Shear force imaging of DNA in a near-field scanning optical microscope (NSOM)

A near-field scanning optical module has been constructed as an accessory for a Nanoscope IIIa commercial scanning probe microscope. Distance feedback and topographic registration are accomplished with an uncoated optical fibre scanning tip by implementation of the shear force technique. The tip is driven by a piezoelectric actuator at a resonance frequency of 8–80 kHz. A laser diode beam is scattered by the tip and detected by a split photodiode, with lock-in detection of the difference signal. The amplitude ( r ) and phase (τ) responses were characterized as a function of the calibrated tip–sample separation. Using an r cos τ feedback signal, imaging of pUC18 relaxed circular plasmid DNA spread on mica precoated with cetylpyridinium chloride was achieved. The apparent width (28 ± 5 nm) was approximately four times that achieved by scanning force measurements with the same instrument; the apparent height of the DNA (0.6 ± 0.3 nm) was similar with the two techniques. These results demonstrate the applicability of the shear force signal for imaging biological macromolecules according to topography and in conjunction with the optical signals of a near-field scanning optical microscope (NSOM).     

A compact sensor head for simultaneous scanning force and near-field optical microscopy

A compact sensor head based on scanning force microscopy (SFM) using cantilever probes has been developed. The idea is to replace the microscope objective of a conventional optical microscope by this compact module and turn the optical microscope into a scanning force and near-field optical microscope with subwavelength resolution. We describe our concept and present initial results showing images of the object’s optical properties and surface topography recorded simultaneously.     

近场光学显微镜及其在生物膜方面的应用

本文首先介绍近场光学显微镜的基本原理,然后介绍近场光学显微镜与传统光学显微镜、原子力显微镜、扫描隧道显微镜相比,在生物膜研究方面的优势。并在此基础上着重介绍近场光学显微镜在生物膜方面的应用。     

Spectroscopic scanning near-field optical microscopy with a free electron laser: CH2 bond imaging in diamond films

Hydrogen chemistry in thin films and biological systems is one of the most difficult experimental problems in today's science and technology. We successfully tested a novel solution, based on the spectroscopic version of scanning near-field optical microscopy (SNOM). The tunable infrared radiation of the Vanderbilt free electron laser enabled us to reveal clearly hydrogen-decorated grain boundaries on nominally hydrogen-free diamond films. The images were obtained by SNOM detection of reflected 3.5 µm photons, corresponding to the C–H stretch absorption, and reached a lateral resolution of 0.2 µm, well below the λ/2 (λ= wavelength) limit of classical microscopy.     

太赫兹近场光学亚表面检测技术研究

研究了太赫兹散射式扫描近场光学显微镜（Terahertz scattering-type scanning near-field optical microscopy,THz s-SNOM）对亚表面金属微纳结构的显微成像检测。首次采用自主搭建的THz s-SNOM系统对表面覆盖了六方氮化硼薄膜的金微米线进行太赫兹近场显微测量,获得了具有纳米量级空间分辨率和较高对比度的近场显微图。结合全波数值模拟,分析了THz s-SNOM探测亚表面金属微纳结构的空间分辨率、近场散射信号强度和成像对比度。研究表明,THz s-SNOM具有优良的亚表面显微成像检测能力,可应用于微纳电子器件的亚表面结构表征和缺陷检测。     

Penetration pathways of fluorescent dyes in human hair fibres investigated by scanning near-field optical microscopy

Thin cross-sections of human hairs were investigated by scanning near-field optical microscopy (SNOM) and confocal laser scanning microscopy (CLSM) after penetration of a fluorescent dye. The same samples were measured with both techniques to compare the observed structures. The images obtained from the two methods show nearly identical structures representing pathways of the dye molecules in hairs. The SNOM images provide a higher resolution than the CLSM images. Therefore, SNOM is believed to be a suitable method for investigations at a resolution of 100 nm on penetration pathways of fluorescent dyes such as the cell membrane complex pathway in cross-sections of hairs.     

Optical microcantilever consisting of channel waveguide for scanning near-field optical microscopy controlled by atomic force

We develop a novel optical microcantilever for scanning near-field optical microscopy controlled by atomic force mode (SNOM/AFM). The optical microcantilever has the bent channel waveguide, the corner of which acts as aperture with a large tip angle. The resonance frequency of the optical microcantilever is 9 kHz, and the spring constant is estimated to be 0.59 N/m. The optical microcantilever can be operated in contact mode of SNOM/AFM and we obtain the optical resolution of about 200 nm, which is as same size as the diameter of aperture. We confirm that the throughput of optical microcantilever with an aperture of 170 nm diameter would be improved to be more than 10⁻⁵.     

Magnetic domain imaging with a scanning near-field optical microscope using a modified Sagnac interferometer

We report on the combination of a scanning near-field optical microscope and a modified Sagnac interferometer for magnetic-domain imaging in the reflection mode. The Sagnac interferometer is used for detection of the magneto-optical Kerr effect. Since the interferometer is inherently insensitive to polarization changes caused by topography effects, magnetic-domain imaging is not limited to samples with flat surfaces. In this way, it is possible to image magnetic bits written on the tracks of a magneto-optical disc that has a rather pronounced surface profile.     

Imaging 'intact' myofibrils with a near-field scanning optical microscope

Fluorescently labelled myofibrils were imaged in physiological salt solution by near-field scanning optical microscopy and shear-force microscopy. These myofibrils were imaged in vitro , naturally adhering to glass while retaining their ability to contract. The Z-line protein structure of the myofibrils was antibody labelled and easily identified in the near-field fluorescence images. The distinctive protein banding structure of the myofibril was also seen clearly in the shear-force images without any labelling requirement. With the microscope in the transmission mode, resolution of the fluorescence images was degraded significantly by excessive specimen thickness (>1 μm), whereas the shear-force images were less affected by specimen thickness and more affected by poor adherence to the substrate. Although the exact mechanism generating contrast in the shear-force images is still unknown, shear-force imaging appears to be a promising new imaging modality.     

Single molecule mapping of the optical field distribution of probes for near-field microscopy

The most difficult task in near-field scanning optical microscopy (NSOM) is to make a high quality subwavelength aperture probe. Recently, we have developed high definition NSOM probes by focused ion beam (FIB) milling. These probes have a higher brightness, better polarization characteristics, better aperture definition and a flatter end face than conventional NSOM probes. We have determined the quality of these probes in four independent ways: by FIB imaging and by shear-force microscopy (both providing geometrical information), by far-field optical measurements (yielding throughput and polarization characteristics), and ultimately by single molecule imaging in the near-field. In this paper, we report on a new method using shear-force microscopy to study the size of the aperture and the end face of the probe (with a roughness smaller than 1.5 nm). More importantly, we demonstrate the use of single molecules to measure the full three-dimensional optical near-field distribution of the probe with molecular spatial resolution. The single molecule images exhibit various intensity patterns, varying from circular and elliptical to double arc and ring structures, which depend on the orientation of the molecules with respect to the probe. The optical resolution in the measurements is not determined by the size of the aperture, but by the high optical field gradients at the rims of the aperture. With a 70 nm aperture probe, we obtain fluorescence field patterns with 45 nm FWHM. Clearly, this unprecedented near-field optical resolution constitutes an order of magnitude improvement over far-field methods like confocal microscopy.     

Fluorescence imaging with a laser trapping scanning near-field optical microscope

We investigated fluorescence imaging using a near-field scanning optical microscope which uses a laser-stabilized gold nanoparticle as a near-field probe. This microscope is suitable for observations of biological specimens in aqueous solutions because the probe particle is held by a noncontact force exerted by a laser beam. Theoretical calculations based on Mie scattering theory are presented to evaluate the near-field enhancement by a gold particle of 40 nm diameter. We also present fluorescence images of a single fluorescent bead and discuss the near-field contribution to the fluorescence image in this type of microscope.     

High-resolution constant-height imaging with apertured silicon cantilever probes

We present high-resolution aperture probes based on non-contact silicon atomic force microscopy (AFM) cantilevers for simultaneous AFM and near-infrared scanning near-field optical microscopy (SNOM). For use in near-field optical microscopy, conventional AFM cantilevers are modified by covering their tip side with an opaque aluminium layer. To fabricate an aperture, this metal layer is opened at the end of the polyhedral probe using focused ion beams (FIB). Here we show that apertures of less than 50 nm can be obtained using this technique, which actually yield a resolution of about 50 nm, corresponding to λ/20 at the wavelength used. To exclude artefacts induced by distance control, we work in constant-height mode. Our attention is particularly focused on the distance dependence of resolution and to the influence of slight cantilever bending on the optical images when scanning at such low scan heights, where first small attractive forces exerted on the cantilever become detectable.     

Scanning near-field optical microscopy of a cell membrane in liquid

The applications of scanning near‐field optical microscopy to biological specimens under physiological conditions have so far been very rare since common techniques for a probe–sample distance control are not as well suited for operation in liquid as under ambient conditions. We have shown previously that our own approach for a distance control, based on a short aperture fibre probe and a tuning fork as force sensor in a tapping mode, works well even on soft material in water. By means of an electronic self‐excitation circuit, which compensates for changes of the resonance frequency due to evaporation of liquid, the stability of the force feedback has now been further improved. We present further evidence for the excellent suitability of the tapping‐mode‐like distance control to an operation in liquid, for example, by force‐imaging of double‐stranded DNA. Moreover, we demonstrate that a nuclear envelope in liquid can be imaged with a high optical resolution of ～70 nm without affecting its structural integrity. Thereby, single nuclear pores in the nuclear envelope with a nearest neighbour distance of ～120 nm have been optically resolved for the first time.     

Nano-slit probes for near-field optical microscopy fabricated by focused ion beams

The near-field probes described in this paper are based on metallized non-contact atomic force microscope cantilevers made of silicon. For application in high-resolution near-field optical/infrared microscopy, we use aperture probes with the aperture being fabricated by focused ion beams. This technique allows us to create apertures of sub-wavelength dimensions with different geometries. In this paper we present the use of slit-shaped apertures which show a polarization-dependent transmission efficiency and a lateral resolution of < 100 nm at a wavelength of 1064 nm. As a test sample to characterize the near-field probes we investigated gold/palladium structures, deposited on an ultrathin chromium sublayer on a silicon wafer, in constant-height mode.     

Dynamic etching method for fabricating a variety of tip shapes in the optical fibre probe of a scanning near-field optical microscope

A novel etching method for an optical fibre probe of a scanning near-field optical microscope (SNOM) was developed to fabricate a variety of tip shapes through dynamic movement during etching. By moving the fibre in two-phase fluids of HF solution and organic solvent, the taper length and angle can be varied according to the movement of the position of the meniscus on the optical fibre. This method produces both long (sharp angle) and short (wide angle) tapered tips compared to tips made with stationary etching processes. A bent-type probe for a SNOM/AFM was fabricated by applying this technique and its throughput efficiency was examined. A wide-angle probe with a 50° angle at the tip showed a throughput efficiency of 3.3 × 10⁻⁴ at a resolution of 100 nm.     

Current-sensing scanning near-field optical microscopy using a metal probe for nanometre-scale observation of electrochromic films

A novel technique for scanning near‐field optical microscopy capable of point‐contact current‐sensing was developed in order to investigate the nanometre‐scale optical and electrical properties of electrochromic materials. An apertureless bent‐metal probe was fabricated in order to detect optical and current signals at a local point on the electrochromic films. The near‐field optical properties could be observed using the local field enhancement effect generated at the edge of the metal probe under p‐polarized laser illumination. With regard to electrical properties, current signal could be detected with the metal probe connected to a high‐sensitive current amplifier. Using the current‐sensing scanning near‐field optical microscopy, the surface topography, optical and current images of coloured WO₃ thin films were observed simultaneously. Furthermore, nanometre‐scale electrochromic modification of local bleaching could be performed using the current‐sensing scanning near‐field optical microscopy. The current‐sensing scanning near‐field optical microscopy has potential use in various fields of nanometre‐scale optoelectronics.     

Separating different contributions to the shear force in near-field microscopy

The shear force between a gold and a graphite sample and an approaching near-field optical probe using tuning fork detection is studied in detail. The adiabatic and dissipative contributions are clearly distinguished by monitoring the amplitude as well as the phase of the tip vibration when approaching the surfaces. Their relative strengths vary differently but characteristically with the distance. The interaction starts in case of graphite at a much larger distance. The adiabatic contribution is larger in the case of gold, whereas graphite shows mostly dissipative interaction. Measurements at various temperatures are performed using a gold sample, showing a dependence of the shear force on the temperature.     

SNOM/SFM结合的近场光学探针

介绍了近年来近场光学探针技术的进展，特别是可与扫描力显徽镜结合的探针制备技术。