Improved‐Performance Dye‐Sensitized Solar Cells Using Nb‐Doped TiO2 Electrodes: Efficient Electron Injection and Transfer

Well‐crystallized Nb‐doped anatase TiO₂ nanoparticles are prepared by a novel synthetic route and successfully used as the photoanode of dye‐sensitized solar cells (DSSCs). The homogenous distribution of Nb in the TiO₂ lattice is confirmed by scanning transmission electron microscopy (STEM) elemental mapping and line‐scanning analyses. After Nb doping, the conductivity of the TiO₂ powder increases, and its flat‐band potential (V_fb) has a positive shift. The energy‐conversion efficiency of a cell based on 5.0 mol% Nb‐doped TiO₂ is significantly better, by about 18.2%, compared to that of a cell based on undoped TiO₂. The as‐prepared Nb‐doped TiO₂ material is proven in detail to be a better photoanode material than pure TiO₂, and this new synthetic approach using a water‐soluble precursor provides a simple and versatile way to prepare excellent photoanode materials.     

Development of Nano‐TiO2 dye sensitised solar cells on high mobility transparent conducting oxide thin films

The optical transmission of dye‐sensitised solar cells (DSCs) can be tuned by altering the dye and/or particle size of the mesoporous TiO₂ layers, to allow their application as the top device in tandem solar cells. To benefit from this semi‐transparency, parasitic optical losses by the transparent electrodes must be minimised. This work investigates the influence of using two different transparent conductors, namely, the high mobility material titanium doped indium oxide (ITiO) and fluorine doped tin oxide (FTO) as electrodes for semi‐transparent DSCs. The overall NIR transparency through the DSCs increased significantly as each FTO electrode was replaced by an ITiO electrode. This increase was from 20–45% in the 1300–700 nm wavelength range for fully FTO‐based cells, to about 60% for fully ITiO‐based cells, across the same spectrum. DSCs prepared on these electrodes exhibited short circuit currents ranging from 14·0–14·9 mA/cm². The conversion efficiency of the cell with ITiO as both the front and rear electrodes was 5·8%, which though significant, was lower than the 8·2% attained by the cell using FTO electrodes, as a result of a lower fill factor. Improvements in the ITiO thermal stability and in the processing of the TiO₂ interfacial layer are expected to improve the cell efficiency of such single DSC devices. The high current density and optical transparency of ITiO‐based DSCs make them an interesting option for tandem solar cells. Copyright © 2008 John Wiley & Sons, Ltd.     

A Hybrid Poly(ethylene oxide)/ Poly(vinylidene fluoride)/TiO2 Nanoparticle Solid‐State Redox Electrolyte for Dye‐Sensitized Nanocrystalline Solar Cells

High‐efficiency all‐solid‐state dye‐sensitized nanocrystalline solar cells have been fabricated using a poly(ethylene oxide)/poly(vinylidene fluoride) (PEO/PVDF)/TiO₂‐nanoparticle polymer redox electrolyte, which yields an overall energy‐conversion efficiency of about 4.8 % under irradiation by white light (65.2 mW cm^–2). The introduction of PVDF (which contains the highly electronegative element fluorine) and TiO₂ nanoparticles into the PEO electrolyte increases the ionic conductivity (by about two orders of magnitude) and effectively reduces the recombination rate at the interface of the TiO₂ and the solid‐state electrolyte, thus enhancing the performance of the solar cell.     

Efficient dye-sensitized solar cells based on CNTs and Zr-doped TiO2 nanoparticles

The light scattering, harvesting and adsorption effects in dye-sensitized solar cells (DSSCs) are studied by preparation of coated carbon nanotubes (CNTs) with TiO₂ and Zr-doped TiO₂ nanoparticles in the forms of mono- and double-layer cells. X-ray diffraction (XRD) analysis reveals that the phase composition of Zr-doped TiO₂ electrode is a mixture of anatase and rutile phases with major rutile content, whereas it is the same mixture with major anatase content for coated CNTs with TiO₂. Furthermore, the average crystallite size of Zr-doped TiO₂ electrode is slightly decreased with Zr introduction. Field emission scanning electron microscope (FE-SEM) images show that the porosity of Zr-doped TiO₂ electrodes is higher than that of undoped electrode, enhancing dye adsorption. UV–visible spectroscopy analysis reveals that the absorption onset of Zr-doped TiO₂ electrodes is slightly shifted to longer wavelength (the red-shift) in comparison with that of undoped TiO₂ electrode. Moreover, the band gap energy of TiO₂ nanoparticles is decreased by Zr introduction, enhancing light absorption. It is found that electron injection of monolayer TiO₂ electrode is improved by introduction of 0.025 mol% Zr, resulted in enhancement of its power conversion efficiency (PCE) up to 6.81% compared with 6.17% for pure TiO₂ electrode. Moreover, electron transport and light scattering are enhanced by incorporation of 0.025 wt% coated CNTs with TiO₂ in the over-layer of double layer electrode. Therefore, double layer solar cell composed of 0.025 mol% Zr-doped TiO₂ nanoparticles as the under-layer and mixtures of these nanoparticles and 0.025 wt% coated CNTs with TiO₂ as the over-layer shows the highest PCE of 8.19%.     

Manipulation of light harvesting for efficient dye‐sensitized solar cell by doping an ultraviolet light‐capturing fluorophore

An organic fluorophore is doped into a mesoporous TiO₂ photoelectrode to absorb ultraviolet light and convert it to green light for more efficient light harvesting of N719 dye. This fluorescence conversion enables the absorption of additional green light by dye molecules by means of Förster resonance energy transfer between fluorescent compound donor and N719 dye acceptor. Owing to close fit between the emission peak of fluorophore and the absorption peak of N719 dye, the Förster resonance energy transfer effect enhances the incident photon to current conversion efficiency of the dye‐sensitized solar cells based on fluorophore‐doped TiO₂ photoelectrodes. Improved power conversion efficiency (8.03–8.13%) is also achieved for the fluorophore‐doped (10⁻⁴ M) dye‐sensitized solar cells compared with a cell without the doping of fluorophore (7.63%). Copyright © 2013 John Wiley & Sons, Ltd.     

Efficient Dye‐Sensitized Solar Cells with Potential‐Tunable Organic Sulfide Mediators and Graphene‐Modified Carbon Counter Electrodes

A new class of organic sulfide mediators with programmable redox properties is designed via density functional theory calculations and synthesized for efficient dye‐sensitized solar cells (DSCs). Photophysical and electrochemical properties of these mediators derived from systematical functionalization of the framework with electron donating and withdrawing groups (MeO, Me, H, Cl, CF₃, and NO₂) are investigated. With this new class of organic mediators, the redox potential can be fine‐tuned over a 170 mV range, overlapping the conventional I^?/I₃^?couple. Due to the suitable interplay of physical properties and electrochemical characteristics of the mediator involving electron‐donating MeO group, the DSCs based on this mediator behave excellently in various kinetic processes such as dye regeneration, electron recombination, and mass transport. Thus, the MeO derivative of the mediator is identified as having the best performance of this series of redox shuttles. As inferred from electrochemical impedance spectroscopy and cyclic voltammetry measurements, the addition of graphene into the normal carbon counter electrode material dramatically improves the apparent catalytic activity of the counter electrode towards the MeO derivative of mediator, resulting in N719 based DSCs showing a promising conversion efficiency of 6.53% under 100 mW·cm^?2 simulated sunlight illumination.     

Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities

Deployment of dye solar cells (DSCs) for building integration application would require a highly efficient solar cell that work well in diffused light. In order to improve the efficiency of dye solar cell, an additional layer of ultrathin anatase titanium dioxide (TiO₂) has been deposited for strengthening the adhesion of the porous TiO₂-based photo electrode to the conductive transparent substrate, which can lead to an enhancement in electron transportation. Fabricated cells of 1 cm² area were tested under different light intensities (100, 33 and 10 mW cm⁻²) and characterized by scanning electron microscopy (SEM), Raman spectroscopy and electrochemical impedance spectroscopy (EIS). Analysis showed an increment in overall quantum conversion efficiency (η), as high as 35% compared to the standard cell without the additional layer of TiO₂. EIS analysis has proven that the additional ultrathin anatase layer has improved the collection efficiency (Φ_COLL) as the result of the enhancement in both electron transport and lifetime within the porous TiO₂ film which translated into better conversion efficiency of DSCs.     

Influence of Ti dopant on the properties and dye sensitized solar cell performance of ZnO chunk-shaped nanostructures

This paper presents the results of photoanode constructed with undoped and Ti-doped ZnO chunk shaped nanostructures for dye sensitized solar cells (DSSC). Nanostructures are prepared by simple chemical method and moreover the structural, morphological, optical and photovoltaic performances are investigated by XRD, SEM, UV–Vis, PL, and I–V measurements, respectively. The experimental observations demonstrate that the Ti is effectively doped into Zn site, which increases free electron concentration, hereby expected an enhancement in the DSSC performance. Fabricated DSSCs are tested and the results reveal that undoped ZnO shows conversion efficiency of 0.42% with better photocurrent density and photovoltage but the fill factor gets enhance up to 0.447 with 3 mole% (dilute) of Ti doping. Comparably, PEO/KI/LiI/I₂ electrolyte matches well for Ti doped ZnO DSSC due to the easier diffusion path offered by KI salt rather than TiO₂ and PEG additives.     

Synergistic Effect of Si Doping and Heat Treatments Enhances the Photoelectrochemical Water Oxidation Performance of TiO2 Nanorod Arrays

TiO₂ is a very promising photocatalytic material due to its merits including low cost, nontoxicity, high chemical stability, and photocorrosion resistance. However, it is also known that TiO₂ is a wide bandgap material, and it is still challenging to achieve high photocatalytic performance driven by solar light. In this paper, silicon‐doped TiO₂ nanorod arrays are vertically grown on fluorine‐doped tin oxide substrates and then are heat treated both in air and in vacuum. It is found that the silicon doping together with the heat treatment brings synergic effect to TiO₂ nanorod films by increasing the crystallinity, producing abundant oxygen vacancies, enhancing the hydrophilicity as well as improving the electronic properties. When used as photoanodes in photoelectrochemical water splitting, under the condition of AM 1.5G simulated solar irradiation and without using any cocatalysts, these nanorod films show photocurrent density as high as 0.83 mA cm^?2 at a potential of 1.23 V versus reversible hydrogen electrode, which is much higher than that of the TiO₂ nanorod films without doping or heat treating. The silicon‐doped TiO₂ nanorod array films described in this paper are envisioned to provide valuable platforms for supporting catalysts and cocatalysts for efficient solar‐light‐assisted water oxidation and other solar‐light‐driven photocatalytic applications.     

Honeycomb‐Like Organized TiO2 Photoanodes with Dual Pores for Solid‐State Dye‐Sensitized Solar Cells

A solid‐state dye‐sensitized solar cell (ssDSSC) with 7.4% efficiency at 100 mW/cm² is reported. This efficiency is one of the highest observed for N719 dye. High performance is achieved via a honeycomb‐like, organized mesoporous TiO₂ photoanode with dual pores, high porosity, good interconnectivity, and excellent light scattering properties. The TiO₂ photoanodes are prepared without any TiCl₄ treatment via a one‐step, direct self‐assembly of hydrophilically preformed TiO₂ nanocrystals and poly(vinyl chloride)‐g‐poly(oxyethylene methacrylate) (PVC‐g‐POEM) graft copolymer as a titania source and a structure‐directing agent, respectively. Upon controlling the secondary forces between the polymer/TiO₂ hybrid and the solvent by varying the amounts of HCl/H₂O mixture or toluene, honeycomb‐like structures are generated to improve light scattering properties. Such multifunctional nanostructures with dual pores provide good pore‐filling of solid polymer electrolyte with large volume, enhanced light harvesting and reduced charge recombination, as confirmed by reflectance spectroscopy, incident photon‐to‐electron conversion efficiency (IPCE), and electrochemical impedance spectroscopy (EIS) analysis.     

Non‐Corrosive,Non‐Absorbing Organic Redox Couple for Dye‐Sensitized Solar Cells

A new colorless electrolyte containing an organic redox couple, tetramethylthiourea (TMTU) and its oxidized dimer tetramethylformaminium disulfide dication ([TMFDS]²⁺), is applied to dye‐sensitized solar cells (DSCs). Advantages of this redox couple include its non‐corrosive nature, low cost, and easy handling. More impressively, it operates well with carbon electrodes. The DSCs fabricated with a lab‐made HCS‐CB carbon counter‐electrode can present up to 3.1% power conversion efficiency under AM 1.5 illumination of 100 mW·cm^?2 and 4.5% under weaker light intensities. This result distinctly outperforms the identical DSCs with a Pt electrode. Corrosive experiments reveal that Al and stainless steel (SS) sheets are stable in the [TMFDS]²⁺/TMTU‐based electrolyte. Its electrochemical impedance spectrum (EIS) is used to evaluate the influence of different counter‐electrodes on the cell performance, and preliminary investigations reveal that carbon electrodes with large surface areas and ideal corrosion‐inertness toward the sulfur‐containing [TMFDS]²⁺/TMTU redox couple exhibit promise for application in iodine‐free DSCs.     

Reactive pulsed laser deposited N–C codoped TiO2 thin films

TiO₂ is a large bandgap chemically stable oxide useful for several applications that involve photo-activated processes, including photocatalysis, photovoltaics, photoelectrolysis, etc. However, the large band gap renders this material not a very efficient absorber of the solar spectrum. Various schemes of cation and anion doping have been utilized that reduce this deficiency to a certain extent. In this paper we present the results of N–C codoping of TiO₂ thin films deposited by a reactive pulsed laser deposition technique. These films were compared for their optical and structural properties with undoped, N doped and C doped TiO₂ films prepared by the same technique. While all samples contained polycrystalline anatase phase, varying N₂ and CH₄ partial pressures resulted in change in TiO₂ lattice parameters due to codoping. X-ray diffraction high-resolution scans show the evidence of C incorporation into TiO₂ lattice by 2θ shift in (101) reflections due to large ionic radius of C. N doping was confirmed by XPS analyses. Direct relationship between oxygen vacancies and doping concentration was established by the deconvolution of XPS peaks. Considerable bandgap reduction occurred that was measured by using UV–vis diffuse reflectance spectroscopy. Results show that reactive pulsed laser deposition is indeed a useful method for the synthesis of codoped TiO₂ thin films as bandgap reduction of ~1.00 eV via N–C codoping was successfully achieved.     

Molecular Design of Unsymmetrical Squaraine Dyes for High Efficiency Conversion of Low Energy Photons into Electrons Using TiO2 Nanocrystalline Films

An optimized unsymmetrical squaraine dye 5‐carboxy‐2‐[[3‐[(2,3‐dihydro‐1, 1‐dimethyl‐3‐ethyl‐1H‐benzo[e]indol‐2‐ylidene)methyl]‐2‐hydroxy‐4‐oxo‐2‐cyclobuten‐1‐ylidene]methyl]‐3,3‐dimethyl‐1‐octyl‐3H‐indolium ( SQ02 ) with carboxylic acid as anchoring group is synthesized for dye‐sensitized solar cells (DSCs). Although the π‐framework of SQ02 is insignificantly extended compared to its antecessor squaraine dye SQ01 , photophysical measurements show that the new sensitizer has a much higher overall conversion efficiency η of 5.40% which is improved by 20% when compared to SQ01 . UV‐vis spectroscopy, cyclic voltammetry and time dependent density functional theory calculations are accomplished to rationalize the higher conversion efficiency of SQ02 . A smaller optical band gap including a higher molar absorption coefficient leads to improved light harvesting of the solar cell and a broadened photocurrent spectrum. Furthermore, all excited state orbitals relevant for the π–π* transition in SQ02 are delocalized over the carboxylic acid anchoring group, ensuring a strong electronic coupling to the conduction band of TiO₂ and hence a fast electron transfer.     

Metal-free indoline-dye-sensitized TiO2 nanotube solar cells

Titanium dioxide nanotubes were directly fabricated from commercial P25 TiO₂ via alkali hydrothermal transformation. The prepared titanate nanotubes were successfully used as an electrode material for dye-sensitized solar cells (DSCs). A metal-free organic dye (indoline dye D102) was used as a sensitizer. The used indoline dye D102 is of high purity (?98%) and high absorption coefficient (67,500 L mol⁻¹ cm⁻¹ at 501 nm). The TiO₂ pastes were prepared with PEG (Mw 20,000) and as-made TiO₂ nanotubes or P25 powders. Titania thin films were grown by screen printing method. High conversion efficiencies of light to electricity of around 9.8% and 7.6% under illumination of simulated AM1.5 sunlight (100 mW/cm²) were achieved with P25 and TiO₂ nanotube cells, respectively. The fill factor of DSCs based on TiO₂ nanotubes increased in comparison with that of DSCs based on TiO₂ nanoparticles. The electron transport and dye adsorption properties in both titanate nanotube and P25 electrodes were evaluated in terms of photovoltaic characteristics of the fabricated cells. The related mechanisms were discussed. The study provides a promising method for the development of high-efficiency and low-cost DSCs.     

Hybrid Templated Synthesis of Crack‐Free,Organized Mesoporous TiO2 Electrodes for High Efficiency Solid‐State Dye‐Sensitized Solar Cells

Organic/inorganic hybrid templates, i.e., aluminium oxide (Al₂O₃) nanoparticles grafted with poly(oxyethylene) methacrylate, Al₂O₃‐POEM, are synthesized via surface‐initiated atom transfer radical polymerization (ATRP), as confirmed by Fourier transform‐infrared spectroscopy (FT‐IR) and thermogravimetric analysis (TGA). Upon combining the Al₂O₃‐POEM with titanium(IV) isopropoxide (TTIP), hydrophilic TTIP is selectively confined in the hydrophilic POEM chains through hydrogen bonding interactions. Following the calcination at 450 °C and the selective etching of Al₂O₃ with NaOH, the OM‐TiO₂ films with high surface areas, good interconnectivity, and anatase phase are obtained. The solid‐state dye‐sensitized solar cells (ssDSSCs) fabricated with OM‐TiO₂ photoelectrodes and a polymerized ionic liquid (PIL) show a high energy conversion efficiency of 7.3% at 100 mW cm^?2, which is one of the highest values for ssDSSCs. The high cell performance is due to the well‐organized structure, resulting in improved dye loading, excellent pore filling of electrolyte, enhanced light harvesting, and reduced charge recombination.     

Doping‐Induced Charge Trapping in Organic Light‐Emitting Devices

By using pyran‐containing donor–acceptor dyes as doping molecules in organic light‐emitting devices (OLEDs), we scrutinize the effects of charge trapping and polarization induced by the guest molecules in the electro‐active host material. Laser dyes 4‐(dicyanomethylene)‐2‐methyl‐6‐[2‐(julolidin‐9‐yl)phenyl]ethenyl]‐4H‐pyran (DCM2) and the novel 4‐(dicyanomethylene)‐2‐methyl‐6‐{2‐[(4‐diphenylamino)phenyl]ethenyl}‐4H‐pyran (DCM‐TPA) are used as model compounds. The emission color of these polar dyes depends strongly on doping concentration, which we have attributed to polarization effects induced by the doping molecules themselves. Their frontier orbital energy levels are situated within the bandgap of the tris(8‐hydroxyquinoline)aluminum (Alq₃) host matrix and allow the investigation of either electron trapping or both electron and hole trapping. In the case of DCM‐TPA doping, we were able to show that electron trapping leads to a partial shift of the recombination zone out of the doped Alq₃ region. To impede charge‐recombination processes taking place in the undoped host matrix, a charge‐blocking layer efficiently confines the recombination zone inside the doped zone and gives rise to increased luminous efficiency. For a doping concentration of 1 wt.‐% we obtain a maximum luminous efficiency of 10.4 cd A^–1. At this doping concentration, the yellow emission spectrum shows excellent color saturation with CIE chromaticity coordinates x, y of 0.49 and 0.50, respectively. In the case of DCM2 the recombination zone is much less affected for the same doping concentrations, which is ascribed to the fact that both electrons and holes are being trapped. The experimental findings are corroborated with a numerical simulation of the doped multilayer devices.     

A Near‐Infrared cis‐Configured Squaraine Co‐Sensitizer for High‐Efficiency Dye‐Sensitized Solar Cells

A cis‐configured squaraine dye (HSQ1), synthesized by incorporation of a strongly electron‐withdrawing dicyanovinyl group into the central squaric acid moiety, is employed in dye‐sensitized solar cells (DSCs). In solution, HSQ1 displays an intense absorption in the near‐infrared region with a maximum at 686 nm and when the dye is adsorbed on a TiO₂ surface, the absorption spectrum broadens in both the blue and the near‐infrared regions, which is favorable for efficient light harvesting over a broad wavelength range. A solar cell sensitized with HSQ1 shows a broader incident photon‐to‐current conversion efficiency (IPCE) spectrum (from 400 to 800 nm) and a higher IPCE in the long‐wavelength region (71% at 700 nm) than a cell sensitized with squaraine dye SQ1. Furthermore, a solar cell co‐sensitized with HSQ1 and N3 dye shows remarkably improved short‐circuit current density and open‐circuit voltage compared to those of a DSC based on N3 alone and fabricated under the same conditions. The energy‐conversion efficiency of the co‐sensitized DSC is 8.14%, which is the highest reported efficiency for a squaraine dye–based co‐sensitized DSC without using Al₂O₃ layer.     

Room‐Temperature Synthesis of Porous Nanoparticulate TiO2 Films for Flexible Dye‐Sensitized Solar Cells

A novel room‐temperature method for the preparation of porous TiO₂ films with high performance in dye‐sensitized solar cells (DSSCs) has been developed. In this method a small amount of Ti^IV tetraisopropoxide (TTIP) is added to an ethanolic paste of TiO₂ nanoparticles, where it hydrolyzes in situ and connects the TiO₂ particles to form a homogenous and mechanically stable film of up to 10 μm thickness without crack formation. Residual organics originating from the TTIP were removed by UV–ozone treatment of the films, leading to a remarkable improvement of the cell efficiency. Intensity‐modulated photocurrent/voltage spectroscopy (IMPS/IMVS) showed that the main effect of the UV–ozone treatment is to suppress the recombination of photogenerated electrons, thereby extending their lifetime. The efficiency was further increased by preheating the TiO₂ nanoparticles before the paste preparation to remove contaminants originating from the preparation process of the particles. Solar‐to‐electric energy conversion efficiencies of 4.00 and 3.27 % have been achieved for cells with conductive glass and plastic film substrates, respectively, under illumination with AM 1.5 (100 mW cm^–2) simulated sunlight.     

Sulfate‐Assisted Interfacial Engineering for High Yield and Efficiency of Triple Cation Perovskite Solar Cells with Alkali‐Doped TiO2 Electron‐Transporting Layers

Facile electron injection and extraction are two key attributes desired in electron transporting layers to enhance the efficiency of planar perovskite solar cells. Herein it is demonstrated that the incorporation of alkali metal dopants in mesoporous TiO₂ can effectively modulate electronic conductivity and improve the charge extraction process by counterbalancing oxygen vacancies acting as nonradiative recombination centers. Moreover, sulfate bridges (SO₄^2?) grafted on the surface of K‐doped mesoporous titania provide a seamless integration of absorber and electron‐transporting layers that accelerate overall transport kinetics. Potassium doping markedly influences the nucleation of the perovskite layer to produce highly dense films with facetted crystallites. Solar cells made from K:TiO₂ electrodes exhibit power conversion efficiencies up to 21.1% with small hysteresis despite all solution coating processes conducted under ambient air conditions (controlled humidity: 25–35%). The higher device efficiencies are attributed to intrinsically tuned electronic conductivity and chemical modification of grain boundaries enabling uniform coverage of perovskite films with large grain size.     

Highly Efficient Solid‐State Dye‐Sensitized Solar Cells Based on Triphenylamine Dyes

Two triphenylamine‐based metal‐free organic sensitizers, D35 with a single anchor group and M14 with two anchor groups, have been applied in dye‐sensitized solar cells (DSCs) with a solid hole transporting material or liquid iodide/triiodide based electrolyte. Using the molecular hole conductor 2,2',7,7'‐tetrakis‐(N,N‐di‐p‐methoxyphenyl‐amine)9,9'‐spirobifluorene (spiro‐OMeTAD), good overall conversion efficiencies of 4.5% for D35 and 4.4% for M14 were obtained under standard AM 1.5G illumination (100 mW cm^?2). Although M14 has a higher molar extinction coefficient (by ～ 60%) and a slightly broader absorption spectrum compared to D35 , the latter performs slightly better due to longer lifetime of electrons in the TiO₂, which can be attributed to differences in the molecular structure. In iodide/triiodide electrolyte‐based DSCs, D35 outperforms M14 to a much greater extent, due to a very large increase in electron lifetime. This can be explained by both the greater blocking capability of the D35 monolayer and the smaller degree of interaction of triiodide (iodine) with D35 compared to M14 . The present work gives some insight into how the molecular structure of sensitizer affects the performance in solid‐state and iodide/triiodide‐based DSCs.