oxidised with 1.5% active chlorine had imperfections in their structure, and its surface appears to be rougher than the other granules.     

Acid-Modified Wheat Flours. Pasting and Dispersion Properties

Acid-modified (AM) and hydroxyethylated acid-modified (HEAM) wheat flours were prepared with viscosities suitable for use as tub-sizing agents and as coating adhesives for paper. The pasting characteristics and dispersion properties of both these flours were compared with those of commercial products now used in such applications. Effects were determined of time, temperature and solids concentration on pasting characteristics, paste viscosity and dispersion properties. Paste viscosity behavior of the modified flours, prepared under dry-state reaction conditions, was more like that of hypochlorite-oxidized (HO) starch than either AM or HEAM starches. Dispersibility of the modified flours was comparable to that of AM starch, but it was somewhat lower than dispersibility of HEAM and HO starches. Pastes of modified flours and starches, stored and periodically tested, varied little in dispersibility values for flour dispersions, whereas progressively less dispersible material was found in starch pastes.     

Physicochemical,morphological, and thermal properties of starches separated from bulbs of four Chinese lily cultivars

The starches separated from bulbs of four different lily cultivars (Lanzhou, Pinglu, Yixing‐1, and Yixing‐2) were investigated for physicochemical, morphological, crystalline, and thermal properties. AM content of lily bulbs starches from different cultivars ranged from 19.46 to 25.17%. The swelling power of starches ranged between 14.4 and 21.3 g/g, and the solubility ranged from 8.92 and 16.6% at the temperature of 85°C. Four cultivars of lily starches paste had excellent transparency and the transmittance value of Lanzhou lily as high as 54.7%. The transmittance of the gelatinized aqueous starch suspensions, from all lily cultivars, decreased with increase in storage period. The shape of starch granules varied from triangular to cylindrical and XRD of four lily starches all showed B‐type pattern. The transition temperatures and enthalpy of gelatinization (ΔH_gel) were determined using DSC. T_p varied from 62.52 to 65.25°C. Pinglu lily starch showed the highest ΔH_gel and gelatinization range (T_c–T_o) index among starches from four different lily cultivars.     

Starch of diverse Mexican rice cultivars: physicochemical,structural, and nutritional features

Structure‐function relationship of rice starch is scarce in the literature. Starch was isolated from diverse Mexican rice varieties and their swelling power (SP), soluble solids (ss), thermal and pasting properties, XRD pattern, in vitro starch digestibility, and AP chain‐length distribution were evaluated. Rice starches with low SP at 60°C had higher temperature and enthalpy of gelatinization. The peak viscosity of rice starches ranged between 2426 and 3519 cP, and the samples presented high values for setback due to the AM content. Rice starches presented the typical A‐type XRD pattern with crystallinity values between 32.7 and 36.3%. Rice starches presented high amounts of short chains (A and B1), and differences were found among the cultivars. AM content for rice starches ranged between 18.4 and 22.9%, and the main fraction recorded by HPSEC was the Fraction III (short chains) with values around 60%. The uncooked rice starch samples presented high values of slowly digestible starch (SDS) and rapidly digestible starch (RDS), and differences were found among the cultivars. In cooked samples decreased SDS and increased RDS and RS. Onset temperature and enthalpy of gelatinization were correlated with the percentage of A‐chains and an opposite pattern was found with the percentage of B1 chains. AP structural characteristics affect the functional, physicochemical, and digestibility properties of rice starches.     

Properties of Starch Separated From Ten Mung Bean Varieties and Seeds Processing Characteristics

Starch samples from ten mung bean cultivars grown in china were isolated, and their morphology, physicochemical, thermal, and pasting properties were evaluated. The objectives of the study were to investigate the starch properties and processing characteristics of different mung bean varieties, and to establish the basic foundation of improving the functionality of mung beans and their starch grown in the region. The mung bean starches showed the kidney-shaped, elliptical, small spherical and dome-shaped granules, and the starches granule size varied between 5 and 40 μm. Total starch content, amylose content, solubility, and swelling power ranged from 54.73% to 57.99%, 40.44% to 41.82%, 13.72% to 17.67%, and 17.27% to 20.55%, respectively. The pasting properties were determined using a rapid visco analyzer, and various mung bean starches exhibited different pasting profiles. Different starches differed in transition temperatures (T _o, T _p, and T _c), gelatinization temperature range (ΔT _r), and enthalpy of gelatinization (ΔH) according to differential scanning calorimeter analysis. Hydration coefficient, degree of gelatinization, and hardness of mung bean varieties ranged from 51.97% to 84.46%, 62.99% to 95.11%, and 26.07 N to 112.11 N, respectively. This study indicated that starches separated from different mung bean cultivars possess different physicochemical characteristics, and various mung beans cultivars showed diverse processing properties.     

Physicochemical and Gelatinization Properties of Starches Separated from Various Rice Cultivars

Morphological, viscoelastic, hydration, pasting, and thermal properties of starches separated from 10 different rice cultivars were investigated. Upon gelatinization, the G′ values of the rice starch pastes ranged from 37.4 to 2057 Pa at 25 °C, and remarkably, the magnitude depended on the starch varieties. The rheological behavior during gelatinization upon heating brought out differences in onset in G′ and degree of steepness. The cultivar with high amylose content (Goami) showed the lowest critical strain (γ_c), whereas the cultivars with low amylose content (Boseokchal and Shinseonchal) possessed the highest γ_c. The amylose content in rice starches affected their pasting properties; the sample possessing the highest amylose content showed the highest final viscosity and setback value, whereas waxy starch samples displayed low final viscosity and setback value. The onset gelatinization temperatures of the starches from 10 rice cultivars ranged between 57.9 and 64.4 °C. The amylose content was fairly correlated to hydration and pasting properties of rice starches but did not correlate well with viscoelastic and thermal characteristics. The combined analysis of hydration, pasting, viscoelastic, and thermal data of the rice starches is useful in fully understanding their behavior and in addressing the processability for food applications.     

Physico‐chemical properties of starches from Indian kidney bean (Phaseolus vulgaris) cultivars

Starches isolated from four Kidney bean cultivars (French Yellow, Contender, Master Bean, Local Red) grown in temperate climate were studied for their physico‐chemical, morphological, thermal, pasting, textural and retrogradation properties. Physico‐chemical properties such as composition, amylose content, water absorption capacity, swelling power, syneresis, freeze–thaw stability and light transmittance showed significant differences among starches. Amylose content (36.4–41.7%) showed strong correlations with peak, trough, breakdown, final and setback viscosity, gel hardness, gumminess and chewiness. The starch granule morphology of these starches showed considerable variation when studied by scanning electron microscopy. Starch granules were observed to be round, irregular or elliptical with smooth surfaces. Master Bean starch granules were larger than those of other kidney bean starches. Pasting and textural properties of French Yellow starches were found to be higher than other kidney bean starches. Local Red starches showed the highest gelatinisation transition temperatures, whereas Master Bean starches showed the lowest transition temperatures.     

Microstructural and physicochemical properties of heat-moisture treated waxy and normal starches

Starches from normal rice (21.72% amylose), waxy rice (1.64% amylose), normal corn (25.19% amylose), waxy corn (2.06% amylose), normal potato (28.97% amylose) and waxy potato (3.92% amylose) were heat-treated at 100 °C for 16 h at a moisture content of 25%. The effect of heat-moisture treatment (HMT) on morphology, structure, and physicochemical properties of those starches was investigated. The HMT did not change the size, shape, and surface characteristics of corn and potato starch granules, while surface change/partial gelatinization was found on the granules of rice starches. The X-ray diffraction pattern of normal and waxy potato starches was shifted from B- to C-type by HMT. The crystallinity of the starch samples, except waxy potato starch decreased on HMT. The viscosity profiles changed significantly with HMT. The treated starches, except the waxy potato starch, had higher pasting temperature and lower viscosity. The differences in viscosity values before and after HMT were more pronounced in normal starches than in waxy starches, whereas changes in the pasting temperature showed the reverse (waxy > normal). Shifts of the gelatinization temperature to higher values and gelatinization enthalpy to lower values as well as biphasic endotherms were found in treated starches. HMT increased enzyme digestibility of treated starches (except waxy corn starch); i.e., rapidly and slowly digestible starches increased, but resistant starch decreased. Although there was no absolute consistency on the data obtained from the three pairs of waxy and normal starches, in most cases the effects of HMT on normal starches were more pronounced than the corresponding waxy starches.     

Composition,molecular structure,and physicochemical properties of starches from four field pea (Pisum sativum L.) cultivars

Starch from four cultivars (Carneval, Carrera, Grande and Keoma) of field pea (Pisum sativum L.) was isolated and its physicochemical properties were compared with those of other legume starches. The yield of starch was in the range 32.7–33.5% on a whole seed basis. The starch granules were round to elliptical with smooth surfaces. The free lipid was 0.05% in all starches. However, bound and total lipids ranged from 0.24 to 0.29% and from 0.28 to 0.34%, respectively. The total amylose content ranged from 48.8–49.6%, of which 10.9–12.3% was complexed by native lipid. The degree of polymerization (DP) of amyloses ranged from 1300 to 1350. The chain length distributions of debranched amylopectins of the starches were analyzed using high performance anion-exchange chromatography equipped with a post-column amyloglucosidase reactor and a pulsed amperometric detector. The proportion of short branch chains, of chain length DP 6-12, ranged from 16.2 to 18.6%. Keoma displayed a larger portion (19.4%) of long branch chains (DP>37) than the other three starches (16.2–16.9%). The average amylopectin branch chain length ranged from 22.9 to 24.2. The maximum detectable DP was higher in Keoma (71) than in the other three starches (64–65). The X-ray pattern was of the ‘C’ type. The relative crystallinity was in the range 20.8–25.1%. The proportion of ‘B’ polymorphic form was higher in Keoma (25.6%) than in the other three starches (22.1–24.1%). There were no significant differences in swelling factor. The extent of amylose leaching at 95°C ranged from 25.20 to 26.85. All four starches exhibited nearly identical gelatinization transition temperatures and enthalpies. However, the gelatinization temperature range (T_c–T_o) followed the order: Grande∼Keoma>Carneval∼Carrera. The four starches showed identical pasting temperatures and exhibited only marginal differences with respect to 95°C viscosity and to the increase in consistency during the holding period at 95°C. However, the set-back viscosity for Carneval was lower than that of the other starches. There were no significant differences in the extent of acid hydrolysis. However, susceptibility towards hydrolysis by α-amylase followed the order: Carneval∼Carrera∼Grande>Keoma. The extent of retrogradation (monitored by changes in enthalpy) during storage at 40°C/24 h followed the order: Carneval>Carrera>Grande>Keoma. However, differences in the extent of retrogradation among starches were not discernable by freeze-thaw stability measurements.     

Influence of prior acid treatment on physicochemical and structural properties of acetylated sorghum starch

Influence of prior acid treatment on acetylation of starch isolated from an Indian sorghum cultivar was investigated. The starch was acid thinned (AT) using 0.1, 0.5, and 1 M HCl for 1.5 h and then acetylated (Ac) with acetic anhydride (8% w/w). The acid thinning and subsequent acetylation appeared to reduce the percentage acetylation as indicated by degree of substitution. Ac‐AT starches exhibited significantly different physicochemical, thermal, pasting, and gel textural properties from those of AT and Ac starches. Starches after dual modification showed higher solubility, lower AM content, gelatinization temperatures, retrogradation, peak viscosity, and gel hardness than native starch. Enthalpy and range of gelatinization were observed to be higher in dual modified starches than native starch. However, no significant changes in granule morphology or crystalline pattern of Ac‐AT starches were observed compared with native starch.