Synthesis and characterization of pH- and temperature-sensitive hydrogel of N-isopropylacrylamide/cyclodextrin based copolymer

A reactive β-Cyclodextrin (β-CD) based monomer carrying vinyl carboxylic acid functional groups was synthesized via reaction of β-CD with maleic anhydride (MAH) in N,N-dimethylformamide (DMF) at 80 °C. By copolymerization of the monomer with N-isopropylacrylamide (NIPA), a novel hydrogel, poly(NIPA-co-MAH-β-CD) with pH and temperature sensitivities plus molecular inclusion function, was obtained using free radical polymerization in aqueous solution. The hydrogel's composition was determined by element analysis and infrared spectroscopy. Equilibrium swelling ratio (ESR) of hydrogels was tested under different environment of pH, temperature and ionic strength. The results indicated that ESR of hydrogels presents marked variations following the change of experimental conditions used.     

Synthesis and properties of thermosensitive, crown ether incorporated poly(N-isopropylacrylamide) hydrogel

A crown ether derivative (4′-allyldibenzo-18-crown-6, CE) was covalently incorporated into the network of temperature sensitive poly(N-isopropylacrylamide) (PNIPA) hydrogels by copolymerization in a mixed solvent of water and tetrahydrofuran (H₂O/THF). The poly(N-isopropylacrylamide-co-4′-allyldibenzo-18-crown-6) (poly(NIPA-co-CE)) hydrogels exhibited dramatically faster deswelling rates than normal PNIPA hydrogels at a temperature (50 °C) above their lower critical solution temperatures. The effect of the solvent component ratio in the mixed solvent during the copolymerization on the swelling properties of the poly(NIPA-co-CE) hydrogel was investigated. The thermosensitive poly(NIPA-co-CE) hydrogels have potential applications in the extraction of cations and separation of chiral drugs.     

Photo cross-linkable poly(N-isopropylacrylamide) copolymers III: micro-fabricated temperature responsive hydrogels

Micro-fabricated temperature responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels were produced by photolithographic patterning of photo cross-linkable polymers. These polymers were synthesized by copolymerization of N-isopropylacrylamide (NIPAAm) and 2-(dimethyl maleimido)-N-ethyl-acrylamide (DMIAAm). The patterning process of polymers with 9.2 mol% DMIAAm and film thickness below 5 μm in the dry state was able to depict a lateral resolution of 4 μm with insignificant shape change. In order to increase the adhesion of the swollen hydrogels, and thus, the resolution of a particular pattern, a special adhesion promoter based on a monochlorosilane anchor group and a chromophore head group was synthesized. If a silicon wafer surface was pretreated with the adhesion promoter, the structures were stable and well adhered even at lower cross-linking densities. The hydrogels are suitable as working substances for micro-actuators because of their thermally induced volume changes. The swelling ratio of the pattern at low temperatures increased with a decreased cross-linking density. As expected from the chemical composition of the gels, the phase transition temperature (T_c) decreased with increasing DMIAAm content. The swelling of microstructures in water in comparison to macroscopic objects occured significantly faster. This behavior was attributed to the small gel dimension but it was even more pronounced because of the sponge-like nanostructure of the hydrogels characterized by high-resolution field emission scanning electron microscopy. Suitable applications of these hydrogels are adjusting limbs in fluid micro-systems such as micro-pumps and micro-valves.     

Swelling and mechanical behavior of poly(N-isopropylacrylamide)/Na-montmorillonite layered silicates composite gels

Clay-polymer hydrogel composites have been synthesized based on poly(N-isopropylacrylamide) (PNIPAM) gels containing 0.25-4 wt% of the expandable smectic clay Na-montmorillonite layered silicates (Na-MLS). The morphology of the composite gels has been studied using a polarized optical microscope. The size of Na-MLS aggregates increases with Na-MLS concentration. The swelling ratio of the Na-MLS/PNIPAM composite in water is increased at the low Na-MLS concentration but decreases as the concentration increases. Correspondingly, the shear modulus of the gel is found to exhibit a distinct minimum against clay concentration. For Na-MLS concentrations ranging from 2.0 to 3.2 wt%, the composite gels have larger swelling ratio and stronger mechanical strength than those for a pure PNIPAM. The presence of Na-MLS does not affect the value of the lower critical solution temperature (LCST) of the PNIPAM. However, the gel volume change at the LCST is first increased and then decreased upon the increase of the Na-MLS. No pH induced phase transition is observed for the Na-MLS/PNIPAM composites. The experimental results can be explained by considering that Na-MLS is physically entrapped inside rather than chemically bonded into the gel.     

Hydrogen-bond-assisted isotactic-specific radical polymerization of N-isopropylacrylamide with pyridine N-oxide

Radical polymerization of N-isopropylacrylamide (NIPAAm) in CHCl₃ at low temperatures in the presence of pyridine N-oxide (PNO) was investigated. An isotactic poly(NIPAAm) with meso diad content of 61% was successfully prepared at −60 °C in the presence of a two-fold amount of PNO. Thermodynamic analysis suggested that the isotactic-specificity was entropically induced, probably due to conformational fixation near the propagating chain-end through coordination by PNO.     

Direct synthesis of syndiotactic-rich poly(N-isopropylacrylamide) via radical polymerization of hydrogen-bond-complexed monomer

Radical polymerization of N-isopropylacrylamide (NIPAAm) in toluene was investigated in the presence of hexamethylphosphoramide (HMPA). We succeeded in directly preparing syndiotactic-rich poly(NIPAAm), the syndiotacticity of which (r=70%) is the highest among those of radically-prepared poly(NIPAAm)s so far reported, by lowering polymerization temperature to −60 °C in the presence of a two-fold amount of HMPA. The NMR analysis revealed that the induced syndiotactic-specificity was ascribed to 1:1 complex formation between NIPAAm and HMPA. Furthermore, thermodynamic analysis described that the induced syndiotactic-specificity was enthalpically achieved.     

Heterotactic poly(N-isopropylacrylamide) prepared via radical polymerization in the presence of fluorinated alcohols

Radical polymerization of N-isopropylacrylamide in toluene at −40 °C in the presence of fourfold amounts of fluorinated alcohols was investigated. The ¹³C NMR analysis of the obtained polymers suggested that the addition of fluorinated alcohols induced heterotactic specificity in radical polymerization of NIPAAm, although syndiotactic poly(NIPAAm)s were obtained by adding alkyl alcohols as we have previously reported. To the best of our knowledge, this is the first synthesis of heterotactic poly(NIPAAm).     

Dynamic swelling of hydrogels based on random terpolymers of N-isopropylacrylamide, methacrylic acid and poly(ethylene glycol) macromonomer

A series of pH-responsive hydrogels based on N-isopropylacrylamide (N-iPAAm), methacrylic acid (MAA) and poly(ethylene glycol) monomethyl ether monomethacrylate macromonomer (PEGMEMA), P(N-iPAAm-co-MAA-co-PEGMEMA) random terpolymers, were synthesized and their swelling behaviour studied as a function of both monomer composition and previous swelling treatment. The swelling kinetic curves were followed using gravimetric, photographic and magnetic resonance imaging (MRI) techniques, which provide spatial and temporal resolution. The swelling behaviour was non-Fickian at pH 7, being this fact more relevant when the samples were pre-soaked in pH 2 solution. Low pH promotes hydrogen bond arrangements that disrupt at pH 7, where sigmoidal swelling curves were observed. The sigmoidal shape of the curves increases as well as the swelling time with increasing N-iPAAm/PEGMEMA ratio. This indicates that hydrogen bond arrangements between MAA and N-iPAAm are stronger that those formed by MAA and PEGMEMA. The influence of the polymer composition on the hydrogen bond arrangements was also studied from the swelling kinetics curves at different pH media, observing that the swelling rate, the swelling curve shape and the whole amount of water absorbed were clearly dependent on this parameter.     

Thermosensitive poly(N-isopropylacrylamide) nanocapsules with controlled permeability

In this paper, novel thermosensitive poly(N-isopropylacrylamide) (PNIPAM) nanocapsules with temperature-tunable diameter and permeability are reported. Firstly, the core-shell composite microparticles were synthesized by precipitation polymerization with isothiocyanate fluorescein (FITC) entrapped SiO₂ as core and cross-linked PNIPAM as shell. Then, the SiO₂ core was etched by hydrofluoric acid at certain condition and the pre-trapped FITC molecules remained within the inner cavity. The FITC release profile and TEM studies clearly indicate that the release behavior of FITC could be controlled effectively by the external temperature. Above the LCST of PNIPAM (32 °C), the dehydrated PNIPAM shell inhibited the release of FITC from the internal cavity while below its LCST, the fluorophore could permeate the swollen shell easily.     

pH-Controlled association of PEG-containing terpolymers of N-isopropylacrylamide and 1-vinylimidazole

Temperature- and pH-controlled association of terpolymers of N-isopropylacrylamide (NIPA) with 1-vinylimidazole (VI) and polyethylene glycol (PEG) has been investigated by light scattering and atomic force microscopy (AFM) in situ. The polymers contained 0-15 mol% VI and 0-2 mol% PEG. The phase transition temperatures (T_p) have been in the range of 32-45 °C and exhibited significant dependence on the pH of solution in the pH range between 5 and 8. The T_p of the polymers increased with increasing VI content and with decreasing pH, confirming major effect of VI ionization status on T_p. The presence of PEG grafts in the polymer structure had augmenting effect on the magnitude of pH-responsiveness and on the pH-independent colloidal stability of the polymer particles formed above T_p. Incorporation of VI into the polymer structure had similar, but pH-dependent effect on colloidal stabilization of the polymer particles. The size of the particles formed after the phase transition is driven by the association of the collapsed NIPA segments in the globule conformation and it decreased with decreasing pH. The phase transition temperature of the polymers could be adjusted to increase from temperatures below, to temperatures above body temperature upon decreasing pH from 7 to 6, suggesting that such polymers could provide a material platform for a variety of biomedical applications. AFM analysis in situ showed a fully reversible formation of particles in the solutions of the polymers above their T_p.     

Poly(N-isopropylacrylamide) hydrogels with improved shrinking kinetics by RAFT polymerization

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of N-isopropylacrylamide (NIPAM) in the presence of N,N-methylenebisacylamide (BIS) as a cross-linker and 4-cyanopentanoic acid dithiobenzoate as chain transfer reagent (CTA). The swelling behaviors were investigated and the hydrogels by RAFT polymerization (RAFT gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains mainly caused by CTA, which could retard the crosslinking reaction rate greatly. Another CTA, 3-(trithiocarbonyl) propanoic acid, was adopted to further investigate the effect of CTA. It showed the similar effect except the different accelerated degree to the shrinking kinetics. Furthermore, the living character of the RAFT process was used to polymerize a new batch of monomer (NIPAM) from functional RAFT gels to introduce grafted structure. The PNIPAM-g-PNIPAM hydrogels indicted further accelerated shrinking kinetics than functional backbone hydrogels.     

Photosensitive copolymer of N-isopropylacrylamide and methacryloyl derivative of spyrobenzopyran

The copolymer of N-isopropylacrylamide (NIPAM) and methacryloyl derivative of spirobenzopyran (MSBP) with a molecular weight of 21?000 g/mol and the average molar MSBP content of 1.9% was prepared by free radical polymerization. The copolymer displayed its phase transition in water in the temperature range of 30-50 °C. UV irradiation of its aqueous solution caused photoinduced transformation of MSBP units into their coloured merocyanine forms, while the cloud point of the irradiated copolymer shifted by ca. 10 °C to lower temperatures. During a long-term exposure to daylight (20 days) the copolymer gradually elapsed to its colourless spiropyran form, the process being ca. 100-times slower than that for monomeric MSBP. Due to the slow reverse isomerization of its merocyanine form and low solubility in water at room temperature the UV irradiated copolymer could be quantitatively separated from aqueous solution by centrifugation.     

Synthesis of poly(N-isopropylacrylamide) copolymer containing anhydride and imide comonomers - A theoretical study on reversal of LCST

The stimuli sensitive copolymer NIPAM-co-MI was prepared by copolymerizing NIPAM (N-isopropylacrylamide) with varying concentrations of maleimide (MI). The copolymer showed the same ratio of the monomeric components as that of the initial monomer feed ratio, with the two components arranged in the chain in a purely random sequence. Interestingly, the lower critical solution temperature (LCST) of NIPAM-co-MI was found to decrease with increase in MI loading in the copolymer. This behavior was in drastic contrast to the LCST behavior of a similar copolymer NIPAM-co-MA of NIPAM and maleic anhydride (MA) where the LCST showed an increase with increase in the MA concentration. A theoretical interpretation of the contrasting LCST behavior of both NIPAM-co-MI and NIPAM-co-MA was obtained by quantum mechanical (QM) modeling on small structural units of the polymers as well as molecular dynamic (MD) simulations at LCST and above the LCST on 50-unit oligomer model of the polymers. The QM models showed that the MI based polymer is more inclined towards bend structure, higher hydration, and higher intramolecular hydrogen bond formation between its monomer units when compared to those of the MA based polymer. The results of the large scale MD simulation was in complete support of the QM results as it showed the formation of a more folded and highly hydrated NIPAM-co-MI than NIPAM-co-MA.     

Temperature dependence of density of polymer gels: Effects of ionizable groups in copoly(N-isopropylacrylamide/acrylic acid or sodium acrylate)-water systems

Effects of ionizable groups in hydrogels of copolymer networks on the volumetric contraction-expansion process were investigated. Polymer networks used were: copoly[N-isopropylacrylamide (NIPA)(1 − x)/acrylic acid (HAc) or sodium acrylate (NaAc)(x)] with mole fraction of minor component (x) assuming 0.0114 and 0.0457. From the temperature (T) dependence of total volume of gels, densities of the polymer and solvent (water) components, and stoichiometry, we evaluated (1) the volume of gels occupied by a single mean polymeric residue and associated water molecules (expressed in units of nm³), mean v_sp(gel), and (2) number of water molecules per single mean polymeric residue, mean N_s(gel), from near 273 K to 323 K. These quantities (1) and (2) listed above showed how acid and salt forms affect differently on volumetric changes of gels over 50 K. We developed an approach to evaluate volumetric changes of gels solely caused by a single polymeric residue of a minor component (x < 0.05) plus associated water by applying thermodynamic first-order perturbation theory. They are specific v_sp(gel)(T) for a single HAc or NaAc polymeric residue plus associated water and the corresponding specific N_s(gel)(T). Specific v_sp(gel)(HAc or NaAc)(T) and the corresponding specific N_s(gel(T)) revealed specific characteristics in thermal behavior near their respective transition temperatures from the swollen to shrunken states. We found these thermal changes shown at the nano-scale match very well with specific changes in the molality(T) of both ionizable groups. In fact, these are directly triggered by varying contents of water in gels. Based on the understanding of dissociative equilibrium attained by ionizable groups, we successfully replaced Na⁺ in hydrogels of copoly[NIPA(1 − x)/NaAc(x)] (x = 0.0457) by hydrogen ions. Absence of Na⁺ in treated hydrogels was experimentally verified by ²³Na NMR and Na atomic absorption flame photometry. Discontinuity in the volumetric contraction-expansion process from the swollen to shrunken states and vice versa was not observed in contradiction to the previous reports [Hirotsu S, Hirokawa Y, Tanaka T. J Chem Phys 1987;87:1392-5. Matsuo SE, Tanaka T. J Chem Phys 1988;89:1695-703.] obtained by the conventional swelling experiments.     

Dependence of shrinking kinetics of poly(N-isopropylacrylamide) gels on preparation temperature

Preparation temperature dependence of equilibrium swelling degree and shrinking kinetics of poly(N-isopropylacrylamide) gel has been investigated by optical microscopic measurements. The degree of swelling, d/d₀, at 20 °C was found to be strongly dependent on the preparation temperature, T_prep, where d and d₀ are the diameter of gel during observation and preparation, respectively. The value of d/d₀ was about 1.2 for T_prep=20 °C, but steeply increased by approaching the phase separation temperature ≈32.0 °C. Above 32.0 °C, d/d₀ decreases stepwise to 1.46. This upturn in d/d₀ was correlated with spatial inhomogeneities in gels. That is, the gel became opaque by increasing T_prep. Though the shrinking half-time, t_1/2, of gel was on the order of 500 min for T_prep≤20 °C, t_1/2 decreased to 2 min for T_prep≥26 °C. Hence, a rapid shrinking was attained by simply increasing T_prep. The physical implication of this rapid shrinking in gels was discussed in conjunction with the gel inhomogeneities and a thermodynamic theory of swelling equilibrium.     

Simple method for preparation of ultra-thin poly(N-isopropylacrylamide) hydrogel layers and characterization of their thermo-responsive properties

A reactive polymer of N-isopropylacrylamide (co-PNIPAAm) was prepared by copolymerization with a vinyl monomer carrying a protected isocyanate group. Thin layers of co-PNIPAAm were formed on a surface carrying hydroxyl groups using a spin-coater and were cross-linked and immobilized on the surface by heating. These layers were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, atomic force microscopy and surface plasmon resonance (SPR). The thickness of the co-PNIPAAm layers could be controlled from 4 to 35 nm by changing the concentration of the polymer solutions and the spin-coating conditions. Very little amount of γ-globulin was adsorbed onto the co-PNIPAAm layers even when thicknesses as low as 4 nm were analyzed. In addition, the swelling ratios of the co-PNIPAAm layers were about 4.6 and 1.3 at 25 °C and at 40 °C, respectively. These results indicate that the co-PNIPAAm can be very useful in preparing thermo-sensitive layers on substrates and thus various biomedical applications may be useful.     

Synthesis and thermo-responsive behavior of fluorescent labeled microgel particles based on poly(N-isopropylacrylamide) and its related polymers

Poly(N-isopropylacrylamide) (PNIPAM) microgel particles labeled with 3-(2-propenyl)-9-(4-N,N-dimethylaminophenyl)phenanthrene (VDP) as an intramolecular fluorescent probe were prepared by emulsion polymerization. The thermo-responsive behavior of the VDP-labeled PNIPAM microgel particles dispersed in water was studied by turbidimetric and fluorescence analyses. The transition temperature of the VDP-labeled PNIPAM microgel particles in water determined by turbidimetric analysis was ca. 32.5 °C. The wavelength at the maximum fluorescence intensity of the VDP units linked directly to the microgel particles dramatically blue-shifted around the transition temperature. In addition it gradually blue-shifted even below the transition temperature where there was no change observed in the turbidity. These findings suggest that the gradual shrinking of microgel particles occurs with increasing temperature and the subsequent dramatic shrinking results in the increasing in the turbidity. The transition temperatures of VDP-labeled poly(N-n-propylacrylamide) and poly(N-isopropylmethacrylamide) microgel particles determined by turbidimetric analysis were ca. 23 and ca. 42.5 °C, respectively, and their thermo-responsive behavior was similar to that for the VDP-labeled PNIPAM system. In these three systems the microenvironments around the fluorescent probes above the transition temperatures became more hydrophobic than those below the transition temperature, and the estimated values of microenvionmental polarity around the VDP units on their collapsed states were almost the same.     

Effect of a combination of hexamethylphosphoramide and alkyl alcohol on the stereospecificity of radical polymerization of N-isopropylacrylamide

Radical polymerization of N-isopropylacrylamide (NIPAAm) was investigated at low temperatures in the presence of both hexamethylphosphoramide (HMPA) and alkyl alcohols. Although HMPA and alkyl alcohols separately induced syndiotactic specificity in NIPAAm polymerization in toluene at low temperatures, a combination of HMPA and less bulky alkyl alcohols, such as methanol and ethanol, was found to induce isotactic specificity at −80 °C. NMR analysis of mixtures of NIPAAm, ethanol and HMPA suggested the formation of a 1:1:1 complex through O-H•••O=C and N-H•••O=P hydrogen bonding. It is believed that the steric effect of HMPA enhanced by cooperative hydrogen bonding was responsible for the combined effect of HMPA and alkyl alcohols in inducing isotactic specificity.     

Synthesis and characterization of temperature-responsive copolymer of PELGA modified poly(N-isopropylacrylamide)

Novel amphiphilic PELGA modified temperature-responsive copolymer, [(poly(methoxyethylene glycol)-co-poly(lactic acid)-co-poly-(glycolic acid))acrylate-co-poly(N-isopropylacrylamide)-co-poly(N-hydroxymethylacrylamide)] (PELGAA-co-PNIPAAm-co-PNHMAAm) was synthesized by incorporating PELGA as the amphiphilic moiety into poly(N-isopropylamide) with various LA/GA ratios. Polymers obtained were characterized by FT-IR, GPC, ¹H-NMR and DSC. The lower critical solution temperature (LCST) of the copolymeric nanoparticles was 40±0.6 °C, the critical aggregation concentration (CAC) was 18 mg L⁻¹, and reversible change in nanoparticle size related to temperature was fluctuated between 210±10 and 109±26 nm, while change in zeta potential of the nanoparticles was between −36±6 and −26±4 mV. The transmission electron microscopy (TEM) images of nanoparticles were also presented.