广义改进型Hammerstein预失真器的实现方法及验证

射频功率放大器与生俱来的非线性是无线通信前端设计需要解决的核心问题之一。根据广义改进型Hammerstein功率放大器非线性模型,提出一种应用于射频功放线性化的新型数字预失真器——广义改进型Hammerstein(Generalized Augmented Hammerstein, GAH)预失真器,并给出了该预失真器的实现方法。另外,为了精确分析GAH 预失真器的性能,采用实际功放的输入输出数据进行仿真和实验。被测功放为中心频率1960 MHz,带宽40 MHz, 输出功率45 dBm的Doherty功放。仿真和实验证明：提出的数字预失真器不仅计算复杂度远低于记忆多项式（Memory Polynomial,MP）和分数阶记忆多项式（Fractional Memory Polynomial, FMP）预失真器,而且其线性化能力也强于AH、MP及FMP等预失真器。     

一种用于TETRA系统的数字子带滤波预失真器

本文提出一种适用于TETRA数字集群系统的基于子带滤波技术的数字自适应预失真器。数字子带滤波预失真器将发射信号分为若干子带进行功放线性化处理,降低了预失真过程中运算速率的要求,增加自适应收敛速度。子带滤波技术同时解决了功放宽带化所带来的记忆性问题,扩展了数字预失真器的工作带宽。TETRA多载波发射信号的仿真结果说明,数字子带滤波预失真器对无记忆功放和有记忆功放均具有良好的线性化效果,明显扩大了功放的线性工作范围。      

基于数/模混合预失真技术的功放线性化北大核心CSCD

随着移动通信信号带宽的增加,传统功率放大器数字预失真线性化技术越来越受到采样率的限制。为了使线性化效果更好,文中提出了一种数字预失真和模拟预失真相结合的混合预失真器,利用模拟预失真宽带宽的特点和数字预失真线性化能力强的优势,把模拟预失真和数字预失真融合在一起,共同补偿功放的非线性。由于受实验设备采样率的限制,文中采用了带宽为60 MHz的5 G NR信号对一个中心频率为3.5 GHz的射频功放进行实验验证。实验结果表明:提出的混合预失真器不仅优于单独的数字预失真器和模拟预失真器的非线性矫正性能,而且还能改善数字预失真因采样率限制无法改善的带外互调失真。     

广义记忆型神经网络射频功放数字预失真器

提出了一种基于广义记忆型神经网络(GMNN)的数字预失真器非线性模型,以更好地抑制由于射频功放动态非线性导致的带内失真以及带外频谱扩展等问题。通过引入时间上的超前项,使得功放模型的记忆效应建模能力得以扩展,通过添加高阶非线性级数,使得功放非线性建模精度进一步提高。文中使用带宽为20 MHz 的4载波WCDMA 信号作为测试信号,对一个中心频率为460 MHz 的60W Doherty 射频功放进行数字预失真线性化实验。实验结果表明,广义记忆型神经网络数字预失真器的带外抑制可达19 dB,能更有效地抑制射频功放的带外频谱扩展,相比于其他几种预失真器展现出更好的线性化效果,验证了广义记忆型神经网络数字预失真器的有效性。     

数字电视发射机功放的预失真技术研究

介绍了一种可识别HPA记忆效应的数字预失真器的结构、特点,以Hammerstein预失真器为例仿真了可识别功放记忆效应的基带数字预失真器,并在数字电视发射机功放线性化中加以应用,结果表明记忆效应预失真结构应用在数字电视发射机功放的线性化中可以取得令人满意的效果.     

基于增强型LSTM神经网络的5G射频功放线性化

本文提出了一种基于增强型LSTM神经网络(A-LSTM)的数字预失真线性化模型,以更好的补偿5G宽带射频功放的动态非线性特性。模型的输入层在引入延迟抽头模拟功放线性记忆效应的基础上,对每一个延迟抽头进行非线性级数展开用于补偿功放的非线性记忆效应,从而更好地抑制功放的动态非线性失真导致的带内失真以及带外频谱扩展等问题。为验证模型的有效性,本文采用100MHz的5GNR信号作为测试信号,对一个中心频率为2.6GHz的5G射频功放进行数字预失真线性化实验。实验结果表明,基于增强型LSTM神经网络数字预失真器的带外抑制可达16dB,相比于其他几种预失真器展现出更好的线性化效果,验证了基于增强型LSTM神经网络数字预失真器的有效性。     

功放数字预失真技术现状及未来发展

功放是无线通信发射机的重要组成部分,随着无线通信的不断发展,对宽带线性功放的要求也越来越高。然而,功放的非线性特性和记忆效应会导致信号严重失真。为了减小带内失真和邻道干扰,数字预失真成为功放线性化技术中最有发展潜力的技术。介绍了功放模型,数字预失真的学习结构、数字预失真器参数的辨识算法等研究现状,探讨了数字预失真的发展趋势,为今后数字预失真技术的研究提供参考。     

移动通信系统中宽带功放线性化设计与仿真

自适应数字预失真技术能够解决宽带高峰均比信号经过功放产生的非线性失真问题.主要介绍了自适应数字预失真的结构、预失真器的数学模型及相关的自适应算法.仿真结果表明采用自适应数字预失真技术能够显著地改善功放输出信号的带外频谱失真,是一种有效、灵活的技术.     

5G宽带功放线性化平台开发与验证

本文完成了基于5G宽带功放线性化平台的在线数字预失真模型测试和实时预失真器验证的功能开发,两种模式可以随时进行切换.该方案抛弃了传统的PC加仪器的测试方式,可在线高效的迭代测试.实时预失真器验证功能是在FPGA中加入一种实时数字预失真硬件结构.我们使用记忆多项式(MP)、分解向量旋转(DVR)和广义记忆多项式(GMP)...     

基于多项式与查找表的预失真技术研究

为补偿功率放大器固有的非线性,提出了一种新型的预失真器。该预失真器结合查找表和多项式两种常用的预失真方法实现,在查找表中存储分段低阶多项式系数,根据输入信号的幅度查表得到相应的多项式系数对输入信号进行预失真处理。仿真结果表明,该预失真器对互调失真（IMD）的改善优于多项式预失真器,能有效改善信号因功放非线性失真而导致的信号星座图扭曲及频谱再生,提高通信系统的性能。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks