Spectral properties of single-walled carbon nanotubes encapsulating fullerenes

Single-walled carbon nanotubes (SWCNTs) with diameter ranged from 1.22 to 1.6 nm filled with C₆₀, C₇₀ and C₆₀H₂₈ molecules (peapods), as well as double-walled carbon nanotubes (DWCNTs) derived from peapods, were studied by HRTEM, UV-vis-NIR and Raman spectroscopy. Suspensions with accurate concentration were used for spectroscopic studies to enable quantitative comparison of different substances. Filling of the SWCNTs with C₇₀ molecules resulted in a reduced van der Waals interaction between the tubes in a bundle. The DWCNTs have lower intensity of the van Hove bands and weaker photoluminescence. Raman spectra at 633 and 1064 nm excitation wavelengths reveal that RBM frequencies of C₆₀ and C₇₀ peapods are equally downshifted compared to empty tubes. It was found that filling of the nanotubes with C₆₀ and C₇₀ caused spectral shifts of absorption bands: thin tubes display red shifts, while thick ones show blue shifts. DWCNTs and C₆₀H₂₈@SWCNTs do not show any shifts. All the results suggest that the filling of nanotubes with fullerenes alters the average diameter of the electron cloud around SWCNT framework; namely, it increases for thin SWCNTs, and decreases for thick ones. Our attempts to structurally assign thick nanotubes using reported extrapolations from data for thin tubes were unsuccessful.     

Impact of nanometal catalysts on the laser vaporization synthesis of single wall carbon nanotubes

The effects of catalyst particle size on the purity, yield, and purification efficiency of single wall carbon nanotubes (SWCNTs) synthesized via pulsed laser vaporization were investigated. The purity of as-produced SWCNT material synthesized using Ni and Co nanometal (∼13 nm diameter) catalyst particles was compared to material synthesized using conventional micronmetal (2-3 μm diameter) particles. The SWCNT material from nanometal catalysts demonstrated a 50% increase in SWCNT purity as assessed by optical absorption spectroscopy and thermogravimetric analysis (TGA). A change in the thermal oxidation properties was also observed with the nanometal-SWCNTs exhibiting a suppression of the exothermic oxidation of post-synthesis catalyst. Statistical analysis of the TGA residue yielded mean post-synthesis catalyst particle diameters of 18 ± 6 nm and 3 ± 1 nm for the micronmetal and nanometal produced material, respectively. When a thermal oxidation profile was performed, the micronmetal-produced material showed the typical decrease in SWCNT purity with increasing oxidation temperature while the nanometal-produced material showed increasing SWCNT purity with increasing temperature. Overall, the use of nanometal catalysts significantly increases synthesis yield and offers novel thermal oxidation procedures to thermally remove carbonaceous impurities without the aid of acid treatments for the development of potential large-scale purification processing.     

Production of single-walled carbon nanotubes with narrow diameter distribution using iron nanoparticles derived from DNA-binding proteins from starved cells

Iron nanoparticles derived from DNA-binding proteins from starved cells (Dps) were used to grow single-walled carbon nanotubes (SWCNTs) with narrow diameter distribution. An atomic force microscopy, Raman spectroscopy, and photoluminescence were used for evaluation of diameter or chirality distribution of the SWCNTs. We found that thin SWCNTs (1.1 nm diameter) were grown from the large Dps-derived nanoparticles (2.4 nm diameter) on and above the substrates. From the size comparison with ferritins and Co-filled apoferritins, we also found that SWCNTs become thinner as the catalyst becomes smaller. The synthesis of smaller catalysts (ca. 1 nm diameter) and their use for growth becomes crucial for the control of SWCNT diameter.     

In situ EPR spectroelectrochemistry of single-walled carbon nanotubes and C60 fullerene peapods

The first in situ electron paramagnetic resonance (EPR) spectroelectrochemical study of C₆₀ fullerene peapods (C₆₀@SWCNT) as well as that of single-walled carbon nanotubes (SWCNTs) in different electrolyte solutions describes the formation of spin states by charge transfer reactions. Electrochemical reduction of peapods at high negative potentials causes the production of spins at the SWCNT site, while the intratubular fullerene is unchanged.Slightly anisotropic EPR signals were detected during electrochemical reduction of single-walled carbon nanotubes and fullerene peapods in the potential region from −1.75 to −2.15 V vs. decamethylferrocene/decamethylferrocinium couple. They are centered at g = 2.0038 and exhibit a hyperfine structure indicating the presence of functional groups containing N, O, H atoms in neighborhood. They differ from the EPR signals of chemically (potassium) doped SWCNT and C₆₀@SWCNT. As the EPR signal is influenced by the electrolyte counter ions a reaction with electrolysis products of tetraalkylammonium cations is taken into consideration. No EPR lines of fullerene anions were found in electrochemically treated peapods, but these anions are detectable, if a free C₆₀ in solution is cathodically reduced on a SWCNT electrode.     

Metal catalyst-free mist flow chemical vapor deposition growth of single-wall carbon nanotubes using C60 colloidal solutions

Metal catalyst-free mist flow chemical vapor deposition (CVD) growth of single-walled carbon nanotubes (SWCNTs) with C₆₀ fullerenes has been investigated by using an aqueous colloidal C₆₀ solution. Under the optimum reaction condition, relatively uniform SWCNTs with a mean diameter of 1.28 nm can be synthesized without any treatments of C₆₀ prior to CVD. Cap opening, nucleation and the growth of SWCNTs have been occurring almost simultaneously during the present CVD. C₆₀ can be used as the seeds (i.e., end-caps) of SWCNTs, in which oxygen atoms from water molecules provide etching of C₆₀ into caps. Furthermore, the coalescence of C₆₀ caps into a larger one leads to the growth of SWCNTs with larger diameters.     

Surfactant-free assembling of functionalized single-walled carbon nanotube buckypapers

The electrical and textural properties of single-walled carbon nanotube buckypapers were tunned through chemical functionalization processes. Single-walled carbon nanotubes (SWCNTs) were covalently functionalized with three different chemical groups: Carboxylic acids (-COOH), benzylamine (-Ph-CH₂-NH₂), and perfluorooctylaniline (-Ph-(CF₂)₇-CF₃). Functionalized SWCNTs were dispersed in water or dimethylformamide (DMF) by sonication treatments without the addition of surfactants or polymers. Carbon nanotube sheets (buckypapers) were prepared by vacuum filtration of the functionalized SWCNT dispersions. The electrical conductivity, textural properties, and processability of the functionalized buckypapers were studied in terms of SWCNT purity, functionalization, and assembling conditions. Carboxylated buckypapers demonstrated very low specific surface areas (< 1 m²/g) and roughness factor (R_a = 14 nm), while aminated and fluorinated buckypapers exhibited roughness factors of around 70 nm and specific surface areas of 160-180 m²/g. Electrical conductivity for carboxylated buckypapers was higher than for as-grown SWCNTs, but for aminated and fluorinated SWCNTs it was lower than for as-grown SWCNTs. This could be interpreted as a chemical inhibition of metallic SWCNTs due to the specificity of the diazonium salts reaction used to prepare the aminated and fluorinated SWCNTs. The utilization of high purity as-grown SWCNTs positively influenced the mechanical characteristics and the electrical conductivity of functionalized buckypapers.     

Theoretical study of adsorption of C1-C3 alkoxides on various cap-ended and open-ended armchair (5,5) single-walled carbon nanotubes

Adsorption of methoxide, ethoxide and n-propoxide ions on perfect and Stone-Wales defect armchair (5,5) single-walled carbon nanotubes (SWCNTs) of cap-ended C₈₀, C₁₂₀, open-ended C₈₀H₂₀ and C₁₂₀H₂₀ were investigated using two different models. The energetics and thermodynamic properties of adsorption reactions on these SWCNTs were obtained. In the relative alkoxides adsorption on either perfect or Stone-Wales defect of either cap-ended or open-ended (5,5) SWCNTs and their protonated forms are in order: methoxide > ethoxide > n-propoxide. The open-ended SWCNT system, stabilities of alkoxides adsorbed on perfect tubes are more stable than on Stone-Wales defect tubes.     

Fabrication of single-walled carbon nanotube three-dimensional networks inside the pores of a porous silicon structure

Single-walled carbon nanotube (SWCNT) three-dimensional (3-D) networks were first fabricated in the pores of a porous silicon substrate using thermal decomposition of C₂H₂ at 800 °C. Catalyst nanoparticles were uniformly distributed on the inner wall surfaces of the pores using a dipping method combined with ultrasonication. SWCNTs were synthesized along the inner wall surface of the pores, and spanned it. The suspended SWCNTs inside the pores formed 3-D networks in the results of the chaotic overgrowth of SWCNTs in a confined space under thermal vibration, and van der Waals interactions between SWCNTs.     

Purification of single-walled carbon nanotubes using a fixed bed reactor packed with zirconia beads

Single-walled carbon nanotube (SWCNT) soot produced by arc discharge was purified through gas and liquid phase oxidations. In the gas-phase oxidation, zirconia beads with different diameters of 1, 5, and 10 mm were packed together with raw SWCNT soot inside a vertical quartz tube to enhance air flow uniformity and an exposed surface area of the raw soot during thermal oxidation in air. A decrease of the bead sizes led to such a stronger oxidation of carbonaceous impurities that ∼10 wt.% higher weight loss was then achieved with the 1 mm beads than without them. A subsequent HNO₃ treatment and the second thermal oxidation were engaged to improve further the purity of SWCNTs. Thermogravimetric (TG) analysis, scanning electron microscopy, high resolution transmission electron microscopy, and Raman spectroscopy were used to characterize the samples. The derivative TG (DTG) curves were deconvoluted to quantitatively determine the SWCNT purity of the samples. Our final purified samples showed a yield of ∼26%, a metal impurity of ∼7% and a SWCNT purity of ∼83% as calculated from the deconvoluted DTG curves.     

Effect of hole size on the incorporation of C60 molecules inside single-wall carbon nanohorns and their release

We created holes in single-wall carbon nanohorns (SWCNH) by oxidation (SWCNHox) and investigated how the hole size affected the incorporation of C₆₀ in SWCNHox and their release from it. The incorporation of C₆₀ inside SWCNHox first occurred when the holes were opened by oxidation at 475 °C. It was followed by a steep increase in the incorporation quantity with increasing oxidation temperature. The release rate of C₆₀ from inside SWCNHox was slower than that of C₆₀ crystallites located outside, and did not depend on the oxidation temperature (475-550 °C), indicating that the release rates were not influenced by the hole sizes.     

DFT and tight binding Monte Carlo calculations related to single-walled carbon nanotube nucleation and growth

Density-functional theory (DFT) calculations for idealized nucleation processes of (5, 5) and (10, 0) single-walled carbon nanotubes (SWCNTs) on a 55 atom nickel cluster (Ni₅₅) showed that it requires a larger chemical potential to grow a carbon island (which is the simplest structure that can lead to formation of the SWCNTs) on the cluster than to extend the island into a SWCNT or to have the carbon atoms dispersed on the cluster surface. Hence, in the thermodynamic limit the island will only form once the (surface of the) cluster is saturated with carbon, and the island will spontaneously form a SWCNT at the chemical potentials required to create the island. The DFT (zero Kelvin) and tight binding Monte Carlo (1000 K) also show that there is a minimum cluster size required to support SWCNT growth, and that this cluster size can be used to control the diameter, but probably not the chirality, of the SWCNT at temperatures relevant to carbon nanotube growth. It also imposes a minimum size of clusters that are used for SWCNT regrowth.     

Fabrication of single-walled carbon nanotube Schottky diode with gold contacts modified by asymmetric thiolate molecules

We have fabricated single-walled carbon nanotube (SWCNT) Schottky diodes by asymmetrically modifying the two Au/SWCNT contacts using different thiolate molecules, methanethiol (CH₃SH) and trifluoroethanethiol (CF₃CH₂SH). Characterization has revealed that highly asymmetrical contacts with Schottky barrier heights of ∼190 and ∼40 meV (increased by over 70% and decreased by over 60%, respectively with respect to that of pristine Au/SWCNT contact of ∼110 meV) were achieved for the Au/SWCNT contacts modified by CH₃SH and CF₃CH₂SH, respectively. The performance of our SWCNT Schottky diodes is as follows: the forward and reverse current ratio (I_forward/I_reverse) higher than 10⁴, a forward current as high as ∼5 μA, a reverse leakage current as low as ∼100 pA, and a current ideality factor as low as ∼1.42. This is at least comparable to, if not better than SWCNT Schottky diodes fabricated with asymmetrical metals, where one contact is a metal with a work function lower than that of SWCNTs to yield a Schottky contact, while the other has a work function higher than that of SWCNTs to achieve an ohmic (more near ohmic) contact.     

Effect of bundling on the π plasmon energy in sub-nanometer single wall carbon nanotubes

Due to their unusual electronic and vibrational properties, single walled carbon nanotubes (SWCNTs) with sub-nanometer diameters d ∼ 0.5–0.9 nm have recently gained interest in the carbon community. Using UV–Vis–NIR spectroscopy and ultra-centrifugation, we have conducted a detailed study of the π plasmon energy (present at∼5–7 eV) in sub-nm SWCNTs as a function of the size of the bundle. We find that the energy of the π plasmon peak E varies with the bundle diameter D_h as E = (-0.023 eV)^∗ln(D_h/d_o) + 5.37 eV, where d_o = 0.5 nm and corresponds to the smallest tube diameter.¹ This is compared with the same data for HiPCo and Carbolex SWCNTs of larger diameter (1–1.4 nm) confirming a clear dependence of E on the bundle size, which is present in addition to the previously reported dependence of E on SWCNT diameter d.     

Mechanistic investigations of single-walled carbon nanotube synthesis by ferrocene vapor decomposition in carbon monoxide

The single-walled carbon nanotubes (SWCNTs) were synthesized by the carbon monoxide disproportionation reaction on Fe catalyst particles formed by ferrocene vapor decomposition in a laminar flow aerosol (floating catalyst) reactor. On the basis of in situ sampling of the product collected at different locations in the reactor, kinetics of the SWCNT growth and catalyst particle crystallinity were studied. Catalyst particles captured before SWCNT nucleation as well as inactive particles were determined to have cementite (Fe₃C) phase, while particles with γ- and α-Fe phases were found to be embedded in the SCWNTs. The growth rate in the temperature range from 804 to 915 °C was respectively varied from 0.67 to 2.7 μm/s. The growth rate constant can be described by an Arrhenius dependence with an activation energy of E_a = 1.39 eV, which was attributed to the carbon diffusion in solid iron particles. CNT growth termination was explained by solid-liquid phase transition in the catalyst particles. A high temperature gradient in the reactor was found to not have any effect on the diameter during the SWCNT growth and as a result on the chirality of the growing SWCNTs.     

Synthesis of semiconducting SWNTs by arc discharge and their enhancement of water splitting performance with TiO2 photocatalyst

A feasible and scalable CO₂-assisted arc discharge method was developed to directly synthesize single-walled carbon nanotubes (SWCNTs) with largely semiconducting species. Not only was electronic-type selectivity achieved on a large scale, with a semiconducting SWCNT (s-SWCNT) content of >90%, but also diameter selectivity was obtained, with a majority having diameters of >1.5 nm. The photo-catalytic water splitting performance of these SWCNTs with different ratios of s-SWCNTs to metallic single-walled carbon nanotubes (m-SWCNTs) was examined. The results show that, compared with m-SWCNTs, s-SWCNTs demonstrate a much better photocatalytic effect when used together with the common photo-catalyst TiO₂.     

Polyaniline/single-wall carbon nanotube (PANI/SWCNT) composites for high performance supercapacitors

PANI/SWCNT composites were prepared by electrochemical polymerisation of polyaniline onto SWCNTs and their capacitive performance was evaluated by means of cyclic voltammetry and charge-discharge cycling in 1 M H₂SO₄ electrolyte. The PANI/SWCNT composites single electrode showed much higher specific capacitance, specific energy and specific power than pure PANI and SWCNTs. The highest specific capacitance, specific power and specific energy values of 485 F/g, 228 W h/kg and 2250 W/kg were observed for 73 wt.% PANI deposited onto SWCNTs. PANI/SWCNT composites also showed long cyclic stability. Based upon the variations in the surface morphologies and specific capacitance of the composite, a mechanism is proposed to explain enhancement in the capacitive characteristics. The PANI/SWCNT composites have demonstrated the potential as excellent electrode materials for application in high performance supercapacitors.     

Synthesis of carbon nanotubes over gold nanoparticle supported catalysts

The synthesis of carbon nanotubes (CNTs) through the catalytic decomposition of acetylene was carried out over gold nanoparticles supported on SiO₂-Al₂O₃. Monodispersed gold nanoparticles with 1.3-1.8 nm in diameter were prepared by the liquid-phase reduction method with dodecanethiol as protective agent. The carbon products formed after acetylene decomposition consist of multi-walled carbon nanotubes with layered graphene sheets, carbon nanofilaments (CNFs), and carbon nanoparticles encapsulating gold particles. The observed CNTs have outer diameters of 13-25 nm under 850 °C. The influence of several reaction parameters, such as kind of carriers, reaction temperature, gas flow rate, was investigated to search for optimum reaction conditions. The CNTs were observed at a relatively low temperature (550 °C). The silica-alumina carrier showed higher activity for the formation of CNTs than others used in the screening test. With increasing temperature, the CNTs showed cured structures having thick diameters and inside compartments. When Au content on the support was over 5 wt.%, the gold nanoparticles coagulated to form large ones >20 nm in diameter and became encapsulated with graphene layers after decomposition of acetylene.     

Temperature and time dependence study of single-walled carbon nanotube growth by catalytic chemical vapor deposition

The temperature and time dependence of single-walled carbon nanotube (SWCNT) growth by chemical vapor deposition of ethanol on Fe₂O₃/MgO catalyst are compared at both low (∼27 Pa) and atmospheric pressure limits. SWCNTs are synthesized in two reactors with different geometries and operating pressures and are characterized by Raman spectroscopy. Both reactors show SWCNT growth within a relatively narrow temperature window of 700-850 °C, with an optimum growth time of 35 min for the cold wall reactor and 75 min for the quartz tube reactor. A kinetic model comprising of ethanol decomposition, SWCNT formation, and water etching is developed to better understand the growth mechanism. The existence of a temperature window and an optimum growth time in both reactors can be well described by the kinetic model. Simulation results suggest that the temperature and time dependence can be explained by the competition between the growth of SWCNTs and that of amorphous carbon.     

Super growth of vertically aligned SWCNTs using self-assembled nanoparticles from CoCrPtOx ultra-thin film

The self-assembly of catalytic nanoparticles by the decomposition of an as-deposited oxidized CoCrPt thin film is investigated, and the feasibility of its use in fabricating vertically aligned SWCNT films at a low synthesis temperature (∼600 °C) by microwave plasma CVD is described. The XPS results indicate that small nanoparticles with the diameters of 3-3.5 nm were formed in the explosion associated with the reduction of PtO₂ in the CoCrPtO_x film. Cr₂O₃ is employed to inhibit the agglomeration of nanoparticles and Co is typically involved in the dissolution and precipitation of carbon species for SWCNT growth. These small, self-assembled catalytic nanoparticles obtained from the CoCrPtO_x ultra-thin film can be used to fabricate an extremely dense and highly oriented SWCNT film on a silicon wafer at a temperature of ∼600 °C.     

Fluidized-bed synthesis of sub-millimeter-long single walled carbon nanotube arrays

The rapid growth method for vertically aligned, single walled carbon nanotube (SWCNT) arrays on flat substrates was applied to a fluidized-bed, using ceramic beads as catalyst supports as a means to mass produce sub-millimeter-long SWCNT arrays. Fe/Al₂O_x catalysts were deposited on the surface of Al₂O₃ beads by sputtering and SWCNTs were grown on the beads by chemical vapor deposition (CVD) using C₂H₂ as a feedstock. Scanning electron microscopy and transmission electron microscopy showed that SWCNTs of 2–4 nm in diameter grew and formed vertically aligned arrays of 0.5 mm in height. Thermogravimetric analysis showed that the SWCNTs had a catalyst impurity level below 1 wt.%. Furthermore, they were synthesized at a carbon yield as high as 65 at.% with a gas residence time as short as <0.2 s. Our fluidized-bed CVD, which efficiently utilizes the three-dimensional space of the reactor volume while retaining the characteristics of SWCNTs on substrates, is a promising option for mass-production of high-purity, sub-millimeter-long SWCNT arrays.