Effect of curauá fiber content on the properties of poly(hydroxybutyrate‐co‐valerate) composites

Poly(hydroxybutyrate‐co‐valerate) (PHBV), a biodegradable polymer produced from a renewable microbiological source, was reinforced with varying amounts of curauá fibers (CFs). The composites were produced using a twin‐screw extrusion and injection process. Scanning electron microscopy showed poor adhesion between the matrix and fiber; however, mechanical testing showed that the addition of the fiber improved the mechanical properties. Composites with 20 and 30 wt% CF displayed the best properties; however, because of the difficulties in processing composites with a CF content of 30 wt%, it was concluded that the ideal content of CF was 20 wt%. POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Preparation,structure, and properties of the PTT/SGF composites

Short glass fiber reinforced poly(trimethylene terephthalate) composites (PTT/SGF) were prepared by twin screw extruder. The structural feature and physical properties of these composites were studied by scanning electron microscope, differential scanning calorimetry, thermalgravimetric analyzer, capillary rheometer, universal tester, etc. The glass fiber was modified by the silane coupling agent before being blended with the polymer. The results suggest that there is strong interaction between SGF and PTT matrix, which leads to an increasing on the tensile strength, Young's modulus, impact strength and thermal stability of the composites with proper contents of SGF. Rheological behavior of the PTT/SGF composites melt is complicated, combining a dilate fluid at lower shear rate and a pseudo-plastic fluid at higher shear rate. The melt apparent viscosity of composites decreases with increasing SGF content because of the rigid fibers improving the flow of the melt. Moreover, the flow activation energy of the composites suggests that the melt with more SGF has lower sensitivity to the processing temperature. In conclusion, the composite with 10–20 wt% content of SGF has better properties. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Influence of fly ash cenospheres on performance of coir fiber‐reinforced recycled high‐density polyethylene biocomposites

Recycled high‐density polyethylene (RHDPE)/coir fiber (CF)‐reinforced biocomposites were fabricated using melt blending technique in a twin‐screw extruder and the test specimens were prepared in an automatic injection molding machine. Variation in mechanical properties, crystallization behavior, water absorption, and thermal stability with the addition of fly ash cenospheres (FACS) in RHDPE/CF composites were investigated. It was observed that the tensile modulus, flexural strength, flexural modulus, and hardness properties of RHDPE increase with an increase in fiber loading from 10 to 30 wt %. Composites prepared using 30 wt % CF and 1 wt % MA‐g‐HDPE exhibited optimum mechanical performance with an increase in tensile modulus to 217%, flexural strength to 30%, flexural modulus to 97%, and hardness to 27% when compared with the RHDPE matrix. Addition of FACS results in a significant increase in the flexural modulus and hardness of the RHDPE/CF composites. Dynamic mechanical analysis tests of the RHDPE/CF/FACS biocomposites in presence of MA‐g‐HDPE revealed an increase in storage (E′) and loss (E″) modulus with reduction in damping factor (tan δ), confirming a strong influence between the fiber/FACS and MA‐g‐HDPE in the RHDPE matrix. Differential scanning calorimetry, thermogravimetric analysis thermograms also showed improved thermal properties in the composites when compared with RHDPE matrix. The main motivation of this study was to prepare a value added and low‐cost composite material with optimum properties from consumer and industrial wastes as matrix and filler. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42237.     

Experimental investigation on the influence of the composition on the morphology and the mechanical properties of short glass fiber‐reinforced polypropylene nanocomposites

Polypropylene composites containing 0–5 wt% layered silicate and 0–30 wt% short glass fibers are prepared by melt compounding. To investigate the influence of different compositions on the mechanical properties of short glass fiber‐reinforced polypropylene nanocomposites, materials with various filler contents are prepared. At a glass fiber content of 10 wt% Young's modulus of the layered silicate‐containing composites decreases by around 30% compared to conventional glass fiber‐reinforced polypropylene. But at higher glass fiber loadings, an increasing modulus of up to 10% is observed. However, the addition of layered silicate results in large decreases of the tensile and the notched impact strength. A maleic anhydride‐grafted polypropylene enhances Young's modulus and the tensile strength. © 2012 Society of Plastics Engineers     

Mechanical,morphological, and thermal properties of poly(vinyl chloride)/low‐density polyethylene composites filled with date palm leaf fiber

This article investigates the mechanical, morphological, and thermal properties of poly(vinyl chloride) (PVC) and low‐density polyethylene (LDPE) blends, at three different concentrations: 20, 50, and 80 wt% of LDPE. Besides, composite samples that were prepared from PVC/LDPE blend reinforced with different date palm leaf fiber (DPLF) content, 10, 20, and 30 wt%, were also studied. The sample in which PVC/LDPE (20 wt%/80 wt%) had the greatest tensile strength, elongation at break, and modulus. The good thermal stability of this sample can be seen that T_10% and T_20% occurred at higher temperatures compared to others blends. DPLF slightly improved the tensile strength of the polymer blend matrix at 10 wt% (C10). The modulus of the composites increased significantly with increasing filler content. Ageing conditions at 80°C for 168 h slightly improved the mechanical properties of composites. Scanning electron microscopic micrographs showed that morphological properties of tensile fracture surface are in accordance with the tensile properties of these blends and composites. Thermogravimetric analysis and derivative thermogravimetry show that the thermal degradation of PVC/LDPE (20 wt%/80 wt%) blend and PVC/LDPE/DPLF (10 and 30 wt%) composites took place in two steps: in the first step, the blend was more stable than the composites. In the second step, the composites showed a slightly better stability than the PVC/LDPE (20 wt%/80 wt%) blend. Based on the above investigation, these new green composites (PVC/LDPE/DPLF) can be used in several applications. J. VINYL ADDIT. TECHNOL., 25:E88–E93, 2019. © 2018 Society of Plastics Engineers     

Improvement in mechanical and thermal properties of unsaturated polyester- based hybrid composites

Polymer matrix composites are used in automobile, structure and aerospace industries due to their light weight and high strength. The present research has an aim to reinforce locally developed silica nanoparticles and glass fibers in unsaturated polyester to produce polymer-based hybrid composites. Composites were synthesized by hand lay-up method with 1, 2, 3 and 4 wt% of silica sand nanoparticles and glass fiber. Mechanical tests like tensile, impact and micro-hardness were performed on the obtained polymer hybrid composites. The results of mechanical properties of the hybrid polymer matrix composites revealed an increasing trend. The SEM analysis was performed on the developed and fractured tensile testing samples. The SEM analysis showed the presence of silica nanoparticles in the samples and pulling action of fibers were seen under fractured tensile tests. The pulling actions of fibers from polymer matrix delayed the fractured mechanism and enhanced the mechanical properties. Silica nanoparticles filled the cavities generated during tensile test and extensive enhancement was revealed in tensile as well as impact energy. Toughness of the hybrid composite was also enhanced as a result. The thermal properties of the hybrid polymer composites were analyzed using thermogravimetric analysis. Thermal stability of the composite has been marginally increased with increasing wt% of reinforcement.     

An investigation for the effect of recycled matrix on the properties of textile waste cotton fiber reinforced (T‐FRP) composites

The main objective of this research is to study the effect of recycled low density polyethylene (r‐LDPE) matrix on the tensile, impact, and flexural properties of the novel textile waste cotton fiber reinforced (T‐FRP) composites. For this purpose, the T‐FRP composites were manufactured by using two different matrix types; namely, virgin LPDE (v‐LDPE) and r‐LDPE, with different waste cotton fiber content. All composites were compatibilized by maleic anhydride‐LDPE (MA‐LDPE) in order to increase the interfacial adhesion between fibers and matrices. Differential scanning calorimetry, Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic mechanical analyzer studies were performed in order to characterize the materials. The results have shown that best tensile and flexural properties have been obtained from the composites with the content of 30 wt% cotton fiber, 5 wt% maleic anhydride‐LDPE, and 65 wt% recycled LDPE matrix. However, the impact properties of the composites were decreased drastically compared to the pure LDPE matrix. POLYM. COMPOS., 38:1231–1240, 2017. © 2015 Society of Plastics Engineers     

Mechanical,thermal and dynamic‐mechanical behavior of banana fiber reinforced polypropylene nanocomposites

Natural fiber‐reinforced nanocomposites based on polypropylene/nanoclay/banana fibers were fabricated by melt mixing in a twin‐screw extruder followed by compression molding in this current study. Maleic anhydride polypropylene copolymer (MA‐g‐PP) was used as a compatibilizer to increase the compatibility between the PP matrix, clay, and banana fiber to enhance exfoliation of organoclay and dispersion of fibers into the polymer matrix. Variation in mechanical, thermal, and physico‐mechanical properties with the addition of banana fiber into the PP nanocomposites was investigated. It was observed that 3 wt% of nanoclay and 5 wt% of MA‐g‐PP within PP matrix resulted in an increase in tensile and flexural strength by 41.3% and 45.6% as compared with virgin PP. Further, incorporation of 30 wt% banana fiber in PP nanocomposites system increases the tensile and flexural strength to the tune of 27.1% and 15.8%, respectively. The morphology of fiber reinforced PP nanocomposites has been examined by using scanning electron microscopy and transmission electron microscopy. Significant enhancement in the thermal stability of nanocomposites was also observed due to the presence of nanoclay under thermogravimetric analysis. Dynamic mechanical analysis tests revealed an increase in storage modulus (E′) and damping factor (tan δ), conforming the strong interaction between nanoclay/banana fiberand MA‐g‐PP in the fiber‐reinforced nanocomposites systems. POLYM. COMPOS., © 2011 Society of Plastics Engineers.     

Effect of chemical treatment on the properties of coir fiber reinforced polypropylene and polyethylene composites

Chemical treatment of reinforcement material is one of the main ways of improving the mechanical properties of natural fiber reinforced polymer composites. In the present study, coir fiber was used as reinforcement material, while polypropylene (PP) and polyethylene (PE) polymer were used as matrix material. Before reinforcing with polymer, raw coir fiber was chemically treated with basic chromium sulfate and sodium bicarbonate in a sieve shaker. Hot‐pressed method was used for composite manufacturing during which the fiber loading was varied at 0, 5, 10, 15, and 20 wt%. Comparison of the properties of raw and chemically treated coir fiber reinforced PP and PE was conducted. Mechanical characteristics of the composites were evaluated using tensile, flexural, impact, and hardness tests. Water absorption test was conducted to know water uptake characteristics. Microstructural analysis using a scanning electron microscope was performed to observe the adhesiveness between the matrix and the fiber. Thermogravimetric analysis was done to observe the physical and chemical changes in fiber and composites. The results showed that chemical treatment improved the physical, mechanical, and thermal properties of the manufactured composites. PP composites had better properties as compared to PE composites, while higher fiber loading resulted in better mechanical properties of the resultant composites. POLYM. COMPOS., 38:1259–1265, 2017. © 2015 Society of Plastics Engineers     

Isolation and characterization of betel nut leaf fiber: Its potential application in making composites

Betel nut leaf fiber (BNLF) is a new finding as cellulosic filler for polymer composites. Its main constituents are 75% α‐cellulose, 12% hemicelluloses, 10% lignin, and 3% others matter, viscosity average molecular weight 132,000 and degree of crystallinity 70%. In the present work, BNLF reinforced polypropylene (PP) composites were prepared using heat press molding method. 5–20 wt% short length fiber is taken for getting benefits of easy manufacturing and the fiber was chemically treated with NaOH, dicumyl peroxide (DCP), and maleic anhydride‐modified PP (MAPP) to promote the interfacial bond with PP. The extent of modification of fiber was assessed on the basis of morphology, bulk density, moisture absorption, thermal, and mechanical properties of untreated fiber, treated fiber, and their reinforcing PP composites. The tensile and flexural strength of composites increase with the increase of fiber loading up to 10 and 20 wt%, respectively. It was also observed that Young's modulus and flexural modulus increase with fiber loading. The thermal degradation behavior of resulting composites was investigated. Among the various treated fibers, MAPP‐treated fiber composite showed best interfacial interactions as well as mechanical and thermal properties. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

New hybrid method for simultaneous improvement of tensile and impact properties of carbon fiber reinforced composites

For weight savings of automobiles to improve fuel efficiency, tensile and impact strengths of carbon fiber reinforced composites (CFRC) are important properties required for substitution of metallic or ceramic automotive parts by CFRC parts. Effect of surface treatments of carbon fiber (CF) such as plasma, nitric acid, and liquid nitrogen treatments on interfacial bonding and mechanical properties of CF reinforced thermoplastic composites was investigated and nitric acid treatment was the best method to improve the interfacial affinity between the used CF and thermoplastic polymer matrix since the treatment induced acidic functional groups on the surface and increased surface roughness simultaneously. A new hybrid fabrication method was suggested by applying a bi-component two-layer structure to the film insert molding to improve tensile and impact strengths of CFRC simultaneously. Compared with tensile and impact strengths of the base polymer, those of the new hybrid composites filled with rubber particles and CF were improved by about 41.3% and 105.7%, respectively. In particular, tensile and impact strengths of the composite specimen prepared by the hybrid fabrication method were improved by about 15.0% and 36.0%, respectively when compared with those of the composite specimen prepared by the conventional melt mixing.     

A comparative study on some properties of wood plastic composites using canola stalk,Paulownia, and nanoclay

In this research, the reinforcing effect of fillers including canola stalk, paulownia and nanoclay, in polypropylene (PP) has been investigated. In the sample preparation, 50 wt% of lignocellulosic materials and 0, 3, and 5 wt% of nanoclay particles were used. The results showed that while flexural and tensile properties were moderately enhanced by the addition of nanoclay in the matrix, notched Izod impact strengths decreased dramatically. However, with increase in the nanoclay content (5 wt%), the flexural and tensile properties decreased considerably. The mechanical properties of composites filled with paulownia are generally greater than canola stalk composites, due to the higher aspect ratio. The thickness swelling and water absorption of the composites significantly decreased with the increase in nanoclay loading. Except tensile modulus, the differences between the type of fibrous materials and nanoclay contents had significant influence on physicomechanical properties. Morphologies of the composites were analyzed using transmission electron microscopy (TEM) and X‐ray diffraction (XRD), and the results showed increased d‐spacing of clay layers indicating enhanced compatibility among PP, clay, and lignocellulosic material. TEM micrographs also confirmed that the composites containing 3 wt% nanoclay had uniform dispersion and distribution of clay layers in the polymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Influence of PTFE as a solid lubricant on the mechanical,electrical, and tribological properties of CF-reinforced PC composites

The objective of this research was to study the effects of polytetrafluoroethylene (PTFE) as a solid lubricant on the mechanical, electrical, and tribological properties of carbon fiber (CF)-reinforced polycarbonate (PC) composites. Samples were prepared by means of single-screw extrusion and injection molding processes. The mechanical tests included tensile, flexural, and failing weight impact tests, while the electrical tests consisted of surface and volume resistivity tests. The tribological testing was conducted under dry sliding conditions using pin-on-disk configuration. The results showed that the addition of CF managed to significantly reduce the electrical resistivity as the CF loading approached 10–15 wt%. The addition of PTFE managed to reduce the resistivity of the composite, that is, from 4.51 to 0.53 × 10 (Ωcm). The incorporation of 15 wt%. CF resulted with an increase of 45% in tensile strength and 51.5% in flexural strength, while the addition of PTFE had a negative impact on both properties. It was shown that PTFE was able to reduce the friction coefficient, μ and wear rate, K up to 0.257 and 6.35 × 10⁶ (mm³/Nm), respectively, which can be attributed to the excellent abilities of PTFE to form transfer film. The composite consisting of 15 wt% CF and 10 wt%. PTFE showed highest improvement in term of electrical resistivity, and is deemed the most suitable composition for this study. Scanning electron microscopy was also carried out to further elucidate the fracture and wear mechanism of the PC/CF/PTFE composites.     

短切CF增强TPEE热塑性复合材料的注射成型及力学性能研究

以热塑性聚酯弹性体(TPEE)为基体材料,8 mm短切碳纤维(CF)为增强材料,制备CF/TPEE复合材料。材料通过双螺杆挤出系统混合塑化、挤出造粒后,再经过注塑成型制备成标准拉伸试样,通过力学性能测试及微观结构观察,系统研究了碳纤维含量和等离子表面处理对CF/TPEE复合材料拉伸性能的影响。结果表明,当碳纤维含量为20%时,CF/TPEE复合材料的拉伸强度最大,为39.08 MPa;相比于纯TPEE,其拉伸强度提高了217%;经过等离子表面处理后,拉伸强度进一步提高了5%。结合拉伸后断面的SEM图发现,注塑试样表层碳纤维取向度高,而近中区和中心层取向度相对较低,这是注射CF/TPEE复合材料拉伸性能提高效应不明显的主要原因。     

Effects of novolac resin modification on mechanical properties of carbon fiber/epoxy composites

The epoxy resin matrix of carbon fiber (CF)‐reinforced epoxy composites was modified with novolac resin (NR) to improve the matrix‐dominated mechanical properties of composites. Flexural strength, interlaminar shear strength (ILSS), and impact strength were measured with unfilled, 7 wt% NR, 13 wt% NR, and 18 wt% NR filled to epoxy to identify the effect of adding NR on the mechanical properties of composites. The results showed that both interfacial and impact properties of composites were improved except for flexural property. The largest improvement in ILSS and impact strength were obtained with 13 wt% loading of NR. ILSS and impact strength were improved by 7.3% and 38.6%, respectively, compared with the composite without NR. The fracture and surface morphologies of the composite specimens were characterized by scanning electron microscopy. Intimate bonding of the fibers and the matrix was evident with the content of 7–13 wt% NR range. Decrease of crosslinking density and formation of NR transition layer were deduced with adding NR. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Polyphenylene sulphide/carbon fiber composites: study on their thermal,mechanical and microscopic properties

The present study investigates the thermal, mechanical and microscopic properties of polyphenylene sulphide/carbon fiber (PPS/CF) composites by incremental number of fiber layers. The composites were prepared by hand lay-up technique followed by compression molding. A superior matrix-reinforcement adhesion was attained without the use of coupling agent and mechanical stability of the composites improved with increasing fiber layers. Transverse rupture strength and bending modulus were improved by 59.84 and 125.21 %, respectively, without loss in toughness. Impact strength and hardness values were enhanced while storage modulus, loss modulus and damping factor were dropped by increases in fiber layers. Thermogravimetric analysis (TGA) indicated a gradual rise in thermal stability (16.84 %) of the composite as compared to pure matrix. Surface morphology and crack propagation were studied by optical microscopy. It was found that crack was propagated in a linear plane by applying load. In addition, scanning electron microscopy (SEM) illustrated steady alignment of fibers and uniform distribution of the matrix around reinforcement. Based on the obtained results, fiber layers showed great potential for enhancement of thermal and mechanical properties of the composites.     

Effect of macromolecular coupling agent on the property of PP/GF composites

Silane‐grafted polypropylene manufactured by a reactive grafting process was used as the coupling agent in polypropylene/glass‐fiber composites to improve the interaction of the interfacial regions. Polypropylene reinforced with 30% by weight of short glass fibers was injection‐molded and the mechanical behaviors were investigated. The results indicate that the mechanical properties (tensile strength, tensile modulus, flexural strength, flexural modulus, and Izod impact strength) of the composite increased remarkably as compared with the noncoupled glass fiber/polypropylene. SEM of the fracture surfaces of the coupled composites shows a good adhesion at the fiber/matrix interface: The fibers are coated with matrix polymer, and a matrix transition region exists near the fibers. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1537–1542, 1999     

Enhanced mechanical properties of acrylate based shape memory polymer using grafted hydroxyapatite

In the present study, the effect of grafted and ungrafted hydroxyapatite (HAp) filler on the mechanical properties of acrylate based shape memory polymer (SMP) composite is reported. HAp is grafted with polyethylene glycol methacrylate (PEGMA) monomer to avoid agglomeration and the same is embedded as reinforcement in tBA – PEGDMA matrix (70 wt% tBA: tert-butyl acrylate +30 wt% PEGDMA: polyethylene glycol dimethacrylate). The grafting process improved the interfacial interactions of the particles, dispersed in the polymer system and subsequently enhanced the mechanical properties of the shape memory polymer composites. The morphology of HAp particles is investigated by field emission scanning electron microscopy. The mechanical properties of SMP composites are evaluated at room temperature and above glass transition temperature (Tg) with grafted and ungrafted HAp particles. The addition of grafted HAp significantly improved the tensile strength (40%) and shape recovery rate (25%) of the SMP composite when compared to the SMP composite containing ungrafted HAp. SMP composite containing grafted HAp exhibited higher cell viability compared to the neat SMP and the SMP composite containing ungrafted HAp.     

Physical,mechanical, and water absorption behavior of coir/glass fiber reinforced epoxy based hybrid composites

Fiber reinforced polymer composites has been used in a variety of application because of their many advantages such as relatively low cost of production, easy to fabricate, and superior strength compare to neat polymer resins. Reinforcement in polymer is either synthetic or natural. Synthetic fiber such as glass, carbon, etc. has high specific strength but their fields of application are limited due to higher cost of production. Recently there is an increase interest in natural composites which are made by reinforcement of natural fiber. In this connection, an investigation has been carried out to make better utilization of coconut coir fiber for making value added products. The objective of the present research work is to study the physical, mechanical, and water absorption behavior of coir/glass fiber reinforced epoxy based hybrid composites. The effect of fiber loading and length on mechanical properties like tensile strength, flexural strength, and hardness of composites is studied. The experimental results reveal that the maximum strength properties is observed for the composite with 10 wt% fiber loading at 15 mm length. The maximum flexural strength of 63 MPa is observed for composites with 10 wt% fiber loading at 15 mm fiber length. Similarly, the maximum hardness value of 21.3 Hv is obtained for composites with 10 wt% fiber loading at 20 mm fiber length. Also, the surface morphology of fractured surfaces after tensile testing is examined using scanning electron microscope (SEM). POLYM. COMPOS., 35:925–930, 2014. © 2013 Society of Plastics Engineers