Nucleation effect of surface treated TiO2 on Poly(trimethylene terephthalate) (PTT) nanocomposites

A study of the nucleation effect of TiO₂ in poly(trimethylene terephthalate)/TiO₂ nanocomposite has been carried out using different theoretical models. The models were applied and developed with the aim to describe and better understand the influence of the TiO₂ dispersion on crystallization characteristics of PTT. The PTT/TiO₂ nanocomposites with untreated and surface‐treated TiO₂ were prepared by the melt mixing method. The nucleation efficiency of the TiO₂ nanoparticles has been analyzed with the use of the Avrami model and Mo's method. It was found that the PTT matrix incorporated with surface‐treated TiO₂ particles has a higher crystallization temperature and melting point than that incorporated with untreated TiO₂ particles. As per the models, unlike untreated TiO₂, surface‐treated TiO₂ particles had a lesser effect on the degree of crystallization of the PTT matrix. The TiO₂ nanoparticles act as a nucleating agent in the PTT matrix thereby reducing t_½ of the crystallization and leading to easier crystallization of the polymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of carbon‐coated titanium dioxide nanoparticles as a photostabilizer on the photodegradation of rigid poly(vinyl chloride)

In this study, nanocomposites of rigid poly(vinyl chloride) (UPVC) using the synthesized carbon‐coated titanium dioxide (TiO₂) nanoparticles and commercial powder of titanium dioxide (with rutile structure) were prepared by melt blending. The presence of carbon‐coated TiO₂ nanoparticles with rutile structure in UPVC matrix led to an improvement in photo stability of UPVC nanocomposites in comparison with commercial UPVC. The photocatalytic degradation behavior of nanocomposites was investigated by measuring their structural changes, surface tension, and mechanical and morphological properties before and after UV exposure for 700 h. It was found that mechanical and physical properties of UPVC nanocomposites are not considerably reduced after UV exposure in the presence of carbon‐coated TiO₂ nanoparticles even in small percentage of nanoparticles in comparison with the presence of commercial TiO₂ particles. Therefore, it can be concluded that UPVC/TiO₂ nanocomposite with low content of carbon‐coated TiO₂ nanoparticles(0.25 wt %) illustrated high stability under light exposure. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40228.     

Mechanical properties and nonisothermal crystallization kinetics of polyamide 6/functionalized TiO2 nanocomposites

Titanium dioxide (TiO₂) nanoparticles were pretreated with excessive toluene‐2,4‐diisocyanate (TDI) to synthesize TDI‐functionalized TiO₂ (TiO₂‐NCO), and then polymeric nanocomposites consisting of polyamide 6 (PA6) and functionalized‐TiO₂ nanoparticles were prepared via a melt compounding method. The interfacial interaction between TiO₂ nanoparticles and polymeric matrix has been greatly improved due to the isocyanate ( NCO) groups at the surface of the functionalized‐TiO₂ nanoparticles reacted with amino groups ( NH₂) or carboxyl ( COOH) groups of PA6 during the melt compounding and resulted in higher tensile and impact strength than that of pure PA6. The nonisothermal crystallization kinetics of PA6/functionalized TiO₂ nanocomposites was investigated by differential scanning calorimetry (DSC). The nonisothermal crystallization DSC data were analyzed by the modified‐Avrami (Jeziorny) methods. The results showed that the functionalized‐TiO₂ nanoparticles in the PA6 matrix acted as effective nucleation agents. The crystallization rate of the nanocomposites obtained was faster than that of the pure PA6. Thus, the presence of functionalized‐TiO₂ nanoparticles influenced the mechanism of nucleation and accelerated the growth of PA6 crystallites. POLYM. COMPOS., 35:294–300, 2014. © 2013 Society of Plastics Engineers     

Crystallization behavior of poly(ϵ‐caprolactone)/Tio2 nanocomposites obtained by in situ polymerization

Poly(?‐caprolactone) (PCL)/titanium dioxide (TiO₂) nanocomposites were prepared by in situ polymerization of ?‐caprolactone in the presence of modified‐TiO₂ nanoparticles as initiators. The molecular weight of PCL matrix was dependent on the amount of the TiO₂ fillers. The incorporation of TiO₂ did not significantly affect the crystalline structure of PCL. Moreover, a tendency of the nanoparticles to form aggregates was observed, especially at higher fillers contents. The analysis of the crystallization process showed that the addition of TiO₂ nanoparticles accelerated the crystallization rate of PCL, and the crystallization rates increased by increasing the filler content. The crystallization activation energy dependence on the filler content observed here is probably the consequence of the two competing factors. The tendency of activation energy obtained by nonisothermal crystallization is similar to that of isothermal crystallization. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Crystallization behavior and UV‐protection property of PET‐ZnO nanocomposites prepared by in situ polymerization

The aim of this study was to investigate the crystallization behavior and UV‐protection property of polyethylene terephthalate (PET)‐ZnO nanocomposits. PET‐ZnO nanocomposites containing 0.5–3.0 wt % of ZnO were successfully synthesized by in situ polymerization. The Fourier transformed infrared (FTIR) spectroscopy indicated the silane coupling agent was anchored onto the surface of ZnO. Scanning electron microscope (SEM) images showed ZnO particles were dispersed homogeneously in PET matrix with amount of 0.5–1.0 wt %. Differential scanning calorimetry (DSC) results exhibited that the incorporation of ZnO into PET resulted in increase of the melting transition temperature (T_m) and crystallization temperature (T_c) of PET‐ZnO nanocomposites. The crystallization behavior of PET and PET‐ZnO nanocomposites was strongly affected by cooling rate. ZnO nanoparticles can act as an efficient nucleating agent to facilitate PET crystallization. UV–vis spectrophotometry showed that UV‐ray transmittance of PET‐ZnO nanocomposites decreased remarkably and reached the minimum value of 14.3% with 1.5 wt % of ZnO, compared with pure PET whose UV‐ray transmittance was 84.5%. PET‐ZnO nanocomposites exhibited better UV‐protection property than pure PET, especially in the range of UVA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface‐treated nanoparticles

In the present study two series of isotactic polypropylene (iPP)/SiO₂ nanocomposites containing 1, 2.5, 5, 7.5, and 10 wt % SiO₂ nanoparticles were prepared by melt‐mixing on a twin‐screw corotating extruder. In the first series untreated fumed silica nanoparticles were used, whereas in the second nanoparticles were surface‐treated with dimethyldichlorosilane. In both cases, the average size of the primary nanoparticles was 12 nm. Tensile and impact strength were found to increase and to be affected mainly by the type and content of silica nanoparticles. A maximum was observed, corresponding to samples containing 2.5 wt % SiO₂. These findings are discussed in light of the SEM and TEM observations. By increasing the amount of nanoparticles, large aggregates of fumed silica could be formed, which may explain the reduction of mechanical properties with higher concentrations of SiO₂. However, it was found that surface‐treated nanoparticles produced larger aggregates than did those derived from untreated nanoparticles, despite the increased adhesion of the iPP matrix, as was postulated from yield strength. This behavior negatively affected mechanical properties. In addition, an effort was made to determine if toughening theories, mainly the critical interparticle distance for rubber toughening or composites, also might be applicable in nanocomposites. From DSC measurements it was demonstrated that silica nanoparticles acted as effective nucleating agents, increasing the crystallization rate and the degree of crystallinity of iPP. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2684–2696, 2006     

A novel route for the synthesis of poly(2‐hydroxyethyl methacrylate) grafted TiO2 nanoparticles via surface thiol‐lactam initiated radical polymerization

Hybrid nanocomposites of poly(2‐hydroxyethyl methacrylate) (PHEMA) and TiO₂ nanoparticles were synthesized via surface thiol‐lactam initiated radical polymerization by following the grafting from strategy. Initially, TiO₂ nanoparticles were modified by 3‐mercaptopropyl trimethoxysilane to prepare thiol functionalized TiO₂ nanoparticles (TiO₂? SH). Subsequently, surface initiated polymerization of 2‐hydroxyethyl methacrylate was conducted by using TiO₂? SH and butyrolactam as an initiating system. The anchoring of PHEMA onto the surface of TiO₂ nanoparticles was investigated by FTIR, ¹H‐NMR, XPS, TGA, and XRD analyses. The experimental results indicated a strong interaction between PHEMA and TiO₂ nanoparticles owing to covalent bonding. The TEM and SEM images of PHEMA‐g‐TiO₂ showed that the agglomeration propensity of TiO₂ nanoparticles was significantly reduced upon the PHEMA functionalization. The molecular weight and polydispersity index of the cleaved PHEMA from the surface of TiO₂ nanocomposites were estimated by GPC analysis. An improved thermal property of the nanocomposites was observed from TGA analysis. PHEMA‐g‐TiO₂ nanocomposites were found to be highly dispersible in organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermal transitions and stability of melt mixed TiO2/Poly(L‐lactic acid) nanocomposites

Poly(L‐lactic acid) (PLLA) nanocomposites containing 5, 10, and 20 wt% titanium dioxide (TiO₂), were prepared by mixing in a co‐rotating twin‐screw extruder. By X‐ray diffraction, a transformation of less ordered (α’‐form) to better organized crystalline (α‐form) structure of PLLA was observed with increasing TiO₂ content. Differential scanning calorimetry (DSC) tests revealed that cold crystallization was facilitated, as shown by the decrease of cold crystallization temperature (T_cc). The main melting peak of PLLA phase in nanocomposites, shifted towards higher temperatures and a shoulder appeared in the lower temperature flank of the curve, revealing a second peak for 20/80 w/w TiO₂/PLLA nanocomposites. The effect of TiO₂ on the isothermal crystallization of PLLA, in the temperature range T_ic: 100–120°C, was also investigated by DSC. At lower temperatures (T_ic: 100 and 110°C), the effect of TiO₂ nanoparticles is an increase of the crystallization rate, leading to lower time for the completion of crystallization, in comparison with that of pure PLLA. The inverse effect was observed at higher crystallization temperatures (T_ic: 115 and 120°C). The kinetic analysis of the crystallization behavior of the examined nanocomposites fits the Avrami equation quite well and gives values for exponent (n) varying between 2 and 3, suggesting a spherulitic crystalline morphology. POLYM. ENG. SCI., 59:704–713, 2019. © 2018 Society of Plastics Engineers     

Tribological properties of bismaleimide composites with surface‐modified SiO2 nanoparticles

In this article, the surface of SiO₂ nanoparticles was modified by silane coupling agent N‐(2‐aminoethyl)‐γ‐aminopropylmethyl dimethoxy silane. The bismaleimide nanocomposites with surface‐modified SiO₂ nanoparticles or unmodified SiO₂ nanoparticles were prepared by the same casting method. The tribological performance of the nanocomposites was studied on an M‐200 friction and wear tester. The results indicated that the addition of SiO₂ nanoparticles could decrease the frictional coefficient and the wear rate of the composites. The nanocomposites with surface‐modified SiO₂ nanoparticles showed better wear resistance and lower frictional coefficient than that with the unmodified nanoparticles SiO₂. The specific wear rate and the steady frictional coefficient of the composite with 1.0 wt % surface‐modified SiO₂ nanoparticles are only 1.8 × 10^?6 mm³/N m and 0.21, respectively. The dispersion of surface‐modified SiO₂ nanoparticles in resin matrix was observed with transmission electron microscope, and the worn surfaces of pure resin matrix and the nanocomposites were observed with scanning electron microscope. The different tribological behavior of the resin matrix and the filled composites should be dependent on their different mechanical properties and wear mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Coincorporation of nano‐silica and nano‐calcium carbonate in polypropylene

In this study, various polypropylene (PP) nanocomposites were prepared by melt blending method. The effects of different spherical nanofillers, such as 50 nm CaCO₃ and 20 nm SiO₂, on the linear viscoelastic property, crystallization behavior, morphology and mechanical property of the resulting PP nanocomposites were examined. Rheological study indicated that coincorporation of nano‐SiO₂ and nano‐CaCO₃ favored the uniform dispersion of nanoparticles in the PP matrix. Differential scanning calorimeter (DSC) and polarizing optical microscopy (POM) studies revealed that the coincorporation of SiO₂ and CaCO₃ nanoparticles could effectively improve PP crystallizability, which gave rise to a lower supercooling temperature (ΔT), a shorter crystallization half‐life (t_1/2) and a smaller spherulite size in comparison with those nanocomposites incorporating only one type of CaCO₃ or SiO₂ nanoparticles. The mechanical analysis results also showed that addition of two types of nanoparticles into PP matrix gave rise to enhanced performance than the nanocomposites containing CaCO₃ or SiO₂ individually. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of POSS‐grafted titanium dioxide on the electrical and thermal properties of LDPE/TiO2 polymer nanocomposite

Two types of nanocomposites have been fabricated by a ball‐milling technique. The first type consists of untreated titanium dioxide (TiO₂) incorporated into low‐density polyethylene (LDPE). For the second one, TiO₂ filler chemically treated with trisilanol phenyl–polyhedral oligomeric silsesquioxane (TP–POSS) as compatibilizing agent was ball‐milled with LDPE. All specimens were tested by microstructure analysis and thermal, dielectric characterization techniques. Microstructure analysis by atomic force microscopy and scanning electron microscopy show clearly an increased dispersion in presence of POSS. Scanning electron microscopy even shows the formation of a particular structure due possibly to interactions between functionalization. It was observed that the modification of the surface of TiO₂ by the POSS decreased the dielectric loss. All nanocomposites containing treated TiO₂ revealed an improvement in thermal conductivity, with the most distinct value of 19% in case of LDPE containing 5 wt % treated TiO₂. The incorporation of TiO₂ fillers seems to reduce the dielectric breakdown strength of the nanocomposites. However, nanocomposites containing 3 and 5 wt % treated TiO₂ have exhibited a slightly enhancement in dielectric breakdown strength up to 5%. The improvement in surface resistance to partial discharge was found in all nanocomposites specimens, especially for both types of composite containing 7 wt % untreated and treated TiO₂. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46095.     

Anionic nylon 6/TiO2 composite materials: Effects of TiO2 filler on the thermal and mechanical behavior of the composites

The nylon 6‐based composite materials containing untreated and surface‐treated TiO₂ particles with 3‐aminopropyltriethoxysilane (APTEOS), as coupling agent were prepared by in situ anionic polymerization of ε‐caprolactam in the presence TiO₂ as a filler using the rotational molding technique. The thermal behavior and mechanical properties of the neat nylon 6 and its composites were investigated using various techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), a tensile and flexural test and impact strength. Experimental results revealed that both untreated and surface‐modified TiO₂ had distinct influence on the melting temperature (T_m), crystallization temperature (T_c), and degree of crystallinity (α_DSC), thermal stability, storage modulus (E′), and loss factor (tan δ), and mechanical properties of nylon 6 matrix. Dynamical mechanical analysis indicated that addition of TiO₂ particles into nylon 6 matrix increased both the storage modulus and the glass transition temperature. The corresponding values of nylon 6 composites with modified filler were higher than that of nylon 6 composite with untreated TiO₂ particles. Tensile and flexural characteristics of the nylon 6 composites were found to increase while the elongation at break and impact strength with increase in TiO₂ concentration relative to neat nylon 6. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Isothermal crystallization and melting behaviors of nano TiO2‐modified polypropylene/polyamide 6 blends

Titanium dioxide (TiO₂) nanoparticles were functionalized with toluene‐2,4‐diisocyanate and then polypropylene/polyamide 6/(PP/PA6) blends containing functionalized‐TiO₂ were prepared using a twin screw extruder. Isothermal crystallization and melting behavior of the as‐prepared composites were investigated using differential scanning calorimetry and wide‐angle X‐ray diffraction. Isothermal crystallization analysis shows that the TiO₂ nanoparticles have two effects on PP/PA6 blends, i.e., it can favor the improvement of crystallization ability and decrease the crystallization rate of PP/PA6 blends. The improvement of crystallization ability is superior over decreasement of crystallization rate of PA6 chains caused by TiO₂, therefore PA6 in PP/PA6/TiO₂ nanocomposites have higher crystallization rate than that of PA6 in pure PP/PA6 blends, which indicated TiO₂ nanoparticles favored the crystallization of PA6. The TiO₂ nanoparticles show no effects on the equilibrium melting temperature (T) values of PP phase but decreases the T values of PA6 phase. In addition, the TiO₂ nanoparticles did not change the crystalline polymorph of PP/PA6 blends basically; however, favored the formation of β‐PP. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Effect of SiO2 and TiO2 nanoparticle on the properties of phenyl silicone rubber

Two types of nanoparticles TiO₂ and SiO₂ treated with silane coupling agents were incorporated into phenyl silicone rubber at a low concentration (≤1.0%) and cured by the room temperature vulcanized method. The results showed that treated TiO₂ or SiO₂ nanoparticles improved the ultraviolet (UV)‐shielding ability and enhanced the visible transmittance of the phenyl silicone rubber, compared with their respective untreated particles. Moreover, when comparing treated nanoparticles, TiO₂ was more responsible for augmenting the UV‐shielding ability of the phenyl silicone rubber, while SiO₂ played a more important role in increasing the transmittance of visible light. Low levels of nanoparticles reduced the dielectric constant of the nanocomposite; however, on reaching a critical concentration, increasing the nanoparticle content had the opposite effect. The thermal conductivity of nanocomposites increased linearly with the amount of treated nanoparticles, while SiO₂ nanocomposites exhibited better thermal conductivity than those of TiO₂. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42806.     

Non-isothermal crystallization kinetics of TiO2 nanoparticle-filled poly(ethylene terephthalate) with structural and chemical properties

The present research work includes non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET)–titanium dioxide (TiO₂) nanocomposites as well as structural and chemical properties of these nanocomposites. The average grain size of chemically synthesized TiO₂ nanoparticles has been calculated 19.31 nm by TEM and XRD. The morphology and structural analysis of PET–TiO₂ nanocomposites, prepared via solution casting method, has been investigated using SEM and XRD, respectively. The nature of chemical bonds has been discussed on the basis of FTIR spectra. The effect of TiO₂ nanoparticles and cooling rates on non-isothermal crystallization kinetics of PET was examined by differential scanning calorimetry at various heating and cooling rates. It has been observed that TiO₂ nanoparticles accelerate the heterogeneous nucleation in PET matrix. The crystallization kinetics could be explained through Avrami–Ozawa combined theory. TiO₂ nanoparticles cause to make molecular chains of PET easier to crystallize and accelerate the crystallization rates during non-isothermal crystallization process; this conclusion has also been verified by Kissinger model for crystallization activation energy.     

PMMA‐grafted‐silica/PVC nanocomposites: Mechanical performance and barrier properties

Poly(vinyl chloride) (PVC)/SiO₂ nanocomposites were prepared via melt mixture using a twin‐screw mixing method. To improve the dispersion degree of the nanoparticles and endow the compatibility between polymeric matrix and nanosilica, SiO₂ surface was grafted with polymethyl methacrylate (PMMA). The interfacial adhesion was enhanced with filling the resulting PMMA‐grafted‐SiO₂ hybrid nanoparticles characterized by scanning electron microscopy. Both storage modulus and glass transition temperature of prepared nanocomposites measured by dynamic mechanical thermal analysis were increased compared with untreated nanosilica‐treated PVC composite. A much more efficient transfer of stresses was permitted from the polymer matrix to the hybrid silica nanoparticles. The filling of the hybrid nanoparticles caused the improved mechanical properties (tensile strength, notched impact strength, and rigidity) when the filler content was not more than 3 wt %. Permeability rates of O₂ and H₂O through films of PMMA‐grafted‐SiO₂/PVC were also measured. Lower rates were observed when compared with that of neat PVC. This was attributed to the more tortuous path which must be covered by the gas molecules, since SiO₂ nanoparticles are considered impenetrable by gas molecules. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Isothermal crystallization kinetics and melting behaviors of nanocomposites of poly(trimethylene terephthalate) filled with nano‐CaCO3

The isothermal crystallization and subsequent melting behavior of poly(trimethylene terephthalate) (PTT) composites filled with nano‐CaCO₃ were investigated at designated temperatures with differential scanning calorimetry. The Avrami equation was used to fit the isothermal crystallization. The Avrami exponents were determined to be 2–3 for the neat PTT and PTT/CaCO₃ composites. The particles of nano‐CaCO₃, acting as nucleating agents in the composites, accelerated the crystallization rate, with the half‐time of crystallization decreasing or the growth rate constant (involving both nucleation and growth rate parameters) increasing. The crystallization activation energy calculated from the Arrhenius formula was reduced as the nano‐CaCO₃ content increased from 0 to 2%, and this suggested that nano‐CaCO₃ made the molecular chains of PTT easier to crystallize during the isothermal crystallization process. Subsequent melting scans of the isothermally crystallized composites exhibited triple or double melting endotherms: the greater the content was of nano‐CaCO₃, the lower the temperature was of the melting peak. The degree of crystallization deduced from the melt enthalpy of composites with the proper concentration of nano‐CaCO₃ was higher than that of pure PTT, but it was lower when the nano‐CaCO₃ concentration was more than 2%. The transmission electron microscopy pictures suggested that the dispersion state of nano‐CaCO₃ particles in the polymer matrix was even when its concentration was no more than 2%, whereas some agglomeration occurred when its concentration was 4%. Polarized microscopy pictures showed that much smaller or less perfect crystals formed in the composites because of the interaction between the molecular chains and nano‐CaCO₃ particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Thermal stability of HCl‐doped‐polyaniline and TiO2 nanoparticles‐based nanocomposites

Electrically conductive HCl doped polyaniline (Pani) : titanium dioxide (TiO₂) nanocomposites thin films were prepared by in‐situ oxidative polymerization of aniline in the presence of different amounts of TiO₂ nanoparticles. Later film casting was done using N‐Methyl‐2‐pyrrolidone (NMP) as a solvent. The formation of Pani : TiO₂ nanocomposites were characterized by Fourier Transform Infra‐Red spectroscopy (FTIR), x‐ray diffraction (XRD) and thermogravimetric analysis (TGA). The stability of the nanocomposites in terms of direct‐current electrical conductivity retention was studied in air by isothermal and cyclic techniques. The films of Pani : TiO₂ nanocomposites were observed thermally more stable under ambient environmental conditions than pure polyaniline film. The stability was seen to be highly dependent on the content of TiO₂ nanoparticles in the nanocomposite films. Due to their high stability, such type of nanocomposites can find place as a replacement material for pure polyaniline in electrical and electronic devices. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nonisothermal crystallization behavior of melt‐intercalated polyethylene‐clay nanocomposites

The influence of nanoclay particles on the nonisothermal crystallization behavior of intercalated polyethylene (PE) prepared by melt‐compounding was investigated. It is observed that the crystallization peak temperature (T_p) of PE/clay nanocomposites is slightly but consistently higher than the neat PE at various cooling rates. The half‐time (t_0.5) for crystallization decreased with increase in clay content, implying the nucleating role of nanoclay particles. The nonisothermal crystallization data are analyzed using the approach of Avrami (Polymer 1971, 12, 150), Ozawa (Polym Eng Sci 1997, 37, 443), and Mo and coworkers (J Res Natl Bur Stand 1956, 57, 217), and the validity of the different kinetic models to the nonisothermal crystallization process of PE/clay nanocomposites is discussed. The approach developed by Mo and coworkers successfully explains the nonisothermal crystallization behavior of PE and PE/clay nanocomposites. The activation energy for nonisothermal crystallization of neat PE and PE/clay nanocomposites is determined using the Kissinger (J Res Natl Bur Stand 1956, 57, 217) method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3809–3818, 2006     

Nonisothermal crystallization behavior and crystals morphology of poly(trimethylene terephthalate)/nano‐calcium carbonate composites

Nonisothermal crystallization behavior and crystal morphology of poly(trimethylene terephthalate) (PTT) composites filled with modified nano‐calcium carbonate (CaCO₃) had been investigated by using differential scanning calorimetry and polarized optical microscopy. The modified Avrami equation and Ozawa theory were used to investigate the nonisothermal crystallization, respectively. The particles of nano‐CaCO₃, acting as a nucleation agent in composites, accelerated the crystallization rate by decreasing the half‐time of crystallization or increasing the parameters of Z_c and K(T). Moreover, the nano‐composite with 2 wt% nano‐CaCO₃ exhibited the highest crystallization rate. The Avrami and the Ozawa exponents, n and m of the nano‐composites, were higher than those of neat PTT, suggesting more complicated interaction between molecular chains and the nanoparticles that cause the changes of the nucleation mode and the crystal growth dimension. The effective activation energy calculated from the Friedman formula was reduced as nano‐CaCO₃ content increased, suggesting that the nano‐CaCO₃ made the molecular chains of PTT easier to crystallize during the nonisothermal crystallization process. The optical micrographs showed that much smaller or less perfect crystals were formed in composites because of the presence of the nano‐CaCO₃ particles. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers