Studies on the physicochemical,morphological, thermal and crystalline properties of starches separated from different Dioscorea opposita cultivars

The physicochemical, morphological, thermal and crystal properties of the starches separated from four different Dioscorea opposita Thunb. cultivars (Taigu, Ribenbai, Wenxi and Zhongbowen) were studied. Amylose contents of D. opposita Thunb. starches from different cultivars ranged from 21.17% to 25.00%. The shape of starch granules separated from different D. opposita Thunb. cultivars varied from round or oval to elliptic or caky. The surface of the starch granules appeared to be smooth without any fissures. The average particle diameter of starches from different D. opposita Thunb. cultivars ranged from 25.90 to 28.06 μm. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) were determined using differential scanning calorimetry (DSC). T_o, T_p, T_c and ΔH_gel of D. opposita Thunb. starches ranged from 73.1 to 73.9, 77.6 to 80.4, 82.1 to 85.9 °C and 6.548 to 12.13 J/g, respectively. The crystal type of starches separated from different D. opposita Thunb. cultivars was a typical C-type pattern. The relative degree of crystallinity of the four D. opposita Thunb. cultivars starches were about 38.79%, 39.88%, 41.67% and 49.03%, respectively.     

Fine Structure,Thermal and Viscoelastic Properties of Starches Separated from Indica Rice Cultivars

Starches were separated from indica rice cultivars (PR‐113, Basmati‐370, Basmati‐386, PR‐115, IR‐64, and PR‐103) and evaluated using gel permeation chromatography (GPC), X‐ray diffraction, differential scanning calorimetry (DSC) and dynamic viscoelasticity . Debranching of starch with isoamylase and subsequent fractionation by GPC revealed 9.7–28.3% apparent amylose content, 3.7–5.0% intermediate fraction (mixture of short amylose and long side‐chains of amylopectin), 20.6–26.6% long side‐chains of amylopectin and 45.8–59.4% short side‐chains of amylopectin). IR‐64 starch with the highest crystallinity had the highest gelatinization temperatures and enthalpy, T_o, T_p, T_c, and ΔH_gel being 71.8, 75.9, 82.4°C and 5.1 J/g, respectively, whereas PR‐113 starch with lower crystallinity showed the lowest gelatinization temperatures (T_o, T_p, T_c, of 60.8, 65.7 and 72.2°C, respectively). Basmati‐386 starch exhibited two endotherms during heating, the first and second endotherm being associated with the melting of crystallites and amylose‐lipid complexes, respectively. T_o, T_p, T_c and ΔH_gel of the second endotherm of Basmati‐386 starch were 99.0, 100.1, 101.1°C and 2.0 J/g, respectively. During cooling, Basmati‐386 also showed an exotherm at a peak temperature of 87°C. PR‐113 starch with the highest amylose content and the lowest content of short side‐chains of amylopectin had the highest peak storage modulus (G′= 1.6×10⁴ Pa). The granules of PR‐113 starch were the least disintegrated after heating. The effects of heating starch suspensions at different temperatures (92°C, 130°C and 170°C) on intrinsic viscosity [η], transmittance and viscoelasticity were also studied to evaluate the extent of breakdown of the molecular structure. The intrinsic viscosity of starch suspensions heated at 92, 130 and 170°C ranged between 103–114, 96–110 and 28–93 mL/g. Transmittance value of starches cooked at 92°C decreased with increase in storage duration. All starches except PR103, cooked at 130°C also showed decrease in transmittance during storage, however, at lower rate. PR103 starch heated at 130°C did not show any change in transmittance up to a storage time of 48 h. The changes in viscoelasticity of starch pastes cooked at different temperatures during cooling and reheating were also evaluated. G′ and G′′ increased with decrease in temperature during cooling cycle. Starches heated at 130°C with apparent amylose content ≤ 21.2% showed an improvement in G′ and G′′ in comparison to the corresponding starches heated at 92°C, this improvement was observed to be higher in starches with lower amylose content. All starches heated at 170°C had a higher proportion of breakdown in molecular structure as indicated by lower G′ and G′′ than the same starches heated at 130 and 92°C.     

Characterization of new starches separated from different Chinese yam (Dioscorea opposita Thunb.) cultivars

The starches separated from four different Dioscorea opposita Thunb. cultivars were investigated for morphological, thermal, crystal, and physicochemical properties, such as amylose content, swelling power, solubility and water-binding capacity properties. Amylose content of D. oppositastarches from different cultivars ranged from 20.74% to 25.94%. The shape of starch granules separated from different D. opposita Thunb. cultivars varied from round to oval or elliptic. The mean particle diameter of starches ranged from 23.39 to 26.87 μm. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) were determined using differential scanning calorimetry (DSC). T_o, T_p and T_c varied from 73.6 to 74.8, 78.8 to 81.0, and 83.3 to 87.2 °C, respectively. D. opposita cv. Jinchengerhao starch showed the highest ΔH_gel values (12.48 J/g) while D. opposita cv. Baiyu starch showed the lowest values (8.413 J/g). The crystal type of starches separated from different D. opposita cultivars was a typical C_B-type pattern. The degrees of crystallinity of the four D. opposita cultivars starches were about 50.52%, 32.99%, 33.57% and 36.16%, respectively.     

Physicochemical,crystalline, and thermal properties of native and enzyme hydrolyzed Pueraria lobata (Willd.) Ohwi and Pueraria thomsonii Benth. starches

Starches isolated from the bulbs of Pueraria lobata (Willd.) Ohwi (PLO) and Pueraria thomsonii Benth. (PTB) were hydrolysed by glucoamylase for different lengths of time (2, 4, 8, 12, and 24 h). The hydrolysis results were compared by scanning electron microscope (SEM), X‐ray power diffractometer (XRD), and differential scanning calorimetry (DSC). The SEM results revealed that both of the PLO and PTB starches showed the same hydrolysis mechanism, which indicated that the glucoamylase primarily attacking the exterior of starch granules and then the interior. The results of XRD revealed the crystalline type of PTB starch changed from C‐type to A‐type with crystallinity reducing from 43.5 to 20.9% during the hydrolysis. Unlike PTB starch, the PLO starch did not show marked changes in crystalline style but lower degree of crystallinity was obtained from 32.4 to 13.7% during the hydrolysis. All the XRD results demonstrated that B‐type polymorph was preferentially degraded than A‐type polymorph in the C‐type starch. The DSC results revealed that both of the PLO and PTB starches showed decreased enthalpy of gelatinization (ΔH_gel) and gelatinization temperature range (R)‐value after hydrolysis, while the gelatinization temperature (T_p) indicated different tendency, initially ranging from 68.6 to 64.3°C and then increasing to 67.8°C for PLO starch. While for PTB starch, the T_p‐value showed progressive reduction from 85.4 to 74.3°C during the whole process.     

Physicochemical,morphological, thermal and rheological properties of starches separated from kernels of some Indian mango cultivars (Mangifera indica L.)

The starches separated from kernels of five different Indian mango cultivars (Chausa, Totapuri, Kuppi, Langra and Dashehari) were investigated for physicochemical, morphological, thermal and rheological properties. Mean granule length and width of the starches separated from mango cultivars ranged between 15.8–21.7 and 8.7–14.1 μm, respectively. The shape of starch granules varied from oval to elliptical. Amylose content of mango kernel starches from different cultivars ranged from 9.1 to 16.3%. Totapuri kernel starch, with the largest mean granular size, had the highest amylose content, while Chausa kernel starch, with the lowest mean granular size had the lowest amylose content. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) were determined using differential scanning calorimetry (DSC). T_o, T_p and T_c varied from 73.4 to 76.3, 78.1 to 80.3 and 83.0 to 85.7 °C, respectively. Chausa kernel starch showed the highest T_o, T_p, T_c, ΔH_gel and peak height index among starches from different mango cultivars. The rheological properties of the starches from different mango cultivars measured using a dynamic rheometer, showed significant variations in the peak G′, G″ and peak tan δ values. Totapuri kernel starch showed the highest peak G′, G″, breakdown in G′ and lowest peak tan δ values. The large-size granules of Totapuri kernel starch appeared to be associated with higher values of peak G′ and G″. The turbidity of the gelatinized aqueous starch suspensions, from all mango cultivars, increased with increase in storage period. Dashehari starch paste showed lower turbidity values than other mango cultivars.     

Physicochemical,Thermal, Morphological and Pasting Properties of Starches from some Indian Black Gram (Phaseolus mungo L.) Cultivars

The starches separated from thirteen different black gram cultivars were investigated for physicochemical, thermal, morphological and pasting properties. Amylose content, swelling power, solubility and water binding capacity of starches ranged between 30.2–34.6%, 16.0–22.3 g/g, 14.8–17.3% and 73.5–84.5%, respectively. The diameter of starch granules, measured using a laser‐light scattering particle‐size analyzer, varied from 12.8 to 14.3 μm in all black gram starches. The shape of starch granules varied from oval to elliptical. The transition temperatures (T_o, T_p and T_c) and enthalpy of gelatinization (ΔH_gel) determined using differential scanning calorimetry, ranged between 66.1–71.3, 71.0–76.2, 75.9–80.4°C and 6.7–9.4 J/g, respectively. Pasting properties of starches measured using the Rapid Visco Analyser (RVA) also differed significantly. Pasting temperature, peak viscosity, trough, breakdown, final viscosity and setback were between 75.8–80.3°C, 422–514, 180–311, 134–212, 400–439 and 102–151 Rapid Visco Units (RVU), respectively. Turbidity values of gelatinized starch pastes increased during refrigerated storage. The relationships between different properties were also determined using Pearson correlation coefficients. Amylose content showed a positive correlation with swelling power, turbidity and granule diameter. Swelling power showed a negative correlation with solubility and setback. T_o, T_p and T_c showed positive correlation with turbidity, pasting temperature and were negatively correlated to peak and breakdown viscosity.     

Some properties of potatoes and their starches II. Morphological,thermal and rheological properties of starches

The physico-chemical, morphological, thermal and rheological properties of the starches separated from different potato cultivars (Kufri Jyoti, Kufri Badshah and Pukhraj) were studied. The starches separated from the mealier cultivars (Kufri Jyoti and Kufri Badshah) showed lower transition temperatures (T_o; T_p and T_c), peak height indices (PHI), and higher gelatinization temperature range (R) and enthalpies of gelatinization (ΔH_gel) than the starch from the least mealy cultivar (Pukhraj). Swelling power, solubility, amylose content and transmittance values were observed to be higher for Kufri Jyoti and Kufri Badshah potato starches, while turbidity values were lower for these starches. The rheological properties of starches, measured using a dynamic rheometer, showed significant variation in the peak G′, G″ and peak tan δ values. Kufri Badshah and Kufri Jyoti starches showed higher peak G′, G″ and lower peak tan δ values than Pukhraj starch during heating and cooling cycles. Kufri Jyoti and Kufri Badshah starches showed higher breakdown in G′ than starch from the Pukhraj potato cultivar. The large-sized granules of the starches from Kufri Badshah and Kufri Jyoti appeared to be associated with higher values of peak G′ and G″ and consistency coefficient. Starch from the least mealy cultivar (Pukhraj) showed higher retrogradation, which increased progressively during storage at 4 °C for 120 h.     

Comparison of starches separated from different Dioscorea bulbifera Linn. cultivars

The physico‐chemical, morphological, thermal, and crystal properties of the starches separated from three different rhizomes of Dioscorea bulbifera Linn. (D.BLH, Hubei; D.BLG1, Guangxitianlin; D.BLG2, Guangxiyulin) were studied and compared. A light microscopic technique was applied in order to quantify the integrity and shape of the starch granules after isolation. Amylose contents of different cultivars were in the range of 12.18–14.34%. Moisture content, ash content, swelling power, solubility, water‐binding capacity, and protein content of starches also differed significantly. The three different D. bulbifera starches all showed a typical C‐type pattern with crystallinity 45.36, 27.10, and 53.04%, corresponding to D.BLH, D.BLG1, and D.BLG2, respectively. The starch separated from the three starches above showed gelatinization range of 10.09, 11.55, and 7.26°C, corresponding to D.BLH, D.BLG1, and D.BLG2. The enthalpy of gelatinization (ΔH_gel) ranged from 1.28 to 3.11 J/g. Correlation analysis displayed that amylose content and relative crystallinity values were important in determining thermal starches.     

Physicochemical,Pasting, Thermal and Morphological Characteristics of Indian Water Chestnut (Trapa natans) Starch

Starch extracted from Indian water chestnut was investigated for its physicochemical characteristics. The results were compared with those obtained from two commercial starches (corn and potato). The pasting properties were tested in the Rapid Visco Analyser and thermal properties with a differential scanning calorimeter. Water chestnut starch possessed higher breakdown viscosity (BV) and setback viscosity (SV) than corn and potato starches. However, the pasting temperature of water chestnut starch was not significantly different from that of corn starch. Lower ΔH_gel values were obtained for water chestnut starch than for the other two starches whereas the onset, peak and conclusion temperatures of gelatinization (T_o, T_p and T_c) for water chestnut starch were quite comparable with corn starch. Scanning electron micrographs showed similarity in starch granule shape between water chestnut and potato starch with corn starch showing surface wrinkles on starch granule surfaces.     

Physicochemical,morphological, structural,and thermal characteristics of starches separated from Bulbus fritillaria of different cultivars

The starches studied from the nine Fritillaria species had differently shaped and sized granules but all of them showed the presence of smooth, round, or elliptic‐shaped, indicating that the isolation process did not destroyed the starch granules. The nine Fritillaria starches presented different AM content, moisture content, ash content, particle size, swelling power, solubility, water absorption capacity and light transmittance. The starches isolated from Chuan‐Beimu species exhibited a higher amount of crude protein content and lower amount of AM than other the groups, which had lower swelling power, higher solubility and light transmittance. All the nine Fritillaria starches had an XRD pattern of the B‐type. In addition, F. hupehensis, F. walujewii and F. ussuriensis starches with fairly large‐sized or irregular granules had higher T_p and ΔH_gel values than that isolated from the four Chuan‐Beimu species. The results obtained yielded information about the possible behavior of these starches when being used in certain applications. Cluster analysis results showed that this classification method based on macromolecule chemical compounds (starch) is original and credible in the quality control of various Beimu. In addition, it provided more information to the authentication systematics taxonomy methods including morphological, histological and molecular biological techniques of Fritillaria species.     

Properties of Starch Separated From Ten Mung Bean Varieties and Seeds Processing Characteristics

Starch samples from ten mung bean cultivars grown in china were isolated, and their morphology, physicochemical, thermal, and pasting properties were evaluated. The objectives of the study were to investigate the starch properties and processing characteristics of different mung bean varieties, and to establish the basic foundation of improving the functionality of mung beans and their starch grown in the region. The mung bean starches showed the kidney-shaped, elliptical, small spherical and dome-shaped granules, and the starches granule size varied between 5 and 40 μm. Total starch content, amylose content, solubility, and swelling power ranged from 54.73% to 57.99%, 40.44% to 41.82%, 13.72% to 17.67%, and 17.27% to 20.55%, respectively. The pasting properties were determined using a rapid visco analyzer, and various mung bean starches exhibited different pasting profiles. Different starches differed in transition temperatures (T _o, T _p, and T _c), gelatinization temperature range (ΔT _r), and enthalpy of gelatinization (ΔH) according to differential scanning calorimeter analysis. Hydration coefficient, degree of gelatinization, and hardness of mung bean varieties ranged from 51.97% to 84.46%, 62.99% to 95.11%, and 26.07 N to 112.11 N, respectively. This study indicated that starches separated from different mung bean cultivars possess different physicochemical characteristics, and various mung beans cultivars showed diverse processing properties.     

Structure and Viscoelastic Properties of Starches Separated from Different Legumes

A comparison between the morphological, structural, thermal and viscoelastic properties of starches separated from pigeon pea, chickpea, field pea, kidney bean and blackgram was made. The shape of the starch granules in the different legumes varied from oval to elliptical or spherical. X-ray diffraction of the legume starches indicated a typical C-pattern (mixture of A- and B-type). Granules of blackgram and pigeon pea starch had a higher degree of crystallinity than those of field pea and kidney bean starches. Apparent amylose content of field pea, kidney bean, chickpea, blackgram and pigeon pea starch was 37.9%, 36.0%, 34.4-35.5%, 32.9-35.6% and 31.8%, respectively. Distribution of isoamylase-branched materials among the starches revealed that the proportions of long and short side chains of amylopectin ranged between 13.6-18.5% and 41.7-46.5%, respectively. Field pea and kidney bean starch had the highest apparent amylose content and the lowest amount of long side chains of amylopectin, respectively. Blackgram and pigeon pea starch possessed higher proportions of both long and short side chains of amylopectin than field pea and chickpea starches. The onset, peak and conclusion temperatures of gelatinization (T_o T_p and T_c, respectively) were determined by differential scanning calorimetry. T_o and T_c ranged from 59.3 to 77.3°C, 66.8 to 79.6°C, 55.4 to 67.6°C and 68.3 to 69.3°C, respectively, for chickpea, blackgram, field pea and kidney bean starch. The enthalpy of gelatinization (ΔH_gel) of field pea, kidney bean, chickpea, blackgram and pigeon pea starches was 3.6, 3.0, 2.6-4.2, 1.6-1.7 and 2.6 J/g, respectively. Pastes of blackgram and pigeon pea starches showed lower storage and loss shear moduli G′ than field pea, kidney bean and chickpea starches. The changes in moduli during 10 h at 10°C revealed retrogradation in the order of: field pea> kidney bean> chickpea> blackgram> pigeon pea starch. In blackgram and pigeon pea starches, the lower proportion of amylose plus intermediate fraction and higher proportion of short and long side chains of amylopectin are considered responsible for the higher crystallinity, gelatinization temperature and enthalpy of gelatinization.     

Influence of Heat‐Moisture Treatment and Acid Modifications on Physicochemical,Rheological, Thermal and Morphological Characteristics of Indian Water Chestnut (Trapa natans) Starch and its Application in Biodegradable Films

Water chestnut starch was subjected to acid modification and heat‐moisture treatment. Hydrochloric acid was used for acid modification at three different concentrations (0.25 M, 0.5 M and 1 M) for 2 h. Modifications did not alter the granule morphology. Heat‐moisture treatment (HMT) resulted in slight reduction in the granular size of the starch granules. Acid modification lowered the amylose content, swelling power, water‐ and oil‐binding capacity but improved the solubility of starch to a considerable level. Light transmittance of acid‐modified (AM) starches improved significantly. A significant reduction in peak, trough, final and setback viscosity was observed by acid‐thinning. In case of heat‐moisture treated starch the final viscosity (F_v) was found to be even higher than the peak viscosity (P_v). Native water chestnut starch exhibited a lower onset temperature (T_o) and peak temperature (T_p) of gelatinization than the corresponding acid‐treated starches. Starch films prepared from native starch exhibited excellent pliability, whereas those prepared from AM and HMT starches showed good tensile strength. Starch films prepared from acid‐treated starches provided better puncture and tensile strength.     

Physicochemical,Morphological, Thermal and Pasting Properties of Starches Isolated from Rice Cultivars Grown in India

Physicochemical, morphological, thermal, and pasting properties of starches, isolated from basmati (HBC-19 and Bas-370) and non-basmati (Jaya, a coarse cultivar; P-44 and HKR-120, the medium cultivars and Sharbati, fine cultivar) rice cultivars grown in India were studied. The amylose content of starches from different cultivars ranged from 2.25 (Jaya) to 22.21 g/100 g of starch (HBC-19). Jaya, HKR-120, and P-44 cultivars showed soft gel consistency as 84, 73, and 69 mm, respectively, whereas Sharbati, Bas-370 and HBC-19 cultivars showed medium gel consistency as 54, 53, and 58 mm, respectively. Swelling power (at 95°C) indicated a significant positive correlation with amylopectin content (r = 0.828, p < 0.05) and gel consistency (r = 0.983, p < 0.01). Turbidity had a highly significant positive correlation with solubility (r = 0.919, p < 0.01) and amylose content (r = 0.945, p < 0.01). Starch form Jaya cultivar showed the presence of smallest size granules (2.4–5.7 μm) with an average size of 3.96 μm, whereas Bas-370 showed the presence of largest size granules (3.3–6.7 μm) with an average size of 5.0 μm. The transition temperatures, enthalpy of gelatinization (ΔH_gel), peak height index (PHI) and gelatinization range were determined using differential scanning calorimetry (DSC). The starch from Sharbati cultivar showed highest onset temperature (T_o), peak temperature (T_p), conclusion temperature (T_c), enthalpy of gelatinization and peak height index (PHI) of 68.8°C, 73.2°C, 79.0°C, 11.56 J/g and 2.63 respectively. Pasting temperature of rice starches varied from 68.9°C (Jaya) to 74.5°C (Sharbati). The peak viscosities observed were in the range of 2223 to 3297 cP, lowest for HBC-19 starch and highest for Jaya starch.     

Effects of Heating,Vacuum Drying and Steeping on Gelatinization Properties and Dynamic Viscoelasticity of Various Starches

Starches having A‐ and B‐type X‐ray diffraction patterns (A‐ and B‐type starches) were modified by heating at 120 °C for 2 h (HT), vacuum drying at room temperature for 20 h (VD) and steeping at 50 °C for 20 h (ST). The properties of starches were compared using differential scanning calorimetry (DSC) and dynamic viscoelasticity behavior during heat processing (G' behavior). As observed by DSC, HT rarely changed the gelatinization properties for A‐type starches, but decreased the gelatinization temperatures and enthalpies (ΔH) for B‐type starches. A shift of the X‐ray diffractograms from B‐type to A‐type patterns was not detected after HT. Similar changes in gelatinization properties were observed for B‐type starches after VD. ST increased the gelatinization temperatures and also narrowed the gelatinization temperature range irrespective of crystal type. Both HT and VD decreased the peak temperature (T_p) in G' behavior and increased the peak G' value for B‐type starches. ST increased T_p and also decreased the peak G' value irrespective of starch crystal type. G' values after reaching T_p — which indicate the viscoelasticity of the swollen starch granules without breakdown — showed significant increases only for B‐type starches after HT.     

Studies on the morphological,thermal and rheological properties of starch separated from some Indian potato cultivars

The starches separated from five different Indian potato cultivars (Kufri Chandermukhi, Kufri Badshah, Kufri Jyoti, Kufri Sindhuri and S1) were investigated for morphological, thermal, rheological, turbidity and water-binding properties. The starch separated from all the five potato cultivars had a granule size ranging between 15–20 μm and 20–45 μm. The shape of starch granules varied from oval to irregular or cuboidal. Starch isolated from cv. Kufri Badshah had largest irregular or cubiodal granules while starch from cv. Kufri Chandermukhi had small and oval granules. The transition temperatures and enthalpy of gelatinization (ΔH_gel) were determined using differential scanning calorimetry (DSC). The enthalpy of retrogradation (ΔH_ret) of gelatinized starch was also determined after 14 days of storage at 4°C using DSC. Kufri Chandermukhi starch showed the lowest ΔH_gel and ΔH_ret while Kufri Badshah starch showed the highest values. ΔH_gel and ΔH_ret values of 12.55 J/g and 6.42J/g, respectively, for Kufri Chandermukhi starch against 13.85 J/g and 8.61 J/g, respectively, for Kufri Bhadshah starch were observed. Rheological properties of starches from different potato cultivars, measured using the Dynamic Rheometer during heating and cooling, also differed significantly. The starch from cv. Kufri Badshah showed the highest peak G′ and G″ and lowest tan δ. The starches having higher peak G′(G′ at gelatinization temperature) showed higher breakdown in G′ and vice versa. The turbidity of gelatinized aqueous starch suspensions from all potato cultivars increased with increase in storage period. Starches with low water binding capacity had higher G′ and G″ and lower tan δ values.     

Effect of Heat‐Moisture Treatment on Structural and Thermal Properties of Rice Starches Differing in Amylose Content

Starches from glutinous rice (1.4% amylose), Jasmine rice (15.0% amylose) and Chiang rice (20.2% amylose) were exposed to heat‐moisture treatment (HMT) at 100 °C for 16 h and at different moisture levels (18, 21, 24 and 27%). The effect of heat‐moisture treatment on structural and thermal properties of these three rice starches was investigated. The HMT did not change the size, shape and surface characteristics of rice starch granules. The A‐type crystalline pattern of rice starches remained unchanged after HMT. The relative crystallinity (RC) and the ratio of short‐range molecular order to amorphous (RSA) of heat‐moisture treated glutinous and Jasmine rice starches decreased with increasing moisture level of the treatments. In contrast, the RC of the treated Chiang rice starch remained practically unchanged. A peak of crystalline V‐amylose‐lipid complexes was clearly presented in all treated Chiang rice starches. The peak became progressively stronger with increasing moisture level of the treatment. Differential scanning calorimetry (DSC) of all treated rice starches showed a shift of the gelatinization temperature to higher values. Increasing moisture level of the treatments increased the onset gelatinization temperature (T_o) but decreased the gelatinization enthalpy (ΔH) of rice starches. A broad gelatinization temperature range (T_c‐T_o) with a biphasic endotherm was found for all treated Chiang rice starches and Jasmine rice starch after HMT₂₇ (HMT at 27% moisture level). Additionally the (T_c‐T_o) of treated Chiang rice starches increased linearly with increasing moisture level of the treatments.     

Effect of Amylose Content on Gelatinization,Retrogradation and Pasting Properties of Flours from Different Cultivars of Thai Rice

Presently, rice cultivars are categorized according to amylose content into three groups: low, medium and high amylose content cultivars. The correlation of amylose content with gelatinization properties, retrogradation, and pasting properties of eleven cultivars of Thai rice were investigated. Rice flour was prepared from milled rice by the wet grinding process. Onset (T_o), peak (T_p) and conclusion (T_c) temperatures of gelatinization, (determined by DSC) were found to be highly positively correlated with amylose levels. This correlation could be used for prediction of amylose content of rice flour. Low amylose starch could also be characterized by low degree of retrogradation (%R). The data obtained from RVA‐viscograms (peak viscosity, breakdown, setback, and pasting temperature) can be used only for characterization of the group of low amylose starches (waxy rice). It was demonstrated that low amylose rice starch provided the highest peak viscosity and breakdown and the lowest setback and pasting temperature among the groups investigated.     

Effect of Cross‐linking with Epichlorohydrin on the Properties of Cassava (Manihot esculenta Crantz) Starch

Cassava starch was cross‐linked with epichlorohydrin (EPI) at 45°C for 2 h in three different media which include water, water in the presence of a phase transfer catalyst (PTC) and N,N‐dimethylformamide (DMF). The products were characterized by determining their physicochemical, thermal and retrogradation properties. In aqueous medium, the use of a PTC, tetrabutylammonium bromide (TBAB) produced derivatives with higher degree of cross‐linking than those prepared without the use of the catalyst. The degree of cross‐linking was found to be higher using the same concentration of EPI when the reaction was carried out in DMF. At low levels of cross‐linking, the peak viscosity of the cross‐linked starches increased in comparison to that of the native starch. With increasing degree of cross‐linking, the peak viscosity showed a significant reduction. The swelling volume, solubility and light transmittance of the starch pastes were lower for the modified starches. The cross‐linked starches showed slightly reduced values for the gelatinization temperatures, T_onset, T_peak and T_end. The enthalpy of gelatinization of the modified starches increased with increase in the degree of cross‐linking. The modified starches exhibited higher water‐binding capacities (WBC) than the native starch; but with increase in the degree of cross‐linking, there was a gradual decrease in WBC. The in vitro alpha amylase digestibility of the modified starches decreased gradually with increase in the level of cross‐linking.     

Physicochemical and Gelatinization Properties of Starches Separated from Various Rice Cultivars

Morphological, viscoelastic, hydration, pasting, and thermal properties of starches separated from 10 different rice cultivars were investigated. Upon gelatinization, the G′ values of the rice starch pastes ranged from 37.4 to 2057 Pa at 25 °C, and remarkably, the magnitude depended on the starch varieties. The rheological behavior during gelatinization upon heating brought out differences in onset in G′ and degree of steepness. The cultivar with high amylose content (Goami) showed the lowest critical strain (γ_c), whereas the cultivars with low amylose content (Boseokchal and Shinseonchal) possessed the highest γ_c. The amylose content in rice starches affected their pasting properties; the sample possessing the highest amylose content showed the highest final viscosity and setback value, whereas waxy starch samples displayed low final viscosity and setback value. The onset gelatinization temperatures of the starches from 10 rice cultivars ranged between 57.9 and 64.4 °C. The amylose content was fairly correlated to hydration and pasting properties of rice starches but did not correlate well with viscoelastic and thermal characteristics. The combined analysis of hydration, pasting, viscoelastic, and thermal data of the rice starches is useful in fully understanding their behavior and in addressing the processability for food applications.