Band notched UWB circular monopole antenna with inductance enhanced modified mushroom EBG structures

Circular monopole antenna for ultra-wide band applications with notch band transition from WLAN to WiMAX is presented. The proposed antenna rejects WiMAX band (3.3–3.8 GHz). Antennas utilises modified mushroom-type electromagnetic band gap (EBG) structures to achieve band-notched designs. The proposed inductance enhanced modified EBG structures are 34 % compact than the conventional mushroom EBG structures. The band notched antenna designs using EBG structures have advantages like notch-frequency tuning, antenna design independent approach and omnidirectional radiation pattern. The step wise effect of inductance enhancement and tuning of notch from WLAN band (5–6 GHz) to WiMAX band is shown. Effect of variation of EBG structure parameters on which notched frequency depends is investigated. The proposed antenna has been fabricated on low cost FR4 substrate with overall dimensions as (42 × 50 × 1.6) mm³. Measured results are in good agreement with simulated ones.     

Design and Development of an Efficient EBG Structures Based Band Notched UWB Circular Monopole Antenna

Band notched circular monopole antennas for ultra-wide band applications are proposed in this paper. The proposed antennas in this paper can reject worldwide interoperability for microwave access WiMAX band (3.3–3.8 GHz) and wireless local area network WLAN band (5–6 GHz). Antennas utilises mushroom-type electromagnetic band gap (EBG) structures and I-slot embedded edge located via (ELV) EBG structures to achieve band-notched designs. The advantages of band notched designs using EBG structures like notch-frequency tuning, dual-notch antenna designs and stable radiation pattern are also verified. Various antenna designs with slot in EBG structures, variations in placement of EBG structures, number of EBG structures and ELV type EBG structures are simulated. About 30% reduction in size of EBG structures is obtained if conventional mushroom type EBG is replaced by proposed I-slot embedded ELV-EBG structure. Fabricated and measured results are in good agreement with simulated ones.

     

Triple band notched mushroom and uniplanar EBG structures based UWB MIMO/Diversity antenna with enhanced wide band isolation

Triple band-rejection MIMO/Diversity UWB antenna characteristics are described in this paper. Proposed antenna discards worldwide interoperability for microwave access WiMAX band from 3.3 to 3.6 GHz, wireless local area network WLAN band from 5 to 6 GHz and X-Band satellite downlink communication band from 7.1 to 7.9 GHz. Mushroom Electromagnetic Band Gap (EBG) structures helps to attain band notches in WiMAX and WLAN bands. Uniplanar plus shaped EBG structure is used for notch in X-band downlink satellite communication band. Decoupling strips and slotted ground plane are employed to develop the isolation among two closely spaced UWB monopoles. The individual monopoles are 90° angularly separated with stepped structure which helps to reduce mutual coupling and also contributes towards impedance matching by increasing current path length. Mutual coupling magnitude of more than 15 dB is found over whole UWB frequency range. The Envelope Correlation Coefficient is less than 0.02 over whole UWB frequency range.The variations in the notched frequency with the variations in mushroom EBG structure parameters are investigated.The antenna has been designed using FR-4 substrate and overall dimensions is (64 × 45 × 1.6) mm³.     

A novel microstrip antenna loaded with EBG and ELC for bandwidth enhancement

This paper proposes the design of three compact antennas for WiMAX, WLAN and ISM band applications. Antenna 1 consists of a monopole radiating element with an electromagnetic band gap (EBG) structured ground. By employing the EBG structure, an ultra-wide band frequency of 2.4–4.8 GHz (66.66%) is achieved. Antenna 2 is configured with an electric-LC (ELC) element, which achieved an ultra-wide band (UWB) frequency of 2.38–4.91 GHz (69.41%). Antenna 3 is integrated with ELC and EBG together, in which a UWB frequency of 2.3–5.3 GHz (78.94%) is obtained with improved impedance matching. The three antennas have omnidirectional radiation patterns which cover the ISM band at 2.4 GHz and WiMAX at 2.5/3.5 GHz over the operating bands. The radiation efficiency is?>?75% throughout the operating bands of all the antennas. In addition to the WiMAX and ISM bands, antenna 3 covers WLAN in the 5.2 GHz band. The proposed design can be applied to wireless mobile communication systems, which have the advantage of ease of fabrication and compactness.

     

Electromagnetic band gap coupled tri-notched miniaturized ultra-wideband antenna loaded with slot and parasitic strip

An electromagnetic band gap (EBG) coupled miniaturized tri-notched printed ultra-wideband (UWB) monopole microstrip antenna having dimensions of 22 mm × 26 mm × 1.6 mm loaded with a slot in radiating patch and a parasitic strip in the ground plane has been presented. The proposed structure incorporates a square-shaped metallic radiating patch with a square EBG structure adjacent to the microstrip feed line, a U-shaped meandered slot over the radiating element, and a U-shaped parasitic resonator at the ground plane beneath the radiating element, to reject the C-band satellite downlink (3.7 to 4.2 GHz), WLAN frequency band (5.15 to 5.85 GHz), and X-band satellite downlink (7.25 to 7.75 GHz) frequency bands, respectively. The designed antenna operates in the frequency range from 3 to 11.1 GHz, with an impedance bandwidth of 8.1 GHz and a percentage bandwidth of 114%. Modification steps incorporating into the reference antenna to achieve the desired design objectives have been discussed, along with parametric studies. The proposed design has been simulated using Ansys HFSS, and measurement has been taken using standard measurement technique and compared with the simulated results.     

Compact Quad Band-Notched Monopole Antenna for UWB Systems

A novel compact microstrip-fed UWB antenna with quad notched band is proposed. The antenna consists of a rectangular radiating patch with a half circle, a tapered microstrip feed-line, and a semi-elliptical ground plane. With a pair of L-shaped slots, complementary co-directional SRR and a pair of C-shaped stubs, four notched bands are created to prevent interference from WiMAX/lower WLAN/higher WLAN/X-band. Experimental results show that the designed antenna, with compact size of 20 × 30 mm², has an ultrawide band (VSWR < 2) from 2.68 to 13 GHz, except four notched bands of 3.13–3.8, 4.87–5.52, 5.65–6.1, 7.12–8 GHz. Good radiation patterns and stable gain within the operating band have been observed.     

Compact,Isolation Enhanced,Band-Notched SWB–MIMO Antenna Suited for Wireless Personal Communications

Herein, a Conductor Backed Co-Planar Waveguide fed, compact, slotted Multiple–Input–Multiple–Output or MIMO antenna having Super Wideband (SWB) response and tunable band-notching feature is presented. In addition, an improved method for cut-off frequency prediction of the antenna is formulated. A super wide frequency response from 01.21 to 34.0 GHz and notches at Wireless Local Area Networks or WLAN bands (04.92–05.83 GHz) and Worldwide Inter-operability for Microwave Access or WiMAX bands (03.30 GHz–03.70 GHz) are obtained. By fine tuning the dimensions of the Split Ring Resonator Structure introduced in the radiating element, band-notched characteristics centered at 05.50 GHz WLAN band is obtained. A second band notch having centre frequency at 03.50 GHz for the WiMAX band is obtained by the introduction of a Spiral Microstrip Defected Structure in the feeding segment. The antenna is 20?×?36?×?1 mm³ in dimension. Acceptable gain all through the functional bandwidth, excepting the notched bands makes the MIMO antenna a novel contender for SWB operations particularly for Wireless Personal Communications.

     

Compact Planar Monopole Antenna with Dual Band Notched Characteristics Using T-Shaped Stub and Rectangular Mushroom Type Electromagnetic Band Gap Structure for UWB and Bluetooth Applications

In this paper, an ultra-wideband (UWB) antenna with dual band-notched characteristics is proposed. The proposed antenna also covers ISM (Industrial, Scientific, and Medical)/Bluetooth band. The antenna consists of a microstrip fed truncated U-shaped patch, T-shaped stub, rectangular mushroom type electromagnetic band gap structures (EBG), and partial ground plane. To mitigate the problem of interference due to standard narrow bands (like wireless interoperability microwave access (WiMAX) and wireless local area network (WLAN)) lie in the range of UWB, dual band notched characteristics is introduced. The WiMAX and WLAN band notched characteristics are realized by introducing a T-shaped stub and rectangular mushroom type EBG structures, respectively. The proposed antenna is printed on a 1.6 mm thick FR4 substrate with relative permittivity \((\upvarepsilon _{\mathrm{r}})\) 4.4 and the size of actual antenna is \(36 \times 40\hbox { mm}^{2}\) . The measured results shows that the proposed antenna attains a wide impedance bandwidth \((\hbox {VSWR} \le 2)\) from 2.35 to 11.6 GHz with dual band notched characteristics from 3.29 to 3.9 GHz and 5.1 to 5.85 GHz with stable radiation patterns. The time domain behaviors of the proposed antenna is also analyzed for pulse handling capability.     

Compact UWB monopole antenna with quadruple band notched characteristics

ABSTRACT

A compact planar Ultrawideband (UWB) monopole antenna with quadruple band notch characteristics is proposed. The proposed antenna consists of a notched rectangular radiating patch with a 50 Ω microstrip feed line, and a defected ground plane. The quadruple band notched functions are achieved by utilising two inverted U-shaped slots, a symmetrical split ring resonator pair (SSRRP) and a via hole. The fabricated antenna has a compact size of 24 mm × 30 mm × 1.6 mm with an impedance bandwidth ranging from 2.86 to 12.2 GHz for magnitude of S₁₁ < ?10 dB. The four band notched characteristics of proposed antenna are in the WiMAX (worldwide interoperability for microwave access) band (3.25–3.55 GHz), C band (3.7–4.2 GHz), WLAN (wireless local area network) band (5.2–5.9 GHz) and the downlink frequency band of X band (7–7.8 GHz) for satellite communication are obtained. The measured and simulation results of proposed antenna are in good agreement to achieve impedance matching, stable radiation patterns, constant gain and group delay over the operating bandwidth.     

Design of UWB monopole antenna with dual notched band characteristics by using π-shaped slot and EBG resonator

In this paper, we propose the design of coplanar waveguide (CPW) ultra-wideband (UWB) dual notched band monopole antenna with a π-shaped slot and EBG is proposed. The designed antenna produces an impedance bandwidth of 2.7–11.7 GHz (VSWR < 2), except with 3.4 GHz (3.3–3.7 GHz) for S-band WiMAX application and 6.9 GHz (6.5–7.2 GHz) for C-band IEEE INSAT applications. Here, the lower and upper notches are realized by proposing a π-shaped slot on the radiating element and an electromagnetic bandgap structure as a resonator integrated on either side of the ground plane. Meanwhile, the impedance over a frequency range and current distribution are also plotted for the proposed design. The antenna prototype is fabricated and characterized experimentally for validation purpose. Fair matching is observed among the simulated and measured results.     

EBG combined isolation slots with a bridge on the ground for noise suppression

In this paper, a coplanar electromagnetic bandgap (EBG) structure is presented to realise with L-bridge unit cell on the power plane that is combined isolation slots with straight/meander-bridge on the ground plane. The proposed structure with meander-bridge on the ground plane possesses an ultra-wide band gap from 0.22 GHz to 20 GHz with isolation below ?30 dB, which is remarkable better than traditional EBG. The lumped equivalent-circuit model for the structure is presented and analysed to explain the mechanism of the improvement of noise suppression. The cut-off frequency for the proposed structure is obtained by theoretical analysis. It is shown that the increase of equivalent inductance of the bridge influences the cut-off frequency. The meander-bridge on the ground plane is adopted to broaden the stopband and significantly enhance the suppression depth. The validity of the presented structure is verified by the simulation compared to the measurement.     

A slot resonators based quintuple band-notched Y-shaped planar monopole ultra-wideband antenna

A Y-shaped ultra-wideband (UWB) monopole antenna containing modified ground plane with five stop bands is presented. An inverted U-shaped slot and a C-shaped slot are placed on Y-shaped radiating patch to achieve two notched bands while three pairs of C-shaped slots are placed at different positions on modified ground plane to achieve three more notched bands. The proposed antenna is designed, fabricated and experimentally tested. The designed Y-shaped antenna has overall dimensions of 36 × 38 × 1.6 mm³ (0.34λ_l × 0.36 λ_l × 0.016 λ_l) and has impedance bandwidth 2.86–13.3 GHz at |S₁₁| < −10 dB level. Measured band notches are achieved at 3.75/5.43/7.87/8.62/9.87 GHz centre notched frequencies to eliminate worldwide interoperability for microwave access (WiMAX) band (3.45–4.0 GHz), wireless local area network (WLAN) band (5.15–5.90 GHz), X-band for satellite communication (6.77–8.00 GHz), ITU-8 band (8.3–9.1 GHz), and radio navigation (RN) band (9.3–10.6 GHz), respectively. Variation of slot parameter on individual band notch is also investigated. Omnidirectional radiation pattern for XZ-plane and dipole-like radiation pattern for YZ-plane are observed. Stable gain, variation of phase response in linear fashion and group delay <1.3 ns for whole ultra-wideband except at band notches is achieved.     

A Quad Band Metamaterial Miniaturized Antenna for Wireless Applications with Gain Enhancement

This paper presents a designing of dual-coated miniaturized metamaterial inspired quad band antenna for wireless standards with gain enhancement. Proposed design has compactness in size with electrical dimension of 0.239?×?0.351?×?0.0127 λ (30?×?44?×?1.6 mm³), at lower frequency of 2.39 GHz. The antenna consist a double printed slotted hexagonal shape radiating section with implementation of metamaterial rectangular split ring resonator. Antenna achieve quad bands for wireless standards WLAN (2.4/5.8 GHz), WiMAX (3.5 GHz), IEEE 802.11P (WAVE-5.9 GHz), ITU assigned X bands (7.25–7.75, 7.9–8.4 GHz) and satellite communication systems operating bands (C-band: 7.4–8.9 GHz and X-band: 8–10 GHz for satellite TV). An acceptable gain, stable radiation characteristics and good impedance matching are observed at all the resonant frequencies of the proposed structure. By application of proposed frequency selective surface an average enhancement of gain is about 4–5 dB over the operating band. Antenna fabricated and tested represent good agreement between the simulated and measured results.

     

一种基于倒“T”形贴片结构的WLAN天线设计

提出了一种基体背面有电磁带隙结构的倒“T”形双频微带天线。研究发现该天线具有双频带特性,其双频工作频率分别为2.4 GHz和5.2 GHz,相应的带宽为805 MHz (2.099~2.944 GHz) 和831 MHz (4.568~5.409 GHz),增益达到3.1 dBi。仿真和测试结果基本吻合,表明该天线可以很好地满足WLAN工作频段标准要求,具有很好的应用前景。     

A dual-band semi-circular patch antenna for WiMAX and WiFi-5/6 applications

A semi-circular patch antenna (SCPA) is designed for WiMAX and WiFi-5/6 communications. The footprint of the proposed SCPA is only 30 × 40 × 1.575 mm³, which is composed of a semi-circular patch and a partial ground plane. The main strength of this work is that the estimated wide dual-frequency span of 2.39–3.75 GHz and 5.39–7.18 GHz are contributed with two sharp resonances at 2.77 and 6.46 GHz, respectively. The proposed SCPA has been practically tested after fabrication. The measured results confirm that the designed antenna achieved the bandwidth necessity for WiMAX 1.5 (2.5–2.69 GHz), WiMAX 2 (3.4–3.6 GHz), WiFi-5 (5.15–5.85 GHz) and WiFi-6 (5.925–7.125 GHz). In the two resonance frequencies of 2.77 and 6.46 GHz, the designed antenna achieved a gain of 2.558 and 4.109 dB, respectively. In addition, the SCPA also manifests good radiation properties and achieves an average efficiency of more than 90%. A professional version of the 3D electromagnetic simulator is utilized to examine the effect of diffident parameters and model the tested antenna.     

Design of Compact Quad-Band Notched UWB-MIMO Antenna

With quad-notched band characteristic, a compact ultra-wideband (UWB) multiple-input-multiple-output antenna is proposed in the article. There are two identical monopole elements in the system. By inserting symmetrical L-shaped slots, complementary split-ring resonators) and C-shaped stubs in each element, four notched bands are achieved to filter 3.5 GHz WiMAX, 5.25 GHz lower WLAN, 5.8 GHz upper WLAN, and 7.5 GHz X-band. Without decoupling structures, the antennas were placed vertically to obtain high isolation. Results indicate that the antenna operates from 2.6 to 13 GHz except four rejected bands, and port isolation (S21) is better than ?25 dB, envelope correlation coefficient is below 0.002 in UWB spectrum frequency of 3.1–10.6 GHz.     

A low-profile internet of things-controlled frequency reconfigurable triple band antenna for microwave sensing applications

This paper presents the design and analysis of IoT (Internet of Things) controlled frequency reconfigurable triple-band antenna for WiMAX, ISM (Industrial, Scientific, and Medical) band, and X band microwave sensing applications. The designed antenna is constructed on polyimide substrate with a limited ground plane with compact dimensions of 27.5?×?8?×?0.6 mm³. The fabricated antenna is sensing the microwave signals that fall under WiMAX, ISM, & WLAN, and X band with a tunable frequency range of 3.2–3.9, 5.1–6.5, and 8.2–12 GHz, respectively. The operating frequency bands can be tuned by PIN diodes and which will be controlled by using the IoT-based NodeMCU module. The designed antenna resonates at 3.5, 5.9, and 8.45 GHz when the PIN diodes are in ON state and resonating at 3.79, 5.8, and 10.48 GHz when PIN diodes are in OFF state. The proposed antenna has bidirectional radiation at upper-frequency bands and unidirectional at lower frequency bands with gain ranging from 2.2 to 3.25 dB. The proposed frequency reconfigurable triple-band antenna has a more than 90% radiation efficiency at all the operating frequencies in the ON state. A good similarity between the measured (Antenna measurement setup with Vector Network Analyzer) and simulated results (CST Microwave Studio) is observed. In the real-time environment, the proposed reconfigurable antenna is tested by the CDAC (Centre for Development of Advanced Computing, India) Cmote unit found its suitability to microwave sensing applications.

     

Design of Compact Planar Triple Band-Notch Monopole Antenna for Ultra-wideband Applications

In this article a microstrip-fed mickey shaped monopole antenna with triple notched band characteristics for ultra-wideband applications is presented. By etching two slots in the ground plane, improved VSWR bandwidth is achieved. Mickey shape radiating patch provides 10 dB return-loss bandwidth from 3.10 to 10.60 GHz. By etching three simple C-shaped slots on the radiating patch, three existing wireless communication systems which interfere with UWB band is removed which includes WiMAX IEEE802.16 (3.30–3.80 GHz), WLAN IEEE802.11a/h/j/n (5.15–5.35, 5.25–5.35, 5.47–5.725, 5.725–5.825 GHz) and X-band downlink satellite system (7.1–7.9 GHz). Experimental results reveal that the proposed antenna exhibits desirable radiation patterns in the far field, resulting omnidirectional like pattern in the H-plane and nearly dipole like pattern in the E-plane.     

Triple Band Annular Ring Loaded Stacked Circular Patch Microstrip Antenna

In this paper a novel structure of annular ring loaded stacked circular patch microstrip antenna is theoretically analysed to observe various parameters such as return loss, input impedance, gain, directivity and radiation pattern. It is found that antenna possess three band of operation which signify the compactness and multiband operation of antenna. The antenna is resonating at three operating frequencies 1.720, 2.950, 3.060 GHz. The proposed theory is verified by simulation using Ansoft’s HFSS and theoretical results are in good agreement with simulated results. The antenna is useful for multi-services operations such as WLAN, GSM, UMTS, and WiMAX services.     

Novel miniaturized folded UWB microstrip antenna‐based metamaterial for RF energy harvesting

This paper presents a design of an ultra‐wideband (UWB) cylindrical metamaterial (MTM) antenna for radio frequency (RF) energy harvesting to suit the fields of Internet of Things (IoT) applications. The patch circuitry is based on 3×5 Hilbert‐shaped MTM unit cells array to enhance the antenna bandwidth. While, the antenna ground plane is defected with an electromagnetic band gap structure to enhance the gain. The antenna is mounted on a polytetrafluoroethylene cylindrical substrate of an outer diameter of 15 mm and length of 32 mm with 1 mm in thickness. The substrate relative permittivity is 2.04, and the loss tangent is 0.0002. The antenna patch and the ground plane structures are printed with silver nanoparticles ink using a ^2.5D CNC plotter machine. The fabricated prototype provides an UWB over the frequency range from 3.77 up to 13.89 GHz with a first separate resonant mode at 3 GHz. The antenna performance is tested numerically using two different software packages of CST MWS and HFSS. Then, an experimental validation is conducted to realize the performance of the proposed antenna in harvesting the RF energy. Excellent conversion efficiency, about 90%, is achieved at 5.8 GHz. Finally, the antenna radiation patterns and S₁₁ spectrum are measured and compared against their simulated results to achieve good agreements.