Synthesis,crystal structure and luminescence in Ca<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript>

Bluish green emitting phosphor, Ca₃Al₂O₆:Ce³⁺, is prepared by low-temperature combustion method. X-ray diffraction, photoluminescence, scanning electron microscopy techniques are used to characterize the synthesized phosphor. The most efficient bluish green (483 nm) emission is observed under the excitation by near UV light. The emission characteristics are credited to 5d → 4f type transitions in Ce³⁺. The luminescence properties of Eu²⁺ are predicted for the first time from those of Ce³⁺. Also, photoluminescence of Eu³⁺ is studied in the same host. The emission spectrum of Ca₃Al₂O₆:Eu³⁺ shows the peak at 592 (orange) and 614 nm (red) wavelengths. Ca₃Al₂O₆:Ce³⁺phosphor can be a potential blue phosphor for field emission display, solid-state lighting and LED.     

Influence of excitation wavelengths on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol-gel-combustion processing

Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ red-emitting long afterglow phosphor was synthesized by sol-gel-combustion methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu₂O₃, Dy₂O₃, H₃BO₃ and C₆H₈O₇·H₂O as raw materials. The crystalline structure of the phosphors were characterized by X-ray diffraction, luminescent properties of phosphors were analyzed by fluorescence spectrophotometer. The effect of excitation wavelengths on the luminescent properties of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors was discussed. The emission peak of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor lays at 516 nm under the excitation of 360 nm, and at 612 nm under the excitation of 468 nm. The results reveal that the Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor will emit a yellow-green light upon UV illumination, and a bright red light upon visible light illumination. The emission mechanism was discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions in Sr₃Al₂O₆. The afterglow time of (Sr_0.94Eu_0.03Dy_0.03)₃ Al₂O₆ phosphors lasts for over 600s after the excited source was cut off.     

Enhancement of photoluminescence properties of green to yellow emitting Y3Al5O12: Ce phosphor by AlN addition for white LED applications

AlN-substituted in Y₃Al₅O₁₂: Ce³⁺ phosphor was synthesized to improve the phosphor efficiency of phosphor-converted white light emitting diodes. The photoluminescence properties of AlN-substitued for Al₂O₃ in Y₃Al₅O₁₂: Ce³⁺ phosphor showed excellent green to yellow emission intensity under 460 nm. The highest emission intensity was observed at an AlN concentration of 0.3 mol and a Ce³⁺ concentration in the optimized flux of 0.20 mol. The green to yellow emitting AlN-substituted in Y₃Al₅O₁₂: Ce³⁺ phosphor can be applied to white LEDs.     

A novel blue-emitting Sr3Al2O5Cl2:Ce,Li phosphor for near UV-excited white-light-emitting diodes

A novel blue-emitting Sr₃Al₂O₅Cl₂:Ce³⁺,Li⁺ phosphor has been synthesized by solid state reaction. The excitation spectrum shows a broad band extending from 300 to 400 nm, and the emission spectrum shows a broad blue band peaking at 450 nm with a half width of about 100 nm. The emission intensity at 250 °C remains at about 50% of that at room temperature. The decay curve at the emission peak consists of fast and slow components. The Sr₃Al₂O₅Cl₂:Ce³⁺,Li⁺ should be a promising blue phosphor for near ultraviolet-based white-light-emitting diodes.     

Structural and optical characterization of RE (Eu<Superscript>2+</Superscript>, Ce<Superscript>3+</Superscript>) doped SrMg<Subscript>2</Subscript>Al<Subscript>6</Subscript>Si<Subscript>9</Subscript>O<Subscript>30</Subscript> nanocrystalline phosphor

This article present the reports on optical study of Eu²⁺ and Ce³⁺ doped SrMg₂Al₆Si₉O₃₀ phosphors, which has been synthesized by combustion method at 550 °C. Here SrMg₂Al₆Si₉O₃₀:Eu²⁺ emission band observed at 425 nm by keeping the excitation wavelength constant at 342 nm, whereas SrMg₂Al₆Si₉O₃₀:Ce³⁺ ions shows the broad emission band at 383 nm, under 321 nm excitation wavelength, both the emission bands are assigned due to 5d–4f transition respectively. Further, phase purity, morphology and crystallite size are confirmed by XRD, SEM and TEM analysis. However, the TGA analysis is carried out to know the amount of weight lost during the thermal processing. The CIE coordinates of SrMg₂Al₆Si₉O₃₀:Eu²⁺ phosphor is observed at x?=?0.160, y?=?0.102 respectively, which may be used as a blue component for NUV-WLEDs. The critical distance of energy transfer between Ce³⁺ ions and host lattice is found to be 10.65 Å.     

Luminescence properties and preparation of Lu<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> powder doped with Ce and Pr ions

Lu₃Al₅O₁₂:Ce³⁺ phosphor powder, which exhibits green emission band, was synthesized by the high-temperature solid-state reaction method with a flux BaF₂. X-ray diffraction (XRD), photoluminescence (PL) spectra, and fluorescent lifetime spectra were used to characterize the structure and luminescent properties of the sample. The XRD patterns indicated that when prepared at 1550 °C for 3 h with 4 wt% flux, Lu₃Al₅O₁₂:Ce³⁺ phosphors powder is the garnet cubic crystal system structure. Photoluminescence (PL) spectra showed that the Lu₃Al₅O₁₂:Ce³⁺ phosphor powder can be effectively excited by near ultraviolet and blue light, emitting broad band peaking at 505 nm, which is attributed to ²F_5/2?→?²D_5/2 transition. The self-concentration quenching mechanism of Ce³⁺ is the dipole–dipole interaction. Small amount of Pr³⁺ increased red light emission at 610 nm. Photoluminescence (PL) spectra and fluorescent lifetime spectra indicated that there was an efficient energy transfer process between Ce³⁺ and Pr³⁺.     

Synthesis and characterizations of Dy3+ doped Sr3Al2O6:Eu2+ powder phosphors through citric acid precursor

Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors were synthesized by the polymer precursor method. The X-ray powder diffraction patterns show that the samples have a cubic structure with a space group of Pa3. In the excitation spectrum, the phosphors show a wide absorption in the UV region from 250 to 450 nm, which corresponds to the crystal field splitting of the Eu²⁺ d-orbital. All the emission spectrum of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors show the broad band emission peaked at about 518 nm, which can be ascribed to the typical 4f⁶5d¹ → 4f⁷ transitions of Eu²⁺ ions. And the best dopant concentration of Dy³⁺ ions for Sr₃Al₂O₆:2 mol%Eu²⁺, xDy³⁺ phosphors is 2 mol%. The excitation wavelengths have no influences on emission peaks, but have clear influences on emission intensities.     

Influence of calcination temperature on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol–gel-combustion processing

The detailed preparation process of Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ phosphor powders with red long afterglow by sol–gel-combustion method in the reducing atmosphere is reported. X-ray diffraction, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the effects of synthesis temperature on the crystal characteristics, morphology and luminescent properties of the as-synthesized Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors. The results reveal that Sr₃Al₂O₆ crystallizes completely when the combustion ash is sintered at 1200 °C. The excitation and the emission spectra indicate that the excitation broad-band lies chiefly in visible range and the phosphor powders emit strong light at 618 nm under the excitation of 472 nm. The light intensity and the light-lasting time of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors are increased when increasing the calcination temperatures from 1050 to 1200 °C. The afterglow of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors sintered at 1200 °C lasts for over 600 s when the excited source is cut off. The red emission mechanism is discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions.     

Effect of BaF2 powder addition on the synthesis of YAG phosphor by mechanical method

Here, we report on the effect of BaF₂ powder addition on the mechanical synthesis of Ce³⁺-doped Y₃Al₅O₁₂ (Y_2.97Al₅O₁₂:Ce_0.03³⁺, YAG:Ce³⁺) phosphors for white light emitting diodes. The YAG phosphors were synthesized by the mechanical method using an attrition-type mill. When BaF₂ was added at 6 wt% to the raw powder materials and milled, the synthesis of YAG:Ce³⁺ was favorably achieved at the vessel temperature of 255 °C, which was about 1200 °C lower than the YAG phosphor synthesis temperature by solid-state reaction. The synthesized YAG:Ce³⁺ phosphor revealed the maximum internal quantum yield of 57%.     

Thermally stable luminescence and energy transfer in Ce, Mn doped Sr2Mg(BO3)2 phosphor

Sr₂Mg(BO₃)₂:Ce³⁺,Li⁺ and Sr₂Mg(BO₃)₂:Ce³⁺,Li⁺,Mn²⁺ phosphors have been synthesized by conventional solid state reaction technology at 900 °C for 12 h in reducing atmosphere. The phase purity, photoluminescence (PL) properties, thermal stability, energy transfer and luminescent decay curves have been investigated. Sr₂Mg(BO₃)₂:Ce³⁺,Li⁺,Mn²⁺ phosphors show blue and deep-red¹ emission bands. The deep-red emission band is attributed to the energy transfer from Ce³⁺ to Mn²⁺. The fluorescence lifetimes of Ce³⁺ in co-doped sample are shorter than that in single doped one, which confirms that the energy transfer takes place. The phosphors have weak thermal quenching. The luminescence properties of Sr₂Mg(BO₃)₂:Ce³⁺,Li⁺,Mn²⁺ make the phosphor a new bicolor emitting material.     

Crystal structure and luminescence property of a single-phase white light emission phosphor Sr<Subscript>3</Subscript>YNa(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>F:Dy<Superscript>3+</Superscript>

A series of single-phase Sr₃YNa(PO₄)₃F:Dy³⁺ phosphors were successfully synthesized via a conventional solid state reaction process. The powder X-ray diffraction patterns were utilized to confirm the phase composite and crystal structure. The phosphor could be excited by the ultraviolet visible light in the region from 300 to 420 nm, and it shown two dominant emission bands peaking at 484 nm (blue light) and 580 nm (yellow light) which originated from the transitions of ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 of Dy³⁺, respectively. The optimum dopant concentration of Dy³⁺ ions was confirmed to be 7 mol% in Sr₃YNa(PO₄)₃F:Dy³⁺ system and the concentration quenching mechanism is dipole–dipole interaction. The lifetime values of Dy³⁺ ions at different concentrations (x?=?0.03, 0.05, 0.07, 0.09 and 0.11) were determined to be about 0.855, 0.759, 0.686, 0.606 and 0.546 ms, respectively. The thermal stability of luminescence of Sr₃YNa(PO₄)₃F:0.07Dy³⁺ phosphor was also investigated and the activated energy was deduced to be 0.228 eV, which shows good thermal stability. The chromaticity coordinates fall in the white-light region calculated by the emission spectrum. These results show that Sr₃YNa(PO₄)₃F:Dy³⁺ phosphor can be a promising white emitting phosphor for white LEDs.     

Luminescence properties and energy transfer investigations of Ce3+/Tb3+ co-doped BaY2Si3O10 phosphor

A novel phosphor BaY₂Si₃O₁₀ (BYSO): Ce³⁺, Tb³⁺ was synthesized by the conventional solid-state reaction, which displays tunable color emission from blue to blue-green under ultraviolet excitation by adjusting the radio of Ce³⁺ and Tb³⁺ appropriately. Photoluminescence characteristics were carefully investigated. We demonstrate the existence of efficient energy transfer from Ce³⁺ to Tb³⁺ in BaY₂Si₃O₁₀: Ce³⁺, Tb³⁺ phosphor. The energy transfer Ce³⁺ → Tb³⁺ was proved to be governed by dipole–quadrupole interaction.     

Facile combustion synthesis and photoluminescence properties of Ce3+ doped Sr2La8(SiO4)6O2 phosphors

The Sr₂La₈(SiO₄)₆O₂:Ce³⁺ powder phosphor with apatite structure has been successfully synthesized via a facile route of sol-combustion technique. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectroscopy were used to characterize the as-prepared samples. Sr₂La₈(SiO₄)₆O₂:Ce³⁺ phosphor was composed of particles with average sizes range about 300 nm. The phosphor exhibited an absorption ranging from 220 to 390 nm in ultraviolet range and a broad blue-violet emission band peaked at 403 nm with a CIE coordinates of (0.167, 0.028). The concentration quenching mechanism was also determined to be dipole–dipole interaction.     

Preparation and photoluminescence properties of Sr4Al14O25:Eu2+ phosphors synthesized via the microemulsion route

Strontium aluminate phosphors doped with europium ions (Sr₄Al₁₄O₂₅:Eu²⁺) were successfully synthesized via the microemulsion route. In comparison with the traditional solid-state reaction process, the calcination temperature of Sr₄Al₁₄O₂₅:Eu²⁺ phase in this study was lowered to 1,100 °C when the flux was added. In addition, the particle size of Sr₄Al₁₄O₂₅:Eu²⁺ phosphors prepared via the microemulsion route was greatly reduced to 50 nm. The lowered synthesis temperature and reduced particle size are attributed to nano-scaled micelles formed in the microemulsion system. The emission and excitation intensity of Sr₄Al₁₄O₂₅:Eu²⁺ phosphors were increased with an increase in the synthesis temperature. In addition, the rise in the calcination temperature lowered the afterglow characteristics of Sr₄Al₁₄O₂₅:Eu²⁺ phosphors. The microemulsion route was demonstrated to be an more effective process than the solid-state reaction process for preparing Sr₄Al₁₄O₂₅:Eu²⁺ phosphors.     

The development of Ce3+-activated (Gd,Lu)3Al5O12 garnet solid solutions as efficient yellow-emitting phosphors

Abstract

Ce³⁺-activated Gd₃Al₅O₁₂ garnet, effectively stabilized by Lu³⁺ doping, has been developed for new yellow-emitting phosphors. The powder processing of [(Gd_1?xLu_x)_1?yCe_y]₃Al₅O₁₂ solid solutions was achieved through precursor synthesis via carbonate precipitation, followed by annealing. The resultant (Gd,Lu)AG:Ce³⁺ phosphor particles exhibit typical yellow emission at ～570 nm (5d–4f transition of Ce³⁺) upon blue-light excitation at ～457 nm (the ²F_5/2–5d transition of Ce³⁺). The quenching concentration of Ce³⁺ was determined to be ～1.0 at% (y = 0.01) and the quenching mechanism was suggested to be driven by exchange interactions. The best luminescent [(Gd_0.9Lu_0.1)_0.99Ce_0.01]AG phosphor is comparative to the well-known YAG:Ce³⁺ in emission intensity but has a substantially red-shifted emission band that is desired for warm-white lighting. The effects of processing temperature (1000–1500 °C) on the spectroscopic properties of the phosphors, especially those of Lu³⁺/Ce³⁺, were thoroughly investigated and discussed from the centroid position and crystal field splitting of the Ce³⁺ 5d energy levels.     

Synthesis of Sr4Al14O25:Eu2+ green emitting luminescent nano-pigment by solution combustion method

Luminescent nano-pigments based on strontium aluminates doped with various amounts of europium rare earth ion (Sr₄Al₁₄O₂₅:Eu²⁺) were synthesized by solution combustion method which involves the exothermic reaction of an oxidizer and an organic fuel. It is a suitable method for producing chemically homogenous and pure powders with very fine particle size. Phases studies by X-ray diffractometer indicated formation of pure phase Sr₄Al₁₄O₂₅ with crystallite sizes about 52.46 nm and peak shift of about 2θ = 0.26° due to Eu²⁺ doping. scanning electron microscope micrographs also revealed that the particles have irregular morphology and wide particle size distribution. The emission spectrum showed main emission peak at about 480 nm. Energy transfer mechanism between the two emission centers and the effect of Eu²⁺ ion concentration on emission spectrum was studied and it was deduced that the maximum emission intensity occurred at 4 at% of Eu²⁺. Absorption spectrum of the samples were lower than 0.5 %, especially in emission region of the doped pigments.     

Synthesis and luminescence properties of a novel UV-emitting phosphor Sr<Subscript>3</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>:Ce<Superscript>3+</Superscript>

The ultraviolet (UV)-emitting Sr₃P₄O₁₃:Ce³⁺ phosphors were synthesized via the solid-state reaction method, and their structural, morphological and luminescence properties were characterized by X-ray diffraction analysis, scanning electron microscopy, photoluminescence spectroscopy. The obtained results indicate that these phosphors can be effectively excited by short-wavelength ultraviolet (<300 nm), and exhibit long-wavelength ultraviolet (300–380 nm) emission with nanosecond-level fluorescence lifetime corresponding to the parity-allowed 5d–4f transitions of Ce³⁺. The concentration-quenching phenomenon of Ce³⁺ in Sr₃P₄O₁₃ host was also studied, in which the critical energy transfer distance between Ce³⁺ ions and concentration quenching mechanism were determined.     

Combustion synthesis and photoluminescence study of UV emitting LaBaB<Subscript>9</Subscript>O<Subscript>16</Subscript> phosphors

The borate phosphor LaBaB₉O₁₆ doped with Ce³⁺ ion intentionally and successfully synthesized using solution combustion rout using metal nitrates as precursors and urea as fuel. The phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy and photoluminescence spectroscopies. The XRD patterns of the phosphor confirmed the successful crystallization of LaBaB₉O₁₆. The average crystallite size calculated using the Debye Scherer equation. The PL excitation spectra of LaBaB₉O₁₆ exhibited broad spectra peaking at 275 nm. Upon excitation with ultraviolet (UV) radiation at 274 nm the phosphor exhibited a broad band UV emission peaking at a wavelength of 335 nm corresponding to the 4f⁰5d¹??4f¹ transition of the Ce³⁺ ion. Moreover the influence of concentration of Ce³⁺ ion on luminescence properties has also been studied. Optimum concentration of Ce³⁺ ions in the prepared phosphor was found to be 0.05 mol. For this concentration the critical distance R₀ was calculated to be 22.04 Å. Finally, the Stokes shift for the synthesized phosphor was calculated to be 6512 cm^??1 using corresponding excitation and emission.     

Effect of Al3+ on the photoluminescence properties of Ce3+-doped Zn3(BO3)2 nanoparticles

Zn₃(BO₃)₂ nanoparticles doped with Ce³⁺ and Al³⁺ have been prepared by co-precipitation method. The study on the XRD pattern and Fourier transform infrared spectroscopy (FT-IR) shows that the diffraction lines are in good agreement with monoclinic crystalline phase of Zn₃(BO₃)₂. Ce³⁺-doped Zn₃(BO₃)₂ nanoparticles show a broader emission band at 405 nm, which is attributed to the d–f transition 5d–4f¹ of Ce³⁺. The effect of Al³⁺ on luminescence properties of Ce³⁺ has been studied. The results show that the fluorescence intensity of Ce³⁺ is enhanced greatly.     

The effect of AlN and flux addition on luminescence properties of Ce doped TAG phosphor for white light emitting diodes

A series of Ce³⁺-activated Tb₃Al₅O₁₂ green-yellow phosphors were synthesized using solid state reaction method. The X-ray diffraction peaks of the synthesized phosphor were well matched to the Tb₃Al₅O₁₂ reference peak data. As the addition amount of AlN increase, the relative intensity of diffraction peak increase. But, the addition amount of AlN is over 0.3 mol, the second phase TbAlO₃ diffraction peaks increase. When the addition amount of AlN is 0.3 mol, PL shows the highest emission efficiency. These results were explained by the reducing atmosphere made using AlN. The highest emission intensity was observed when the Ce³⁺ concentration is 0.25 mol. The emission intensity of the Tb_2.75Al₅O₁₂:Ce_0.25³⁺ phosphors were increased by adding BaF₂ and KNO₃ as a flux. The yellow emitting Tb₃Al₅O₁₂:Ce³⁺ phosphors obtained could be applied as white LEDs.