Synthesis and antimicrobial activity of biocidal polymer–montmorillonite nanocomposites

The bioactive agents p‐hydroxymethylbenzoate, 2,4‐dihydroxymethylbenzoate and methylsalicylate were reacted with polyoxyalkylene (D_230–2000)–montmorillonite (MMT) intercalated nanocomposites. D_230–2000–MMT were prepared by an ion exchange process of Na‐MMT and? NH₃⁺ groups in polyoxyalkylene amine hydrochloride of three different molecular masses (D₂₃₀, D₄₀₀ and D₂₀₀₀). The results of X‐ray analysis and transmission electron microscopy show that D₂₀₀₀–MMT/p‐hydroxymethylbenzoate is an exfoliated nanocomposite, whereas in D₂₃₀–MMT/p‐hydroxymethylbenzoate, D₂₃₀–MMT/2,4‐dihydroxymethylbenzoate, D₂₃₀–MMT/methylsalicylate and D₄₀₀–MMT/p‐hydroxymethylbenzoate, having lower molecular mass and polymer loading, the MMT rearranges in an intercalated and flocculated structure. The amount of intercalated polymer and interaction between polymer and layered silicate were determined using thermogravimetric analysis and Infrared spectroscopy. The antimicrobial activities of the nanocomposites were qualitatively and quantitatively assessed by agar diffusion tests and minimal inhibitory concentration values against a Gram‐negative bacterium (Escherichia coli NCIM 2065), a Gram‐positive bacterium (Bacillus subtilis ATCC) and fungi (Candida albicans SC5314 and Cryptococcus neoformans). The D₂₀₀₀–MMT/p‐hydroxymethylbenzoate nanocomposite strongly inhibits the growth of all the micro‐organisms tested. The diameter of the inhibition zone varies according to the type of micro‐organism tested. The effect of nanocomposite concentration on morphology, respiration and release of calcium, potassium and sodium ions of the test micro‐organisms was examined. Copyright © 2011 Society of Chemical Industry     

Polyaniline–organoclay nanocomposites as curing agent for epoxy: Preparation and characterization

Polyaniline (PANI)–organoclay/Epoxy (EP) nanocomposites were prepared. PANI–organoclay nanocomposites were used as curing agent for EP. Organoclay was prepared by an ion exchange process between sodium cations in MMT and NH₃⁺ groups in polyoxypropylene (D₂₃₀). PANI–organoclay nanocomposite was synthesized by in situ polymerization of aniline in (14 wt%) organoclay. Infrared spectra and differential scanning calorimetry confirm the curing of EP. The absence of d₀₀₁ diffraction band of organoclay in the nanocomposites was observed by X‐ray diffraction. The structure argument was further supported by scanning electron microscopy and transmission electron microscopy. Electrical conductivity of the nanocomposites within the range 2.1 × 10⁻⁷–3.2 × 10⁻⁷ S/cm depending on the concentration of the PANI/D₂₃₀‐MMT. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Synthesis and characterization of polyaniline–organoclay nanocomposites

Polyaniline (PANI)–organoclay nanocomposites were prepared. Intercalation of aniline monomer into montmorillonite (MMT) modified by polyoxyalkylene was followed by subsequent oxidative polymerization of the aniline in the interlayer spacing. The organoclay was prepared by cation exchange process between sodium cation in MMT and onium ion in four different types of polyoxyalkylene diamine and triamine with different molecular weight. Infrared spectra confirm the electrostatic interaction between the positively charged onium group (NH₃⁺) and the negatively charged surface of MMT. X‐ray diffraction analysis provides a structural information. The absence of d₀₀₁ diffraction band in the nanocomposites was observed at certain types and contents of organoclay. Scanning electron microscopy and transmission electron microscopy were employed to determine the dispersion of the clay into PANI. The thermal degradation behavior of PANI in the nanocomposites has been investigated by thermogravimetric analysis. The weight loss suggests that the PANI chains in the nanocomposites are more thermally stable than pristine PANI. This improvement is attributed to the presence of nanolayers with high aspect ratio acting as barriers, thus shielding the diffusion of degraded PANI from the nanocomposites. The electrical conductivity of the nanocomposites was increased 30 times more than that of pure MMT at a certain concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of polyurethane/organo-montmorillonite nanocomposites

Polyurethane (PU)/organo-montmorillonite nanocomposites were prepared by in situ polymerization of toluene diisocyanate and butanediol in the presence of different contents of organo-montmorillonite (9–18 mass%). Organo-montmorillonite were prepared by an ion exchange process of sodium montmorillonite with –NH₃⁺ groups in polyoxyalkylene amine hydrochloride with two different molecular masses of 403 and 5000. To change the degree of surface modification, sodium montmorillonite was reacted with polyoxyalkylene amine hydrochloride in equivalent ratios (1:1 and 1:2). Dimethyl formamide (DMF) was used as a swelling agent for the prepared organo-montmorillonite. Different nanocomposite structures, depending on the molecular mass of the polyoxyalkylene and the degree of surface modification of montmorillonite were studied. The results of X-ray analysis and transmission electron microscopy showed that the organo-montmorillonite with polyoxyalkylene of higher molecular mass (T₅₀₀₀) produced the exfoliated PU nanocomposites; (T₄₀₃), led to an intercalated structure. Nanocomposites exhibited lower water adsorption values and higher thermal stability than that of pure PU₀. In addition, the hardness of the nanocomposites was measured.     

Polylactide/transition metal ion modified montmorillonite nanocomposite—a critical evaluation of mechanical performance and thermal stability

Polylactide (PLA) nanocomposite was prepared by melt blending of PLA and transition metal ion (TMI) adsorbed montmorillonite (MMT). PLA nanocomposite was characterized for mechanical performance, and the results revealed that the tensile modulus, flexural modulus, and impact strength were increased marginally. The nanocomposite was optimized at 5 wt% of TMI‐modified MMT (TMI‐MMT) loading. Thermogravimetric analysis displayed increase in onset of degradation temperature, and differential scanning calorimetry showed marginal increase in glass transition temperature (T_g) and melting temperature (T_m) in case of PLA nanocomposites, when compared with virgin PLA. The flammability testing of nanocomposites indicated good fire retardance characters. X‐ray diffraction patterns of TMI‐MMT and the corresponding nanocomposites indicated an intercalation of the metal ions into the clay interlayer. Fourier transform infrared spectroscopy analysis indicate formation of [Zn(EDA)₂]²⁺ and [Cu(EDA)₂]²⁺ complexes in the MMT interlayer. Dynamic mechanical analysis shows increase in glass transition temperature (T_g) and storage modulus (E′) in case of PLA nanocomposites reinforced with 5 wt% modified MMT. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Nonisothermal crystallization kinetics of polyoxymethylene/montmorillonite nanocomposite

The nonisothermal crystallization kinetics of polyoxymethylene (POM), polyoxymethylene/Na–montmorillonite (POM/Na–MMT), and polyoxymethylene/organic–montmorillonite (POM/organ–MMT) nanocomposites were investigated by differential scanning calorimetry at various cooling rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the nonisothermal crystallization process of POM/Na–MMT and POM/organ–MMT nanocomposites. The difference in the values of the exponent n between POM and POM/montmorillonite nanocomposites suggests that the nonisothermal crystallization of POM/Na–MMT and POM/organ–MMT nanocomposites corresponds to a tridimensional growth with heterogeneous nucleation. The values of half‐time and the parameter Z_c, which characterizes the kinetics of nonisothermal crystallization, show that the crystallization rate of either POM/Na–MMT or POM/organ–MMT nanocomposite is faster than that of virgin POM at a given cooling rate. The activation energies were evaluated by the Kissinger method and were 387.0, 330.3, and 328.6 kJ/mol for the nonisothermal crystallization of POM, POM/Na–MMT nanocomposite, and POM/organ–MMT nanocomposite, respectively. POM/montmorillonite nanocomposite can be as easily fabricated as the original polyoxymethylene, considering that the addition of montmorillonite, either Na–montmorillonite or organ–montmorillonite, may accelerate the overall nonisothermal crystallization process. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2281–2289, 2001     

Electrical conductivity behavior of epoxy matrix nanocomposites with simultaneous dispersion of carbon nanotubes and clays

In this work, nanocomposites with simultaneous dispersion of multiwalled carbon nanotubes (MWCNT) and montmorillonite clays in an epoxy matrix were prepared by in situ polymerization. A high energy sonication was employed as the dispersion method, without the aid of solvents in the process. The simultaneous dispersion of clays with carbon nanotubes (CNT) in different polymeric matrices has shown a synergic potential of increasing mechanical properties and electrical conductivity. Two different montmorillonite clays were used: a natural (MMT‐Na⁺) and an organoclay (MMT‐30B). The nanocomposites had their electrical conductivity (σ) and dielectric constant (ε_r) measured by impedance spectroscopy. The sharp increase in electrical conductivity was found between 0.10 and 0.25 wt% of the MWCNTs. Transmission electron microscopy (TEM) of the samples showed a lower tendency of MWCNT segregation on the MMT‐30B clay surface, which is connected to intercalation/exfoliation in the matrix, that generates less free volume available for MWCNTs in the epoxy matrix. Data from electrical measurement showed that simultaneously adding organoclay reduces the electrical conduction in the nanocomposite. Moreover, conductivity and permittivity dispersion in low frequency suggest agglomeration of nanotubes surrounding the natural clay (MMT‐Na⁺) particles, which is confirmed by TEM. POLYM. COMPOS., 37:1603–1611, 2016. © 2014 Society of Plastics Engineers     

Synthesis of Na+‐montmorillonite/amphiphilic polyurethane nanocomposite via bulk and coalescence emulsion polymerization

Polyurethane/clay nanocomposites have been synthesized using Na⁺‐montmorillonite (Na⁺‐MMT)/amphiphilic urethane precursor (APU) chains that have hydrophilic polyethylene oxide (PEO) chains and hydrophobic segments at the same molecules. Nanocomposites were synthesized through two different crosslinking polymerization methods. One is UV curing of melt mixed APU/Na⁺‐MMT mixtures; the other is coalescence polymerization of APU/Na⁺‐MMT emulsions. These two kinds of composites had intercalated silicate layers of Na⁺‐montmorillonite by insertion of PEO chains in APU chains, which was confirmed by X‐ray diffraction measurement and transmission electron microscopy. These composite films also showed improved mechanical properties compared to pristine APU films. Although the two kinds of nanocomposites exhibited the same degree of intercalation and were synthesized based on the same precursor chains, these nanocomposite films had the different mechanical properties. Nanocomposites synthesized using APU/Na⁺‐MMT emulsions, having microphase‐separated structure, had greater tensile strength than those prepared with melt‐mixed APU/Na⁺‐MMT mixtures. Location of intercalated Na⁺‐MMT by PEO chains at the oil–water interface also could be confirmed by rheological behavior of the APU/Na⁺‐MMT/water mixture. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3130–3136, 2003     

Preparation and characterization of transparent poly(methyl methacrylate)/Na+‐MMT nanocomposite films by solution casting

Films of poly(methyl methacrylate) (PMMA)/sodium montmorillonite (Na⁺‐MMT) nanocomposites have been successfully prepared utilizing Na⁺‐MMT by N,N‐dimethylformamide solution casting. The nanocomposite films show high transparency, enhanced thermal resistance, and mechanical properties in comparison with the neat polymer film. The transparency of the films was investigated by UV‐vis spectra. The exfoliated dispersion of Na⁺‐MMT platelets in nanocomposites were investigated by X‐ray diffraction and transmission electron microscopy. The enhanced thermal resistance and mechanical properties of PMMA were studied by thermal gravimetric analysis and dynamic mechanical analysis, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel organic modification of montmorillonite in hydrocarbon solvent using ionic liquid‐type surfactant for the preparation of polyolefin–clay nanocomposites

The possibility of organic modification of montmorillonite (MMT) in hydrocarbon solvents by employing ionic liquid‐type surfactants was investigated. As a first example, 1‐methyl‐3‐tetradecylimidazolium chloride ([C₁₄mim]⁺Cl^?) was used to treat pristine MMT in xylene. The dispersion of MMT in xylene was significantly improved, the collected organifically modified MMT displayed a sufficiently enlarged interlayer spacing. The novel art of MMT organic modification is specifically advantageous to the preparation of polyolefin‐based nanocomposites. A polypropylene/MMT nanocomposite was exemplarily prepared by directly dissolving polypropylene in the MMT modification system and found to possess an excellent thermal stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4314–4320, 2006     

Poly(vinyl alcohol) nanocomposites with different clays: Pristine clays and organoclays

Poly(vinyl alcohol) (PVA)/clay nanocomposites were synthesized using the solution intercalation method. Na ion‐exchanged clays [Na⁺–saponite (SPT) and Na⁺–montmorillonite (MMT)] and alkyl ammonium ion‐exchanged clays (C₁₂–MMT and C₁₂OOH–MMT) were used for the PVA nanocomposites. From the morphological studies, the Na ion‐exchanged clay is more easily dispersed in a PVA matrix than is the alkyl ammonium ion‐exchanged clay. Attempts were also made to improve both the thermal stabilities and the tensile properties of PVA/clay nanocomposite films, and it was found that the addition of only a small amount of clay was sufficient for that purpose. Both the ultimate tensile strength and the initial modulus for the nanocomposites increased gradually with clay loading up to 8 wt %. In C₁₂OOH–MMT, the maximum enhancement of the ultimate tensile strength and the initial modulus for the nanocomposites was observed for blends containing 6 wt % organoclay. Na ion‐exchanged clays have higher tensile strengths than those of organic alkyl‐exchanged clays in PVA nanocomposites films. On the other hand, organic alkyl‐exchanged clays have initial moduli that are better than those of Na ion‐exchanged clays. Overall, the content of clay particles in the polymer matrix affect both the thermal stability and the tensile properties of the polymer/clay nanocomposites. However, a change in thermal stability with clay was not significant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3208–3214, 2003     

Enhancing antibacterial properties of polypropylene/Cu‐loaded montmorillonite nanocomposite filaments through sheath–core morphology

Polypropylene (PP) loaded with copper‐exchanged montmorillonite (Cu‐MMT) nanocomposite filaments and films with excellent antimicrobial activity have been reported for the first time. A sheath–core morphology filament in which only the sheath contains Cu‐MMT was prepared for maximizing bioactivity. Sodium MMT clay was modified to acid‐activated MMT and further to Cu‐MMT via an ion exchange process. The exchange operation was confirmed using wide‐angle X‐ray diffraction and energy‐dispersive X‐ray spectroscopy (EDX) which suggested increased interlayer spacing and confirmed the loading of copper in Cu‐MMT. Further, Cu‐MMT was melt‐mixed in PP in the form of PP/Cu‐MMT nanocomposite filament, film and sheath–core morphology PP/Cu‐MMT nanocomposite filament. The surface morphology and elemental composition of the nanocomposites were studied using scanning electron microscopy coupled with EDX. Transmission electron micrographs were obtained to understand the dispersion characteristics of Cu‐MMT phase in PP. X‐ray diffraction analysis of nanocomposites suggested increased crystallinity at lower loading due to heterogeneous nucleating action of MMT. The PP nanocomposite filaments and films were tested for antimicrobial activity against Gram‐negative bacterium Escherichia coli, which is the main pathogenic bacterium found abundantly in water, and were found to exhibit excellent antimicrobial activity. © 2018 Society of Chemical Industry     

Effect of polymer matrix/montmorillonite compatibility on morphology and melt rheology of polypropylene nanocomposites

In this study, Ca²⁺‐montmorillonite (Ca²⁺‐MMT) and organo‐montmorillonite (OMMT) were modified by three compatibilizers with different degrees of polarity [poly(ethylene glycol) (PEG), alkyl‐PEG, and polypropylene (PP)‐g‐PEG]. PP/MMT nanocomposites were prepared by melt blending and characterized using X‐ray diffraction and transmission electron microscopy. The results showed the degree of dispersion of OMMT in the PP/PP‐g‐PEG/OMMT (PMOM) nanocomposite was considerably higher than those in the PP/PEG/OMMT and PP/alkyl‐PEG/OMMT nanocomposites, which indicated that the dispersion was relative to the compatibility between modified OMMT and PP matrix. Linear viscoelasticity of PP/MMT nanocomposites in melt states was investigated by small amplitude dynamic rheology measurements. With the addition of the modified MMT, the shear viscosities and storage modulus of all the PP/MMT nanocomposites decreased. It can be attributed to the plasticization effect of PEG segments in the three modifiers. This rheological behavior was different from most surfactant modified MMT nanocomposites which typically showed an increase in dynamic modulus and viscosity relative to the polymer matrix. The unusual rheological observations were explained in terms of the compatibility between the polymer matrix and MMT. In addition, the mechanical properties of PP/MMT nanocomposites were improved. A simultaneous increase in the tensile strength and toughness was observed in PP/PMOM nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and properties of PET/PA6 copolymer/montmorillonite hybrid nanocomposite

From in situ polycondensation, a poly(ethylene terephthalate)/Polyamide 6 copolymer/montmorillonite nanocomposite was prepared, after the treatment of montmorillonite (MMT) with a water soluble polymer. The resulting nanocomposites were characterized by X‐ray diffraction (XRD), differential scanning calorimeter (DSC), nuclear magnetic resonance (NMR), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). The results of DSC, ¹H NMR, and DMA proved that the nanocomposite synthesized was PET/PA6 copolymer/MMT nanocomposite, not the PET/PA6 blend/MMT nanocomposite. The results of XRD and TEM proved that the dispersion of MMT was improved observably after the introduction of PA6 molecular chain into PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2512–2517, 2006     

Tri‐ammonium end functional polyethylene: facile synthesis and application as an intercalation agent

Organo‐modification of montmorillonite (MMT) is crucial for the promotion of a fine dispersion of MMT into an (often hydrophobic) polymer matrix. Ammonium‐terminated polymers are more efficient in modifying clay compared to small organic cations such as alkyl ammoniums or side functionalized polymers. Herein, tri‐amino end functional polyethylene (PE‐3 N) with low molecular weight was first synthesized via an efficient and robust epoxide ring‐opening reaction by treating epoxide‐terminated PE with diethylenetriamine. The chemical structure of PE‐3 N was unambitiously characterized by chromatographic and spectral methods. By reacting with excess HCl, PE‐3 N was subsequently converted to tri‐ammonium end functional polyethylene (PE‐3 N⁺), which serves as an intercalation agent of MMT. By adjusting the weight ratio of PE‐3 N⁺ to pristine MMT (R_P/M) applied in the static melt intercalation process, correlations between the extent of exfoliation and R_P/M were successfully established. XRD results revealed that complete exfoliation of MMT could be afforded with R_P/M as low as 1, which is the lowest value ever reported for ammonium‐terminated polymers applied as intercalation agents. SEM micrographs showed that MMT sheets were swollen by PE‐3 N⁺, affirming the successful modification of MMT. The PE modified MMT obtained may find application in preparing high‐performance PE/MMT nanocomposites. © 2017 Society of Chemical Industry     

Intercalated clay structures and amorphous behavior of solution cast and melt pressed poly(ethylene oxide)–clay nanocomposites

The polymer nanocomposite (PNC) films consisted of poly(ethylene oxide) (PEO) and sodium cations montmorillonite (MMT) clay were prepared by aqueous solution casting and direct melt press compounding techniques, whereas the films of PEO with trimethyl octadecyl ammonium cations organo‐modified montmorillonite (OMMT) clay were formed by melt pressed technique. The clay concentrations in the nanocomposites used are 1, 2, 3, 5, 10, and 20 wt % of the PEO weight. The X‐ray diffraction patterns of these nanocomposites were measured in the angular range (2θ) of 3.8–30°. The values of basal spacing d₀₀₁ of MMT/OMMT, clay gallery width W_cg, d‐spacings of PEO crystal reflections d₁₂₀ and d₁₁₂, and their corresponding crystallite size L, and the peaks intensity I (counts) were determined for these nanocomposites. Results reveal that the nanocomposites have intercalated clay structures and the amount of intercalation increases with the increase of clay concentration. As compared to melt pressed PEO–MMT nanocomposites, the amount of clay intercalation is higher in aqueous solution cast nanocomposites. At 20 wt % MMT dispersion in PEO matrix, the solution cast PEO–MMT nanocomposite almost changes into amorphous phase. The melt press compounded PEO–OMMT films show more intercalation as compared to the PEO–MMT nanocomposites prepared by same technique. In melt pressed nanocomposites, the PEO crystalline phase significantly reduces when clay concentration exceeds 3 wt %, which is evidenced by the decrease in relative intensity of PEO principal crystalline peaks. The effect of interactions between the functional group (ethylene oxide) of PEO and layered sheets of clay on both the main crystalline peaks of PEO was separately analyzed using their XRD parameters in relation to structural conformations of these nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39898.     

Improving heat ageing and thermal properties of silicone rubber using montmorillonite clay

Heat ageing and thermal stability of a silicone rubber (SR) filled with montmorillonite clay (MMT) was investigated. Three types of rubber nanocomposites were prepared with highly exfoliated Cloisite 30B (SR/C30B), intercalated/exfoliated Cloisite Na⁺ (SR/Na⁺MMT), and highly intercalated Cloisite 20A (SR/C20A). This study showed that the SR/C30B nanocomposite exhibited excellent heat resistance in comparison to the other two nanocomposites and neat SR as revealed by higher retention strength. The thermal stability of the rubber in air was strongly dependent on the clay morphology and increased in the following order: highly intercalated/exfoliated SR/Na⁺MMT < highly intercalated SR/C20A < highly exfoliated SR/C30B. The thermogravimetric analyses of the SR/C30B nanocomposite showed a substantial increase in the final residue in comparison with the neat SR. This indicated a major improvement in the thermal stability of the rubber containing the exfoliated clay, which was also supported by the higher activation energy of decomposition measured for the nanocomposite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41061.     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Novel polyether polyurethane/clay nanocomposites synthesized with organicly modified montmorillonite as chain extenders

A kind of novel polyether polyurethane (PU)/clay nanocomposite was synthesized using poly(tetramethylene glycol), 4,4′‐diphenylmethane diisocyanate (MDI), 1,6‐hexamethylenediamine, and modified Na⁺‐montmorillonite (MMT). Here, organicly modified MMT (O‐MMT) was formed by applying 1,6‐hexamethylenediamine as a swelling agent to treat the Na⁺‐MMT. The X‐ray analysis showed that exfoliation occurred for the higher O‐MMT content (40 wt %) in the polymer matrix. The mechanical analysis indicated that, when the O‐MMT was used as a chain extender to replace a part of the 1,2‐diaminopropane to form PU/clay nanocomposites, the strength and strain at break of the polymer was enhanced when increasing the content of O‐MMT in the matrix. When the O‐MMT content reached about 5%, the tensile strength and elongation at break were over 2 times that of the pure PU. The thermal stability and the glass transition of the O‐MMT/PU nanocomposites also increased with increasing O‐MMT content. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 6–13, 2006     

Effect of shear rate on structural,mechanical, and barrier properties of chitosan/montmorillonite nanocomposite film

The dispersion of MMT‐Na⁺ (montmorillonite) layers in a chitosan polymer matrix, using the homogenization, was performed. The effect of shear rate was characterized on the mechanical, barrier, and structural properties of nanocomposites. Elongation at break (EAB) was unaffected by shear rate, which decreased after homogenization, increased above 13,000 rpm, however, tensile strength (TS) dramatically increased up to 59 MPa at 16,000 rpm. Water vapor permeability (WVP) and oxygen permeability (OP) of the homogenized nanocomposite decreased more than that of untreated nanocomposite and OP was not significantly changed above 16,000 rpm of shear rate. XRD result and TEM images indicated that three types of tactoids, exfoliation, and intercalation were generated and the largest distance of 18.87 Å between MMT‐Na⁺ layers was produced at 16,000 rpm. The results indicate that homogenization was a beneficial method for effectively dispersing MMT‐Na⁺ layers in a chitosan polymer matrix and that a shear rate of 16,000 rpm was the effective condition. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011