共查询到19条相似文献,搜索用时 125 毫秒
1.
2.
采用力平衡法推导出钢丝缠绕增强塑料复合管常温下短期爆破压力计算公式。开展复合管短期爆破压力试验研究,得到20种型号复合管短期爆破压力试验结果。计算值与实验值相对误差在-11.9%~7.4%内,相对误差平均值为-1.5%。结果表明,所推导的公式具有较高的计算精度,能准确预测钢丝缠绕增强塑料复合管短期爆破压力,用于强度优化设计。 相似文献
3.
近些年来,建筑给排水的最大热点是新型管材的广泛应用。传统的镀锌钢管和普通排水铸铁管由于易锈蚀、自重大、运输施工不便等原因被取而代之。目前,建筑给排水常用管材主要有塑料管.金属管和复合管三种。现在就常用管材的一些特性,优缺点,使用范围做一简要论述。 相似文献
4.
5.
钢丝缠绕增强塑料复合管力学性能的试验研究 总被引:1,自引:1,他引:0
对钢丝缠绕增强塑料复合管的短期爆破压力、应变、临界失稳压力和不同温度下的失效形式等进行了系统的试验研究。结果表明,与相同规格尺寸的PE管相比,其短期爆破压力、环向刚度和临界失稳压力分别提高了129%、19%和57%;在内压作用下这种复合管有韧性破坏和过度变形两种失效模式,温度低于45℃时为韧性破坏,温度高于45℃时为过度变形;在相同压力下仅受径内压作用时这种复合管的径向膨胀率明显高于径向轴向同时受力时的径向膨胀率。 相似文献
6.
7.
管道运输的便利促进了管材的发展,单一的金属管材或是塑料管材都有其自身的缺陷,由此导致了钢塑复合管的研发和生产热潮。本文简述了钢塑复合管材的主要生产技术:冷拉塑料管成型法、冷拉钢管成型法、热等压法和粘胶剂成型法,并对各种方法的优缺点进行了分析。 相似文献
8.
铝塑复合管受力状态讨论及优化结构分析 总被引:1,自引:0,他引:1
对液体压力作用下的铝塑复合管的受力状态在弹性变形范围内进行了力学分析,得到了在真实应力状态下的管材各承力层的应力分布和管材的优化结构。 相似文献
9.
10.
11.
通过对水膜流状态下的流速与能量方程、充水率及空气压差的分析,认为在终限流速相等的条件下,塑料管排水的能力比同管径铸铁管小。且塑料排水立管通水能力应从管内压力波动及空气压差两方面综合考虑。 相似文献
12.
13.
介绍了钢骨架聚乙烯复合管的结构、性能和安装要点,在硫铵母液系统中的使用表明,该管具有成本低、机械强度高、耐热、耐腐蚀、耐磨损、施工方便和输送阻力小等优点,值得推广应用。 相似文献
14.
R. C. Weingart R. K. Jackson C. A. Honodel R. S. Lee 《Propellants, Explosives, Pyrotechnics》1980,5(6):158-162
The shock initiation threshold of PBX-9404 has been studied over the pressure range 3.1 GPa-28 GPa with pulse lengths ranging from 0.007 μs-0.63 μs. The short-duration, high pressure pulses were produced by the impact of thin plastic flyer plates accelerated by electrically exploded metal foils. We performed the experiments on explosive pellets 25.4 mm in diameter with thicknesses of 6.0 mm, 10.1 mm and 19.1 mm. No dependence of the initiation threshold on pellet thickness was observed. The data are represented reasonably well by either the critical initiation energy or by the constant P2τ initiation criteria. 相似文献
15.
分析了中美及ISO(欧洲)塑料压力管道标准体系及定级要求的差异,其中国标(GB)标准体系与欧洲(ISO)标准体系要求一致,与美国(ASTM)标准体系有一定区别,但其聚合物管道长期性能评价的原理一致。分别介绍了ASTM D2837、ISO 9080和GB 182525等标准提出的PVC⁃C管道的压力设计基础以及管材混配料的定级曲线,阐明了依据GB/T 39380.1—2021如何判定喷水灭火用PVC⁃C管道混配料的定级曲线是否合格。通过对国内外氯化聚氯乙烯(PVC⁃C)消防管材标准进行了对比,结果标明,国标与美标规格尺寸、管材壁厚等性能要求上基本一致;我国GB/T 39380要求的管道系统可以保证在我国的消防压力设计条件下(20 ℃)50年的安全使用期。 相似文献
16.
介绍了供水用的铝塑复合管材、孔网钢带聚乙烯复合管材和复合涂塑焊接钢管,以及不锈钢与碳钢(或塑料)复合管材的性能特点,并展望了建筑供水领域中复合管材的发展趋势。 相似文献
17.
Failure and stress analyses were carried out for composite pipes adhesively joined with sleeves subjected to internal pressure. In the study, the composite pipes and sleeves were E glass fiber/epoxy with different fiber orientation angles. Circular pieces cut from four layered composite pipes with different orientation angle were used as sleeves. Composite pipes with different orientation angle were bonded using DP410 and DP490 type adhesives. The codes of a numerical model were generated via ANSYS software package for the numerical analyses, and the numerical results were verified using experimental results. The problems were analyzed by using a calculation method based on finite elements method (FEM). The finite element analyses (FEA) were carried out to predict the failure internal pressure. Radial, tangential, axial and shear stress values were obtained via numerical analyses for composite pipes and adhesive layers in the thickness direction. In addition, Von–Mises stress distributions that develop on the adhesive were obtained as well. The effects of orientation angle, sleeve length and adhesive type on strength of composite pipe and bonded zone were examined. The results showed that the adhesive type has higher effect on the strength of bonded composite pipes when compared with orientation angle and sleeve length. In addition, increase in sleeve length increased the failure internal pressure. 相似文献
18.
综述了近年来中国塑料管道行业涌现的改性聚氯乙烯(PVC-M)管、双轴取向聚氯乙烯(PVC-O)管、耐热聚乙烯(PE-RT)管、β-PP-R管、超高相对分子质量聚乙烯(PE-UHMW)管等塑料管道新产品的研发和应用进展,介绍了塑料和金属复合管道及塑料和塑料复合管道的技术特点和应用领域。此外,对于一些新出现的塑料管道系统也做了详细的阐述,重点说明了它们和建筑应用技术结合的优势。最后,结合国家的产业政策,对中国塑料管道行业前景进行分析和展望。 相似文献
19.
采用有限元分析研究了单一内压作用时局部减薄缺陷对三通管塑性极限内压的影响。总结出含底部缺陷三通管的塑性极限载荷随缺陷尺寸影响的变化规律。 相似文献