Optical properties of normal and carcinomatous bronchial tissue

To understand better the optical characteristics and autofluorescence properties of normal and carcinomatous bronchial tissue, we measured the absorption coefficient, scattering coefficient, and anisotropy factor from 400 to 700 nm. We made the measurements by using an integrating sphere with a collimated white-light beam to measure total reflectance and transmittance of samples. The unscattered transmittance of the samples was measured through polarized on-axis light detection. The inverse adding-doubling solution was utilized to solve the equation of radiative transfer and to determine the absorption coefficient and reduced scattering coefficient. The scattering coefficient and anisotropy factor were derived from the unscattered transmittance of the sample and the reduced scattering coefficient. The measured parameters allow us to simulate photon propagation in normal bronchial and tumoral tissue by using Monte Carlo modeling.     

Properties of a diffused photon-pair density wave in a multiple-scattering medium

A novel diffused photon-pair density wave (DPPDW) composed of correlated polarized photon pairs at different temporal frequencies and orthogonal linearly polarized states is proposed. A theory of DPPDWs is developed. A DPPDW selected by coherence gating and polarization gating that satisfies the diffusion equation has been verified experimentally. The sensitivity of amplitude and phase detection of the heterodyne signal has been improved by the properties of synchronized detection and common-path propagation of polarized pair photons in a multiple-scattering medium. Both reduced scattering coefficient micro2s' and absorption coefficient micro2alpha of the scattering medium in terms of the measured phase and amplitude of the heterodyne signal have been obtained. The detection sensitivity of micro2s' and micro2alpha and the properties of a DPPDW in a multiple-scattering medium are discussed and analyzed.     

Retrieval of the scattering and microphysical properties of aerosols from ground-based optical measurements including polarization. I. Method

A method has been developed for retrieving the scattering and microphysical properties of atmospheric aerosol from measurements of solar transmission, aureole, and angular distribution of the scattered and polarized sky light in the solar principal plane. Numerical simulations of measurements have been used to investigate the feasibility of the method and to test the algorithm's performance. It is shown that the absorption and scattering properties of an aerosol, i.e., the single-scattering albedo, the phase function, and the polarization for single scattering of incident unpolarized light, can be obtained by use of radiative transfer calculations to correct the values of scattered radiance and polarized radiance for multiple scattering, Rayleigh scattering, and the influence of ground. The method requires only measurement of the aerosol's optical thickness and an estimate of the ground's reflectance and does not need any specific assumption about properties of the aerosol. The accuracy of the retrieved phase function and polarization of the aerosols is examined at near-infrared wavelengths (e.g., 0.870 mum). The aerosol's microphysical properties (size distribution and complex refractive index) are derived in a second step. The real part of the refractive index is a strong function of the polarization, whereas the imaginary part is strongly dependent on the sky's radiance and the retrieved single-scattering albedo. It is demonstrated that inclusion of polarization data yields the real part of the refractive index.     

Comparison of methods for reducing the effects of scattering in spectrophotometry

Light scattering provides a problem in optical spectroscopy as the relationship between attenuation and absorption in the presence of scattering is nonlinear. Three simple methods of reducing the effects of scattering and hence returning to an approximately linear relationship are considered in this paper, namely, extracting light that has maintained its original polarization state through subtraction of orthogonal polarization states, use of an added absorber, and spatial filtering. These can all be applied relatively easily to conventional spectrophotometers. However, there is an inevitable trade-off between the accuracy of the measurement and the signal-to-noise ratio as scattered light is rejected from the detector. It is demonstrated that polarization subtraction is the most efficient technique at selecting weakly scattered photons from a scattered light background as it enables the relationship between attenuation and absorption coefficient to become more linear while maintaining a higher number of detected photons. In practical use, the drawback of polarization subtraction over added absorber and spatial filtering methods is that a large dc background light level is maintained, which contributes to a higher shot noise. This means that when the scattering coefficient is high (micros > or = 7 mm(-1)) the added absorber method offers better performance for shot noise limited detection.     

Imaging with diffusing light: an experimental study of the effect of background optical properties

The overall image quality and diagnostic potential of time-resolved transmittance imaging depend on sensitivity to optical contrast, capacity to discriminate scattering from absorption contributions, and spatial resolution. We have investigated experimentally the effects of the optical properties of the background medium on the overall image quality of optical imaging based on fitting the experimental data to the solution of the diffusion equation and on time gating. Images were acquired from phantoms with different background optical properties, while the optical contrast between inhomogeneities and background is kept constant. Data were collected every 0.2 cm over a 6 cm x 6 cm area from realistic tissue phantoms containing cylindrical inhomogeneities (1 cm high and 1 cm in diameter) embedded in a 5-cm-thick turbid slab. The optical coefficients of the background were varied in the ranges of 5-15 cm(-1) for transport scattering and 0.02-0.08 cm(-1) for absorption. The optical contrast for the inclusions was kept at values of -50% and +50% for the scattering and -75% and +300% for the absorption. The results show that both high scattering and high absorption are beneficial.     

Polarized light scattering by aerosols in the marine atmospheric boundary layer

The intensity and polarization of light scattered from marine aerosols affect visibility and contrast in the marine atmospheric boundary layer (MABL). The polarization properties of scattered light in the MABL vary with size, refractive index, number distributions, and environmental conditions. Laboratory measurements were used to determine the characteristics and variability of the polarization of light scattered by aerosols similar to those in the MABL. Scattering from laboratory-generated sea-salt-containing (SSC) [NaCl, (NH(4))(2) SO(4), and seawater] components of marine aerosols was measured with a scanning polarization-modulated nephelometer. Mie theory with Gaussian and log normal size distributions of spheres was used to calculate the polarized light scattering from various aerosol composition models and from experimentally determined distributions of aerosols in the marine boundary layer. The modeling was verified by comparison with scattering from distilled water aerosols. The study suggests that polarimetric techniques can be used to enhance techniques for improving visibility and remote imaging for various aerosol types, Sun angles, and viewing conditions.     

Ultrasound-modulated optical tomography of absorbing objects buried in dense tissue-simulating turbid media

Continuous-wave ultrasonic modulation of scattered laser light was used to image objects buried in tissue-simulating turbid media. The buried object had an absorption coefficient greater than the background turbid medium. The ultrasonic wave that was focused into the turbid media modulated the laser light that passed through the ultrasonic field. The modulated laser light that was collected by a photomultiplier tube reflected the local mechanical and optical properties in the zone of ultrasonic modulation. Objects buried in the middle plane of 5-cm-thick dense turbid media were imaged with millimeter resolution through the scanning and detecting alterations of the ultrasound-modulated optical signal. The optical properties of the dense turbid media included an absorption coefficient of 0.1 cm(-1) and a reduced scattering coefficient of 10 cm(-1) and were comparable with those of biological tissues in the visible and near-IR ranges. The dependence of the ultrasound-modulated optical signal on the off-axis distance of the detector from the optic axis and the area of the detector was studied as well.     

Optimal probe geometry for near-infrared spectroscopy of biological tissue

The results of this study clarify the influence of probe geometry on spectroscopic measurements obtained from the surface of a turbid biological tissue. We show that the transition between the measurement of the predominantly backward-propagating and the predominantly forward-propagating photon fluxes is marked by the separation between the source probe and the detector probes at which the dependence of the fluence on small changes in scattering coefficient vanishes. This is the probe separation at which a variable scattering background has the least influence on the measurement of optical absorption in turbid materials. Estimates of the optimum probe spacing for typical values of absorption and scattering coefficients of soft tissue in the near-infrared spectral region (800-2500 nm) are derived from an analytical solution of the diffusion equation. The estimates were verified by Monte Carlo simulations and experiments on particle suspensions with optical properties similar to those of skin tissue.     

Improving visibility depth in passive underwater imaging by use of polarization

Results are presented that demonstrate the effectiveness of using polarization discrimination to improve visibility when imaging in a scattering medium. The study is motivated by the desire to improve visibility depth in turbid environments, such as the sea. Most previous research in this area has concentrated on the active illumination of objects with polarized light. We consider passive or ambient illumination, such as that deriving from sunlight or a cloudy sky. The basis for the improvements in visibility observed is that single scattering by small particles introduces a significant amount of polarization into light at scattering angles near 90 degrees: This light can then be distinguished from light scattered by an object that remains almost completely unpolarized. Results were obtained from a Monte Carlo simulation and from a small-scale experiment in which an object was immersed in a cell filled with polystyrene latex spheres suspended in water. In both cases, the results showed an improvement in contrast and visibility depth for obscuration that was due to Rayleigh particles, but less improvement was obtained for larger scatterers.     

Multicomponent aerosol mass efficiency with various mixture types for polydispersed aerosol

Based on the filter-sampled chemical composition data the seasonal variation of the optical properties of polydispersed aerosols, extinction, scattering, and absorption coefficient, are estimated for various types of aerosol mixtures. The mixtures considered in this study are the internal mixture, elemental carbon (EC)/non-EC external mixture, and fully external mixture. This study also evaluated the sensitivity of the aerosol optical properties for different size distributions. The results show that the extinction coefficient can be mostly accounted for scattering and generally shows a good agreement with each mixture type in this case study. However, the absorption coefficient shows a different tendency for internal and external mixtures. This study also shows that the aerosol optical properties vary as a function of particle diameter at the same composition and mass concentration. This means that mass extinction, scattering, and absorption efficiencies, which were considered as constants in general, should be reassessed and more specifically described as a function of particle size.     

Linear dichroism of the retinal nerve fiber layer expressed with Mueller matrices

An electro-optic device is used that permits the measurement of polarized absorption spectra (linear dichroism). The change of the polarization state of a light beam brought about by passage through the optic elements of a dichrograph are described mathematically by a transformation of the Stokes vector. The polarization or absorption properties of the optical elements are described by the Mueller matrices. The dichroic properties of sheep retina and cornea are studied in vitro.     

Light scattering by an infinite circular cylinder immersed in an absorbing medium

Analytic solutions are developed for the single-scattering properties of an infinite dielectric cylinder embedded in an absorbing medium with normal incidence, which include extinction, scattering and absorption efficiencies, the scattering phase function, and the asymmetry factor. The extinction and scattering efficiencies are derived by the near-field solutions at the surface of the particle. The normalized scattering phase function is obtained by use of the far-field approximation. Computational results show that, although the absorbing medium significantly reduces the scattering efficiency, it has little effect on absorption efficiency. The absorbing medium can significantly change the conventional phase function. The absorbing medium also strongly affects the polarization of the scattered light. However, for large absorbing particles the degrees of polarization change little with the medium's absorption. This implies that, if the transmitting lights are strongly weakened inside the particle, the scattered polarized lights can be used to identify objects even when the absorption property of the host medium is unknown, which is important for both active and passive remote sensing.     

Diffuse optical tomography guided quantitative fluorescence molecular tomography

We describe a method that combines fluorescence molecular tomography (FMT) with diffuse optical tomography (DOT), which allows us to study the impact of heterogeneous optical property distribution on FMT, an issue that has not been systemically studied. Both numerical simulations and phantom experiments were performed based on our finite-element reconstruction algorithms. The experiments were conducted using a noncontact optical fiber free, multiangle transmission system. In both the simulations and experiments, a fluorescent target was embedded in an optically heterogeneous background medium. The simulation results clearly suggest the necessity of considering the absorption coefficient (mu(a)) and reduced scattering coefficient (mu'(s)) distributions for quantitatively accurate FMT, especially in terms of the accuracy of reconstructed fluorophore absorption coefficient (mu(a(x-->m))). Subsequent phantom experiments with an indocyanine green (ICG)-containing target confirm the simulation findings. In addition, we performed a series of phantom experiments with low ICG concentration (0.1, 0.2, 0.4, 0.6 and 1.0 microM) in the target to systematically evaluate the quantitative accuracy of our FMT approach. The results indicate that, with the knowledge of optical property distribution, the accuracy of the recovered fluorophore concentration is improved significantly over that without such a priori information. In particular absolute value of mu(a(x-->m) ) from our DOT guided FMT are quantitatively consistent with that obtained using spectroscopic methods.     

Ultraviolet-visible bulk optical properties of randomly distributed soot

The presence of soot in the lower stratosphere was recently established by in situ measurements. To isolate their contribution to optical measurements from that of background aerosol, the soot's bulk optical properties must be determined. Laboratory measurements of extinction and polarization of randomly distributed soot were conducted. For all soot, measurements show a slight reddening extinction between 400 and 700 nm and exhibit a maximum of 100% polarization at a scattering angle of 75 +/- 5 degrees. Such results cannot be reproduced by use of Mie theory assumptions. The different optical properties of soot and background stratospheric aerosol could allow isolation of soot in future analyses of stratospheric measurements.     

Influence of layered tissue architecture on estimates of tissue optical properties obtained from spatially resolved diffuse reflectometry

Most instruments used to measure tissue optical properties noninvasively employ data-analysis algorithms that rely on the simplifying assumption that the tissue is semi-infinite and homogeneous. The influence of a layered tissue architecture on the determination of the scattering and absorption coefficients has been investigated in this study. Reflectance as a function of distance from a point source for a two-layered tissue architecture that simulates skin overlying fat was calculated by using a Monte Carlocode. These data were analyzed by using a diffusion theory modelfor a homogeneous semi-infinite medium to calculate the scatter and absorption coefficients. Depending on the algorithm and the radial distance, the estimated tissue optical properties were different from those of either layer, and under some circumstances, physically impossible. In addition, the sensitivity and cross talk of the estimated optical properties to changes in input optical properties were calculated for different layered geometries. For typical optical properties of skin, the sensitivity to changes in optical properties is highly dependent on the layered architecture, the measurement distance, and the fitting algorithm. Furthermore, a change in the input absorption coefficient may result in an apparent change in the measured scatter coefficient, and a change in the in put scatter coefficient may result in an apparent change in the measured absorption coefficient.     

Fiber-optic probe for noninvasive real-time determination of tissue optical properties at multiple wavelengths

We present a compact, fast, and versatile fiber-optic probe system for real-time determination of tissue optical properties from spatially resolved continuous-wave diffuse reflectance measurements. The system collects one set of reflectance data from six source-detector distances at four arbitrary wavelengths with a maximum overall sampling rate of 100 Hz. Multivariate calibration techniques based on two-dimensional polynomial fitting are employed to extract and display the absorption and reduced scattering coefficients in real-time mode. The four wavelengths of the current configuration are 660, 785, 805, and 974 nm, respectively. Cross-validation tests on a 6 x 7 calibration matrix of Intralipid-dye phantoms showed that the mean prediction error at, e.g., 785 nm was 2.8% for the absorption coefficient and 1.3% for the reduced scattering coefficient. The errors are relative to the range of the optical properties of the phantoms at 785 nm, which were 0-0.3/cm for the absorption coefficient and 6-16/cm for the reduced scattering coefficient. Finally, we also present and discuss results from preliminary skin tissue measurements.     

Anisotropic third-order optical nonlinearity of a single ZnO micro/nanowire

We report a systematic study about the anisotropic third-order optical nonlinearity of a single ZnO micro/nanowire by using the Z-scan method with a femtosecond laser. The two-photon absorption coefficient and nonlinear refraction index, which are measured as a function of polarization angle and sample orientation angle, exhibit oscillation curves with a period of π/2, indicating a highly polarized optical nonlinearity of the ZnO micro/nanowire. Further studies show that the polarized optical nonlinearity of the ZnO micro/nanowire is highly size-dependent. The results indicate that ZnO nanowire has great potential in applications of nanolasers, all-optical switching and polarization-sensitive photodetectors.     

A target for precise Møller polarimetry

In order to achieve better accuracy on the measurement of electron beam polarization employing - scattering, we have developed an improved polarized electron target. Using a pure iron foil saturated out-of-plane in a 4 T magnetic field one can reduce the systematical errors to the promille level. Measurement of the relative target polarization using polarized light and the Kerr effect allows to observe on-line the change in target polarization due to heating by the electron beam.     

Scattering polarization by anisotropic biomolecules

The full polarization properties of anisotropic biomolecule optical scattering are investigated theoretically. By using a simple ellipsoid model of a single biomolecule, the scattering fields and Mueller matrices are derived from fundamental electromagnetism theory. The energy of scattered photons is not necessarily equal to that of the incident laser beam. This theory can be generally applied to the experiments of fluorescence, Raman scattering, and second-harmonic generation. Fitting of a single tetramethylrhodamine-labeled lipid molecule's anisotropic imaging experiment is demonstrated. This theory has provided a fundamental simulation analysis tool of understanding and developing the optical polarimetric sensing science and technology of the anisotropic biomolecules and biomedium. The medium dielectric constant of the model ellipsoid provides a theoretic background for correlating the optical polarization properties of a biomolecule to its microscopic electronic structure.     

Multiple-scattering effects on infrared scattering measurements used to characterize droplet size and volume fraction distributions in diesel sprays

We quantify the maximum error due to multiple-scattering effects for an infrared scattering droplet izing technique. Errors in Sauter mean diameters (SMDs) and liquid volume fractions were estimated lased on experimentally determined polarization properties of the scattered light. Light that is multiply scattered from spherical particles becomes randomly polarized, whereas singly scattered light from a spherical particle contains no cross-polarization scattering component. Therefore measurement of the cross-polarization component (in this case parallel) of the scattering signal is a measure of the multiply scattered light. A ratio of parallel to perpendicular polarized scattered light was experimentally determined and used to calculate an error due to multiple scattering. The infrared scattering measurements and polarization measurements used to quantify the multiple-scattering errors were applied to a typical diesel spray that was injected into three different background conditions: a room ambient condition; a room-temperature, high-pressure condition; and a combusting condition. Droplet SMD, liquid volume fraction, and multiple-scattering errors were determined for a number of locations within the spray; results indicate that the combusting case is negligibly affected by multiple scattering. However, the room ambient case exhibited notable errors due to multiple scattering near the centerline of the spray, and the high-pressure case demonstrated susceptibility to multiple scattering throughout all regions investigated. It is important to note, however, that multiple-scattering errors in many cases translate into relatively small effects on the reported droplet sizes.