Structure and properties of cellulose graft copolymers. I. Radiation-induced rayon–styrene graft copolymer

Rayon–styrene graft copolymers were prepared by the direct radiation method, with the use of the preswelling technique, by irradiation with γ-rays from ⁶⁰Co. The grafting was carried out in bulk styrene and in styrene–solvent mixtures, such as styrene–methanol and styrene–acetone, to study their effect on the graft copolymerization reaction and the structure of the resulting graft copolymer. The effects of carbon tetrachloride, a chain-transfer agent, was also investigated. Three different types of rayon yarn were used; Fortisan, a modifier-type high wet-modulus rayon, and a high-tenacity tire yarn, in order to study the effect of rayon microstructure on the grafting reaction. The molecular structure of the rayon–styrene graft copolymers was studied by hydrolyzing away the cellulose backbone and measuring the molecular weights of the grafted polystyrene branches. For grafting in bulk styrene, the molecular weights of the grafted polystyrene ranged from 400,000 to 1,000,000, while those of the polystyrene homopolymer formed in the outside solution were of the order of 30,000–50,000. The molecular weights of the grafted polystyrene branches tended to increase with per cent grafting in the graft copolymer. For grafting in styrene–methanol and styrene–acetone mixtures, the molecular weights of the polystyrene branches decreased with increasing solvent content. The addition of carbon tetrachloride to bulk styrene resulted in a sharp decrease in the molecular weights of the grafted branches. The grafting frequency or number of polystyrene branches per cellulose chain was calculated from the per cent grafting and the molecular weights of the polystyrene branches. The morphology of the rayon–styrene graft copolymers and some of their physical properties are discussed.     

Structure and properties of cellulose graft copolymers. II. Cellulose–styrene graft copolymers synthesized by the ceric ion method

Styrene was graft-copolymerized onto wood cellulose by the ceric ion method of Mino and Kaizerman. The grafting reaction was found to depend strongly on the concentration of ceric ion in the grafting system and maximum grafting occurred in a narrow range of concentration of initiator, 1.0 × 10^?3-1.8 × 10^?3 mol/l, at 58 ± 1°C. A pretreatment technique, developed to enhance the monomer diffusion into cellulose, was found to increase the grafting considerably. The structures of the cellulose-styrene graft copolymers were studied by hydrolyzing away the cellulose backbone to isolate the grafted polystyrene branches. The molecular weight and the molecular weight distributions of the grafted polystyrene were determined using gel permeation chromatography. The number-average molecular weight (M?_n) ranged from 23,000 to 453,000 and the polydispersity ratios (M?_w/M?_n) varied from 2.5 to 8.0. The grafting frequencies calculated from the per cent grafting and molecular weight data were of the order of 0.05–0.4 polystyrene branches per cellulose chain.     

Characterization of products prepared by homogeneous grafting of styrene onto cellulose in a sulfur dioxide–diethylamine–dimethyl sulfoxide medium

Homogeneous graft copolymerization of styrene onto cellulose was carried out using a SO₂–DEA–DMSO cellulose solvent reaction medium and γ-ray mutual irradiation. The yield of grafted side chain polymer and the homopolymer in this reaction system proved to be polysulfone, a styrene–sulfur dioxide copolymer in which the number of sulfur atoms per polymer chain is 3–3.5. Several characterizations of the graft product were attempted. The graft products were extracted with boiling benzene for 24 hr to remove homopolymer, and then the cellulose backbones were hydrolyzed. After hydrolysis, the polysulfone residues were separated by thin-layer chromatography (TLC) into two components, i.e., attendant homopolysulfone and the true side chain polysulfone having some sugar residues at one of the polymer chain ends. The weight fraction of these components for each graft product was determined by a TLC scanner. The molecular weight of the side chain polysulfone remained constant and significantly lower than that of the homopolysulfone throughout the reaction period. By assuming that no scission of cellulose chains occurred throughout the graft reaction, the number of branches per starting cellulose molecule was assessed to be surprisingly large, ranging from 2.4 to 10.6 at a total dose of 1–8 mR of irradiation. It was also found that percent grafting increased with irradiation time because of an increase in the number of branches per cellulose chain. Furthermore, we succeeded in separating the graft product into ungrafted cellulose and the true graft copolymer containing a small amount of attendant hompolysulfone.     

Graft copolymers prepared by atom transfer radical polymerization (ATRP) from cellulose

A cellulose-based macro-initiator, cellulose 2-bromoisobutyrylate, for atom transfer radical polymerization (ATRP) was successfully synthesized by direct homogeneous acylation of cellulose in a room temperature ionic liquid, 1-allyl-3-methylimidazolium chloride, without using any catalysts and protecting group chemistry. ATRP of methyl methacrylate and styrene from the macro-initiator was then carried out. The synthesized cellulose graft copolymers were characterized by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The grafted PMMA and PS chains were obtained by the hydrolysis of the cellulose backbone and analyzed by GPC. The results obtained from these analytical techniques confirm that the graft polymerization occurred from the cellulose backbone and the obtained copolymers had grafted polymer chains with well-controlled molecular weight and polydispersity. Through static and dynamic laser light scattering and TEM measurements, it was found that the cellulose graft copolymer in solution could aggregate and self-assembly into sphere-like polymeric structure.     

Grafting of partially hydrolysed poly(methyl methacrylate) onto mesylated cellulose acetate

A new synthetic route to cellulose graft polymers by nucleophilic displacement of mesylate groups from mesyl cellulose acetate (MCA) by the polystyrylcarboxylate anion has been recently reported by us. This approach to cellulosic graft polymers overcomes the drawbacks of the radical polymerization methods and allows for precise control of parameters such as the molecular weight and molecular weight distribution of the grafted side chains, higher degree of substitution on the cellulose backbone, the number and nature of grafted side chains and overall better control and reproducibility of the grafting process. In this report, partially hydrolysed poly(methyl methacrylate) was successfully grafted on to mesylated cellulose acetate in excellent yields by nucleophilic displacement of mesylate groups in less than 60 min at 75°C.     

Behavior of cellulose graft copolymer towards persulphate oxidation. III. Poly(acrylonitrile) graft copolymers

Cotton cellulose was graft copolymerized with poly(acrylonitrile) to different levels. The copolymers so obtained together with the nongrafted cellulose were oxidized at different pH's (4–10) and temperatures (50–70°C) with potassium persulphate. The oxidation reaction was studied with respect to oxygen consumption, mass loss, and changes in copper number and carboxyl content of the cellulosic materials. It was found that the rates of oxidation at pH 4 for the copolymers are substantially higher than that of the nongrafted cellulose and the rate of oxidation is higher the higher the level of grafting. The reverse is the case at pH 10. The mass loss increases as the oxygen consumption increases irrespective of the substrate used and the pH employed. The magnitude of the mass loss is substantially lower in the case of grafted cellulose than in the case of nongrafted cellulose. The cellulosic copolymers with higher graft levels show lower mass loss than those having lower graft levels. However, the copper number and carboxyl content of the oxidized grafted cellulose are higher than those of the nongrafted cellulose at the same oxygen consumption. It is believed that the presence of poly(acrylonitrile) graft in the molecular structure of cellulose impedes cellulosic chain scission without necessarily preventing oxidation of cellulose hydroxyls.     

Peroxydiphosphate–metal ion–cellulose thiocarbonate redox system‐induced graft copolymerization of vinyl monomers onto cotton fabric

The grafting of methacrylic acid (MAA) and other vinyl monomers onto cotton cellulose in fabric form was investigated in an aqueous medium with a potassium peroxydiphosphate–metal ion–cellulose thiocarbonate redox initiation system. The graft copolymerization reaction was influenced by peroxydiphosphate (PP) concentration, the pH of the reaction medium, monomer concentration, the duration and temperature of polymerization, the nature of vinyl monomers, and the nature and concentration of metallic ions (activators). On the basis of a detailed investigation of these factors, the optimal conditions for the grafting of MAA onto cotton fabric with the said redox system were as follows: [Fe²⁺] = 0.1 mmol/L, [PP] = 2 mmol/L, [MAA] = 4%, pH‐2, grafting time = 2 h, grafting temperature = 70°C, and material/liquor ratio = 1 : 50. Under these optimal conditions, the graft yields of different monomers were in the following sequence: MAA ? acrylonitrile > acrylic acid > methyl acrylate > methyl methacrylate. The unmodified cellulosic fabric (the control) had no ability to be grafted with MAA with the PP–Fe²⁺ redox system. The percentage of grafting onto the thiocarbonated cellulosic fabric was more greatly enhanced in the presence of iron salts than in their absence. This held true when the lowest concentrations of these salts were used separately. A suitable mechanism for the grafting processes is suggested, in accordance with the experimental results. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1879–1889, 2003     

Graft copolymers of starch–polyacrylonitrile prepared by ferrous ion–hydrogen peroxide initiation

The effect of concentration, reactant ratios, temperature, and starch pretreatment on grafting of acrylonitrile onto starch were studied. Grafting was efficient at high concentrations (8–12% starch) when granular starch was used. The molecular weights for grafted polyacrylonitrile (PAN) were higher when gelatinized starch was used, but grafting efficiencies (grafted PAN/total PAN) were much lower. The molecular weight of the grafted side chain increased with increased concentration of reactants. The grafting frequency was highest when the reaction mixture was kept at 5°C and decreased with increased swelling of the starch. The starch–polyacrylonitrile graft copolymers were saponified and dried to give products which absorbed 75–440 ml H₂O per gram and 20–70 ml synthetic urine per gram.     

Molecular weights of grafted polystyrene onto γ-preirradiated cellulose diacetate

The behavior of molecular weights of grafted polystyrene onto γ-preirradiated cellulose diacetate was studied. The grafting of styrene onto cellulose diacetate was kinetically followed with particular attention paid to the polystyrene molecular weight behavior. The molecular weight was evaluated with the polymer fractions obtained by acid hydrolysis of the grafted copolymer. From the experimental results it appeared that the grafted chain molecular weight is completely controlled by the physical properties of the polymeric matrix either during a “bulk” or a “front” grafting.     

Preparation of cellulosic drug‐loaded hydrogel beads through electrostatic and host–guest interactions

Cyclodextrin‐grafted cellulosic hydrogel beads (CD⁺@HEC‐CMC‐gel) were prepared through electrostatic and host–guest interactions. β‐Cyclodextrin (CD⁺) modified with quaternary ammonium groups was used as the electropositive binding site, and carboxymethyl cellulose (CMC) in a double‐network hydrogel structure was used as the electronegative binding site. The double‐network structure was obtained by controlling the crosslinking of CMC and hydroxyethyl cellulose (HEC) in the presence of epichlorohydrin. The electrostatic interaction was used to graft CD⁺ onto the electronegative double‐network structure. Scanning electron microscopy indicated an obvious change in the cellulosic double network after grafting of CD⁺. The grafting content of CD⁺ in CD@HEC‐CMC‐gel is determined as 93.10 ± 0.74% by the photometric titration method. In order to evaluate the assembling and releasing ability, ibuprofen (IBU) was selected to be encapsulated in CD⁺@HEC‐CMC‐gel by host–guest interaction. In addition, the release of IBU by the hydrogel beads was explained by several kinetic models. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46593.     

Vinylic graft copolymers of cellulose. I. Effects of monomer concentrations and crystallinity index of cellulosic substrate on grafting vinyl acetate onto cotton

Graft copolymerization of vinyl acetate (VA) and methyl acrylate (MA) on cotton cellulose was initiated by the Ce (IV) ion, and ungrafted vinylic polymer was separated from the graft copolymer by acetone extraction. The influence of the ratio aqueous initiator solution volume/monomeric volume (V_aq/V_mon), vinyl acetate volume/methyl acrylate volume (V_VA/V_MA), and the cellulose crystallinity index (CI) on the grafting reaction were studied. To modify the crystallinity of cellulose, native cotton was treated with NaOH in the concentrations 10, 15, and 20% (mercerized). The viscosimetric average molecular weight (M_v), the polymerization degree (PD), and the crystallinity index proposed by Nelson and O'Connor (CI) were determined for native and NaOH-treated cotton. The polymeric side chains grafted were separated from the cellulose backbone by acid hydrolysis in 72% H₂SO₄. The viscosimetric average molecular weight (M_v) was determined, and the number of vinylic chains per cellulosic chain (graft frequency, GF) were calculated. The grafting percentage, %G, was higher for most amorphous cellulose and for a higher methyl acrylate percentage (%MA) in monomeric reaction mixtures (VA-MA). The V_aq/V_mon ratio that yields the highest %G was 70/30. The increase of the %G with the %MA in the VA–MA monomeric mixture seems to be due to both an increase in the length of vinylic grafted chains (as shown by its M_v) and the number of grafted chains (GF). The increase in the %G when the crystallinity index (CI) of the cellulosic substrate decreases seems to be due to an increase in the length of the vinylic grafted chains, but not to an increase in the number of grafted chains, since the M_v increases and GF decreases when the CI of cellulose decreases.     

Studies on the ability of cellulosic materials to initiate graft copolymerization

The activity to initiate graft copolymerization was investigated for various cellulose samples. Oxidation of the sample with hydrogen peroxide or sodium hypochlorite indicated a remarkable increase in the per cent grafting as well as the number of grafts. This phenomenon must be attributed to the formation of special reactive groups in cellulosic materials. However, the treatment with hot water caused a definite decrease in the per cent grafting or the number of grafts for the graft copolymerization on the sample, indicating a lower activity to initiate graft copolymerization. Accordingly, the reactive groups, once formed on the sample by oxidation, seemed to be easily decomposed by hot water. The ferric ion adsorbed on cellulose increased the per cent grafting and accelerated the formation of grafts, and the contribution of metallic ions to the initiation was recognized as one of the important factors of graft copolymerization.     

Graft copolymers of starch with mineral acid salts of dimethylaminoethyl methacrylate. Preparation and testing as flocculating agents

Mineral acid salts of dimethylaminoethyl methacrylate (DMAEMA) have been graft polymerized onto starch with ferrous ammonium sulfate–hydrogen peroxide initiation. The nitric acid salt was used in most reactions, and graft polymerizations were run in both water and aqueous–organic solvent systems. Increased monomer concentration in water led to an increase in both the percentage of poly(DMAEMA · HNO₃) in the graft copolymer (percent add-on) and the molecular weight of grafted branches. Variations in initiator concentration altered the percent add-on only slightly but affected the molecular weight of grafted polymer significantly. When swollen starch, in contrast with unswollen starch was used in graft polymerization reactions run in water, the product had a higher per cent add-on and a larger number of grafted branches of lower molecular weight. The efficiency of starch–poly(DMAEMA · HNO₃) graft copolymers as flocculants for diatomaceous silica increased with per cent add-on; however, variations in grafting frequency and graft molecular weight had less effect on the behavior of these materials as flocculants.     

Grafting of acrylic monomers onto cotton fabric using an activated cellulose thiocarbonate–azobisisobutyronitrile redox system

The feasibility of a cellulose thiocarbonate–azobisisobutyronitrile (AIBN) initiation system to induce graft copolymerization of methyl methacrylate (MMA) and other acrylic monomers onto cotton fabric was investigated. Other acrylic monomers were acrylic acid, acrylonitrile, and methyl acrylate. The initiation system under investigation was highly activated in the presence of a metal‐ion reductant or a metal‐ion oxidant in the polymerization medium. A number of variables in the grafting reaction were studied, including AIBN concentration, pH of the polymerization medium, nature of substrate, monomer concentration, duration and temperature of polymerization, and composition of the solvent/water polymerization medium. The solvents used were methanol, isopropanol, 1,4‐dioxane, cyclohexane, benzene, dimethyl formamide, and dimethyl sulfoxide. There were optimal concentrations of AIBN (5 mmol/L), MMA (8%), Fe²⁺ (0.1 mmol/L), Mn²⁺ (8 mmol/L), and Fe³⁺ (2 mmol/L). A polymerization medium of pH 2 and temperature of 70°C constituted the optimal conditions for grafting. The methanol/water mixture constituted the most favorable reaction medium for grafting MMA onto cotton fabric by using the Fe²⁺–cellulose thiocarbonate–AIBN redox system. MMA was superior to other monomers for grafting. The unmodified cotton cellulose showed very little tendency to be grafted with MMA compared with the chemically modified cellulosic substrate. A tentative mechanism for the grafting reaction was proposed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1261–1274, 2004     

Characterization of the collagen–vinyl graft copolymers prepared by the ceric ion method. II. Infrared spectra and electron microscopy

Collagen powder and goat skins were grafted with different vinyl monomers using the ceric ion technique. The graft copolymers were characterized by infrared spectra and electron microscopy. The collagen–vinyl graft copolymers were hydrolyzed by both acid and enzymatic hydrolysis, and the grafted vinyl polymer side chains were isolated. In the grafted poly(methyl methacrylate) (PMMA) side chains isolated by acid hydrolysis, the characteristic amide absorption bands at 1550 and 1660 cm^?1 were not seen prominently. However, in PMMA side chains isolated by enzymatic methods, the amide absorption bands were more prominent as these isolated side chain polymers contained longer fragments of the peptide backbone attached to them. Electron-microscopic observations of grafted collagen fibrils and ultrathin sections of grafted goat skin fibrils did not show any cross-striations. These various evidences indicate that the polymers formed on collagen have penetrated into the fibrils and that they were chemically bound to the collagen molecules.     

Grafting of methyl methacrylate to nitrocellulose by ceric ions

Studies were carried out on grafting of various vinyl monomers to nitrocellulose by ceric ions. It was observed that graft copolymerization occurred only with methyl methacrylate (MMA) and methyl acrylate monomer. The variables such as initiator concentration, monomer concentration, time of grafting, and nitrocellulose content on grafting of MMA are discussed. By hydrolyzing away the nitrocellulose backbone, the grafted poly(methyl methacrylate) branches were isolated and the >c?o peak at 1740 cm^?1 in the infrared spectra of these isolated branches gave definite evidence of grafting. The molecular weight of isolated branches has been determined by viscometry. The probable mechanism of grafting may be at the α-carbon atom of primary alcohol or at a C₂-C₃ glycol group of the anhydro glucose unit or at the hemiacetal group of the end unit of nitrocellulose, as nitrocellulose is formed by the partial nitration of cotton cellulose.     

Fine structure of cellophane–acrylamide graft copolymer by the ceric ion method

The relationship between the grafting yield and the structure of graft copolymer is studied by measuring the branched chain lengths, the number of branches, the crystallinities, and the diffraction intensities of the (101) and (101 ) + (002) planes determined by x-ray diffraction, and the distribution of branched polymers, observed by interferometry. Over a relatively wide range of grafting yield the number of initiating sites is almost constant and about 1–2 per 2 moles of cellulose chain. Therefore, the increase of grafting yield seems to be due mainly to the propagation of branched polymers. Branched polymers are assumed to be formed in cellulose crystallites both on the normal (101) planes and in the amorphous regions of cellulose. It is found that branched polymers grow from the outer layer into the inner part of the film as the grafting yield increases. At more than 250% of grafting yield, however, branched polymers are uniformly formed throughout the layer of film in which the crystalline regions of cellulose are gradually destroyed. This result agrees with the dimensional change of gel film during the reaction. The temperature dependence of tensile strength and elongation and the wet strength of graft copolymer are also investigated. At higher grafting yields, such as 250%, the crystalline structure of cellulose is disturbed by the formation of branched polymer, and no improvement in waterproofness can be expected from grafting; the secondary bonding between branched polymers may be presumed to be same as those among cellulose. In addition, the fine cracking of the film in the burst state is found to appear more easily as the grafting yield increases, in which the aggregating state of cellulose is recognized to be changed by the formation of branched polymer.     

Grafting of nanospherical PMMA brushes on cross-linked PMMA nanospheres for addition in two-solution bone cements

Poly(methyl methacrylate) (PMMA) brushes were grafted to the surface of cross-linked PMMA nanospheres for use as the polymer phase in the preparation of the two-solution bone cement. PMMA chains grafted on the core of the cross-linked PMMA nanostructures were hypothesized to impart viscosity to the cement mixture, while providing entanglements with the matrix chains formed during cement cure. The first goal of this study was to develop a novel synthetic strategy to decorate the surface of nanoparticles with functional groups that allowed for grafting of PMMA brushes via radical polymerization. The grafting reactions were performed at specific combinations of monomer and initiator to produce a range of molecular weights adequate for the preparation of bone cements. The second goal was to investigate the ability of this novel methodology to produce high graft densities on the core surface from the analysis of the hydrodynamic properties of brushes. The synthetic pathway discussed enabled the synthesis of brushes with high graft densities and molecular weights tuned to provide optimal viscosities for preparation of brush-containing two-solution bone cements.     

Optimized conditions for the grafting reaction of poly(methyl methacrylate) onto oil‐palm empty fruit bunch fibers

This article describes the graft copolymerization of poly(methyl methacrylate) (PMMA) onto oil‐palm empty fruit bunches (OPEFBs) with a fiber length of less than 75 μm. The graft copolymerization was carried out under a nitrogen atmosphere by a free‐radical initiation technique in an aqueous medium. Hydrogen peroxide and ferrous ions were used as a redox initiator/cocatalyst system. The PMMA homopolymer that formed during the reaction was removed from the grafted copolymers by Soxhlet extraction. Determining the effects of the reaction period, reaction temperature, and monomer concentration on the grafting percentage was the main objective, and they were investigated systematically. The optimum reaction period, reaction temperature, monomer concentration, and initiator concentration were 60 min, 50°C, 47.15 × 10^?3 mol, and 3.92 × 10^?3 mol, respectively. The maximum percentage of grafting achieved under these optimum conditions was 173%. The presence of PMMA functional groups on OPEFB and the enormous reduction of the hydroxyl‐group absorption band in PMMA‐g‐OPEFB spectra provided evidence of the successful grafting reaction. The improvement of the thermal stability of PMMA‐g‐OPEFB also showed the optimal achievement of the grafting reaction of PMMA onto OPEFB. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation,characterization, and properties of cellulose–polyacrylamide graft copolymers

Graft copolymers of acrylamide on cellulose materials (α‐cellulose 55.8%, DP 287.3) obtained from Terminalia superba wood meal and its carboxymethylated derivative (DS 0.438) were prepared using a ceric ion initiator and batch polymerization and modified batch polymerization processes. The extent of graft polymer formation was measured in graft level, grafting efficiency, molecular weight of grafted polymer chains, frequency of grafting as a function of the polymerization medium, and initiator and monomer concentrations. It was found that the modified batch polymerization process yielded greater graft polymer formation and that graft copolymerization in aqueous alcohol medium resulted in enhanced levels of grafting and formation of many short grafted polymer chains. Viscosity measurements in aqueous solutions of carboxymethyl cellulose‐g‐polyacrylamide copolymer samples showed that interpositioning of polyacrylamide chains markedly increased the specific viscosity and resistance to biodegradation of the graft copolymers. The flocculation characteristics of the graft copolymers were determined with kaolin suspension. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 913–923, 2003