Access数据库在采购管理中的应用

介绍了Access数据库的特点和优点,在采购管理中应用的意义.使用Access编写了<供应仓储管理系统>,论述了该系统的设计思想、程序结构及应用效果.该系统的应用,减轻了工作人员劳动强度、提高了工作效率、确保了物资及时供应、减少了资金的占压.     

抓斗吊车常见故障与解决措施

分析了20 t桥式抓斗起重吊车常见故障及原因,采取了相应的解决措施,从根本上杜绝了吊车的常见故障、节约了备件、降低了生产成本、减轻了维修人员劳动强度及提高了企业的经济效益.     

废水处理站自动控制系统的应用

介绍了邯钢冷轧废水站的配套项目废水处理站的自动控制系统,主要从自控设备组成、网络控制系统等方面论述了控制功能的实现,该系统的应用为ERP的数据采集提供了很好的保证,提高了电气控制的集成度和可靠性,简化了控制环节,提高了生产效率.     

“智能巡点检仪开发与应用”项目通过首钢科技成果验收评估

2012年1月9日,＂智能巡点检仪开发与应用＂项目通过了由首钢总公司组织的验收评估。该项目研发的设备智能巡点检仪使用可靠、运行稳定,各项功能和技术指标均达到设计要求,实现了与四级信息化系统的紧密集成和数据共享,提高了数据准确性和人力资源效率;优化了业务流程、加快了信息传递、深化了资源共享,有效减少了设备故障停机时间,提高了设备技术管理水平。     

TRT顶压控制系统及其安全性的研究与优化

介绍了天钢1~#TRT顶压控制系统,对现有的顶压控制系统进行了分析,在原有差压调节模式的基础上增加了顶压调节模式,将实际操作改为差压调节与顶压调节两种互选模式,提高了系统的发电效率;对旁通阀组的控制进行了优化,优化后极大地提高了系统的安全性,保证了炉顶压力的稳定,延长了设备的使用寿命,产生了较高的经济效益。     

ACS6000SD变频器在粗轧机主传动系统中的应用

济钢中厚板厂3500线粗轧机改造主传动系统采用ACS6000SD变频驱动系统,系统的整流侧和逆变侧采用了对称结构,降低了维护难度;采用了IGCT技术,保证了系统的性能响应;使用了DTC技术,提高了系统的鲁棒性。这种交直交系统做到了对电网的最少谐波运行,既减少了对电网的污染,又省去了无功补偿系统的投资。     

新型烧结增效剂的试用研究

介绍了该烧结增效剂的试用背景,简要分析了其基本机理。阐述了该增效剂在马钢的试用情况,并进行了效益评价,同时给出了改进意见。     

工业机器人在鞍钢型钢生产线的设计与应用

根据鞍钢股份有限公司型钢生产线工艺实际,制定了机器人硬件设计方案和机器人软件实现方案,实现了工业机器人自动贴标喷码技术在型钢生产线的应用.该系统的应用满足了产线工艺要求,提升了产线生产效率,提高了产品标识的准确性和可追溯性,贴标准确率和喷码准确率均达到了99％,实现了危险岗位无人作业,作业周期缩短了25％;同时,实现了产品标识的统一规范性,提升了企业产品形象.     

焦炉小烟道"下火"的原因分析及处理方法

分析了天铁1#、2#焦炉小烟道“下火”现象产生的原因,采取了措施加以解决,减少了事故的发生,延长了炉体使用寿命,降低了炼焦热能耗。     

图拉法粒化渣工艺的应用与改进

炼铁厂3^#高炉采用了图拉法粒化渣处理工艺，在设计、安装、试车过程中对其进行了改进。使之满足了生产要求，在15天内实现了稳定生产，取得了预期效果。     

Satisfactions and interests.

The problem of defining satisfaction and the difficulties in distinguishing interests and satisfactions are indicated. "Aside from the final, consummatory activity, satisfaction cannot be identified in terms of activities, as can interests… . Because opinion items are not as stable as interest items, it is doubtful that they can be as useful as interest items in predicting future behavior." 5 characteristics of interests are that they: are acquired, are persistent, vary in intensity, function in acceptance-rejection behavior, are indicated in readiness to act. "Interest tests are diagnostic because no two persons have acquired the same lists of activities nor are the activities classified in the same manner as liked or disliked. Moreover, people engaged in an occupation have to a marked degree similar interests, and so people in one occupation can be differentiated from members of other occupations." Major topics are: job satisfaction and job success; opinion, attitude, interest, and satisfaction; measurement of motivation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

无缝钢管中非金属夹杂物特性研究

峰位于4869 eV位置,对应于元素锡的四价氧化态。锡泥中含有的主要成分为SnO2。     

钨纳米线的制备与应用

综述了钨纳米线的最新研究进展,详细地介绍了数种钨纳米线的制备技术和这种新型纳米材料潜在的巨大应用价值,提出了目前报道的制备方法中存在的几个问题,并展望了未来的发展趋势。     

Stability and Accuracy of Weighted Four-Point Implicit Finite Difference Schemes for Open Channel Flow

The unsteady motion of streams, with a free surface, has been described by a system of equations that were proposed by Saint-Venant in 1871. These are universally known as “Saint-Venant’s equations.” Weighted four-point implicit finite difference schemes are largely used for their numerical solution in the case of one-dimensional flow. For these models, stability, dissipation, and dispersion are first investigated by looking at the truncation error and then by using Fourier’s classic linear analysis. Variations of the space and time weighting coefficients, the Courant number, the Froude number, and the frictional resistance term are examined in this paper. In particular, instabilities are analyzed that are due to the progressive accumulation of dispersion errors, which are the consequence of an increasing frictional resistance term. However, in this case the numerical scheme requires a dissipation mechanism. Computational suggestions are given for this mechanism.     

Where have all the students gone? Positions of psychologists trained in clinical/services programs.

This article presents a variety of findings derived from two outcome studies of psychologists who received their doctorates from clinical/services training programs supported by the National Institute of Mental Health in the years 1968-1980. Comparative data are presented regarding the initial positions and geographical distribution of graduates during this period. Despite some erosion in the market for academic faculty positions, the results show a consistent and extraordinary degree of employment consonant with training and virtually no unemployment. Two thirds of the graduates have jobs in a range of organized settings for service, and over 22% of the remainder are in academic or research positions. The most recent study enables analyses of certain factors influencing the initial location of graduates. Particular attention is paid to three topics of national concern. Criteria are developed for designating rural/small town service providers, and evidence is presented showing that programmatic implementation of this priority in training yields results. The issue of clinical research is discussed; the scope of such research and the extent to which students may be engaged in it are examined. Data are provided on the recruitment of minority students, and factors affecting minority student retention and completion of training are discussed. Outcomes of master's-level training programs are presented separately, and characteristics of training at that level are contrasted with those in doctoral programs. In a concluding section, the findings are discussed in the context of changes in psychology graduate education during the past generation, some current value dilemmas that affect education are explored, and certain implications of the revised national policies for support of clinical training in mental health are reviewed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

客运专线用100米钢轨矫直断裂原因分析

 客运专线用100米60kg/m重轨在焊轨厂拼焊后,当四面矫直时发生断裂。采用光学显微镜及扫描电镜（TEM）等方法对钢轨矫直时断裂原因进行了分析和研究。结果表明：钢轨断裂是由于距钢轨端部约100mm轨底边缘处存在凸台缺陷,此凸台在钢轨拼焊后进行除瘤时除瘤刀将其铲平,致使钢轨产生冷裂纹,进而在矫直时断裂。通过控制万能精轧上下辊的辊径差以及调整轧制线高度等方面,使钢轨出轧机时尽量保持平直,避免上翘或扣头,从而消除凸台缺陷的产生。     

Energy-Efficient Trajectories of Unmanned Aerial Vehicles Flying through Thermals

This study presents optimal energy-efficient flight trajectories of a generic unmanned aerial vehicle (UAV) flying through a vertical moving thermal cell. A two-dimensional point-mass model of a jet-engined UAV in the vertical plane is used. UAV equations of motion and the thermal wind expression are normalized for numerical efficiency and four fundamental parameters are identified. UAV flights through a thermal cell are formulated as nonlinear optimal control problems that minimize the average thrust per unit time, subject to UAV performance constraints and periodic flight boundary conditions. These problems are converted into parameter optimizations and solved numerically. Fuel efficiencies of these optimal trajectories are compared with those of reference optimal flights in the lack of thermal winds. Both constant thrust and variable thrust solutions are obtained. Two patterns of optimal flights through thermals are identified, and their characteristics are analyzed. Both patterns of optimal flights are also explained from an energy maximization point of view. Effects of the fundamental parameters on optimal UAV flights are examined. Results suggest that significant improvements in UAV fuel consumption are possible by taking advantage of thermal energies.     

中国砂岩型铀矿勘探开发现状调研

以大量的国内外文献调研为基础,联系基础地质知识,对关于我国各盆地砂岩型铀矿的勘探开发现状等内容进行了系统梳理分析和总结.明确了我国各种类型砂岩型铀矿的成因类型;详细总结了当前我国的砂岩型铀矿在各个盆地的勘探及开发状况,认识当前我国在铀矿勘探开发工作中所面临的问题,并结合我国当前砂岩型铀矿工作中存在的问题及不足提出了几点...     

Thermodynamic Evaluation of Inclusions Formation and Behaviour in Steels during Casting and Solidification

For demanding applications high steel cleanliness and strictly controlled inclusions are required. Primary inclusions are formed during steel treatments in the ladle. Most of these are removed to the ladle slag or on the lining. However, the rest of the inclusions still remain through the successive process stages, and additionally new inclusions are formed during casting and solidification due to decreasing thermodynamic solubility of oxygen in the steel at lower temperatures, reactions with surrounding slag, refractory materials and eventual contact with air. Inclusions formation and transformation are simulated by thermodynamic calculations in the steel/inclusions/slag system taking into account the solidification phenomena. In this paper inclusions in Si/Mn‐deoxidised steel and Al‐deoxidised Ca‐treated steels are contributed. Calculations are compared with experimental results from steel plants.     

Application scenarios for nonstandard log-linear models.

In this article, the authors have 2 aims. First, hierarchical, nonhierarchical, and nonstandard log-linear models are defined. Second, application scenarios are presented for nonhierarchical and nonstandard models, with illustrations of where these scenarios can occur. Parameters can be interpreted in regard to their formal meaning and in regard to their magnitude. The interpretation of the meaning of parameters is the main focus of this article. Design matrices are used to describe the hypotheses tested in models and to illustrate cases in which parameters are interpretable. Also, design matrices are used to show where and how nonstandard models differ from standard hierarchical models. Coding schemes are discussed, in particular, dummy coding and effects coding. Data examples are given with data and models discussed in the literature. (PsycINFO Database Record (c) 2010 APA, all rights reserved)